My archive zip's stopped working...

Everytime I try to make an archive of something it comes up with an error message of "The archive's list of contents cannot be created" HELP!... It worked fine before and now I can't compress anything

Welcome to Apple Discussions!
One thing to try is to go to Disk Utility and verify permissions and repair if necessary, just in case there is a permissions problem.
If that doesn't help, it may be that your software has become corrupted. In that case, you could consider backing up all your data and doing a clean install of the OS. Or perhaps a software expert on the forum might have a less drastic solution.
Good luck!

Similar Messages

Archive Utility has stopped working

Hi Folks,
Any idea how to reinstall this program? It hass topped working - I double-click on a .zip,for example, and Archive Utility opens up - but just hangs in what appears to be a state of starting the decompression process. Force Quit is my only option. I'd like to get this working (and not replace it with something else). Is there a preference file or something that can be tossed? Can I reinstall it?
Thanks.

Something to try, if you are still being plagued by this ... open up the Activity Monitor and check the System Memory pie chart ... if there's no free memory remaining, click on either the Real Mem or Virtual Mem column headings, to sort it by memory use, and see if there's anything gobbnling up all your free memory.
In my case, it was the Dashboard, and I had to empty it of widgets to get it to stop grabbing memory "to infinity and beyond". I have no clue as to how or if that was connected to the Archive Utility problem, but I was unable to have a single active widget (or any kind) until I repaired permissions and restarted. Then I could add widgets, and the Archive Utility coincidentally began working again.
Interestingly enough, it was only in the de-compressing of files that my Archive Utility was bonkers. It could compress files all day long without trouble.
As I said, I have no clue as to what the interaction could be -- or even if there was one -- between the Dashboard, Archive Utility and the permission repairs, that lead to all of these things bing cleared up. But looking at the Activity monitor is an easy way to begin to track it down, or at least look for other things that have run off the rails ....

Archive Film Widget Not Working

My Archive Film Widget stopped working. Now it's just a blank yellow rectangle without any text...
Anyone have information about this? Has it been suspended or forgotten or shut down forever?
Thanks
d
iBook G3, eMac 1.33 Mac OS X (10.4.3)

Perhaps the site the widget gets its data from has changed or is down.
Maybe post in the feature films forums on archive.org or email [email protected] Scott is usually pretty good about replying.

How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

Steve,
I appreciate your answer. While it might work, I'm a bit hesitant to remove the other programs as a possible solution since they are all currently working.
With Acrobat 9 Pro failing with the OS 10.7 upgrade, I'm hoping that there is a less severe solution.
Since the trigger appears to be 10.7 and may have something to do with the discontinued support of Rosetta, I could be spending a few hours working on a reinstall without a change. Yes, it might work. The "might" is the part that makes me hesitate.
Is anyone else out there on OS 10.7 and running Acrobat 9 Pro? Any issues with anyone else?
Thanks Steve. I do appreciate your offering a solution. I may end up trying it if nothing else comes together.
Mark

Somehow the tabs have stopped working. I can't open a new tab by klicking the + sign or through archive/new tab

Hi
The tab function has stopped working. i can't open a new tab by klicking the + sign, through archive/new tab or by using CTRL T.
i've tried to uninstall Firefox an reinstall it by with no success. seriously need help with this. because we use firefox a lot at work because certain software/websites that we work with only work in your webbrowser.

I had to uninstall the Ask toolbar, not just uncheck it under Tools. Once I uninstalled it, the new windows tab worked.

Yahoo messenger voice chat stopped working (after archive & install)

I have an iMac5 Intel Core 2 Duo 2.16 GHz. I (actually my wife) was using Yahoo Messenger v3.0 beta 4 (built 156957) for all chat and voice chat. About 2 months ago voice chat stopped working. when i send invite, it keeps ringing (but the receiver never sees any invite). When the other person sends me an invite, I don't get anything.
I have downloaded Gizmo, but it also keeps "connecting...".
About 2 months ago, I had to archive and install to solve a Java update issue which was causing wierd problems. Thanks to BDAqua's advice I managed to resolve that. I have J2SE 1.4.2 and 5.0; everything else is working fine.
What can cause voice chat to stop working? Is there some vc plugin in library that needs to be there, which has disappearted after my "archive and install'? Please advise. thanks Fahd

Hi again Fahdali,
Have you tried reinstalling it since then?
http://www.apple.com/downloads/macosx/email_chat/yahoomessengerformac.html
Or...
http://wiki.answers.com/Q/CaniChat_be_used_with_yahoomessenger

Internet Explorer has stopped working on home computer - is it possible to download firefox & then burn to zip drive & install from there?

