My apps wont open and i keep downloading new apps, hard resetting, syncing and nothing works! PLEASE HELP

My apps wont open and i keep downloading new apps, hard resetting, syncing and nothing works! PLEASE HELP  

Then restore the iPod.  First from backup and if problem persists, restore to factory defaults/new iPod.

Similar Messages

  • Need help with this annoying "determining gapless playback information" freeze and crash error to having to hard reset my computer! Someone please help

    Haven't been able to use itunes for at least 2 months now. I went to upload a newly downloaded album and now itunes freezes on "determining gapless playback information" every single time! Then i have to hard reset my mac every time as well, which i have done a good 30+ times now.  Someone please help me out, it would be much appreciated. i just want to listen to my music again. Apple support is useless and just want money when it's there fault it has happened anyway by applying that useless 'determining' non sense. Please help!

    This is the "iTUnes for windows" forum, If your doing this on a mac, you may get better help in the "iTUnes for mac" forums

  • The App Store want allow me to download new apps because I have not set up security questions.But I share an iTunes account with my friend. So if I set up the questions will my friend have to use and answer the same thing?

    The App Store want allow me to download new apps because I have not set up security questions.But I share an iTunes account with my friend. So if I set up the questions will my friend have to use and answer the same thing?

    They will have to be answered the first time when purchasing from a new computer or device.

  • HT6147 With the latest iOS 7 update (Feb 2014) is anyone else experiencing trouble with the App Store not able even to load updates for existing apps, and unable to download new apps?

    With the latest iOS 7 update (Feb 2014) is anyone else experiencing trouble with the App Store not able even to load updates for existing apps, and unable to download new apps?

    With the latest iOS 7 update (Feb 2014) is anyone else experiencing trouble with the App Store not able even to load updates for existing apps, and unable to download new apps?

  • HT4009 where is the agree button on I phone 4 to agree to new updated terms and conditions for downloading new apps?  read all info all 54pages but no agree button at end?

    where is the agree button on I phone 4 to agree to new updated terms and conditions for downloading new apps?  read all info all 54pages but no agree button at end?

    Try first signing out of the iTunes and App Store in Settings>iTunes and App Stores (tap on your apple ID and choose sign out) then sign back in.
    Then do a hard reset, hold down the home button and the sleep/wake button at the same time until you see a white Apple then release.
    Then go ahead and try again, should work.
    I hope this helps!

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • Ipod nano 5th is unrecognized and rejected after downloading new itunes on Windows 8. Everything works on both- can use ipod and charge, but no recognition, no sync. Whassup? Did something get lost in the itunes update?

    Ipod nano 5th is unrecognized and rejected after downloading new itunes on Windows 8. Everything works on both- can use ipod and charge, but no recognition, no sync. Whassup? Did something get lost in the itunes update?

    I'm having the same problem. I wish someone could respond with a solution for this! I've paid money for new songs and can't listen to them because of this! WTH APPLE?!?!?!?!

  • Itunes won;t open and can't download new apps

    Hi guys,
    I've got a huge problem and I hope I can solve it here. I ve got an ipod touch for smth like 2 months and all of sudden, when i connect it to the PC , itunes isn't starting automatically and i have to do it manually, even though until now it did open automatically. Also, a bigger problem is that I can't download new apps and i can;t update the ones i already have... when i try to do it, it just shows the sign of "waiting" and it frozes like this, so i can't use the app anymore... i tried to reset all settings, to reset the network settings, i searched for a lot of answers on the internet, but my problem wasn;t solved. So, if u can please tell me what should I do, considering that i haven;t tried to erase all content and settings and also my itunes is up to date. If i missed a detail you want to know, let me know, i ll answer, but i hope i wrote everything thatwould be useful in giving me an answer. Thank you!!

    I had a similar problem and ran across this old post from ilounge. I am running Win 7 and lost my playlists to the new upgrade. Then my old ipod died before I could hook it up. When I followed this insruction it restored all my songs and playlists (so there was duplication but I got everything back). Might work for you.
    stfusauce1
    Freshman Lounger
    Join Date: Sep 2008
    Posts: 1
    permalink
        I'm running windows XP and seem to have found a partial solution that does not involve vague half assed directions =P
    Open iTunes, go to file, import, and select the latest "Temp" file, I got most of my playlists and songs back that way.
    Edit: This file is in the \My Documents\My Music\iTunes folder  
      Last edited by stfusauce1; 09-16-2008 at 05:57 AM.

  • No more prompt for pwd to download apps?? keeps downloading new apps withou

    I have lost the iTunes Store prompt to put password when upgrading or downloading iPhone apps. I used to get this message all the time asking if I want to bypass this message and download automatically. Well I finally clicked OK on that message and low and behold it automatically downloads NEW apps that cost money without a warning once you click download. Hmm. I might hit that download by accident.
    Does anybody know how to get this warning back. I already went to reset all warning but it does not seem to affect app download.
    Does this make sense?

