My artwork no longer displays correctly after updating to iTunes 10.5.

With the most recent iTunes update, the artwork is no longer displayed properly.  The songs on my hard drive display fine in iTunes. However, the artwork for songs on my iPod do not display in iTunes (I have limited space on my computer's hard drive, so when I manually add songs to my iPod, I delete them from my hard drive, therefore the songs on my drive and on my iPod are different). Thankfully, the artwork does display properly on the iPod itself.  So it is not a corrupted artwork issue.  When I am playing a song from my iPod through iTunes, it WILL show the artwork, but ONLY if the playing song is highlighted.  Once I highlight another song, the artwork display window goes blank. This is regardless of whether the artwork window is set to "Now Playing" or "Selected Item."  Also, if I change the window setting to "Now Playing" and I highlight a song other than the one playing, the window automatically reverts itself back to "Selected Item" and again no longer displays the artwork (unless I go back and highlight the currently playing track).  Additionally, when adding artwork through the "Get Info" display for groups of songs, it will not display the artwork in the "Get Info" box after I have added it to the file(s) as it used to do prior to updating the software.  This is true for songs both on the iPod and on my hard drive.  The artwork is indeed being added, because when I click "ok" and then play (and highlight) the song, the new artwork displays.  This is really frustrating!   (I should note that I tend not to use "automatically download artwork" because most of the music I listen to is quite obscure and often does not have artwork available by iTunes without me adding it myself).

PLZ FIX THIS APPLE!! WE, YOUR CUSTOMERS LIKED IT BETTER THE OLD WAY!

Similar Messages

  • Display no longer functions correctly after update

    After updating this morning (the only package updated being wayland), the display on my main computer (laptop still works fine) no longer works properly. It is a bit difficult to describe the problem: there is a constantly changing display of symbols in various colours, "behind" which the usual terminal messages are still legible, though a bit garbled. This began right after re-boot following the update. Because the problem is apparent immediately when the display starts with the manufacturer's logo, I thought at first my monitor had given up. But the same problem occurs on a replacement monitor, which leads me to think it is a software problem. Any hints -- or even better -- a solution? X won't start, making it pretty useless. I can still ssh into it from my laptop, but a real solution is required. My graphics card is NVidia, if that matters (Intel on my laptop).
    Many thanks!
    Thea
    PS I should add, I have read other posts from today regarding similar display issues, and this one appears to be different, although perhaps related. I retrograded the wayland package, but the problem remains. Wayland was the only package I updated-- that is, the only difference between pre-update (no problems) and post-update (dispaly does not work properly).
    PPS further details:
    1. The problem is already apparent at start-up (push the ON button): the computer (not the monitor) manufacturer name appears, but the display is in dashed lines.
    2. After Arch Linux boot and login, there are 5 vertical bands each about 4cm (1.5 ") wide of "shimmering" pixel colour squares spaced evenly across the screen, the intervening spaces are "normal" -- that is, display correctly and without problem. So to some extent, still workable. X will not start, giving me an error message:(/var/log/Xorg.0.log)
    NVIDIA: Failed to initialize the NVIDIA kernel module
    with the advice to consult kernel.log. However, this log (and all other kernel logs) is empty.
    3. When the monitor goes into standby mode, the "shimmering" bands are still visible.
    Update 1:
    After mesa update this afternoon (21 Feb.) video display returned to normal (ok, mesa depends on wayland) until trying unsuccessfully to start X. Since then (and also after a couple of reboots) the problem is the same. Am hoping the silence on this issue indicates that work is in progress in fixing it.
    Update 2:
    After a night in a cold office (I live in southern Ontario) and a literally cold boot (but no updates), everything appears to be back to normal.
    Still, it would be nice to know what the problem was.
    Update 3:
    So much for magic. This morning (23 Feb.) after normal system update (no obvious problematic packages relating to graphics) the display oroblem returned, as before. Fresh boot made no difference. What's going on??
    Am re-posting this as a new message. Monday, start of the week, who knows, maybe someone can help.
    Last edited by thea (2015-02-23 14:38:28)

    You are probably better discussing web design elsewhere such as on http://forums.mozillazine.org/viewforum.php?f=25
    There have been changes in Firefox as documented for example
    * https://developer.mozilla.org/en-US/docs/Firefox_15_for_developers
    * https://developer.mozilla.org/en-US/docs/Firefox_16_for_developers
    Is the website/application a publicly available one if so are you able to provide a link. Otherwise maybe post an example of code that is affected.
    You may also wish to check the code for validity with for instance http://validator.w3.org/

  • Bookmarking no longer works correctly after updating to the latest version of Firefox. How can this be fixed?

