My audio does not work playing videos for Firefox 4 but is fine when running WMPlayer, how can I fix/check this ?

I get no audio output from internet videos like tutorials for the new ff beta and such but it works fine when I run Windows Medial Player latest version . Is there an easy way to correct this or check for a correct fix ?

Try to install the new WMP plugin
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
See also http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

Similar Messages

  • I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?

    I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?

    I fixed it!!
    While not connected to any USB cable I put the iPad in recovery mode.
    To do that turn the iPad completely off. Press and hold the home button while turning the iPad on, once you see the apple logo release the home button.
    Turn on your OS X mac after it boots up connect the USB from iPod to Mac. iTunes should start. If not launch itunes.
    Perform the factory restore process paying attention to all of the screen message windows. Then set up the ipad like it was new.

  • My iPad2 will not play videos after I upgraded to IOS 5.1.1.  How can I fix it?at?, My iPad2 will not play videos afteri upgraded to IOS 5.1.1.  How cani ix that?

    I have an ipad2.  Ever since I upgraded to the IOS 5.5.1 I am having problems playing videos on Netflix or YouTube.  I do to have this problem on my laptop, so it isn't in my wireless router.  I have cleaned out the cache on the iPad and that didn't help. I've restarted it too. 
    I hope someone has an idea how to fix it.  I'm lost without it now.
    Thanks.

    Do the videos start to play and quit? Do they not start at all?
    Close all apps and restart the iPad and then try YouTube or Netflix again.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You can also try resetting/rebooting the iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Even if your the internet is OK with other applications doesn't mean that there isn't an issue with the way that the iPad is connecting to NetFlix and YouTube. You can always try rebooting your router - unplug it for about 30 seconds and then plug it in again.

  • Since I have upgraded to Firefox 4.0.1, it has been constantly freezing up. Now it does not work at all and I am unable to remove my profile. How can I remove my profile if Firefox does not work?

    I finally got so tired of Firefox freezing my computer that I tried to uninstall and reinstall. Upon reinstall, it will not work at all and I am unable to delete my old user profile. Is there any way to get rid of this profile so I can give one last attempt to get Firefox to work before switching permanently to Google Chrome? I really liked Firefox for years until they screwed it up with the recent changes.

    Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

  • MY WHATSAPP HAUTELOOK FACEBOOK APPLICATIONS ARE NOT WORKING WITH THE NEW UPDATE iOS 7 ITS DRIVING ME CRAZY! HOW CAN I FIX IT?

    I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
    AND MY APPLICATIONS ARE NOT WORKING AT ALL
    WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
    AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
    ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
    PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!

    If you do not have enough space, then you would have to free up more space.
    You can also update via itunes on your computer.

  • I just purchased this product and it does not work. I try to convert and get an error message. How do we fix this?

    I thought this was a reputable company. I am having serious doubts.

    Hi,
    I am sending you a private message to get some more details. Please check.
    Regards,
    Anoop

  • I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

  • HT201412 Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.

    Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.Mute us not checked in general settings. Reboot (off/on) has not helped. Deleted apps and reloaded them. Did not help. Any other suggestions thank you

    If you lose sound for games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • My audio does not work...

    My audio does not work. it says it's enabled, the troubleshooting tools i've used (several) find no problems, and yes, I have the latest drivers.  When I start Windows Media Player, it says: 
    "Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly."
    If I click Start, Control Panel, Sound... nothing happens.  nothing.  No error message, no window starts.  Could it be my audio card failed?

      Ok, it takes 3+ days to back up 400+GB of data, wipe Windows, reinstall all my software and restore all my data.  All that drama is not worth repairing a sound card.  Besides, we need to fix this for real, not duplicate the conditions that caused it to fail in the first place.  In the future, it's best not to bring up that option at all.  (We both know that rarely solves the issue permanently.)
    I'd simply replace this so-so HP before I put myself in a position to lose 3 days of work.
    However, I am still interested in finding a solution to this problem.  Do you think HP is capable of solving this?  If so, I'll look for a more detailed model number when I get home.
    Thanks,
    Gary

  • My audio does not work on my pavilion dv4. i just bought this laptop a few days ago. what's going on

    my audio does not work on my pavilion dv4

    This worked for me.
    Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences/com.apple.dashboard.plist.  Move the .plist to your desktop.
    Log out/in
    If it works, delete the .plist on your desktop.
    If  the same, return the .plist to where you got them from, overwriting the newer ones.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

  • My Facetime audio does not work on my MacBook

    My Facetime audio does not work on my MacBook, video is fine.  Volume set to max, internal mic is "on", mute is 'off'.  Advise