I cannot get to the internet because MS Internet Explorer has stopped working & I would like to use firefox anyway. Is there a way to install from zip drive? I am using Windows 7

The Firefox download is the complete installer, and yes, you can run it from external storage such as CD, ZIP, or USB flash drive. https://www.mozilla.org/en-US/firefox/fx/#desktop
You probably want to get IE repaired as well, since Windows uses the components of IE to check for updates, among other things. This isn't the best forum for Windows help. You could try here: http://windowssecrets.com/forums/forumdisplay.php/52-Windows-7-Forum

Console Application Stopped Working : Problem Event Name: CLR20r3

When executing the SMSConsoleApplication.exe on my server (via rdp) the process opens and closes within a few seconds by monitoring it via task manager.
This happens when I run it as my user or as local admin in the server.
When I execute the app on a different server (via rdp) from the shared directory or from a local copy, I receive the following error when executed as my user or as admin:
Description:
Stopped working
Problem signature:
Problem Event Name:                        CLR20r3
Problem Signature 01:                       smsconsoleapplication.exe
Problem Signature 02:                       1.0.0.0
Problem Signature 03:                       536332ab
Problem Signature 04:                       System
Problem Signature 05:                       2.0.0.0
Problem Signature 06:                       506c18e6
Problem Signature 07:                       1fc1
Problem Signature 08:                       1c8
Problem Signature 09:                       System.Net.WebException
OS Version:
                    6.1.7601.2.1.0.274.10
Locale ID:
                  1033
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi Sasikala,
The forum supports .net framework setup. I think your issue is not about the installation of .net framework.
You could use the .NET Framework Setup Verification Tool to verify the installation state of one or more versions of the .NET Framework
Download from :
http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-99-90-04/netfx_5F00_setupverifier_5F00_new.zip
More information is in the blog at the following locations.
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx
I think your error is about your code. Have you debugged your code? And what the detailed error message did you get? What technique did you use in your code? WPF? I suggest you go to the related forum for better support.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Merge to HDR Pro suddenly stopped working

I've notice that this seems to be a problem, but nowhere have I seen an answer that resolved it, so I thought it is worth posting again. Merge to HDR Pro is why I pay for Adobe CC and if it can't be made to work reliably, I'll stop paying!
Here is what happens:
3-5 images selected in Photoshop Lightroom
"Edit In" ==> "Merge to HDR Pro in Photoshop" selected
Photoshop opens and opens the images in separate layers
Photoshop goes through the alignment process
Photoshop clears out all the data and returns to an empty state (rather than opening the Merge to HDR dialogue page).
Now I have had it working perfectly for months, all of a sudden yesterday, in the middle of a session it stopped working.
If I use Photoshop to File | Automate | Merge to HDR Pro, same process happens - does everthing except the critical step of taking you into the HDR window.
I'm using Windows 7 with an Intel i7 processor and 8GB memory, most allowed by Photoshop. Nothing changed to cause the problem.
Adobe - need this resolved urgently please. Thanks.

I have also encountered this problem today working with a batch of .NEF files, using File > Automate > Merge to HDR in CC 2014. Same problem running from the Bridge > Tools menu. I suspected an issue with scene complexity for alignment until I checked this post.
The first merge processed fine. A subsequent one failed at the point of aligning the source Layers and did not pass to the Tone Mapping dialog. Re-trying the original batch then also failed - Huh ?
I tried an archive set of brackets and they worked OK. I also converted the .NEFs > .PSDs and that worked OK.
I would be interested if the O/P or yourself would try a merge from the following :
https://dl.dropboxusercontent.com/u/4333045/NEFs.zip
Thanks

