My AS-SSD results seem low for X120e and Samsung 470 256gb SSD

Someone wanted to know my results in AS-SSD for a Samsung 470 256GB in a X120e. I did check in BIOS and disk is set to ACHI. Results seem a bit slow:
Samsung 470 Series
AXM0
Amd_Sata
1228800 K - OK
238.47GB
SEQ: Read 128.53 MB/s Write: 123.49 MB/s
4K: Read 9.52 MB/s Write: 16.64 MB/s
4K-64thrd: Read 64.30 MB/s Write 51.27 MB/s
Acc.Time: Read 0.246 ms Write 0.203 ms
Score: Read 88 Write: 80
Total: 216
I used the Lenovo Recovery Disk to do my install which I read was SSD aware, but here are my partitions with offsets:
Partition #0 Disk #0
Size: 992.5 KB (1,016,320 bytes)
Partition Offset: 32,256 bytes
Partition #1, Disk #0
Size: 1.17 GB (1,257,242,624 bytes)
Partition Offset: 1,048,576 bytes
Partition #2, Disk #0
Size: 237.30 GB (254,799,773,696 bytes)
Partition Offset: 1,258,291,200 bytes
Partition #3, Disk #0
Size: 1.34 MB (1,400,832 bytes)
Partition Offset: 256,058,064,896 bytes
I'm I aligned correctly? Everything excpt Partition #0 seems right. So, I'm kinda wondering what's wrong.

Heh I just clued in that the utility is AS-SSD. I ran it, but I dont know if I believe it. Read seems fine but write is way slow.
AS SSD Benchmark 1.6.4067.34354
Name: OCZ-VERT EX2 SATA Disk Device
Firmware: 1.33
Controller: amd_sata
Offset: 1229824 K - OK
Size: 223.57 GB
Date: 09/06/2011 10:22:34 PM
Sequential:
Read: 239.02 MB/s
Write: 50.19 MB/s
4K:
Read: 9.84 MB/s
Write: 20.88 MB/s
4K-64Threads:
Read: 90.05 MB/s
Write: 53.47 MB/s
Access Times:
Read: 0.319 ms
Write: 0.460 ms
Score:
Read: 124
Write: 79
Total: 261
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |

Similar Messages

From where to download Emulators for LG and Samsung CDMA Phones ?

Hi,
I have developed one J2me midelt app for Nokia S40 phones which runs fine on S60 ed also but i want to test it for LG and Samsung java enabled phones.
I could not found the SDK and Emulators for LG and Samsung phones.
where to download Emulators for LG and Samsung CDMA Phones ?
please help.

You wrote:
There no longer are standalone upgraders for Safari.
I beg to differ, amigo...
...but you're correct in saying that they're not generally available. You have to know where to find them. Evidently, you don't...and obviously I didn't either, or I wouldn't have asked. But I think I know how to find out where they are now.
Thanks again for your prompt replies.

Exporting HD Sizes for Quicktime and AVI?

Okay, LOVE the new CS4, but have a problem.
For tech notes in case it means anything, I'm shooting with a JVC HD-110, editing M2T files. Everything in THAT respect works perfectly - NOW I even have an FS5 drive so it goes even better - dropping all capture time and processes. The Projects are all set up as HDV, 720p at 24p - basically, everything about the Project is set to HD.
When I choose Quicktime or AVI as the Export format, the only Preset options that come up are DV related. Meaning, SD... And when I have to manually type 1280x720 as the export size (upping the default from 720x480) it even reads "1,280" - not a straight "1280", get it?
The resulting render looks horrible - completely unusable - unless my goal is to simulate the old Fisher Pricer Pixel Camcorder ;-)
How do I Export from Premiere's Timeline to an HD format? Or can I download a set or HD Presets to put in the Export Settings (or something) folder for each codec?
Thank you for your time, and any thoughts-
-Lew

Oh yeah - there's a whole huge list for WMV! MAN you have options there!
No, none of those options are (or seem) available for Quicktime and AVI.
I bounce files back and forth for clients (and myself) for FX work and edits (they prefer the Quicktime Animation codec at 100% - gotta admit, it's beautiful!), and would like to do final output to HD in the end for a project I'm working on right now.
-Lew

My battery runs low very fast (three hours). I looked in the usage settings and it seems the time for usage and stand-by are the same, allthough i did have my iphone on stand-by!! What can i do?

