My aps won't open. Installed software upgrade last night and now my apps (3G S) won't open
Last night I did a software upgrade and now when I try to open my aps they blink and do not open. What's the fix?
I have a brand new 4G, just got a request to update to OS5.0. so I did that. I can't download a single game, all of which are free. After I get the ridiculous message about "Terms and Conditions" having changed, I accept it but it never does anything, just says "Loading" and never gets the app, it doesn't show up in my download history, and no icons on the screen. Other apps just say "Waiting" and never do anything either. I have an awesome connection and signal to my router, and all other features of the phone work.
Similar Messages
-
I upgraded lasy night and now it will not even open.
I upgraded my Firefox last night and now it wont open. I double click, I right click, nothing. My entire web history is on there. HELP!
Genieo Adware is installed. Removing it will help.
If you have another browser:
Use free AdwareMedic by clicking “Download ” from here
http://www.adwaremedic.com/index.php
Install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
“Quit AdwareMedic”.
or
If you don’t have another browser:
Use another Mac or an iPad.
Open the article,either print it or email the contents to yourself.
Remove adware manually by following the “HowTo” from Apple.
“Remove Genieo, also known as InstallMac”
http://support.apple.com/en-us/HT203987
Safari > Preferences > Extensions
Turn those off and relaunch Safari to test.
Turn those on one by one and test. -
I recently cleared my hardrive and reloaded the install software including snow leopard and now the browser is extremely slow. Any ideas
Your profile says OS 10.5.8, Snow Leopard is 10.6.
After installing Snow Leopard, did you do a software update? Apple menu / Software update ..
If you have not run it yet, do so. It will give you the highest versions of Snow Leopard and Safari. That might help. -
Updated the software on my iphone 4 last night and now none of my purchased apps will open. They start to and then immeadiately close.
Try restoring from a backup. Connect the iPhone to your computer, launch iTunes. Right or control click the iPhone under Devices in the source list then click: Restore from Backup.
-
Firefox auto-updated to 3.6.9 last night and now it crashes every time I open the browser, even in safe mode.
Hi there,
You could try performing a clean installation: [[Knowledge Base Article]] :
Some Firefox issues can be resolved by downloading a new Firefox installer from Mozilla.com, then closing Firefox, deleting the Firefox application folder (program files) and reinstalling Firefox. If this does not help, or if you would rather completely remove Firefox and start over instead of completing all the troubleshooting steps, follow these steps:
1. Download the latest official version of Firefox from Mozilla.com.
* You should avoid unofficial download sites that bundle Firefox with other software such as the Google Toolbar.
2. If you wish to retain your current profile, you should make a backup copy of it. See Backing up your information for instructions.
3. Uninstall Firefox and make sure you remove the Firefox application (program) folder and your Firefox personal data (user data and settings) - see Uninstalling Firefox for instructions.
4. Reinstall Firefox - see Installing Firefox for instructions.
5. When Firefox is started for the first time, the Import Wizard will appear and a new profile will be created.
6. Verify that the issue no longer appears.
7. If you made a backup of your old profile and wish to restore your old information, see Recovering important data from an old profile. For troubleshooting purposes, only copy the files corresponding to your bookmarks and saved passwords.
8. Reinstall your extensions and themes one by one to determine if any specific one is causing the issue.
source: https://support.mozilla.com/en-US/kb/Basic+Troubleshooting?s=clean+installation&as=s#Clean_reinstall -
Good Morning,
I just did a software update on my phone (finally) last night and now my phone will not come on. It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYONE help me please???The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.
-
Hi, I have been using CS5 for a while now, but had to wipe my computer clean last night and now am unable to re-install my adobe on the same computer. Help please.
Can you describe more about what you summarize as "unable to re-install my adobe on the same computer." ? What actions do you take and what results? What messages do you get? Are you able to install it on a different computer?
Since you use the word "same", it might be a case that you do have another machine that the install is functional on. If so, or even if you installed a couple of times on the same machine, it might be a case where your activation allowance has been used up and you need to have them reset. If you contact Adobe Support thru chat you can ask them to reset your activations so that you have the two allotted to you available again.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Installed Office update last week and now Word crashes every time I use it
Installed Office update last week and now Word quits unexpectedly every time
Have you checked Microsoft office for mac support? http://www.microsoft.com/mac/support
-
Just installed latest upgrade to iTunes and now it will not open
Just installed the latest upgrade to itunes and now it will not open. I have followed all of the troubleshooting steps i could find online and still nothing. I have even restored my computer three times to 3 different restore points and that had no effect. Please help.
