My Applications folder and Mac HD is gone from finder and cannot locate it anywhere.  Also now getting download errors on everything and they cannot complete.  This happened with iPhoto tonight.  Any ideas?

I don't realize when this started because I don't download apps that often or look for my applications folder.  But I cannot find my HD anywhere.  I know it has been less than two-three weeks since the last time I specifially accessed the applications folder.  Its odd because tonight I tried downloading iPhoto and got an error that it was unable to download ... try again from the app store.  I did this twice with the same result.  Any help would be appreciated. 
Thank you.

Basically I ended up bringing the MacBook into the Apple Store. It was determined something was going wrong with my hard drive and I ended up getting a new MacBook because I could not wait for it to be fixed (I was already starting to get behind on my school work). There was no real solution.

Similar Messages

  • I am developing a book via email with a collaborator. iBooks Files are sent to me via a link to preview on iPad. This worked fine for a while but now getting download errors and the unhappy mac face saying download failed. Any ideas?

    I am developing a book via email with a collaborator. iBooks Files are sent to me via a link to preview on iPad. This worked fine for a while but now getting download errors and the unhappy mac face saying download failed. Any help appreciated. Very frustrating!

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • Since upgrading to OSx 10.9, I cannot place my music for iPhoto slideshows.  The only music that works is the Sample and Theme music that comes with iPhoto.  Any idea of what to do about this problem?

    Since upgrading to OSx 10.9, I cannot place my music for iPhoto slideshows.  The only music that works is the Sample and Theme music that comes with iPhoto.  Any idea of what to do about this problem?

    In iTunes go File -> Library -> Organise Library -> Reorganise Library.
    Then quit and restart iPhoto.
    Credit to user keysandfood who figured that one out.

  • I bought an iphone4 from a friend and he was on orange i have put my o2 sim in the phone and it is saying restricted network with no service any ideas thanks

    I bought an iphone4 from a friend and he was using it on orange i have put my o2 sim in the phone and it is saying restricted network with no service any ideas thanks

    That is because the phone is locked to the Orange network and an o2 sim card is not going to work with a phone that is locked to Orange.
    You either need to purchase an Orange sim card and use that in the phone, or you need to get your friend to contract Orange and get the phone unlocked so that you can use an 02 sim card.
    At the moment you will never be able to use the 02 sim card if the phone is locked to Orange.  Either use Orange or get the phone unlocked.  It is as simple as that.

  • Excel not even open - "cannot complete this task with available resources" and then VBA run-time error randomly appear!

    Has anyone else seen the "Excel cannot complete this task with available resources" error message appear when Excel isn't even open? It keeps happening to me, and it's the strangest thing.
    It seems like interacting with Excel files sometimes prompts it - for example, I just turned on my computer this morning, checked my email, and then opened Google Chrome to upload some Excel files. Excel hasn't been opened at any point since the machine
    booted up, but this Excel error popped up while I was uploading the files.
    Checked the Task Manager because I was baffled (not that this is the first time it's happened), and there's no Excel application running, just that silly error message. Choose OK on that error and a VBA run-time error message appears (not even sure if it's
    Excel VBA or Word/Outlook but I assume it's Excel - it's the good old 1004, application-defined or object-defined error).
    Debug is greyed out, so it won't let me debug to see what the problem is. Choosing End brings the "Excel cannot complete this task with available resources" message back for one final performance.
    This happens on a not-infrequent basis: Excel isn't open, and I randomly get this set of Excel errors: 1) "cannot complete task", 2) VBA run-time, 3) "cannot complete task" again. Then it's done, until the next time it happens. Weird.
    I have 32-bit Windows 7 and Excel 2013/2010/2007/2003/2002 (I know!) but the issue only started after installing 2013. I also get the "cannot complete this task" message regularly when working in Excel (generally with Power Pivot or something legitimately
    memory-hungry though), and restarting the application does the trick. I don't mind a heads-up when I'm gobbling up too many resources, but when Excel's not even open, it's a bit ridiculous. It's like I have a zombie Excel! Does interacting with Excel files
    via upload/moving around Windows Explorer actually trigger some sort of Excel action in the background?
    Any ideas would be most appreciated!! Thank you :)

    Hi,
    As the memory error messages , it can be very generic and don't always identify the real cause of the issue. We may try to use the KB that Mr. KR mentioned above to troubleshoot it.
    On the other hand, if the file is xls format, we may convert to the new file format .XLSM and test.
    http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Excel/Q_28339883.html
    Next, try to disable hardware graphics acceleration from File > Options > Advanced > Display section and disable Aero Themes (if you enabled) to check the results.
    For the hangs and crashes issues, we may use ADPlus.vbs to troubleshoot:
    http://support.microsoft.com/kb/286350/en-us
    http://www.networksteve.com/exchange/topic.php/Excel_cannot_complete_this_task_with_available_resources_error,/?TopicId=39411&Posts=1
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Hope it's helpful.
    George Zhao
    TechNet Community Support