Community,
I have a problem with my iphone 4. Every few months my battery starts draining within a few hours. I have tried all kinds of battery saving tips, but they don't help. When i go to the settings/general/usage is can see that the time for Usage and Stand-by are the same, so my phone is fully on all the time this explains the draining. But in reallity i turn my phone to stand-by most of the time, i mean the screen is black and all???
The first and second time a had this problem, both a few months a part, i restored my phone and it was solved. This time i restored my phone but this did not help!! And restoring my phone every two months is not my preferd way of solving this problem.
Does anybody have an idea on how to solve this problem? can anybody help me?
best regards,
Merijn

Restoring is the answer. It sounds as if there is a rogue process constantly draining your battery.
The issue you face is that, if you restore your backup thereafter, you risk the problem coming straight back with your files.
Store your files individually and it is time to start fresh.

Benchmark Results BEA/JBOSS for Asynchronous Apps

Hi people,
here are results for the messaging benchmarks, for BEA and JBoss.
First, a little description of the scenario.
We decided for this simple scenario to benchmark :
PostingClient posts to Topic1.
MDB1 (a message driven EJB) is listening on topic1, gets the message, puts
its time of receipt in the message, and sends it to topic2.
MDB2 (a message driven EJB) is listening on topic2, gets the message, puts
its time of receipt in the message, and sends it to topic3.
MDB3 (a message driven EJB) is listening on topic2, gets the message, puts
its time of receipt in the message, and sends it to topic4.
MDB4 (a message driven EJB) is listening on topic2, gets the message, puts
its time of receipt in the message, and sends it to topic1.
and when the message is posted to topic1, MDB1 regets the message.
There is another listener on topic1 --> MonitoringClient.
MonitoringClient gets the messages arriving there, and reports the times the
message took between the 4 MDBs.
Summary : the messages sent into the EJB Server remain in there, and make
loops from MDB1 to MDB4 and back again, endlessly.
Hardware : Pentium II, 400 Mhz, 256 Megs of RAM.
OS : Windows NT4
VM : Sun 1.3
Benchmark Testing Series :
Weblogic Benchmarks:
VM : 64MB heapsize.
Configurations :
1) max-beans-in-free-pool : 50 initial-beans-in-free-pool : 6 (in the
entries in weblogic-ejb-jar.xml, for each of the 4 message beans)
2) max-beans-in-free-pool : 500 initial-beans-in-free-pool : 62
3) max-beans-in-free-pool : 2000 initial-beans-in-free-pool : 250
for each configuration we tested (with 1 KB messagesize):
50 msgs, 500 msgs, 5000msgs, and infinite (until server crash - maximum time
waiting for crash 30 minutess)
On JBoss :
VM: 64MB heapsize.
Configurations:
(in jboss.xml)
1) container-invoker : maximumsize 50,maxmessages 1 - container-pool:
maximumsize 50 minimumsize 6
2) container-invoker : maximumsize 500,maxmessages 1 - container-pool:
maximumsize 500 minimumsize 62
3) the maximum jboss could handle even with 128mb ram for the heapsize of
the VM was :
container-invoker : maximumsize 500,maxmessages 1 - container-pool:
maximumsize 500 minimumsize 100
for each configuration we tested (with 1 KB messagesize):
50 msgs, 500 msgs, 5000msgs, and infinite (until server crash - maximum time
waiting for crash 30 minutes)
Results for Weblogic :
this server is very fast and stable. With 5000 Messages, we had a crash at
configuration 1, at 1800 Messages sent.
With configuration 2, it crashed at 3300, and with configuration 3 we had a
crash as early as with 500 messages - but that was due to the low heapsize
of the VM.
When we raised the heapsize to 128Megs, the server ran good with 10000
messages.
Sending times : we mesaured the times needed for a message to be sent
between to consecutive MDBs - for weblogic it was all around 0,1 secs.
At 10000 messages, average sending time was 1,4 seconds.
For 5000 messages, even with config 3, we had 0,8 seconds.
All other results were very acceptable, average times of 0.01 to 0.2.
If you need any more details, contact me.
JBoss :
config 3,2 : 3 seconds average with 50 messages.
Well, to be very honest : perhaps I m doing something fundamentally wrong,
and I dont know exactly what strategy JBoss is pursuing in its kind of
message delivery, but JBoss crashed at every config with 500 messages.
Average sending times at 50 messages were 3 seconds, regardless of the
configuration used, the parameters showed little or no effect.
I know that these parameters should tune throughput, I know, and I know that
with 4 topics and 4 MDBs, we are not simulating a true asynchrnously
designed application, meaning : with asynchronous components only.
But regardless of the throughput, no one wants to wait 12 seconds for a
response.
Even with 30 messages in the system, the average was 2 seconds, meaning 8
seconds in total to wait for a response : and this with only 4 asynchronous
components.
At 10 messages, we got average times of 0,7 seconds - meaning a response
time of 3 seconds in total, which could be acceptable.
It is also strange that weblogic showed significant CPU usage when
increasing the JMS load, while JBoss stayed very happy with around 10%, not
caring about any optimization in speed, it seems.
Have we forgotten any parameters to SPEED up sending times, message
delivery, or MDB invocation for JBoss ?
I am really wondering.
For precise details, contact me.
Best regards, Jubin Zawar

