My audio levels are too low, what can I do about this?
I'm recording my voice, and using an external mic.
I plan on rerecording once all edits are done, but what can I do about this? I''m as close to the mic as possible. Whats my issue!?
Check the Audio settings in Captivate. You may need to increase the gain value.
Is this a USB microphone?
Similar Messages
-
Wi-Fi connection levels are too low
Hi, I acquired a used notebook Pavilion g series with Atheros ar9485 Wi-Fi device but its connection levels are too low compared to my older notebooks. I updated its driver to 10.0.0.313 but to no avail.
Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you are having connection issues with your wireless adapter. I am happy to assist with this.Please post the full product number for your notebook. See the following, if you need help with that information. How Do I Find My Model Number or Product Number?Are you trying to use this notebook from the same location from where you were connecting with the other device?Does the signal strength vary significantly in that area?Have you tried connecting from different locations of to a different wireless network? Please let me know. -
help me plz.. i,ve got a apple i phone 4 and i'm the 2 owner of it and i dont have it's apple id and passward for it and 1st owner doesnt know it too so what can i do for this plz help me....
Neither can we. Only the original owner can help you, surely he/she can reset their password.
-
i can not register my card because of my county code is not listed on the drop down. I cant use any other county code. what can i do about this. My county code is ILO. need help please
Are you sure you have a 3GS and not a 3G? The 3G cannot be updated to iOS5. What version are you on now?... Settings > General > About > Version
-
I've recently downloaded an album but some songs only play half way through and i'm no longer able to hear any audio. What can i do about this? Thanks
I am sorry to hear. Yes it's very disappointing and the fact that you can't at least re-download your purchase makes it that much more irritating haha well thank you and good luck!
-
I have upgraded my itunes to 1.4 on my windows xp service pk 3 system and now it won't recognize my ipod and let me sync it half of the time. What can I do about this?
It's not a "Reset" (except for the Reset of the iPod and possibly powering off the computer). It's meant to be a test to see if there might be interference between connected USB devices, or if the total power draw of all connected USB devices is too high for your computer's USB bus. If it always works when the iPod is the only connected device, but only sometimes works when you connect it with other devices, it may be one of those issues. When it works, the set of connected (or active) devices is OK.
If this is the case, you can go through a process of elimination to determine which device or combination of (active) devices causes the problem. NOTE: If one of your devices is an external hard drive that gets power from the USB port, power draw may be higher if it is currently active (spinning). Also, the power draw of the iPod may be higher when it is charging its battery and/or syncing.
Or are saying that the connected USB devices does not seem to matter, but doing a computer shut down always makes the iPod connect immediately after startup, but then the problem returns later? -
I have forgotten my passcode on my iPad. It was synced to a different computer that I no longer have. What can I do about this and if it at all possible without losing everything that was on it. Thanks for the help.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
````````````````
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
Cheers, Tom -
My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing. What can I do about this?
Hey Dr kris,
Thanks for the question, and welcome to Apple Support Communities.
I understand that you are having issues connecting to Wi-Fi networks with your iPad mini. The following troubleshooting assistant may lead to a resolution:
Apple - Support - iPhone - Join a network Assistant
http://www.apple.com/support/iphone/assistant/wifi/
For more in-depth troubleshooting, refer to the following article (refer to the "Unable to connect to a Wi-Fi network):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks,
Matt M. -
so I've been using my ipod touch for three months already. Then I noticed that the more I use my camera, which is not very often, I only use it to snapshot wonderful events in my life, the more "crashing" becomes often in my ipod. There are several times that I will repeatedly click my camera button just to open it as it keeps on crashing. my software is up to date, iOS 6.1.3 and I thought that updating it and restarting it will do the trick. Also, the panorama feature of my camera is kind of defective, It's very dark and the images keep in getting ragged on edges. Like it's been cut with sheers or any sharp material. What can I do about this? Is there any way for me to get this fixed?
Is the camera damaged? Could be a hardware problem.
Try:
Close the Camera app in the multitasking bar, then try again.
Restart/Reset/Restore your iPod. In that order. -
im trying to connect to apps store and to download apps but i cannt. the massege that say me is your payment method was declined. what can i do about this?