    In the past, when I tried to bookmark a Web page, I had the option of choosing where I wanted the bookmark stored. If I selected "Choose," I would be presented with a list of all my folders. Not any more! Now, if I select "Choose," I am presented with only three options: "Bookmarks Toolbar," "Bookmarks Menu," and "Unsorted Bookmarks."
    Firefox continues to become increasingly difficult to use, and appears to be less stable. I fell that I am being forced to migrate to Google Chrome. What is going on?
    BTW, Firefox prevented support.mozilla.org from asking me to install software on my computer, so I was not able to automatically add troubleshooting information.
    Richard
    <sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

    No. After I select "Choose" the dialog box expands to provide only three choices. This is a new bug. I have only seen it in the past week or so, but it is maddening. I have observed that, while the Mozilla Foundation focuses on trivialities like which search engine should be the default, the Firefox application becomes buggier and buggier. Most of my family has switched to Chrome, and I will be following shortly. Firefox used to be a great program. Not any more. Getting assistance with a problem has also become very difficult.

  • AFter updating to iTunes 11, my first generation Apple TV no longer automatically syncs when I open iTtunes nor does it display its playlists in iTunes.

    AFter updating to iTunes 11 my first generation Apple TV wasn't displayed any longer in iTunes. I had to relink it and after that it no longer automatically sysnc when I open iTunes, nor does it display its play lists. It still has its photos and play lists and it is linked up for streaming but does not sync as it used to do. Is it possible iTunes 11 doesn't support first generation Apple TV the same way it used to.?

    Yes, the first generation model still works with iTunes 11. It sounds as though you have set it up as a streaming only library.
    Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • Artwork displayed incorreclty after update to version 3.1.2

    Afte downloading and installing software update 3.1.2 for iPod Touch album artwork is not displayed correctly while playing songs.
    In the general overview of the albums the album artwork is displayed correctly but when you select and play a song it shows completely different artwork (it uses album artwork from a podcast).
    I had hoped that removing the podcast from library and syncing ipod would solve the issue but then album artwork from another podcast is displayed while playing a song.
    I removed all podcasts but then no artwork at all is displayed.
    Any one else out there with the same problem and how can I solve the issue?

    Tried that, even re-imported all songs again in iTunes and sync with iPod but to no avail.

  • ICloud status not displayed correctly after changing tags

    Hi everybody,
    I have just below 25 000 songs in the iTunes library that I use for iTunes Match (my complete library is actually much larger but I created a separate library to stay below the 25 000 songs limit).
    After changing some tags in iTunes (I had some artists listed twice, once in the format "<last name>, <first name>" and once "<first name> <last name>" and wanted to harmonize this) the iCloud status of most of my songs is no longer displayed correctly. If I create a smart playlist containing all "matched" songs it finds only about 1000 songs, a playlist for "uploaded" songs contains only about 250 songs, the vast majority of my songs simply have NO iCloud status whatsoever (not even "waiting").
    Trying to fix this, I selected all of my songs, option clicked and chose "Add it iCloud". After waiting some time, nothing changed. The funny thing is: iTunes match reports that 24 669 songs (the correct number) are available in iCloud.
    So basically everything works and I am also able to download all of my songs on my iPhone. Still, it's a little bit annoying that the iCloud status is not displayed correctly and smart playlists filtering for iCloud status don't work. Does anybody know a way to fix this?
    Thanks for any help,
    Andreas

    The reason why the C3850 switch stack is showing as standalone in LMS CiscoView is because
    it's returning sysObjectID as standalone.
    It should return as 1.3.6.1.4.1.9.1.1745 --cat38xxstack
    While, if you poll it for sysObjectID, the Catalyst 3850 stack switches will be returning OID 1.3.6.1.4.1.9.1.1641.
    This is an IOS bug "CSCul00003 - Incorrect Sys OID for Cat3850 Stack device".
    Unless this bug is fixed, LMS will not be able to show it as stack device.
    You can try to check if you can manually change the device identity to cat38xxstack from Inventory > add/edit device > edit identity.
    Else we need to wait for the fix of this bug.
    -Thanks
    Vinod

  • After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue?

    After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue? I did the audio troubleshooting and it says everything is fine. I have a Toshiba Satellite L75D-A7280.

    Download/install an app is a know possible solution.
    3. Install another app from the App Store
    If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
    Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    Above from Apple's :
    iOS: Troubleshooting applications purchased from the App Store

  • Problem after updating to iTunes 10.5 on Windows Vista.. I can no longer access the iTunes store..

    Hi
    After updating to iTunes 10.5 on Windows Vista I have found that I can no longer access the iTunes store... I am left with a blank iTunes screen with the loading bar stuck at halfway..
    All other features seem to work... only opening  the iTunes store is failing..
    I have ran the diagnostics feature and this says everything is ok, so I'm a bit stuck
    Please help

    Purple-Gecko...all that I can say is, "Boom!!!"  You are THE man/woman, whichever the case may be.
    The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3).  I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store.  My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5.  Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs.  I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store. 
    Your suggestion is the only "cure" that I have found.
    I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

  • PNG files no longer display correctly...PLEASE HELP!

    Hi there, I just recently upgraded to Final Cut Studio 2. I have a project that I was working on prior to the upgrade and now making some changes in DVD Studio Pro 4.2.0. In my menus I am using a motion menu as the background and a PNG file created in Photoshop with transparent layers set as a Drop Zone so that the menu background can still be seen.
    These PNG files are no longer displaying correctly. It's really hard to explain except to say that anything that was transparent is now displaying a solid white. I have trashed the prefs and restarted with no improvement.
    Does anyone have any ideas? I was just going to make a small change for the client and now the whole project is not right.
    Many thanks, Simon.