Hi Jubin,
Great Job done by you. Can have the results in Detail. It would be very help
full for me, I am working on something to load test my app though not ready
right now it will be soon ready.
Regards
LJS Narayana
"Jubin Zawar" <[email protected]> wrote in message
news:[email protected]...
Hi people,
here are results for the messaging benchmarks, for BEA and JBoss.
First, a little description of the scenario.
We decided for this simple scenario to benchmark :
PostingClient posts to Topic1.
MDB1 (a message driven EJB) is listening on topic1, gets the message, puts
its time of receipt in the message, and sends it to topic2.
MDB2 (a message driven EJB) is listening on topic2, gets the message, puts
its time of receipt in the message, and sends it to topic3.
MDB3 (a message driven EJB) is listening on topic2, gets the message, puts
its time of receipt in the message, and sends it to topic4.
MDB4 (a message driven EJB) is listening on topic2, gets the message, puts
its time of receipt in the message, and sends it to topic1.
and when the message is posted to topic1, MDB1 regets the message.
There is another listener on topic1 --> MonitoringClient.
MonitoringClient gets the messages arriving there, and reports the timesthe
message took between the 4 MDBs.
Summary : the messages sent into the EJB Server remain in there, and make
loops from MDB1 to MDB4 and back again, endlessly.
Hardware : Pentium II, 400 Mhz, 256 Megs of RAM.
OS : Windows NT4
VM : Sun 1.3
Benchmark Testing Series :
Weblogic Benchmarks:
VM : 64MB heapsize.
Configurations :
1) max-beans-in-free-pool : 50 initial-beans-in-free-pool : 6 (inthe
entries in weblogic-ejb-jar.xml, for each of the 4 message beans)
2) max-beans-in-free-pool : 500 initial-beans-in-free-pool : 62
3) max-beans-in-free-pool : 2000 initial-beans-in-free-pool : 250
for each configuration we tested (with 1 KB messagesize):
50 msgs, 500 msgs, 5000msgs, and infinite (until server crash - maximumtime
waiting for crash 30 minutess)
On JBoss :
VM: 64MB heapsize.
Configurations:
(in jboss.xml)
1) container-invoker : maximumsize 50,maxmessages 1 - container-pool:
maximumsize 50 minimumsize 6
2) container-invoker : maximumsize 500,maxmessages 1 - container-pool:
maximumsize 500 minimumsize 62
3) the maximum jboss could handle even with 128mb ram for the heapsize of
the VM was :
container-invoker : maximumsize 500,maxmessages 1 - container-pool:
maximumsize 500 minimumsize 100
for each configuration we tested (with 1 KB messagesize):
50 msgs, 500 msgs, 5000msgs, and infinite (until server crash - maximumtime
waiting for crash 30 minutes)
Results for Weblogic :
this server is very fast and stable. With 5000 Messages, we had a crash at
configuration 1, at 1800 Messages sent.
With configuration 2, it crashed at 3300, and with configuration 3 we hada
crash as early as with 500 messages - but that was due to the low heapsize
of the VM.
When we raised the heapsize to 128Megs, the server ran good with 10000
messages.
Sending times : we mesaured the times needed for a message to be sent
between to consecutive MDBs - for weblogic it was all around 0,1 secs.
At 10000 messages, average sending time was 1,4 seconds.
For 5000 messages, even with config 3, we had 0,8 seconds.
All other results were very acceptable, average times of 0.01 to 0.2.
If you need any more details, contact me.
JBoss :
config 3,2 : 3 seconds average with 50 messages.
Well, to be very honest : perhaps I m doing something fundamentally wrong,
and I dont know exactly what strategy JBoss is pursuing in its kind of
message delivery, but JBoss crashed at every config with 500 messages.
Average sending times at 50 messages were 3 seconds, regardless of the
configuration used, the parameters showed little or no effect.
I know that these parameters should tune throughput, I know, and I knowthat
with 4 topics and 4 MDBs, we are not simulating a true asynchrnously
designed application, meaning : with asynchronous components only.
But regardless of the throughput, no one wants to wait 12 seconds for a
response.
Even with 30 messages in the system, the average was 2 seconds, meaning 8
seconds in total to wait for a response : and this with only 4asynchronous
components.
At 10 messages, we got average times of 0,7 seconds - meaning a response
time of 3 seconds in total, which could be acceptable.
It is also strange that weblogic showed significant CPU usage when
increasing the JMS load, while JBoss stayed very happy with around 10%,not
caring about any optimization in speed, it seems.
Have we forgotten any parameters to SPEED up sending times, message
delivery, or MDB invocation for JBoss ?
I am really wondering.
For precise details, contact me.
Best regards, Jubin Zawar