Hi Jeff,
see for your problem:
http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
it worked for me.
Grtz -
I just updated my software, and now my apps won't work. They just open the close quickly....I've done a force quit, but it stills doesn't work! What can I do?
Have you tried a reset?
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
I updated to MacBook pro last night and now safari won't open
I updated my MacBook Pro last night and since I did this I can not open Safari. It crashes and sends a report to Apple. Not tech smart enouh to figure it out can anyone give me simple suggestions?
ted39 wrote:
I updated to OS 10.8.2 and now Pages won't open
Please elaborate on what exactly you mean by it "won't open".
Do you try to launch it and get an error message from the Finder (for example, something like "This application is damaged and cannot be launched....")? Does an icon for the application ever appear in the Dock when you try to launch it? Does it start to launch and then immediately crashes (Finder will display an "unexpectedly quit" dialog)? Or does it start to launch and never seems to "finish" launching (in other words, it basically hangs and is unresponsive)?
If the application crashes, please post the contents of the crash log here.
Otherwise, if the application seems to be hanging, can you, before attempting to launch it, open the Console.app application (it's in the /Applications/Utilities/ folder), and see if anything is reported when you attempt to launch it? If so, please post it here. -
I up loaded iOS7 last night and when I opened my iPad this morning, I was ask for a password. The problem is, I did not set a password and when I used the 4 digits I would normally use, the i-Pad disabled and I cannot get it open. Can anyone help?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Even with a brand new computer, Firefox frequently hangs and/or quits spontaneously. I downloaded the latest update last night, and it worked okay for about a half hour this morning, then quit.
Do you have Internet Security Software turned on in your Internet Explorer?
I turned mine off, as I have Norton AV. Go into Internet Explorer and check to see if you have that on and try turning that off...and then try to get back onto FF. You may have to restart your computer, I'm not sure, as I'm not a techie. I just know that the Internet Security Software clashed with my Norton AV.
Good luck!!!
Donna
PS Go with the user's suggestion above me, sounds the right way to go...thank God for the techies, eh? :) -
Installed kb2990942 Last night and now build fails
kb2990942 was automatically installed last night, and in that the System.Web.Mvc dll was updated from version 3.0.0.0 to 3.0.0.1. This caused my builds to fail. I believe this will happen to all the MVC 4 and 5 projects as well.
I can update the reference, but if I do that, locally it works, but the build machines fail. If I install kb2990942 on the build machines (they are on a different patch schedule), then the other builds that run on there will be broken.
Was there a reason the version changed?
Is there a way to make it so the build will work with either 3.0.0.0 or 3.0.0.1 installed?
This seems to be shortsighted on the part of MS that would require every build machine and project to be updated.Hello,
This seems to be a problem with the windows update, maybe it's a bug, but it's not related to Visual C#. I'm moving it to [where is the forum for...] where the moderator will direct you to the right forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Updated and back uped phone last night and now have lost all photos and aps. What happened
backed up phone last night and lost all aps, contacts, and photos. What happened
The phone was not restored from the backup.
Frankly, unless the user actually copies the pictures off the device to the computer, there is no guarantee they will return. They should return when restored from backup, but it's not a risk that most intelligent people are willing to take if the photos are considered valuable.
Apps may not be syncing due to the "Sync Apps" option being deselected.
Maybe you are looking for
-
How to implement multi-source XSLT mapping in 11g PS3 BPEL ?
Hi How to implement multi-source (single destination) XSLT mapping in 11g PS3 BPEL ? Is there any good example step by step ? thx d
-
I want to display header information of My ALV Report center Aligned.
Hi all, I want to display header information of My ALV Report center Aligned. How can I do it..Also I want to show two different Layout display of ALV report according to the Radio Button Present in the selection screen.. Pls help me out in this.
-
Shoul order type be part of release strategy or WF logic?
Hi, In our release strategy for purchase order we have set up anything that is > £500 needs approving. This kicks of the standard PO wf, but the workflow should also only start if the order type = NB or 8000. Can anyone tell me if the order type shou
-
Dynamic Quorum and new DAG (no CNO)
With Exchange 2013 SP1 on Windows 2012 R2, you can create a DAG without a CNO. Which is great, I no longer need a CNO or IP address for my DAGs. Which should make it much simpler to have a stretched DAG. However without the CNO, I cannot figure ou
-
Can i make all inboxes the default that opens each time i open mail
Can I make "all inboxes" the default that opens each time I check mail?