My Audio is Out of Sync in Adobe Flash CS5.5

When I test my movie and i see it, It's fine. But when I ctrl+enter or test the movie in SWF the audio comes early. I have mutiple audio clips in the movie but once it gets to the last audio clip it comes early. Its p***ing me off. I've tried setting my FPS to 24.95, and I've tried messing around with my properties but it doesn't seem to work, Help please

what is in an audio layer? if there's a sound attached, then its sync property must be set to stream if you want the display and sound to sync.
have you changed all your sound's to stream and, if so, has that solved the sync problem.

Similar Messages

Buffering pauses and audio/video out of sync, single RTMP stream w/ simple embed

Hello,
I am running Flash Media Server on my dedicated CentOS host, and finally connected a single RTMP stream fine and am able to embed and play back the stream, but I am getting constant buffering pauses (approx every 5 secs) and audio/video out of sync by at least 5 seconds. My CPU with Flash Live Encoder is a powerhorse, never over 25% processor or ram usage while streaming, and my upload internet speed is averaging 6-8 mbps which should be more than adequate. I fear the issue is server side, however port 1935 is open and in use, not firewalled on CPU nor the host.
Any suggestions would be great.

Hello,
Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
<object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

Converting NTSC to PAL in CS5, the audio is out of sync-too slow. What do I need to adjust?

Hi. I had to purchase a new Sony video camera in USA (NTSC 29.9fps). We are PAL, so most of my holiday movie is PAL 16:9 widescreen. When I imported the clips from the NTSC camera, I converted the clips to PAL 25fps but the audio is out of sync and appears to be too slow. eg. a male voice is high pitched and not quite audible. Is it the 'bit rate' difference causing the problem and if so, how do I change that in CS5? The PAL clips off my old camera are imported as MPG files. The new camera files are MTS. I am not sure if this is important but would appreciate some help. Thanks.

Adobe doesn't have any tools that perform adequate NTSC<=>PAL conversions, in my view. You may be better off creating a separate video for the NTSC stuff, keeping it as NTSC. Your player should be able to handle it fine.

My audio goes out of sync after import

I have a bunch of masters of 1h documentaries that I've done using Adobe Premiere CS6. I've exported the masters using exactly the same specs:
Apple Pro Res 422 (HQ), 23.98fps, 1920x1080p, 48kHz, 16b, PCM audio.
I have to do some changes on the masters of these shows. They all play fine on several players like VLC, Quicktime, Mpeg Streamclip, etc. However after I import the masters into Premiere Pro CC, 3 out of 10 shows get the audio gradually out of sync, even on the source monitor before I put them on a timeline. The behaviour continues even after I place them on a timeline.
The project settings are the same as the masters and so are the sequence settings. I've tried to recreate the project, delete and re-import, duplicate the file and import that, and no matter what I do the same 3 masters go out of sync after the import.
I've tried to find a solution in many forums and despite noticing that several people have the same issue, no one has a valid solution for my problem.
I cannot go back to CS6 since my company updated their systems to CS7 so I can't even cross check.
Any suggestion will be most welcome.
Thanks in advance peeps.
NJ

Couple of suggestions.
First, rather than opening the Master export, go back to the original project. That should open fine in CC.
Second, with a CC subscription, you do have access to the full CS6 suite.

Video and audio goes out of sync when imported into Premiere

I have some videos ripped from some DVD that an acquaintance made, with an open source program called HandBrake, with the default "high profile" settings. When I play it both in VLC and in Quicktime, it plays just fine, but when I import it either in Premiere or in After effects, the video and audio goes out of sync (the video ran faster than the audio and when the video stops, the missing audio is trimmed).
Video info according to Premiere (in Spanish but you may get the meaning).
Ruta del archivo: [...].m4v
Tipo: Película MPEG
Tamaño de archivo: 667,7 MB
Tamaño de la imagen: 720 x 480
Profundidad en píxeles: 32
Velocidad de fotograma: 29,97
Formato de audio de origen: 48000 Hz - comprimido - Estéreo
Formato de audio del proyecto: 48000 Hz - Punto flotante de 32 bits - Estéreo
Duración total: 00:30:35:15
Velocidad media de datos: 372 KB / segundos
Proporción de píxeles: 0,8889

"HandBrake, these days, is almost entirely about H.264 video, aka MPEG-4 Part 10. HandBrake is migrating to quality-based encoding."
Hmmm. I use HC Encoder to make my DVDs because it's the only free encoder I've found with the much more professional Constant Q encoding option. But HC Encoder doesn't do HD sources for Blu-ray, so I've been wondering if I'd be stuck with the lame-*** consumer CBR and VBR options most encoders provide (including Adobe - hint, hint) when I eventually start working in HD. This is a very interesting program, Handbrake. I will have to check it out.

