My audio and cam is not functioning anymore.my laptop model is Satellite A200-130.what shall i do?

im having a problem with my laptop.the audio and cam is not functioning.i dont know why/
please help me what to do.do you think program files about these were deleted?

Probably best to post in the Toshiba Support Forums Europe.
-Jerry

Similar Messages

My iPod does not turn on and it is not recognized by my laptop in iTunes... What can I do?

My iPod does not turn on and it is not recognized by my laptop in iTunes... What can I do?
Model iPod 2 Touch, 8G, It stoped working less than a month after it was purchased but I never sent it back for repairs or warranty to Apple.. Is there still a way to repair it on my own. It just simply does not turn on or charge and it is not recognized by iTunes when I plug it in to my MacBook Pro.
Please advise...

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar

Captivate 7 question - slide with audio and light boxes not functioning properly

I am currently working a project and cannot figure something out.
I have a slide with 9 smartshape buttons on it. When each button is clicked it brings up a lightbox. Each lightbox has it's own close button. When the lightbox is closed by the user then the user immediately sees the 9 button screen and can choose another button to view and read, and so forth. I have the lightboxes working fine.
Now, I added text to speech. It is a mere 15 seconds in length, but it contains some important content and the directions. I want the text to speech audio to stop playing if the user goes ahead and clicks on one of the 9 buttons which then brings up a lightbox. I want the audio to then resume when they close the lightbox. OK I have all of that working in a technical sense.
I've also tried this advanced action, but this stops the Audio entirely, however it does solve the autoadvance issue. so I am just trading issues.
I also have "back and next" nav buttons on the slide, so the user must click one or the other to proceed off the slide. Ok those worked.
Here is the issue. Once I added the text to speech audio, at the end of 17.3 seconds, whatever lightbox the user may be viewing and they hit the close lightbox button, captivate automatically sends the user to the next slide. No clicking "Next" or anything. I can't figure out why this is occurring.
Prior to adding audio the slide worked as it should with the user being able to click each of the 9 buttons to "read some info" then close it and click another button on the slide, etc. They could do this in any order they wanted.
When I added the audio, I set the advanced actions so if a user clicked on one of the buttons, the audio would stop playing until they came back to the main screen. Ok no problem getting that to function - except it stops functioning at the end of 17.3 seconds.
What am I missing?
Thanks for any help!!!
Michelle

Correct I have only 15 seconds of audio with the slide. no audio with any of the light boxes. Those are "read only" light boxes.
If the user clicks a shape button early, before the entire audio has played, I want the audio to stop, so the user can read the lightbox info, then as they click back to the slide away from the lightbox, I want the audio to resume playing - so they can hear the rest of the audio. But, this is where is doesn't function properly as when the audio finishes playing at 15 seconds. The next shape button the user clicks on to shows the lightbox, but when they click to close the lightbox, the lightbox closes then sends the user to the next slide. They haven't had a chance to view any of the other shape buttons and the information found in those corresponding light boxes.
I hope this clarifies.
Any thoughts?
Michelle

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

I upgrade my iph4 to ios 7.1.2 and the microphone is not working on video camera, is not working anymor also the microfon on speaker mode, please help me

Hy guys, i upgrade my ios 7.1.1 to 7.1.2 and now iths not working anymore my microphone on video record, the camera is working , is recording but without sound, and also the microphone on speaker, when i activat the speaker the microphon is not working. I do a full reset on my iph but still not working , also my girlfriend have same problem.Please help me, thx.

To rule out a software issue, try to set it up as new device, without using the latest backup, explained in this article:
How to back up your data and set up as a new device
If this does not help, the problem might be hardware related and the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
iPhone - Contact Support - Apple Support

Hi, I just got my Iphone 5s when I open my camera when my phone is lock te icons of the flash and the reversing camera is there, but when I try to open my camera from the apps camera the icons of the flash, the reversing camera is not there anymore?