  • Excel cannot complete this task with available resources. Choose less data or close other applications

    Hello:
    I'm using Excel 2010 and when I try to open several workbooks a message "Excel cannot complete this task with available resources. Choose less data or close other applications" appears.  This happens when I open email attachments from MS Outlook
    and files on my C-Drive.
    Thank you for your help

    Hi NFL1,
    Could you tell me which version of office are you using, 32bit or 64bit? You said this issue always happened when open attachments from outlook and files in C-Driver.
    For opening attachments from outlook, it might there is a conflict between the preview pane and Excel. You can try to hide the preview pane as a workaround to solve this issue. Please refer to this link:
    https://support.microsoft.com/en-us/kb/2526883
    It is often the case, if your file is large or contains a large amount of features, it is possible you are running low on available memory resources. If you work with extremely large data sets, the 64-bit version of Office may perform better for you. 32-bit
    office you run are limited to making use of only 2GB of RAM. And this is one of the reasons occur the issue, you can via these links to get more information about this issue and detailed methods to solve this problem.
    https://support.microsoft.com/en-us/kb/2779852
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/22/quot-excel-cannot-complete-this-task-with-available-resources-quot-after-installing-ms12-030.aspx
    Please try these methods and let me know if they work, I am glad to help and forward to your reply.
    Regards,

  • Due to a scam invading my server, Parental Controls is locked and I cannot add this site as blocked.  Any ideas as how I can unlock parental Controls?

    Due to a scam invading my computer recently, I cannot block these site in Parental Controls.  This feature locks immediately and I must use Force Quit to close.  Any ideas as to how to unlock Parental Controls?  The two scams appear to be gone as I can now use Safari.

    howdy my Scotch/Irish brother (I'm Irish descent - actually Norman invader, but hey)
    I'm surprised you didn't ask our gracious Hosts to EDIT the live link in the OP's reply - seems very malicious indeed. I reported it already though asking that it be left as merely a domain name - can't save everyone when the ship sinks
    buenos dias
    ÇÇÇ

  • Since loading Itunes update my Itunes takes about 3 to 4 minutes to load and then when it loads it freezes for about 3 minutes and then unfreezes. This happens with every restart. I've have deleted and reload four times but still get the same  results. t

    Question: I've have upadated to the latest Itunes software but since doing so I've have had nothing but problems and yes
    I have unloaded and reloaded at least 4 times. Now when I try to open Itunes using the short cut on the desk top it takes about 4 minutes or longer for the Itunes to start and then it freezes for about another 2 to 3 mintues and then starts. This happen everytime I try to open Itunes now. I even deleted Itunes from my hard drive and put it on my SSD to see if it would work and still nothing. I've always been pretty good at sloving my problems. But this one has me stumped. Is there anyone who as had this problem that would be willing to help me out. Router25. P.S. It only happen with this one application of software. Everything else loads up fast. This comput is about 1-1/2 years old. Most people would love to have this computer. 9 out of 10.  Please help me someone. I ready have a grey beard and it getting grayer.

    Restore from backup.  If the issue continues, restore as new.

  • I recently deleted a partition on my mac that was intended to install windows. Now it is just blank space. I attempt to resize my Macintosh HD partition to cover entire hard drive space and hit apply but nothing happens (disk utility). Any ideas?

    I have a few problems...
    I wanted to make a partition to install windows, I tried to use bootcamp 5 where it wanted to partition and install windows at the same time. I do not have a cd of windows but instead had it on a flash drive. Bootcamp couldn't find it. Instead I was reading forums and found that there was another way to install windows by partioning your harddrive using the disk utility, downloading the bootcamp drivers, and installing rEFIt (an app that when starting the compouter a menu would come up to boot windows from the flashdrive). I try that and the windows install screen gets me to the point where I pick a partition. I attempt to pick the partitioned drive but a message comes up telling me that "this is of the GPT partition style" and windows cannot be installed on the drive.
    So now I went back to disk utility and deleted the partition but there is still blank space. I wanted to retry and install windows through bootcamp (somehow) but a message comes up that there cannot be any partitions or that a partition must be created using bootcamp. SO i keep trying to drag the partition over the blank space and hit apply but nothing happens.
    By the way I was trying to install windows 8 pro, some forums would say that you cant install win8 however I found others that said you could. How do I fix my partition and how do I use bootcamp to install windows (preferrably 8)?

    Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

  • Updated apps now do not work at all. They crash instantly, don't even open. Any ideas?

    I updated a load of apps a couple of days ago and all of the apps that were updated no longer work. They just blink on and then crash instantly.
    Has anybody else had this problem?
    Any ideas for a fix?
    This is on an iPhone 4s running the latest software iOS 5.0.1
    Thanks,
    James.

    I have the same problem and so far nothing works other than deleting the app and re-installing it which is a MAJOR pain and loses all the apps data.  This even happens with Apple Apps including Find iPhone, Find Friends, Airport Utility, iTunesU, and Cards.  It also happens with MANY MANY MANY other apps.  The genius bar appt I had today was of no help.  I had an iCloud backup of my previous phone but restoring from that backup and restoring to that didn't work.  Figuring I had a bad backup, I generated a new backup from my iPhone 4 and tried to use that backup (also running iOS6) to restore to the new iPhone5 -- but still get the exact same failures. This switch to an iPhone 5 has been nothing but problems and I'm really getting ******.  It just should NOT be this hard.

  • Iphone 4s and Ipod touch - Download error, tap to retry.  Why is this happening?

    Hi
    I have a problem when I am trying to download music onto my iphone 4S.  It sometimes says download error, tap to retry.  Sometimes when i try later in the day it works. My friend also has the same problem with her ipod touch, but hers wont download at all.  Both are up to date with software etc.  Can anyone help?
    Thanks

    Usually when you don't have enough space, your iPad will tell you that.  To be sure, go to Settings > About and see how much space you have left.  If you have more than 5 GB, you likely have enough space.
    I'd try rebooting your iPad and see if that solves the problem.  Press and hold BITH the power and home buttons at the SAME time until you see the Apple Logo, then let go of BOTH buttons and your iPad will restart.

  • I have a iPhone 4s.  When I play a podcast, the audio is speeded up. like playing a 33 record at 45 rpm.  This doesn't happen with music.  Any ideas of how to fix this?

    I have an iPhone 4s.  When I play a podcast, the audio is speeded up, like playing a 33rpm record at 78 rpm.  This doesn't happen with music.  How do I slow it down?

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Hi all- Metastream 3 plugin has been frozen- I cant remove it and cant seem to replace it with something else- any ideas on what I can do?

    Metastream3 is a plug in that is used for a number of online games the kids try to use. They now get the message the plug in has been disabled.
    When I go to the Add Ons/ Plugins- the 'enabe part of the menue is disabled.

    Remove "Viewpoint media player" in Add/Remove (control panel)

  • I recently rented a movie from iTunes but it will not play. I get an error message, number (-42408). What does this mean and what do I do about it?

    I rented Sherlock Holmes: A Game of Shadows and when I tried to watch it, the movie would not play. I received the error message (-42408). What does this mean and what should I do?

    Is all other content purchased using the same iTunes Store account also failing to play with that error message?

  • Apod nano volume varies greatly when jack lead connected, it has only ust started to do this after 3 years, new lead  tried still does it, never happens with ear phones, any ideas please

    my ipod nano 4th generation, volume varies greatly when its connected to a jack lead, the lead has been changed still same, it dosnt do it when connected to earphones, it has just started doing this after 3 years, could it be a dirty or damaged connection into bottom of ipod? im at a loss please help if you can guys

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

Maybe you are looking for

  • Block customer before GI

    I would like to know is any possbile in SAP when create a sales order for COD payment terms, then block the customer before GI until released by someone. Can I do that. thanks!

  • In setting where could i see the shipping cond. displayed as number first?

    Within a SO, currently the shipping conditions displayed as 'Normal Mode'... I remembered that if you setting somewhere, the shipping conditions could be displayed as <b>'01</b> Normal Mode'... As i could see the number..'01'. Do you know where to se

  • Verify signature

    Hi All, I have a requiremnet, in which the invoice document is coming along with a signature. I have to verify the signature and extract the xml data from the inbound payload. Please let me know how can i achieve this. I am refering to the below link

  • XML repot out put printing

    hi all i have developed a xml report and it prints out put down wise but i want to print the data across for example column1 -- row 1-row2--- column2 -- row 1--row2-- thanks for all in advance, maddy

  • Dragon Naturally Speaking 10.1 App-V package - activation

    I've packaged Dragon Naturally Speaking 10.1 using App-V 4.6 SP3, & all functions that I have tested are working normally. However, the one problem I can't seem to get past is that every time my Dragon user logs a different VDI (virtual desktop), Dra