Audio falling out of Sync after importing into PP

Hello there,
I'm relatively new to this, so please when you're helping me, dummy it down as much as you possibly can.
I've been using Xsplit to record games while I play. I recorded a ~2 hour video and toward the beginning of the video it seems to be pretty a-okay but later in the video when I play it in premier pro, the audio starts falling out of sync.
I have no idea why it does this or what to do. When I play the original raw video the audio and video are both on time.
After googling this issue for about 40 minutes (and i'm not 100% sure what this means but I have a general idea) I read somewhere that the reason why the audio was out of sync was because xsplit uses a "variable framerate".
Not sure if this is true or not, but regardless, I tried exporting numerous times and the audio STILL falls out of whack.
I looked on xsplit and there was a setting that i could enable to force constant frame rate.... is this a solution to that problem?
Please, help me.
Thank you.

If your current video file DOES use a Variable Frame Rate, it will not edit properly in any version of Premiere
Force your software to create a Constant Frame Rate file and try again
Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
variable frame rate
or
VFR
You may now read all the previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5

IMovie Problems: Photo import and audio-video out of sync.

Photo import problem:
Some times, I have problems importing photos onto my new project, the photos will appear to be that just one same photo when played. It does not transit to the other photos following the first, it's just stuck on the first. Is this just an issue with iMovie '11? Are there any other ways to resolve this problem?
Audio-video out of sync:
I've checked some other discussions but I'd like to raise this issue again for APPLE. There are problems exporting my 7-minute film - the video and audio go completely out of sync no matter what format I export it to. There are not a lot of clips used. I'm now trying the method to detach the audio files from the video, hopefully it works.
These issues are bothering me, in addition to a failed firmware update on Mac OSX 10.7.2 a few weeks ago. I couldn't open my computer and I had to go to the Genius Bar to have them help me backup my files on my computer and reinstall the whole system again. Anyways, any help to the above iMovie issues are greatly appreciated. Just wish that Apple will address these current issues and not just focus on improving their products with awesome features ._.

Hello,
Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
<object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

Why does the audio go out of sync on my Apple TV?

Over the past couple of weeks I have noticed that the audio goes out of sync with any streaming video on my Apple TV (3rd gen) after about 20 minutes of usage. I have never had this experience in the past and am not sure why it is happening, but one theory is that it has something to do with AirPlay. I'm pretty sure that this problem only happens after I use AirPlay to connect my Mac to the Apple TV. I'm not sure if this is the exact source of the issue and was wondering if anyone else has experienced this, and if so, what solutions may be available. Thanks.

The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

Audio/video out of sync (audio delay) with PowerBeats wireless earphones.

I am having a problem with audio/video sync between my PowerBeats Wireless earphones with my MacPro and MacBookPro. I have tried pairing, playing the video, pausing the video, turning off the PowerBeats, tuning the PowerBeats on, then starting the video playback again. I have the same audio delay so this not working for me. Anyone have an update as to how to fix this audio/video sync problem?

I am playing MPEG-4 movie files. I did open MPlayerX from my dock, then pulled down File to select Open which then did show the folder where these movie files are stored. Then I was able to select a movie file, open it, and use "Decrease Audio Delay" to closely sync the audio with the video. I say closely because it is not perfect. Rather than stepping each increase or decrease in one tenth of a second, perhaps a finer adjustment would have been in milliseconds. This is the adjustment that I have with my AVR to sync the audio with the video, so I know this is a possible increment adjustment. The perfect adjustment was in between -0.4 and -0.5 second,however, this was not possible in one tenth second adjustments. The closest adjustment was with -0.4 second rather than with -0.5 second. So, adjustments in milliseconds could have been very near a perfect sync. Perhaps later versions of MPlayer will offer the adjustment selection in milliseconds. Nevertheless, this is working much, much better than before. Thank you so much. I have spent most of this day researching this problem and you have come up with by far the best solution. This problem goes all the way back to 2010 and possibly beyond for Apple products. There are hundreds of reports documenting out of sync audio/video issues with no solution that works as well as MPlayerX. Even the Beats support staff have no idea of how to resolve the audio/video out of sync.

Audio video out of sync?

Every movie I have rented and purchased the audio is out of sync with the video. If I pause the movie sometimes it goes back into sync but doesn't last long before it goes out of sync again. I have been trying to resolve this issue for the past week. I have turned off everything on the computer that manages audio, made sure all drivers and software is up to date. I have uninstalled itunes and reinstalled. I've set itunes and windows bit rate the exact same and nothing seems to fix the problem. I am running Windows 8 on a new Samsung laptop, previously I was using a Gateway laptop with no problems. From my reasearch the past couple days i see this has been on on going problem with itunes users and I hope someone has a fix. I just rented a movie from Xbox Video and it worked perfectly. I think I am going to have to make the switch to Xbox but I have movies I have downloaded to itunes and would like to watch them.
Any help would be appreicated.