Archiving/zipping to different folder

Hello
Normally the Finder Archive function (accessible e.g. from contextual menu in Finder) archives to a .zip archive in the same folder as the original object being archived.
The Finder Archive function use BOMArchiveHelper, which is in:
/System/Library/CoreServices/BOMArchiveHelper.app/Contents/MacOS/BOMArchiveHelpe r
So the same archiving can be achieved in an AppleScript by the following statement:
do shell script "/System/Library/CoreServices/BOMArchiveHelper.app/Contents/MacOS/BOMArchiveHel per" "theUnixname"
where theUnixname is the Unix name of the file or folder being zipped. This works.
My question is the following: Is there any option to BOMArchiveHelper that permits the resulting file to be in a different folder than the original file or folder? This would permit archiving directly to another disk, e.g. an external hard disk, without first copying the uncompressed files or without using disk utility to make a compressed disk image.
(The reason I would like to use the zip files is that they are more universal than the compressed disk images. And I want to use BOMArchiveHelper rather than another ZIP program such as ZipIT because the Macintosh structure with resource forks is preserved by BOMArchiveHelper in a way that still permits the ZIP archive to be opened on e.g. a Windows or Linux machine, which is not the case for the MacBinary implementation in ZipIt).
Thanks in advance

I think you can use a shell-like command in an AppleScript.
In this command you could use gzip "sourcefile" > "targetfile"

"Skype has stopped working" Error Message Windows 8.1 Skype 7.6

Hi, I just now installed the desktop version, I was previously using the other Windows 8 version, not sure what it's called but that doesn't matter. I was trying to call my friend and it said there was a problem with my mic. Well I bought a new mic and came home and it said there was a problem with my mic. I uninstalled it and installed the desktop version, thinking it would work better, but the desktop version tells me that it cannot detect my soundcard and to reboot my laptop. Upon starting up at the welcome screen, I continued to log in, and wait for my programs to load up. I opened skype, it closes without showing up, three more times I do this before running as admin. It tries to load and then gives me the crash report "Skype has stopped working" and says windows will let me know when they find a fix.

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Windows 7 - browser stops working still connected

As the title says Windows 7, browser stops working after some time passes.
This effects IE and Chrome. I can still ping www.google.com or it's IP address. (all other computers on the network are fine)
I've used both the wired and wireless connection without the same results.
I reboot and it works, I walk away from the work station and then boom no browsing.
I've turned off the firewall, released and renewed the IP, netsh winsock reset none off this worked.
I've gone into internet options and ensure that no "proxy' boxes are checked.
I've uninstalled the network card drives and restarted the machine.
I've ran Malwarebytes (no infections), ccleaner to check for registry problems. Nothing there.
I've disabled the power saving options and uncheck "let windows turn this device off"
I've also ran Norton and Mcgafee uninstallers just be sure there aren't any residue from those installed.
No bittorrent clients
So I'm online but can't browse on this one computer? what's the deal please Help!

ctrl+alt+del to display the tasksmanager...Processes tab,
any google processes running? googletoolbarupdater.exe (x86 or x64)?
any other suspicious/unknown processes running? see why not to use ccleaner on win7 machines http://forums.steampowered.com/forums/archive/index.php/t-971768.html spybot S&D installed? turn off 'Teatimer' Tools>Internet Options>Security tab, click "Reset all
zones to default".... there are security zone settings for meta refresh. running IE in noAddons mode is the first test (close all open IE windows first, if using IE8 reboot your computer to clear any hidden IE crash recovery processes or use the taskmanager
to kill any orphaned IE processes) Start>Control Panel>Sharing and Networking>run the diagnose connection problems tool to diagnose network connection issues. IE9....f12 to display the developer tool>Networking tab, click "Start Capturing"..... to trace network
requests and responses. IE8 and earlier.... download fiddler from http://fiddlertool.com HTH
Rob^_^
also Tools>ActiveX filtering (enable/disable) google.com injects an ActiveX 'object' (googletoolbar.dll) that tracks your search and surfing history, in their search and results pages.

Get error "Firefox has stopped working" under Windows 7

I'm running Firefox 3.6.10 (just upgraded, I was at 3.6.9) and every so often (maybe 1-2 days), Windows 7 decides to crash it with the error "Firefox has stopped working". Firefox itself does not seem to be generating a crash id, which is disappointing since that way it would be reported. I run a LOT of tabs, at the moment I have around 100 open. I notice that the CPU usage seems to get very high (it shows 25% for me, but I have a quad core machine so I guess that is 100% of one CPU) as well as memory (1.5gb). It's almost as though Windows thinks that Firefox has stopped responding because of the high CPU usage and decides to terminate it.
I've seen some posts here reporting similar problems, but no resolutions. I also saw a post elsewhere suggesting disabling throttling in Windows but saw other posts saying that had not solved the problem.
Any suggestions on how to fix or troubleshoot this problem?

