My audio output is acting up

Lately the audio output is cutting out on the right speaker both in the built in speakers and the headphones. I have been unable to find any way to fix this problem. I can reboot and sometimes that cures the problem for a while.

go into system preferences and click the sound tab (under hardware). Then select the output device ie internal speakers etc, then slide the balance marker to the centre. This might fix it, if not you've probably got something wrong with the actual speakers.

Similar Messages

Audio output issue using Airplay Mirroring over Apple TV

I'm using the newest version of Apple TV to mirror my display from my MAC using the newest macbook pro with mountain lion 10.8.
The problem i'm having is whenever i try to change audio output in airplay mirroring mode the mirroring shuts off. I can't change outputs!! It's like it's forcing the macbook to use the apple tv hdmi port for audio. I NEED to use my USB DAC which i have connected to my MPB.
Grateful for any ideas, i did not expect the software to act as crappy as this. Using different audio sources successfully is something i took for granted.

Well, since I can't imagine this being a feature of Airplay I assume we're either hitting the limitations of the technology, or it's a bug. Knowing Apple I suspect it's a limitation of Airplay, perhaps because audio and video are sent out as an integrated stream?
I agree, this does suck, since all I have to use as audio is the tiny 1 watt speaker on my Epson projector! I can't even use audio out from the Apple TV, since all it has is that useless optical port. Very frustrating indeed.

