My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.
My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.
It is in recovery mode. The picture is telling you to connect to iTunes via micro usb cable in order to restore.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
Similar Messages
-
Display doesn't work after power outage
The electricity was knocked out in my neighborhood for a few hours and when it was finally restored I found that my display no longer works. It is getting no power at all. None of the lights on the front of the display are working--it's totally dead.
No settings or connections were changed during the time when there was no electricity. So it's obviously a result of the power outage, right? I had it plugged into a surge protector (which I thought was supposed to be a safeguard against exactly this type of occurence) so I'm wondering if that has somehow saved me--only there's some secret Mac trick that needs to be done to get my display back to life.
Can anyone please help me? This economy is strangling me to death--I simply cannot afford to buy a new display at this point.I just realized that I never actually asked my question (duu-uuuh):
Can anyone tell me if there is a way to figure out (without having to spend any money) if my problem is only with the power supply or if the entire display is just garbage at this point?
Or perhaps someone has experienced this situation, was able to resolve it and knows what I should do to make my display functional again? -
Imac fan will not stop running after power outage .
unpluuged after we lost power . now the fan runs constantly.
If you note that your Mac fans don't work correctly, do a SMC reset > http://support.apple.com/kb/HT3964
-
My computer is not recognizing my ipod even being plugged in what do i do?
my computer is not even recognizing my ipod is plugged in what do i do?
Here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
A new problem with CS5 forced me to download PScc but the problem is still there. I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10
if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:( -
i want to upload through the photo transfer kit not through itunes and the computer. Thanks
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom -
I just got the iPhone 4. Trying to purchase apps, but keep getting prompts- that he billing address does not match the bank records. Fred close to 20 times. Frustrated !! Am travelling today for 2 weeks. Need this sorted ASAP .
Contact the support staff for the stores at: http://www.apple.com/emea/support/itunes/contact.html
-
Account Information Not Recognized: The user account has been disabled.(FW
Hi Expert ,
I'm working with SAP Business Objects 4.0 SP2 patch 5 and SAP Enterpriseportal. I want to use Single Sign On with trusted authentication in enterprise portal. EP administrator has created an infoview in order to be able to connect the portal and BO.
I have configured trusted authentication in BO but when I try to use the infoview from the portal the following error appear:
"Account Information Not Recognized: The user account has been disabled.(FWB 00012) "
the user used in the sap portal is also defined and active in sap BO.
In order to activate SSO in BO I executed the following steps:
1. Log onto the CMC.
2. Went to the Authentication management area.
3. Select the Enterprise option. The "Enterprise" dialog box opens.
4. Scroll down until I see "Trusted Authentication".
4.a. Click Trusted Authentication is enabled.
4.b. Click New Shared Secret.
4.c. Click Download Shared Secret.
5. Selected Update to commit the shared secret.
6. Saved the trustedprincipal.conf file in the boe server in the path:
'D:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects
Enterprise XI 4.0\win32_x86'
7. Modified the file 'D:\Program Files (x86)\SAP
BusinessObjects\Tomcat6\webapps\BOE\WEB-INF\config\default\global.properties'
sso.enabled=true
sso.sap.primary=false
trusted.auth.shared.secret=
trusted.auth.user.param=
trusted.auth.user.retrieval=REMOTE_USER
8.Restart Tomcat
Please could anyone help me to resolve the issue?
Thanks in advance for collaboration.
regards
gio'Hi Giovanni,
The configuration you have wonu2019t work. You have two different web application servers: Netweaver and Tomcat. Your user credentials are only established in one of them: Netweaver. When you configure trusted authentication in Tomcat you have to authenticate the user in this Web Application server. The REMOTE_USER canu2019t pass from one server to another.
You can confirm this capturing your request using Fiddler in your browser.
