My ASA5540 8.2.4(4) can not monitor and failover on certain interfaces

the story is
we configure the
monitor interface inside
monitor interface outside
monitor interface partner
and save configue
but when i show run monitor-interface
the configure do not show the 3 montitor interfaces, it only show other monitor interfaces,which can failover , but not the above 3 interfaces, however they are all showed interface monitor in the ASDM configure
here is the show version
==================================
Cisco Adaptive Security Appliance Software Version 8.2(4)4
Device Manager Version 6.4(5)
Compiled on Thu 03-Mar-11 17:18 by builders
System image file is "disk0:/asa824-4-k8.bin"
Config file at boot was "startup-config"
dcm-lidc-fw1 up 9 days 18 hours
failover cluster up 16 days 20 hours
Hardware:   ASA5540, 2048 MB RAM, CPU Pentium 4 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is 30e4.db7b.6f82, irq 9
1: Ext: GigabitEthernet0/1 : address is 30e4.db7b.6f83, irq 9
2: Ext: GigabitEthernet0/2 : address is 30e4.db7b.6f84, irq 9
3: Ext: GigabitEthernet0/3 : address is 30e4.db7b.6f85, irq 9
4: Ext: Management0/0       : address is 30e4.db7b.6f86, irq 11
5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
6: Int: Not used            : irq 5
7: Ext: GigabitEthernet1/0 : address is 30e4.db02.1f96, irq 255
8: Ext: GigabitEthernet1/1 : address is 30e4.db02.1f97, irq 255
9: Ext: GigabitEthernet1/2 : address is 30e4.db02.1f98, irq 255
10: Ext: GigabitEthernet1/3 : address is 30e4.db02.1f99, irq 255
11: Int: Internal-Data1/0    : address is 0000.0003.0002, irq 255
Licensed features for this platform:
Maximum Physical Interfaces    : Unlimited
Maximum VLANs                  : 200
Inside Hosts                   : Unlimited
Failover                       : Active/Active
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
Security Contexts              : 2
GTP/GPRS                       : Disabled
SSL VPN Peers                  : 2
Total VPN Peers                : 5000
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Enabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
Total UC Proxy Sessions        : 2
Botnet Traffic Filter          : Disabled
This platform has an ASA 5540 VPN Premium license.
==========here is the show monitor interface, it does not show outside/inside/partner====================
-fw1# sh run monitor-interface
monitor-interface app
monitor-interface dmz
monitor-interface data
monitor-interface dev-app
monitor-interface dev-data
no monitor-interface management
-fw1#
-fw1(config)# sh run all | in monitor
banner motd * This is a private and monitored system.      *
monitor-interface app
monitor-interface dmz
monitor-interface data
monitor-interface dev-app
monitor-interface dev-data
no monitor-interface management
===============failover test =============
- unplug the outside interface cable on primary , led go off, but failover does not happen-
- upplug the cable on inside, or parner , it still do not failover
- only unplug the cable on other monitor interface , it failover.
=======clear config monitor-interface, and enter monitor-interface command for all the interface, re test, again, same result=======

fw1# sh failover
Failover On
Failover unit Secondary
Failover LAN Interface: failover GigabitEthernet1/3 (up)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 8 of 210 maximum
Version: Ours 8.2(4)4, Mate 8.2(4)4
Last Failover at: 15:44:00 EST Nov 24 2011
        This host: Secondary - Standby Ready
                Active time: 767625 (sec)
                slot 0: ASA5540 hw/sw rev (2.0/8.2(4)4) status (Up Sys)
                  Interface outside (209.202.65.132): Normal
                  Interface inside (10.100.161.2): Normal
                  Interface app (10.100.171.2): Normal
                  Interface dmz (10.100.172.2): Normal
                  Interface data (10.100.173.2): Normal
                  Interface dev-app (10.100.174.2): Normal
                  Interface dev-data (10.100.175.2): Normal
                  Interface management (10.7.4.9): Failed (Not-Monitored)
                  Interface partner (10.100.160.14): Normal
                slot 1: ASA-SSM-4GE hw/sw rev (1.0/1.0(0)10) status (Up)
        Other host: Primary - Active
                Active time: 77823 (sec)
                slot 0: ASA5540 hw/sw rev (2.0/8.2(4)4) status (Up Sys)
                  Interface outside (209.202.65.131): Normal
                  Interface inside (10.100.161.1): Normal
                  Interface app (10.100.171.1): Normal
                  Interface dmz (10.100.172.1): Normal
                  Interface data (10.100.173.1): Normal
                  Interface dev-app (10.100.174.1): Normal
                  Interface dev-data (10.100.175.1): Normal
                  Interface management (10.7.4.8): Normal (Not-Monitored)
                  Interface partner (10.100.160.13): Normal
                slot 1: ASA-SSM-4GE hw/sw rev (1.0/1.0(0)10) status (Up)
Stateful Failover Logical Update Statistics
        Link : failover GigabitEthernet1/3 (up)
        Stateful Obj    xmit       xerr       rcv        rerr
        General         1001073    0          443701     25
        sys cmd         194284     0          194283     0
        up time         0          0          0          0
        RPC services    0          0          0          0
        TCP conn        262196     0          45389      2
        UDP conn        342196     0          47480      3
        ARP tbl         202397     0          156529     20
        Xlate_Timeout   0          0          0          0
        IPv6 ND tbl     0          0          0          0
        VPN IKE upd     0          0          10         0