I have this problem too. Now i'm using win7 64 bit, i installed the newest firefox 6.0.2 and yahoo messenger 11 -> i got this problem. First time i think this is a firefox's error. I decide to use process hacker (a mini tool to manager running process) to find out what is happening and i found this: the program name "YahooMessger!.exe" run a few second and it calls the firefox crash popup lol. I uninstall the firefox and i see "YahooMessger!.exe" auto run in process hacker! ^^ conclusion: i uninstall Yahoo Messenger 11 and delete two folder of yahoo in my username's document (1 of them have the program "YahooMessger!.exe"), reinstall firefox and get out this problem!
So my question is: what is "YahooMessger!.exe", is it a yahoo's part, is it a spyware or virus? Here is the link of this file, i have archived it with winrar http://www.mediafire.com/?lf8tc9fal5rxlup

Error: OUI.exe Stopped Working 11g R2 32-bit Client on Win 7 64-bit

I am receiving an error "oui.exe stopped working" when running setup.exe to install Oracle 11g R2 (win32_11gR2_client.zip for Win 32-bit) client on Windows 7 Enterprise 64-bit. I never even get as far as the Oracle installation dialog box. I am trying to install 11g R2 32-bit because it is my understanding the 64-bit version of Oracle client is not compatible with Toad for Oracle.
I have read numerous posts on the subject and have tried just about everything I can think of to get around the error. When I run the setup.exe -debug I can see that teh files are unzipped and the installer seems to fail when it hit the section where it tries executing java.exe. Once the dialog box appears with the error message, I am not able to get back to the command window to extract the debug results. I can only see it partially in the background behind the dialog box. When I hit cancel to close the error dialog, the debug window also closes, so no way to get the details of the debug results
I am logged into Win 7 as a member of the Adminstrators group and have verified that the Windows User Access Control (UAC) is turned off. I get the erorr message whether I run as Administrator or not. I have unzipped all the files and folders under the \client directory from the zip file to a folder c:\temp\. So the setup.exe and all folders below it are in the c:\temp directory. I did this because one post suggested an issue with long path names or path names with spaces when executing setup.exe.
Seems like it should not be this difficult. I never had issues in the past installing Oracle client on Windows XP Pro. This is my first attempt at installing under Win 7.
Any help or direction would be much appreciated.
Edited by: user10421280 on Nov 21, 2011 1:27 PM

orafad and PavanG,
First let me thank you both for your multiple attempts to help me. I finally figured out what was causing the issue with the Oracle Installer, oui.exe not running properly. Last night I was looking around into the Windows Event Viewer and found an Error entry for oui.exe that pointed to a program directory and .dll in the \\program files\appsense\ directory path. It seems that in addition to the McAfee virus scan, host intrusion, unwanted programs, group policy manager, etc., there is another application installed on the machine that governs what programs can and cannot run. I don't know much about it other than when the program was temporarily suspended, the setup.exe and oui.exe install kicked off fine without the "oui.exe stopped working" error message. It proceeded happily to the Oracle Client installation dialog. All along our IT desktop support was trying to help me with the install and they repeatedly disabled the McAfee programs to no avail, but not the other utilities. It was almost like even they were unaware of this other application running in the background since they never suggested disabling it.
Either way, I'm happy to say that I am now able to successfully launch the Oracle Client installer without issue. I've also learned a little about getting the Oracle 11g Instant client to work with Toad while I worked through the issue with the installer. I could almost get by completely with just using the Instant Client if I didn't have to use SQL*Loader (sqlldr.exe) and tnsping.exe. Any suggestions for getting these two functions to work with the Instant Client would be appreciated. I tried copying the binaries and the message files into the appropriate instant client directories, but windows kept complaining about missing .dll's when I tried executing the commands.
If there is no workaround for getting these functions to work with the Instant Client, and I have to do an Oracle Client install, at least now I can. Do you know if I would need to do the full "Administrator" install to get these functions, or can I do just the "Run Time" install to get sqlldr and tnsping?
Thanks again for your help