If you want to configure the integration BI4 into SAP Enterprise portal, you can follow this guide:
http://wiki.sdn.sap.com/wiki/display/BOBJ/BI4IntegrationintotheSAPEntreprisePortal+7.0.x
Regards,
Julian -
Yesterday I changed my email password on my home computer. Today, I can't get any new emails on my Samsung Galaxy 4; I deleted the email account entirely and tried to set it up again as a new account, using the new password, but it keeps giving me an error message that reads: Cannot safely connect to server. The new password is working on my home computer. I even tried the old password; it just gave me the same error message.
I'm sorry you're having issues with your e-mail account on your phone Rusty1112. Let's figure out what's going on. First, please try deleting account/information again and then restart phone. When phone is back on, try adding e-mail account again, and be sure you're entering exactly as you set up, meaning its case-sensitive. If you're still getting same error, please let us know and let us know what e-mail account it is, Yahoo, AOL, MSN, etc.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport -
I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton -
My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?
Hello:
Try resetting the SMC and PRAM.
Barry -
My Plug in "Free Download Manager" stopped working after update
== Issue
==
I have another kind of problem with Firefox
== Description
==
My Plug in = "Free Download Manager" stopped working after I updated FIrefox !
It worked fine previously ! What did I do wrong ??
**** Also I've forgotten my User name, but Firefox says that my email is registered already
I was on some other Internet provider; and have been a PC user since 1987 ! I am a Retired Network Administrator for both Microsoft NT4 & Novell 4.x Networking; and a former IS Dept. Tech' for an Orlando, FL Corp' that had over 500 PC's;
both Lap & Desk Top for some 3 1/2 yrs.
***** I CONSTANTLY RECOMMEND FIREFOX TO EVERYONE THAT IS EITHER MY CLIENT -- OR ANY OTHER CASUAL CONTACT *****
***** In fact I suggested your Browser to 3 people Today; Wed. the 14th of July 2010 *****
Respectfully;
Raymond E Bachelor
aka "New System Services"
<blockquote>Removed personal info. Please don't out yourself, or post personal info on forums. thanks! -T </blockquote>
== This happened
==
Every time Firefox opened
== I updated Firefox to the Newest Version !
==
== Troubleshooting information
==
PLEASE !!!!
SEND ME MY LOGIN INFO I have an active email entry; but I've lost track of my Username over the years !
== Firefox version
==
3.6.6
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6
== Plugins installed
==
*-Shockwave Flash 10.1 r53
*Adobe Acrobat Plug-In Version 7.00 for Netscape
*Office Plugin for Netscape Navigator
*np-mswmp
*getplusplusadobe16263
*Default Plug-in
*Delivery Network Acceleration by BitTorrent™
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network ObjectI hate it when updates break things instead of fixing them. Can't Mozilla leave well enough alone? At the very least, each new release should be tested so it works with ALL PREVIOUS extensions!
Wait till you "update" to firefox 4 and EVERYthing breaks, including the buttons that come with it. There is no arrow next to the dropdown button, right clicking the tab bar doesn't bring up the correct menu, but one as though it were the menu bar (which is missing) and the information bar is missing. True, it's fast, but you'll spend weeks getting it to work properly. -
Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet. -
After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?
alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again. -
Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?
Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.
Maybe you are looking for
-
Iphone 5 under IOS 7.1.2 Reboots all the time . please help me !
mon Iphone 5 redemarre sans cesse. Je ne peux plus l'utiliser !!!!Aidez moi SVP
-
Having problem with siri on calling someone
Hi.. i'm having a problem with siri when calling someone..it says " i can't call using that number " Im from Mauritius, our mobile number having been migrated into 8-digits since 1 month. I'd turn off siri, reset setting.. its the same! whats wrong w
-
Hi All , I am new to struts. I am trying internalization in struts. Could anyone please tell me the procedure for internalization. I am creating a resource file in classes folder of my application in tomcat 5.o I am adding the configuration parameter
-
How do I enter a simple entry field into my design?
How do I enter a simple entry field into my design?
-
Can't activate my iphone on ios 5... Help pls
I installed ios 5 on my iphone 3gs. Whan i start up iphone i need to choise region, to use location services and more,,,than it need to activate my iphone. But he can't do it becouse now i don'h have service. He says to there is no sim card. And i ca