I have windows 7 and when i start up i tunes i get a message..."The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i

when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chris

Refer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)

I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)
This is a section:
May 12 02:05:10 wendy-drapers-macbook configd[14]: setting hostname to "wendy-drapers-macbook.local"
May 12 02:05:29 wendy-drapers-macbook kernel[0]: Auth result for: 00:26:44:14:17:a3 MAC AUTH succeeded
May 12 02:05:29 wendy-drapers-macbook kernel[0]: AirPort: Link Up on en1
May 12 02:05:29 wendy-drapers-macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (192.168.1.92); network traffic reduction measures in effect
May 12 02:05:29 macbook configd[14]: setting hostname to "macbook.lan"
May 12 02:05:31 macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021E:C2FF:FEB3:1A3E); network traffic reduction measures in effect
May 12 02:05:34 macbook com.apple.launchd[1] (org.samba.nmbd): Throttling respawn: Will start in 5 seconds

I've been seeing messages exactly like that (and many, many other kinds) in the Console since the first version of OS X. They look menacing but are harmless.
You don't need any kind of security software.
Just surf the web carefully, pay attention to where you're going and don't install anything that you don't recognize. If you are asked to enter an admin user name and password, DON'T. Unless you know for sure that you initiated the installation from a known and reliable source (like Apple).
Mac malware relies on social engineering. No amount of security/anti-virus, blah, blah, blah software is going to help.

I received the following message when iTunes launches: "The registry settings used by the iTunes drivers for importing and burning CD's or DVD's are missing. This can happen as a result of installing other CD burning softwarre. Please reinstall iTunes"

Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters

Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I'm disappointed with the performance. Any

Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I love the features, but I'm disappointed with the performance. Any help coming from Apple? I've been sending them so many reports after crashes, that their file must be full!