Upgrade 10.3 to 10.4: Kerberos authentication stopped working

Hello:
I upgraded a G5 XServe from 10.3.9 to 10.4. It almost worked - ie: system booted again, all disks are visible, etc. But, trying to log on with a user in the OD hosted on that machine has stopped working... this happens when I try to mount a shared AFP volume, and also when logging on from a 10.4.8 client bound in Directory Access to that server. Logging on under the admin account at the console (over ARD in this case), or via ssh, works fine. I didn't think to try other accounts via that method, I will do this tomorrow morning local time and post a followup.
Upon connecting to the server with Server Admin, a message told me that there were new services which needed kerberizing, and to go to Open Directory and click 'settings'. I did this, and also looked at the overview: netinfod was in local-only mode, while all the others were marked as "Running" (lookupd, slapd, Password Server, Kerberos). In the old 10.3.9 system (ie: where user authentication is working OK), all are marked as "Running".
I clicked the "Kerberize" button, and entered a directory admin username and password as instructed. I think the process completed (unfortunately I didn't get a screenshot). Now, the kerberize button is gone.
At various times when admin passwords were requested, I have to try several; the expected ones didn't always work. Eg: I thought the "diradmin" account was needed in one dialog, but I used the system "admin" account instead. (Sorry, didn't record proper details of those events).
Forward and reverse DNS lookups with the host command work ok - they return the expected IP address.
I looked through a bunch of logs (/var/log/*.log, /Library/Logs/.../*.log), and found a few lines with possible clues... these are shown further down.
I have now tried updating to 10.4.8 (I'm not sure if I should have done it before kerberos was going again, but getting the system up to date does seem prudent). Errors are all exactly the same.
Any hints or suggestions much appreciated! Here's some promising things I've found, which I'll be studying today. I hope to take the server down tomorrow morning again to try this stuff out...
http://lists.apple.com/archives/macos-x-server/2006/Feb/msg01152.html
http://lists.apple.com/archives/Client-management/2006/Sep/msg00013.html
Thanks,
Ralph
/var/log/system.log:
Mar 10 15:18:37 tararuas krb5kdc[84]: no sockets set up?
AppleFileServiceAccess.log:
IP 130.195.240.52 - - [10/Mar/2007:15:15:15 1200] "Logout test333" -5023 0 0
IP 130.195.240.52 - - [10/Mar/2007:15:24:30 1200] "Logout ralphwahrlich" -5023 0 0
FWIW, the AFP Reference gives error -5023 meaning thus: "UAM failed (the specified old password doesn’t match); no user is logged in yet for the specified session; authentication failed; password is incorrect."
From slapconfig.log (slightly edited for brevity):
slapconfig.log:
2007-03-10 14:51:52 +1300 - slapconfig -migrateldapserver
2007-03-10 14:51:52 +1300 - 1 Removing LDAP server from search policy
2007-03-10 14:51:52 +1300 - 2 Data export
2007-03-10 14:51:52 +1300 - command: /usr/sbin/oldslapcat -c -l /var/db/openldap/migration/backup.ldif
2007-03-10 14:51:53 +1300 - Removed file at path /var/db/openldap/openldap-data/__db.001.
2007-03-10 14:51:53 +1300 - Removed file at path /var/db/openldap/openldap-slurp/replication.log.lock.
2007-03-10 14:51:53 +1300 - command: /usr/sbin/NeST -pwsrekey
2007-03-10 14:51:55 +1300 - NeST command output:
nothing found to load
2007-03-10 14:51:55 +1300 - 3 Data import
2007-03-10 14:51:55 +1300 - command: /usr/sbin/slapadd -c -l /tmp/backup11774.ldif
2007-03-10 14:51:58 +1300 - 4 Updating LDAP configuration
2007-03-10 14:51:59 +1300 - Starting LDAP server (slapd)
2007-03-10 14:52:22 +1300 - 5 Updating data in LDAP
2007-03-10 14:52:22 +1300 - command: /usr/bin/ldapdelete -c -x -H ldapi://%2Fvar%2Frun%2Fldapi cn=ldapreplicas,cn=config,dc=geo,dc=vuw,dc=ac,dc=nz cn=passwordserver,cn=config,dc=geo,dc=vuw,dc=ac,dc=nz cn=passwordserver_4AB32E0671171DC872A9D40CC42F9E07,cn=config,dc=geo,dc=vuw,dc=a c,dc=nz