Hi, I just got my Iphone 5s when I open my camera when my phone is lock te icons of the flash and the reversing camera is there, but when I try to open my camera from the apps camera the icons of the flash, the reversing camera is not there anymore?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

HT201401 My new Iphone 4 camera is not functioning. When I click the phone icon. The photo shutter appears, but nothing else happens. I've shut the phone off and turned on serveral times. The same thing occures.,

My new iphone 4S camera is not functioning. When I click the phone icon, the shutter appears. Then the screen only shows the shutter. When I go back to the home screen and click the phone icon again. The photo screen only shows a black screen. The button to take photos is locked the entire time. I've turned the phone on and off several times.

Basic troubleshooting steps outlined in the User Guide are restart, reset, restore from backup, restore as new. Have these ALL been tried?

I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

No Japanese carrier provides unlocking services. Therefore, your phone must have been hacked to unlock it. That hack was removed when you updated the software. You need to be a legitimately unlocked phone.
Best of luck.

Audio and video are not synched

I'm just beginning with FXP X (8), and just added a file to my event library, and created a new project. Dragged my first clip into the story line, and discovered that the audio and video are not syched. This is original footage from a video camera, no modifications or added tracks. But clearly the words of the speaker on camera are not synched with the video, both in the event library and in the story line clip. Is this operator error (lol)? TIA for any help, I'm stuck on square one.

You can right click on your clip in the storyline and Detach Audio.
After that, you can slide the audio until it's in sync or if it changes sync over the length of the clip, there is a way to correct that as well.
First, in the video, skim the playhead until you can see something that will "mark" a specific start of a sound and set a Marker (type M). Then select the audio portion (already detached) and find the start of the matching sound and type M (adds marker to the audio.) Turn on snapping and slide the audio until the two markers snap.
If you need to correct sync drift, use the same technique for markers near the end of the clip, but instead of sliding the complete audio clip, Retime the audio clip (type command-R) (set the playhead over the video marker - snapping won't work when retiming) and adjust the end of the audio until the two markers match up. Preserve Pitch (from the Retime menu) should already be selected.
HTH

Rpt-files do not function anymore after deploying to a different database

first: I use CR. 10.2.3600.0 and Asp.NET with Visual Studio 2005
I developed my reports against a Develepment-Database and everything worked fine.
Then, I published my Website with the reports.
Also I made a backup of my Develepment-Database to become the Productive-Database.
All pages of my website function well (database-queries etc.), but when I try to call one of my reports a queerish error message occurs:
"This field name is not known. Error in File C:\WINDOWS\TEMP\...\{...}.rpt: Error in formula. '{xyz.ds_id} = {?@ds_id} and '."
I mean, the database is the "same" as before?!?
(BTW: the logon to the database is set at runtime and is ok.)
Why do the reports not function anymore?
The only workaround I found is to open the report in Visual Studio 2005 again and select "Crystal Reports/Databases/Check Database" against the Productive-Database.
After that the report works! BUT THIS COULD NOT BE THE SOLUTION, this means that I cannot publish my website to a different database on a customers network!!!