    While we all have MacBooks in this forum not all of us use FaceTime. There's a FaceTime Support Community where everybody uses FaceTime. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_app_store/facetime_for_mac

  • Audio does not fit with video FCPX 10.1.3

    Hi, I have a little bit unusual (at least for me) problem. I have old video from camera (maybe 20 years) on my HDD and I would like to edit it. Problem is the audio does not fit with video - when somebody talks it is apparently delayed. Can you give me a hint how to fix it in FCPX? I tried to detach audio and move just audio line but it is not possible.
    Thanks

    I tried it again from the beginning and now I can move audio to the right. I would just need to move video to the right, so audio stays still.. I need to delay audio so one option is to delete part of beginning of audio track or somehow move video to the right but it is not possible, i guess video track in the beginning cannot be empty....
    It is difficult to explain

  • Audio does not load with video

    The audio does not load with video in 12?

    Welcome to the forum.
    Can you provide us with a bit more information, please?
    What OS version are you using?
    What are the full specs. of the AV file, that is not Importing with Audio?
    What Project did you set up, at New Project?
    Exactly what steps were used to Import that AV file?
    Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
    Good luck,
    Hunt

  • Flash Player 10 does not work in IE or Firefox. What could it conflict with?

    I'm  using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
    For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash.  Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything.  I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
    Yup.  Nothing.  When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option.  I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
    When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
    Flash 10i.ocx (10.1.82.76)
    FlashUtil10i_ActiveX (10.1.82.76)
    FlashUntil10i_Plugin (10.1.82.76)
    genuinst (6.0.2800.1531)
    FlashUtil10i_ActiveX.dll (10.1.82.76)
    NPSWF32.dll (10.1.82.76)
    KB931433
    FlashInstall
    Install
    Flashplayer.xpt
    When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled.  I even enabled the other Adobe add-ons for Acrobat and such just to be sure.  Firefox shows Shockwave Flash and Shockwave for Director both to be enabled.  The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
    Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website.  I have DirectX 9.0c installed and everything else works fine.  I can play audio and video elsewhere with no problems.  It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
    Any ideas?

    Well, great.  I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it.  No such luck.  The video still plays, but no sound.
    All the sound settings are working with everything else from games to media players.  I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
    In the Flash folder, I now have:
    Flash10l.ocx (10.1.102.64)
    Flash Util10l_ActiveX (10.1.102.64)
    FlashUtil10l_Plugin (10.1.102.64)
    Genuinst (6.0.2800.1531)
    FlashUtil10l_ActiveX.dll (10.1.102.64)
    NPSWF32.dll (10.1.102.64)
    And the setup and text files that went with 'em.
    I've also done a system restart since then and zip.
    I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go.  The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
    Now what?  I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
    Date: Sun, 14 Nov 2010 17:37:07 -0700
    From: [email protected]
    To: [email protected]
    Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
    Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
    I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
    Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
    After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
    >

  • Flash player does not work with Ie or Firefox with win 8.1?

    Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
    If I try and install it it says it is already installed. Your onsite  installer says it is not applicable to my machine.
    I have followed all the normal steps re enabling addons and active filters etc.
    all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
    Version of flashplayer is 15....03.......

    Flash Player is a built-in component of Internet Explorer.  There's nothing separate to download or install.
    Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
    For problems where IE isn't being detected by sites that require Flash:
    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

Maybe you are looking for

  • Help! .MOV movie no longer appears when view website (but it's on my iweb)

    Back in 2007 I created a .mov file which I published via my iwebsite. And has been visable by pulling up my webpage on the internet. (I am a tiger user and still using ilife06.) However, recently I modified that webpage and republished it. But now, w

  • Advice on setting up this network

    I'm going to take apart my current network that is based on a CISCO router and make it into a roaming network based on the components listed below. I'm going to set the network up using a Mac. Airport Extreme N (one of the earlier ones) - to be used

  • Regretfully, I uninstalled Acrobat on cloud

    Although a subscriber to cloud, Acrobat XI stopped working; telling me that 'the trial period had ended'. I uninstalled Acrobat XI and now I can't reinstall it. The download manager shows it as 'up to date'??Help

  • Client call using   XML over Http using HttpClient

    Using HTTPClient while calling HTTPPost method to generate request for external system using XML over http using below code client.getState().setCredentials(new AuthScope(ipAddress,portNumber),new UsernamePasswordCredentials(username, password));    

  • Import from Oracle 8.1.6-7 to 8.1.5

    Hi folks I'm having this problem: a software supplyer from our company converted to us their proprietary database used inside a HR management system to an Oracle DB. They send to us the dmp file, but when we try to import we've got this: IMP-00010: n