    Probably something is wrong with your Internet connection or  you need to sit down and take the time to configure your fresh out of the box machine a bit...
    Mylenium

  • Help! Phone says "Cannot connect to iTunes store" when I attempt to update. Am able to update on computer, and also to download new apps.

    I have been trying to update apps on my phone and get the same message. However, I am
    able to download new apps with no problem. I am able to update the apps on my computer.
    When I synch the phone to the computer, it doesn't update the apps on my phone - I still get
    the same message. Help!!! So annoying,

    Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
    If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and change the date to a few months in the future and then re-trying

  • Updated my iphone 3gs, lost my music and apps, they are backed up on itunes, how do I move them back to my phone, tried to sync but not working, please help

    Updated my iphone 3gs, lost my music and apps, they are backed up on my computer but i cannot move them over to my phone, tried to sync but not working, please help

    well first make sure that when you click on the name of your iphone on the left hand side of itunes that you go to the app and music tab and check mark the sync apps and sync music. then try clicking apply in the bottom right hand corner. then if not try doing it again after going to prefrences in the top menu and going to devices tab and click reset sync history if that doesnt work with music try and drop and drag to the name of your iphone, lastly if that doesnt work you can try restoring from a backup from before you updated. it will keep the new software but put everything that was on your phone when you created the backup back onto your phone.
    http://support.apple.com/kb/HT1351 for syncing music

  • HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help

    Should I use a network switch and plug my Yamaha A/V receiver and Yamaha DVD into it, then into the wireless router? Then the net into the routers net port???

    HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help

  • When my computer and monitor go to sleep, the system locks up and I have to do an hard reset with the power button.  help?

    when my imac and display go to sleep, the computer locks up and will not restart without a hard restart with the power button.  help?

    Hello, what all especially USBwise do you have connected to it?
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons
    Open console in Applications>Utilities, check the system log for the date/time of the last problem  & the Startup right after that for clues.

  • I keep trying to update my itunes and it keeps coming up with error 87... could someone please help me.

    recently i downloaded I.O.S 7 and a few days later it says Activation Error.... This device is not register as part of the iphone developer program. If you are a member of the iphone developer program, please register your device in the iphone developer program portal at developer.apple.com/iphone
    im trying to restore my phone but i cant without the newest version of itunes.... and i cannot download the newest version of itunes cause when i try it says error 87....
    someone please help me would be greatly appreicated

    Hi there exiledsoul,
    You may find the troubleshooting steps in the article below helpful.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    -Griff W. 

  • Youtube and videos keep downloading so that the lecture stops and goes on by "increments"each 2 seconds

    Youtube and videos are not running fluently the way they did.  It goes on downloading each 2 seconds. What can I do to solve the issue ? Thank you for your help.

    Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
    Uninstall the Flash plugin then reinstall new >  Troubleshoot Flash Player | Mac OS
    Very important to uninstall the currently installed plugin first.
    Now launch Safari and try a video.
    If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
    And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to:  Open in 32 bit mode  is selected, deselect, quit then relaunch Safari.
    You may also need to delete the cache associated with Safari .
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy/paste:   ~/Library/Caches/com.apple.Safari
    Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
    Quit and relaunch Safari. Try a video.

Maybe you are looking for

  • How to extract data from ORCL GL in "full" and not "delta " with FDM ERPI?

    Hi I am using FDM ERPI 11.1.2.1 to extrct data from Oracle eBS 11. I can see that FDM ERPI extracts data in "delta mode" using the GL_TRACK_BALANCES_DELTA (FDM adds a row in this table after the 1st load of the period"). Is it possible to force the "

  • Exporting a pdf by echosign

    I have tried repeatively to export a filled out form that was sent to me, to fill out and send back to the sender through echosign. I fill it out but I can not save the information that I placed in the form.  It sends the form, but it sends a blank f

  • IDVD v7.1.2 launch problem

    I used the program successfully two days ago, making a DVD.  Yesterday and today I go to launch and it takes forever eventually I get the message:  Searching for movie data in file "Sequence 1-Fin-0000086".     Earlier this week I updated to all the

  • To HIDE only Value not the Infobject at Query Execution?

    Hello All <b>Case1.</b>I have Infobject-----TOTAL VALUE1---- 100 VALUE2---- 100 VALUE3---- 100 Now at runtime I want to hide VALUE2 only,but the scenario is VALUE2 infobject should display in report without TOTAL i.e.,only the TOTAL value should'nt d

  • Recovery of queue when 1 hub is having problem

    Hi, I need to recover all queue in HUB B and import to HUB A to resume the email delviery. I have tried the following but not working 1. Stop "MS Exchange Transport" service on HUB B 2. Create QueueRecovery folder in HUB A eg. C:\QueueRecovery 3.. Co