Try removing said card then re-enter all card details, if still no joy then try a different card to see if it is the card or a problem with your iTunes account, one other thing that you could try is changing your iTunes password as this sometimes cure thing as well.
Also have a look at your purchase history to see if you have any items that are still waiting for payment as this can sometimes screw up your payment method, if this is the case then I would defiantly try a different card.
If none of the above work then I would contact iTunes support. -
My on and off button is not working anymore and my iphone fell again today so the numbers 7,8,9 not working and so i cant enter my password to access my iphone. Pls, what can i do about this to access and change my password?
Changing your password won't help. It is a touchscreen so if 7,8,9 are not working then that part of the screen will not work if you were to get it unlocked.
TeeKnows is right. You need to contact Apple for a repair. -
I'm trying to verify my email address. I got the verification email, clicked the link, signed in and was sent to a page that said my session had timed out. What can I do about this?
@Dirty55
If you're accessing the page from your mobile, make sure the cookies are turned on.
Settings > Safari > Privacy Browsing OFF > Accept Cookies ALWAYS
If this doesn't fix the issue, have you tried validating from a desktop? -
My screen got bigger and when I move the mouse, the screen moves as well. What can I do about this?
Actually as Roam said, you can keypress, Option + command + 8
But i think wat you asking is that you dont want the screen mving when you move the mouse. Right?
For that you can, goto, System Preference -> Accessibility -> Zoom -> More Options...
Once you click more option, you'll get a window. Look at the bottom of the window for 3 options with bullet buttons. SELECT "ONLY WHEN THE POINTER REACHES AN EDGE" and click "DONE"
Viola!!! You're troubl's are over!!! -
I'm stuck on "waiting for items to copy" when I try to sync my laptop and iPod touch. It was fine until the latest update. It's very frustrating. What can I do about this?
Hi maasailand giraffe,
Welcome to the Support Communities!
First of all, thanks for the detailed notes of the troubleshooting steps you've already tried. It's hard to pinpoint exactly what is going on in your specific case, but I do have a few more ideas for you to try.
Starting with just one of your iPads, when you get stuck on the "waiting for items to copy" step, just disconnect your iPhone. There are probably some orphaned or corrupt files that need to be addressed. I would suggest closing all of your open apps and then backing your iPad up to iCloud. Then review the articles below to move or delete any big files on your device. These can include Voice Memos (iPhone), music, photos on your camera roll, photos or videos that are attached to your Messages, email attachments, etc.
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/HT1867
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503?viewlocale=en_US
iOS: Import personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/ht4083
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Remember that you can download any content you have purchased directly to your iPad.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
If you need to sync from iTunes, check your settings in the Summary tab to be sure you are only syncing items you have placed a checkmark in front of.
iOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Give this a try on one of your iPads, and hopefully these steps will work for your other devices as well.
Cheers,
Judy -
every time i open an app it will close with in a few min and wont open at all if music is running in the backround. what can i do about this?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod
Maybe you are looking for
-
Cant restore back up from memory card
frndz, am using n73 normal edition.my prob is i cant restore my back up files from my memory.whn i try 2 do that the phone is searchin the back up file with in sec i am getting the message "phone will restart".aftr restarting fon nothing is happening
-
How to Transport standard text in scpits from 1 client to other
HI I am veerendra, Can you please tell me, How to Transport standard text in scpits from 1 client to other THanks, Veerendra
-
Biztalk 2009 with WCF adapter running on 64 bit
Hi experts, I'm running a wcf adapter 64 bit send handler/host on biztalk 2009. Will it work? or does it require the adapter to be configured on 32 bit?
-
Please tell me the difference between CREATE OBJECT & CREATE DATA ,statements in CRMTECHNICAL
Please tell me the difference between CREATE OBJECT & CREATE DATA ,statements in CRMTECHNICAL
-
Power Manager and other operating systems
I'm looking to run Linux on my T410. I currently have my power manager in windows set to charger my battery to a max of 70% and start when it is below 60%. I did this because I'm usually plugged in (If I'm not the laptop is asleep or I'm not using