2007-03-10 14:52:22 +1300 - ldapdelete command output:
ldap_bind: Can't contact LDAP server (-1)
2007-03-10 14:52:22 +1300 - ldapdelete command failed with status 1
2007-03-10 14:52:22 +1300 - command: /usr/bin/ldapadd -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2007-03-10 15:03:55 +1300 - slapconfig -setmacosxodpolicy
2007-03-10 15:03:55 +1300 - command: /usr/bin/ldapadd -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2007-03-10 15:03:55 +1300 - ldapadd command output:
ldap_modify: No such object (32)
matched DN: cn=config,dc=geo,dc=vuw,dc=ac,dc=nz
2007-03-10 15:03:55 +1300 - ldapadd command failed with status 32
2007-03-10 15:04:13 +1300 - slapconfig -kerberize
2007-03-10 15:04:13 +1300 - Error: Incorrect username or password. You must enter a directory domain administrator username and password.
2007-03-10 15:05:25 +1300 - slapconfig -setmacosxodpolicy
2007-03-10 15:05:25 +1300 - command: /usr/bin/ldapadd -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2007-03-10 15:05:25 +1300 - ldapadd command output:
ldap_modify: No such object (32)
matched DN: cn=config,dc=geo,dc=vuw,dc=ac,dc=nz
2007-03-10 15:05:25 +1300 - ldapadd command failed with status 32
2007-03-10 15:05:38 +1300 - slapconfig -kerberize
2007-03-10 15:05:38 +1300 - Error: Incorrect username or password. You must enter a directory domain administrator username and password.
2007-03-10 15:05:44 +1300 - slapconfig -kerberize
2007-03-10 15:05:45 +1300 - Removed directory at path /var/db/krb5kdc.
2007-03-10 15:05:45 +1300 - command: /sbin/kerberosautoconfig -r GEO.VUW.AC.NZ -m tararuas.geo.vuw.ac.nz -u -v 1
2007-03-10 15:05:45 +1300 - kerberosautoconfig command failed with exception launch path not accessible
2007-03-10 15:05:45 +1300 - command: /usr/sbin/kdcsetup -f /LDAPv3/127.0.0.1 -w -a admin -p ** -v 1 GEO.VUW.AC.NZ
2007-03-10 15:05:47 +1300 - kdcsetup command output:
Contacting the Directory Server
Authenticating to the Directory Server
Creating Kerberos directory
Creating KDC Config File
Creating Admin ACL File
Creating Kerberos Master Key
Creating Kerberos Database
Creating Kerberos Admin user
WARNING: no policy specified for [email protected]; defaulting to no policy
Adding kerberos auth authority to admin user
Creating keytab for the admin tools
Adding KDC & kadmind to launchd
Adding the new KDC into the KerberosClient config record
AddKDCToConfig: KDC is already present in record
Finished
2007-03-10 15:05:47 +1300 - command: /usr/sbin/mkpassdb -kerberize
Mac Mini G4 1.25GHz Mac OS X (10.4.8)

Thanks heaps for your reply
Yes, I did indeed use CDs.
I followed the instructions at http://docs.info.apple.com/article.html?artnum=301909-en , but struck problems...
Step 16:
here's what I got after pressing CTRL-D:
ldap_add: Server is unwilling to perform (53)
additional info: no global superior knowledge
I thought I'd press ahead anyway... and struck the next problem:
Step 18:
here's what I got when attempting to add a record in /AccessControls.. a dialog box that said this:
Record type not mapped
The record with type "AccessControls" is not mapped. Your should report this error to the administrator of your directory server.
I found the following:
http://docs.info.apple.com/article.html?path=ServerAdmin/10.4/en/c7od31.html
step 8 on that page, bullet point starting with "To add a mapping for a record type ..." seems what I want, but have no idea which object class name to use.
Not sure where to go next. I'm somewhat inclined to blow away the OD database, and rebuild it from a backup. I would do this...
On the 10.3.9 system:
- export the OD from WGM
Go into 10.4.8, and:
- in Server Admin, change OD to be standalone only
- reboot
- go back to Server Admin, change OD to be a OD master
- import the records exported from the 10.3.9 system
I will post another update tommorrow.

My archive zip's stopped working...

Similar Messages

Maybe you are looking for