Hello bjwilson22,
I was researching the symptom you describe and reocmmend this article named Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues found here http://support.apple.com/kb/ts1718
It is pretty length, but also thorough and I feel has the best advice to help troubleshoot the issue.
All the very best,
Sterling

Audio goes out of sync when i open project on diff macs

i have an iMovie project created on an iMac saved to an external.
I go to open the project up on my macbook and the audio is out of sync.
I go back to my iMac with the same project and it works just fine.
I'm a bit confused because both macs use Mac OS X 10.6.4 and iMovie 8.0.6
what other differences might there be?
any input is appreciated as I'd love to work on projects while out in the field!

Try exporting the iMovie project as a single full quality dv format quicktime file.
I use iMovie6 HD and this is my usual procedure that works well.
Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
iDVD seems to work better with iMovie source that has fewer clips.
BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
Hope this helps.

Why does my audio slip out of sync when exporting?

I am exporting an HD edited video. I shot 1280x720 & editing in FCP 6.0.5. I am using APPLE PRO RES 422 1280x720 30fps 48kz . Should it be (HQ)?? - I do not select re-compress all frames or make self-contained. I just want a QT reference file to view and then burn a DVD. My clip is 43 minutes long. HOWEVER, the audio drifts out of sync BIG TIME. Why is that??
Here are my sequence settings:
1280x720 Aspect Ratio HDTV 720p (16:9)
Square Pixels
H.264
Audio at 48kHz

That's what I thought, however, when I play back the .mov file after exporting using "current settings", that's when I experience OUT OF SYNC audio. Do I ignore that and drag and drop that file into iDVD and let iDVD crunch it??? Is it just the playback of that .mov file that is out of sync?

When I use media manager to upres clip audio goes out of sync

I captured a clip and put it in DVNTSC 48kHz timeline at OfflineRT NTSC (Photo JPEG) then used the media manager to create a new sequence at full DV NTSC 48kHz res. I choose "Create offline", "set sequences to DV NTSC 48 kHz", and check all the boxes. I save a new project, open the new timeline and recapture the clip. The video looks great--it recaptures in full DVNTSC 48kHz res. But the audio is out of sync (by about 28 frames it looks like). What am I doing wrong? (This is the first time I'm trying this offline-then-online-process.) thanks.

Try exporting the iMovie project as a single full quality dv format quicktime file.
I use iMovie6 HD and this is my usual procedure that works well.
Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
iDVD seems to work better with iMovie source that has fewer clips.
BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
Hope this helps.

Captivate 6 editing - on timeline, audio is out of sync after pausing

I am trying to create a software demo for my company. I am using the HD video and then have imported audio recordings over the video.
The big work portion of this project is adding call-out smart shapes on the video during certain portions to highlight what the voiceover is discussing. However, when I pause the timeline so I can add a smart shape, upon resuming from the pause, the audio is out of sync. This happens even if I hit Stop on the timeline, and use my mouse to move the playhead.
This is adding significant amounts of time to my video editing process, to the point where I am missing deadlines for having the videos created. The only solution I have found to guarantee that the call-out smart shapes are in sync with the audio instructions is to Play the timeline from the very beginning, each time after pausing the audio.
Is anyone else experiencing these issues, or know of a way to fix it? This is adding enough time to the editing process that our company is looking into other video editing softwares to replace Captivate.

I always copy the entire PRIVATE folder from camera to hard drive, and then importing from that hard drive folder in to project.
I am saing original, becouse I do not convert them to diferent format. And how could be the original files of video and audio out of sync???
I am using Premiere for 10 years, I am not new to this software, but never had this problem.

N95 Recorded Video: Video and audio is out of sync

Audio and video is out of sync when I play videos recorded with N95 on my PC. If have used different PC applications to play the video, but all exhibit the same problem.
In the beginning of at video it seems that the audio is about 400milliseconds ahead of the video - you hear the sound first. The different in audio and video is not constant. In a long video (30-50minutes) it is quite unpretictable how video and audio is out of sync in the end.
To experience the problem yourself record a long video sequence with a N95.
1 .Record something where it is easy to see if video and audio is in sync.
2. Transfer the recording to a PC.
3. Play the recording using VLC (www.videolan.org)
Another way to experience the problem is to convert the recording to AVI format at play it in MediaPlayer or WindowsMovieMaker. To convert a N95 video recording to AVI format use Mp4Cam2Avi.
http://sourceforge.net/projects/mp4cam2avi/
The video recording settings I use on my N95 are:
Best Quality
No Video Stablisation
Firmware version 21.0.0.16.
I think the video quality of N95 recordings is quite good, so I would really like to be able to view and edit the recorded vidoes on my PC.

28-Mar-2008 09:50 PM
el_loco wrote:
I've seen this issue, but it's not so critical for me. It doesn't happen 100% of the time or in most situations it's very hard to see.
You can edit videos on your PC, just converting them to AVI then using any Video Editor on the PC.
Yes while editing separate the audio channel from the clip and reinsert at the begining of the clip. This will minimise sync issues.To get accurate sync increase the timeline so that you are able to the see audio squiggles as a waveform.
If my post has helped you please click the white star on the right

My Audio is Out of Sync in Adobe Flash CS5.5

Similar Messages

Maybe you are looking for