Similar Messages

Can not see the device net Master Interface in my project.

Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?

Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
Are you able to hold the C key down when you reboot, to boot off the installation disk?

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

settings - app/iTunes store - sign out and sign back in with your new id.
Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
You can't merge apple id.

After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for hel

After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for help from you I will make the iphone does not open e-mail address associated with it @hotmail.com mail to this address icloud iphone phone's password is forgotten, I want to thank you in advance for your help tell a method of opening up again.
<Email Edited by Host>

Welcome to the Apple Community.
I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
Apple Topluluk hoş geldiniz.
Ben düzenlenebilir için e-posta adresi için istedi. Açık bir konu adres gönderme istenmeyen e-posta ile bombardıman bir emin yoludur, bulmak için otomatik algılama yazılımı için, size sorunu giderilmiştir sonra burada uzun olacak unutmayın.
Eğer insanlar sizinle iletişim istiyorsanız, başkalarının profilinizde e-posta adresinizi görmelerini sağlar.
Bu özellik onları çalıntı olduğunu bu işe yaramaz çalıntı telefonları için getirilmiştir.
Ancak aynı zamanda kullanıcı Apple ile Apple ID ayrıntıları değişti ve iCloud hesabı için aynı değişiklik yapmamış ortaya çıkar / iOS 7 yükseltmeden önce cihaz üzerinde My Phone bul olabilir.
Tek çözüm My Apple ID de Apple ile önceki durumuna geri Apple ID değiştirmek için, değişiklikleri doğrulamak cihazınızda talep olarak, şifreyi girin ve sonra kapatın "benim telefon bulmak".
Daha sonra tekrar bugünkü durumuna Apple ID değiştirmek gerekir, bir kez daha doğrulamak cihazınızdan iCloud hesabı silmek ve daha sonra mevcut Apple kimliği kullanarak oturum açın. Son olarak, geri bir kez daha üzerinde "benim telefon bulmak" açın.

HT5934 i have a iphone 5 but i can not Download and install IOS 7 ?

i have a iphone 5 but i can not Download and install IOS 7 ?
Why ?
ThX!

what happens when you try?? Error messages?

I have followed the directions given and still can not copy and paste, how can I fix this?

I am trying to use the copy and paste function on a website and I get a message window that states that firefox does not allow cut/copy/paste. I followed the link for help and created the js. text file like instructed with the website's URL. I still can not copy and paste. I can copy and paste on this website with internet explorer, but not with firefox. I can not perform all the website functions with the internet explorer brower and switching back and forth from browser to browser is very time consuming and a hassle. Please help me solve this issue.

Try this using extension - Allow Clipboard Helper - it makes that a lot easier to do and lessens the incidence of user error. <br />
https://addons.mozilla.org/en-US/firefox/addon/852

Can not drag and drop or copy and paste

It is as simmple as the title. I can not drag and drop icons or text or folders. Nothing. As for cut, copy, and paste they do not work either. I am trying to back up my files so I can do a clean install of snow leopard. I have leopard currently.

So Copy/Paste, etc. isn't working in say Text Edit?
On the Drag & Drop, where are you trying to drop them, & does the icon move but just not copy?

HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

I can not monitor Xmod to monitor ( the firmware update doesn't work on my ca

I have a problem I can not monitor Xmod to monitor the sound when I use line-in to record,even if I have already update my firm ware.actually the main reason I bought this sound card is my laptop very noisy when recording ,so I hope I can get a usb sound card to work with my laptop especially in my recording studio.
in the description of the firmware,it said the update of the firmware can enable me to monitor when recording.
hope Creative staff or anybody who knows about it can help me out

Did you miss this bit
"Graphics : 1 GB NVIDIA Quadro 600 (1DP & 1DVI-I) (1DP-DVI & 1DVI-VGA adapter) (ELGA13) 1"
And the final image clearly states the type of Graphics Card he has
Photoshop CS6 GPU FAQ
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)

I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

All content from iTunes is tied to the account that downloaded it, so the id that shows when trying to download updates should be the account that 'owns' that app. Do you recognise the id that is showing e.g. has anybody else downloaded or synced content to your iPad ?

I can not download and play HD rented movies through my TV2

My Problem:
I can not download and play HD rented movies through my TV2
and get the following message "an error occurred loading this content. Try again later"
Do others have the same problem of not being able to play rented HD?
All my other activities are normal. I can play Standard Def rentals, Movie Previews, HD MLB, and all else as necessary except HD rentals
I have a 13.5 Mbps connection.
I have gone through ALL of the expected procedures. Changed the cable, did a reset, did a restore.
This has happened with two TV2's as I replaced the first one due to the "unable to update issues"
The current TV2 now has the current up to date software since that issue has been resolved for all.
Any answers???
Location Melbourne Australia.

This is a new TV2. Actually my second. First bought less than 2 weeks ago. it was returned to the store and replaced because of the issue of not being able to update the TV2 software from 4.1.1 to 4.2.2.
Both machines had that same problem, and both could not play the rented HD movies.
The second TV2 has sicne been able to update to 4.2.2 when everyone else who had that problem went away this last weekend. So I have gone from 4.1.1 on two machines and no HD rentals to the current one updated to 4.2.2 and still no HD rentals.
The Standard def comes in fine and no real delay. And IF the movie previews are HD (when it is turned on in settings) then I have had NO problems viewing them.
I also have NO problem viewing HD MLB games on the TV2

The latest changes to the function to "Upload to FTP host" has rendered this useless - no point using a program like Muse if I can not easily and automatically upload the work to the webserver!

The latest changes to the function to "Upload to FTP Host" has rendered this useless - no point using a program like Muse if I can not easily and automatically upload the work to the webserver! I use BlueHost webhosting that has a primary domain and I have several domains with that account (as sub-domains or folders on this server) - with past versions of Muse when uploading pages it simply opened an alert window to tell me (what I already know) that the website I was uploading does not point to the primary domain BUT NOW Muse tries to create a new separate folder in the root directory of the primary domain - completely ignoring the directory path I am giving it - useless! Why make these senseless changes to the program - and so often - very frustrating it is like amateur ware!.

Hi Stephen,
There are some issues with the upload to ftp via Muse, which the engineering team is aware of and those will be fixed in a future build of Muse. At this point the work around would be to export the html from Muse and then upload via some third party ftp client like filezilla.
I will recommend that you keep an eye on our release notes page to get more updates on it - Release notes | Adobe Muse CC
- Abhishek Maurya

I have adobe id and a trail version of lightroom. my trail is finished. i can not use it anymore but i also can not download again lightroom via my creative cloud because i did already. so now i can not download and i can not use it

have adobe id and a trail version of lightroom. my trail is finished. i can not use it anymore but i also can not download again lightroom via my creative cloud because i did already. so now i can not download and i can not use it

Try: Convert Creative Suite 6 applications to Creative Cloud membership

I have itunes account and I'm trying to buy for itune store and asks me security questions which I can not remember and do not put a rescue optional email I should do?

I have itunes account and I'm trying to buy for itune store and asks me security questions which I can not remember and do not put a rescue optional email I should do?

Hello Jbamrah,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
Navigate to My Apple ID using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
Best of luck,
Mario

My ASA5540 8.2.4(4) can not monitor and failover on certain interfaces

Similar Messages

Maybe you are looking for