    Hi:
    In DVDSP preferences, under Menu encoding settings change it from hardware based to software based or vice versa depending on what do you have now selected. Build again and check if it's solved.
    Hope that helps !
      Alberto

  • HT1364 after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

    after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

    You might want to post this over in the iTunes Match forum.

  • Keyboard not working correctly after updating to 8.1 64bit pro.

    Keyboard not working correctly after updating to 8.1 64bit pro.
    After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
    http://answers.microsoft.com/en-us/windows/forum/w​indows8_1-hardware/windows-81-keyboard-problem-cou​...
    I think it can be solved with a driver update from hp or the keyboard builder but none is online.

    Hi,
    Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
    http://www8.hp.com/us/en/ad/windows-8/upgrade.html
    Let me know if you need more help.
    I am an HP employee.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on “Kudos” STAR to say thanks!***

  • TS1538 After updating my iTunes it no longer acknowledges that my iPod or iPhone is connected so I can't update my music.. I have followed all of these steps and everything is working fine but this new version of iTunes isn't recognizing my devices. Any a

    After updating my iTunes it no longer acknowledges that my iPod or iPhone is connected so I can't update my music.. I have followed all of these steps and everything is working fine but this new version of iTunes isn't recognizing my devices. Any advice?

    I have the same problem. Running Win 8 64Bit, updated to latest ITunes and now will not recognize phone or pad. Followed all advice from Apple (uninstall/restart/re-install, all in exact order) ... nothing. Spoke with Apple tech and walked through the whole process, but no resolution. Tech was trying to be helpful but has no way of addressing issue.

  • I can no longer buy, download, or update apps/iTunes without being asked for apple ID and billing information to be declined

    I can no longer buy, download, or update apps/iTunes without being asked for apple ID and billing information. Even if apps are free or updating I'm asked for billing information. It's been like this for a couple of weeks after the purchase of a movie off iTunes and the purchase was successful but afterwards my App Store and iTunes stopped working properly. Help me please, thanks.

    Go here:
    https://expresslane.apple.com/Issues.action
    Ask for assistance.

  • After updating my itunes per the update notice I received a run-time error R6034 message. Now I am unable to use iTunes. What can I do to repair this error?

    After updating my iTunes per the update notice I received a run-time error R6034. Now I am unable to access iTunes at all.
    Can someone tell me how to correct this problem?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Problems detected after updating to iTunes version 11.1.3.8

    Problems detected after updating to iTunes version 11.1.3.8 for Windows 7 Ultimate 64-bit version, Service Pack 1.
    USB connected iPhone 4 (iOS 7.0.4) is not recognised in iTunes.
    Sluggish response when starting iTunes.
    Any known remedy?

    After updating to the newest version of iTunes which is 11.1.3.8, I can no longer edit song information because whenever I click Get Info, the program crashes. It says, "iTunes has stopped working...". I literally tried all the troubleshooting techniques here but to no avail!
    I already:
    Reinstalled iTunes and other related programs like a hundred times
    Scanned my computer for viruses
    Opened iTunes on another user account
    Opened iTunes on safe mode
    Removed unusable configuration files
    BUT STILL, the problem persists. I have the same version of iTunes on my office computer and it works perfectly fine but I want my iTunes here at home to get fixed. Never had problems with editing song information until I updated it to 11.1.3.8.
    I just don't know what to do anymore. I updated this program last January 1 and until now I haven't found any solution. It's really getting on my nerves!!!

Maybe you are looking for

  • Accidently deleted Safari and now can't reinstall

    My brother was messing with my macbookpro while i was outside and he some how deleted my Safari. Now when i try to reinstall it it says it can't because there is an updated version already. Anyway to fix this? My mac is a version 10.7.4. Please help

  • Clear Package Not Working - Data File is Empty

    Hi I am trying to run a clear package against a precise section of data. However the package keeps erroring and the log file shows me the below: TOTAL STEPS  3 1. Export_Zero:        completed  in 1 sec. 2. Load Cube:          Failed  in 1 sec. 3. Cl

  • Excess Qty confirmation than Production order qty

    Hi SAP Experts Is it possible to confirm excess qty of yield in co11n against Production order qty. pl. guide me the steps required. with Best Regards Yogesh

  • Adding a Web Dynpro Model on a Composite Apllication Component in CE 7.1

    Hi experts, I am trying to add a web dynpro model to a Composite Application DC. I am using SAP NW CE 7.1. In CE 7.0, this was done by simple right click on the CA DC. but i am not able to do it in CE 7.1. Can somebody tell me how do i add a web dynp

  • ThinkVanta​ge Toolbox works but crashes when clicking on "settings"

    Hi. I have just changed my HDD, from a SG Momentus 500GB to the same but 750 GB. Computer's a ThinkPad T410, OS is W7 Ultimate 64bit. With the previous disk I never experienced any issues with ToolBox, while with this one everything works, but when I