I tried this:
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
        Dim myTables As Tables = myReportDocument.Database.Tables
        ' Get Location of Database from web.config
        Dim Location As String = String.Empty
        Try
            For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
                Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
                myTableLogonInfo.ConnectionInfo = myConnectionInfo
                myTable.Location = myConnectionInfo.DatabaseName & ".dbo." & myTable.Location.Substring(myTable.Location.LastIndexOf(".") + 1)
                myTable.ApplyLogOnInfo(myTableLogonInfo)
            Next
        Catch ex As Exception
            Me.LabelError.Text = "(SetDBLogonForReport) " + ex.Message
        End Try
    End Sub
and get the error:
ex.Message     "Fehler beim Laden der Datenbankinformationen.
Details: Die Datenbank-DLL 'crdb_query.dll' konnte nicht geladen werden.
Fehler in der Datei C:\DOKUME~1\MSCHAE~1\LOKALE~1\Temp\RzpReport {748C95B6-70EC-45B9-953D-64DA215BD9DC}.rpt:
Fehler beim Laden der Datenbankinformationen"
which means in english:
ex.Message     "Error while loading database information.
Details: the databse-dll 'crdb_query.dll' could not be loaded.
Error in file C:\DOKUME~1\MSCHAE~1\LOKALE~1\Temp\RzpReport {748C95B6-70EC-45B9-953D-64DA215BD9DC}.rpt:
Error while loading database information"
I debugged the code and recognized that the error appears while setting the .Location property...?!?
My DatabaseName is "Rezepturverwaltung".
Example 1 with a command:
Befor setting the Location of mytable the value of the prpperty is e.g. "command".
After setting the value like in code above the value changes to "Rezepturverwaltung.dbo.command"
Example 2 with a stored procedure:
Befor setting the Location of mytable the value of the prpperty is e.g. "sp_GetData".
After setting the value like in code above the value changes to "Rezepturverwaltung.dbo.sp_GetData"
What`s going wrong furthermore???
Edited by: Markus Schfer on Aug 31, 2009 9:56 AM

My ipad camera is not functioning very well

I can't take pictures!

Hey ozzmat,
Though the following comes from an iPhone article, the troubleshooting steps would still be valid:
Camera is not functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
via:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
If none of that seems to resolve the issue, I'd check out the iPad troubleshooting assistant and do steps 4 and 5:
iPad Troubleshooting Assistant
http://www.apple.com/support/ipad/assistant/ipad/
All the best,
David

ITunes cannot recognize touch/audio/video playback will not function

All right, I asked apple support about this and didn't even get the dignity of a response, so here goes. My computer crashed a while ago, and when we rebooted it, this started: Whenever I plug my iPod into the computer, I get a message saying "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again." So I followed those instructions, and I still get the same result.
A reason I think this might be happening is because I installed the iPod Touch update (not the one you have to pay for, but the one that puts that grey strip across the bottom of the home page), then the computer crashed. So maybe the update is installed on the iPod but not on iTunes? I'm not even sure how to get the update again to be honest.
There are a number of things that we have not reinstalled yet on the computer, like our audio/video playback. Whenever iTunes is started I get this: "iTunes has detected a problem with your audio configuration. Audio/video playback may not function properly." And it doesn't--we have no sound on the computer right now. That is something I would like to change ASAP, I'm just dying to hear some new music.
And when I say we have no sound, I mean zero sound capabilites: iTunes, Windows Media Player, even the internet, there is nothing at all.
I really don't know much about computers, and I just didn't know where else to turn. Thanks to anyone who thinks they can help.

Hey dbsabres06,
Use the steps in this article: http://docs.info.apple.com/article.html?artnum=93698 to uninstall and reinstall the Apple software on the computer. The Apple Mobile Device support is the driver that allows the iPhone and iPod touch to be recognized.
For the audio configuration issue, try the tips in this article:
http://docs.info.apple.com/article.html?artnum=304424
Not hearing audio from system events, or applications like windows media player might be a driver issue.
Try running your windows updates or checking your computer manufactures website for updates.
Jason

I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?, I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?

I am using Mac book with windows 7. But my sound card and cam is not working when booted through windows. How can I solve this?
Thanks

Assuming that you tried to install Win 7 in bootcamp.
Power on the machine and press and hold the "option" key when you hear the bong sound.
Select the Macintosh HD icon and press "return" or just click on the icon.
Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

Suddenly 2 of my apps (Facebook and Skype) will not function on my ipod. They just close down when I touch the ikon.

Suddenly 2 of my apps (Facebook and Skype) will not function on my ipod touch. They just close down when I touch the ikons.

If that does not work try resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regatta from Hamburg Germany

Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
 Cheers, Tom

My audio and cam is not functioning anymore.my laptop model is Satellite A200-130.what shall i do?

Similar Messages

Maybe you are looking for