Summoning max. courage, I did what you advised. Here is the result. What does this tell you? My Lion 7.2 (mid 2011 iMac) has several annoying glitches (which I have so far tolerated through gritted teeth) but none that have actually stopped me working.
BTW, I see several items involving CleanMyMac which I did not know I had. It is generally villified as a trouble-maker. Spotlight can't find an app. or a utility of that name. How can I get rid of what's there please? Just delete?
Last login: Thu Nov 3 20:55:11 on console
Steve-Kirkbys-iMac:~ stevekirkby$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
com.AmbrosiaSW.AudioSupport(4.0)
Steve-Kirkbys-iMac:~ stevekirkby$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
Password:
com.openssh.sshd
com.stclairsoft.DefaultFolderXAgent
com.microsoft.office.licensing.helper
com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8
com.bombich.ccc
com.adobe.SwitchBoard
Steve-Kirkbys-iMac:~ stevekirkby$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
com.sony.PMBPortable.AutoRun
uk.co.markallan.clamxav.freshclam
com.veoh.webplayer.startup
com.macpaw.CleanMyMac.volumeWatcher
com.macpaw.CleanMyMac.trashSizeWatcher
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
Steve-Kirkbys-iMac:~ stevekirkby$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
ApplicationEnhancer.framework
AudioMixEngine.framework
FxPlug.framework
NyxAudioAnalysis.framework
PluginManager.framework
ProFX.framework
ProMetadataSupport.framework
TSLicense.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
EPPEX Plugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.sony.PMBPortable.AutoRun.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8.plist
com.microsoft.office.licensing.helper.plist
com.stclairsoft.DefaultFolderXAgent.plist
/Library/PreferencePanes:
.DS_Store
Application Enhancer.prefPane
Default Folder X.prefPane
DejaVu.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
/Library/PrivilegedHelperTools:
com.bombich.ccc
com.microsoft.office.licensing.helper
com.stclairsoft.DefaultFolderXAgent
/Library/QuickLook:
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
DesktopVideoOut.component
DivX 6 Decoder.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
LiveType.component
/Library/ScriptingAdditions:
.DS_Store
Adobe Unit Types.osax
Default Folder X Addition.osax
/Library/StartupItems:
Library/Address Book Plug-Ins:
Library/Frameworks:
EWSMac.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.macpaw.CleanMyMac.trashSizeWatcher.plist
com.macpaw.CleanMyMac.volumeWatcher.plist
com.veoh.webplayer.startup.plist
uk.co.markallan.clamxav.freshclam.plist
Library/PreferencePanes:
.DS_Store
Perian.prefPane
WindowShade X.prefPane
Library/QuickTime:
AC3MovieImport.component
Perian.component
Library/ScriptingAdditions:
Steve-Kirkbys-iMac:~ stevekirkby$

Query Builder results seem to max out at 500 lines. How to change?

Hi all,
Some of out Application Express users are using the Query Builder tool for ad-hoc reporting. The idea is to run the SQL to extract the data, then download to MS Excel. The Query Builder results seem to max out at 500 lines. I want to increase that value. I searched all Application Express forums for 'query builder output max 500' and then 'query builder output' and did not find the answer.
How do I change the 500 line limit in Query Builder results?
Thanks!
Application Express 3.1.2.00.02
Oracle 10g
Standard PDF printing (not BI Publisher)

Bryan,
Here is a link to an HTML-DB studio application, that is a QBE "replacement" for the query tool in APEX development..
http://htmldb.oracle.com/pls/otn/f?p=18326:7:1387557504245687::::P7_ID:1222
It is for an older version of APEX, but you should be able to make it work for your needs..
Thank you,
Tony Miller
Webster, TX

Assigning JMS message in BPEL: The result is empty for the XPath expression

Hi,
My project, an Oracle BPEL 11g project, is reading an XML payload from a JMS queue. I would like to transform the message and assign the elements of the messages to other variables. But when I am doing that in the "assign" step, it raises an error: Error in evaluate <from> expression at line "63". The result is empty for the XPath expression : "/ns2:publishProject/payload/Message".
Even though I can see the message payload in the Audit with all the values.
To me it looks like a name space issue, but I could not find out how to correct it. Any hint will be a big help. Please let me know if you want to check the .xsd for the message.

I publish a JMS message to a topic in one BPEL process and have another BPEL process read from the topic and start the flow. The problem I have is that the first process is writing fine to the topic, but the second process seems to be reading twice. I am seeing two instances of the second process in em.
Can anyone help? I am using JDev 11.1.1.1.0
Thanks

How to display and print CCR showing not only results, high, low or normal, but also normal ranges of tests.

How do I display and print CCR showing not only my actual results, high, low or normal results, but also normal ranges of each test? I can do this individually but not for the composite CCR.
Thanks.

Hi,
I'm not exactly clear on what you are doing. I can tell you that the ranges and flags for high, low, and normal come from the lab results provider in the lab results they sent you, not from HealthVault. If you go back to the original document that came from
the laboratory, you should be able to open it as a document and print it.
I hope this helps. If not, please respond with more details, or if you'd prefer a private conversation, please contact HealthVault customer support by opening a support ticket with them.
Thanks,
Kathy

Blackberry 9320 broken,9360 on the same route due to "battery to low for radio use" etc

My previous blackberry 9320 ,which I can't use anymore, aswell as my 9360 that's on the same route as the previous one started out in the beginning with
-battery to low for radio use(which I would turn back on)
Later my memory card couldn't be recognized, after some attempts of "fixing the broken files" as the phone would say, and then "repairing failed"
Problems got worse ,as if I allready can't use a memory card because all 3 got broken somehow,but after that it started saying "battery to low for radio use" then my battery would in a matter of seconds drain and then a message I get atleast 30 times a day "battery drained,shuttingdown handheld". It gets worse, then it says the same message ,but only this time the battery is full, because the phone must be pluged in too a charger to be able to start, and as I call it, then has to be on "life-support"(charging like 24/7). These problems seem to be activated by high radio use or just plainly to irretate a person. I'm very dissatisfied with blackberry and I seek answers. now here comes the catch, I took my previouse blackberry,the 9320, in 2 times to get the software updated and the last time they couldn't say why this is happening , aswell as try putting another(new) blackberry 9320 battery in the phone. It worked for 3 days,no kidding, and the same problems in their stages began.I fear my blackberry 9360 is on the same route and I'm dissatisfied with these products for its expensive and causing trouble. Please help me resolve this problem ???p.s both phones were newly bought since they are contract phones.

Hi and Welcome to the Community!
Given that you've already begun formal service for this issue, I recommend you continue with that. After all, they said it was fixed, but it's not...don't you want to challenge them on that fact?
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery. But I got more time out of running with my iPhone. Does this sound normal? I thought I sh

Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery. But I got more time out of running with my iPhone. Does this sound normal? I thought I should get close to 30 hrs of just play time alone.
ALso, my wife got me the Belkin armband to run with the nano but I sweat through the band resulting in the back of the iPod to get wet. Surely this is not good. Anyone have a recommendation for an armband that keeps moisture away from the pod?

iPod Nano are small and they don't use Wi-Fi access so you get less power time on a Nano. As for iPhone, since you got apps, Wi-Fi + 3G access, and everything else, they give you more time so you can keep using. Nanos are ment to listen to music, listen to radio, view your photos, watch videos (without Wi-Fi) and since you got BlueTooth on the nano, it counts as wireless access so it drains your battery faster.

"Battery too low for radio use" - Curve 9320

Since early on my curve 9320 has given me a "battery too low for radio use" warning at very random moments often times when the battery is still halfway into the white area. Sometimes this can be reset manually in the setting by turning radio back on, however this does cut into calls, messages and other activities.
I have changed the battery recently thinking this was the cause of the issue, however this did not help. I am still getting the error...not to mention the short battery life of this device...this is very frustrating.
Is this a common problem and if so how is it solved? Any help is appreciated!
BV

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My AS-SSD results seem low for X120e and Samsung 470 256gb SSD

Similar Messages

Maybe you are looking for