Asrock ION330/Nvidia HDMI - No audio output

Machine was running archlinux and not been upgraded in over 6mths but HDMI audio worked fine. Decided to do a scratch build since all the changes in that time and have a nice clean system.
If it helps, this is what I install. Ssed this exact same install process for another Asrock ION330 and Acer Revo3610 (both same hardware) but neither use HDMI at all. Both VGA with either optical or analog audio. Both work with no additional config.
pacman -Sy nfs-utils screen ntp alsa-utils mlocate xorg-server xorg-xinit xorg-server-utils mesa nvidia ttf-dejavu xfce4 gamin slim mythtv unrar lirc xbmc wget
Get no sound output but also zero errors on any of the following commands. I should add that the receiver does not detect any audio coming in, ie it usually identifies how many channels of audio and type it is receiving.
aplay /usr/share/sounds/alsa/Front_Center.wav
speaker-test -Dhdmi:NVidia -c 6
aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
Output of devices and modules:
[root@lounge ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
[root@lounge ~]# aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, VT1708S Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, VT1708S Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
[root@lounge ~]# lsmod |grep "snd"
snd_hda_codec_hdmi 27561 1
snd_hda_codec_via 38667 1
snd_hda_intel 27668 0
snd_hda_codec 100743 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 6429 1 snd_hda_codec
snd_pcm 77827 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7427 2 snd_pcm,snd_hda_intel
snd_timer 18935 1 snd_pcm
snd 60157 7 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5443 1 snd
Tried a couple different things either from the wiki or google searching, individually with a reboot between but no change.
# Keep snd-pcsp from being loaded as first soundcard
vi /etc/modprobe.d/alsa-base.conf
options snd-pcsp index=-2
# something i used on the old working system, doesn't help but not sure why I did it
vi /etc/modprobe.d/alsa-base.conf
options snd-pcsp index=2
#no modprobe conf, try wiki
vi ~/.asoundrc
defaults.pcm.card 0
defaults.pcm.device 3
defaults.ctl.card 0
Here is the output of alsa info script (http://www.alsa-project.org/main/index. … p_To_Debug) with all defaults, ie no modprobe changes etc.
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.61
!!Script ran on: Fri Mar 1 02:42:57 UTC 2013
!!Linux Distribution
Arch Linux \r (\l) NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Product Version: To Be Filled By O.E.M.
Firmware Version: P1.60
!!Kernel Information
Kernel release: 3.7.9-2-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.7.9-2-ARCH
Library version: 1.0.26
Utilities version: 1.0.26
!!Loaded ALSA modules
snd_hda_intel
!!Sound Servers on this system
No sound servers found.
!!Soundcards recognised by ALSA
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfae78000 irq 21
!!PCI Soundcards installed in the system
00:08.0 Audio device: NVIDIA Corporation MCP79 High Definition Audio (rev b1)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:08.0 0403: 10de:0ac0 (rev b1)
Subsystem: 1849:0397
!!Loaded sound module options
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y
!!HDA-Intel Codec information
--startcollapse--
Codec: VIA VT1708S
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11060397
Subsystem Id: 0x18490397
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=1, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Front Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="VT1708S Analog", type="Audio", device=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Surround Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="VT1708S Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="VT1708S Analog", type="Audio", device=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x17
Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Control: name="PCM Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="PCM Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Line Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Line Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x19 0x19] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 7
0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25
Node 0x17 [Audio Selector] wcaps 0x300501: Stereo
Control: name="Input Source", index=0, device=0
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 6
0x1f 0x1a* 0x1b 0x1e 0x1d 0x16
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Surround Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x11
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410110f2: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x2
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x18
Node 0x1a [Pin Complex] wcaps 0x400581: Stereo
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Pincap 0x00002334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x01a19036: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x6
Pin-ctls: 0x21: IN VREF_50
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x26
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Control: name="Line Jack", index=0, device=0
Pincap 0x00002334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x0181303e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x3, Sequence = 0xe
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Front Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Line Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x16
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 2
0x16* 0x25
Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x42a190f8: [N/A] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x8
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 2
0x16* 0x25
Node 0x1f [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x00000020: IN
Pin Default 0x503701f7: [N/A] CD at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x7
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital
Control: name="SPDIF Phantom Jack", index=0, device=0
Pincap 0x00000010: OUT
Pin Default 0x074511f0: [Jack] SPDIF Out at Ext Rear Panel
Conn = Optical, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
Conn = RCA, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x15
Node 0x22 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410160f1: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0xf, Sequence = 0x1
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x26
Node 0x23 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410120f4: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0xf, Sequence = 0x4
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x27
Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Center Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Volume", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Center Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Switch", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x24
Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x25
Codec: Nvidia MCP79/7A HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de0007
Subsystem Id: 0x10de0101
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Audio Output] wcaps 0x211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Pincap 0x00000014: OUT Detect
Pin Default 0x18560110: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560121: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x08 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560122: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x2
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x08
Node 0x0a [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560123: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x3
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0a
Node 0x0c [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560124: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x4
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0c
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 8 Mar 1 13:41 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 7 Mar 1 13:41 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 6 Mar 1 13:41 /dev/snd/hwC0D3
crw-rw----+ 1 root audio 116, 5 Mar 1 13:41 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Mar 1 13:41 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Mar 1 13:41 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Mar 1 13:41 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116, 1 Mar 1 13:41 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Mar 1 13:41 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Mar 1 13:41 .
drwxr-xr-x 3 root root 240 Mar 1 13:41 ..
lrwxrwxrwx 1 root root 12 Mar 1 13:41 pci-0000:00:08.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
!!Amixer output
!!-------Mixer controls for card 0 [NVidia]
Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 21'
Mixer name : 'Nvidia MCP79/7A HDMI'
Components : 'HDA:11060397,18490397,00100000 HDA:10de0007,10de0101,00100100'
Controls : 43
Simple ctrls : 17
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [3.00dB] [on]
Front Right: Playback 25 [81%] [3.00dB] [on]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Dynamic Power-Control',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Line' 'Stereo Mixer'
Item0: 'Mic'
Simple mixer control 'Smart 5.1',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
!!Alsactl output
--startcollapse--
state.NVidia {
control.1 {
iface MIXER
name 'Front Playback Volume'
value.0 42
value.1 42
comment {
access 'read write'
type INTEGER
count 2
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.2 {
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Surround Playback Volume'
value.0 42
value.1 42
comment {
access 'read write'
type INTEGER
count 2
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.4 {
iface MIXER
name 'Surround Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.5 {
iface MIXER
name 'Center Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.6 {
iface MIXER
name 'Center Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.7 {
iface MIXER
name 'LFE Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.8 {
iface MIXER
name 'LFE Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.9 {
iface MIXER
name 'PCM Playback Volume'
value.0 25
value.1 25
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 300
dbvalue.1 300
control.10 {
iface MIXER
name 'PCM Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.11 {
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -1650
dbvalue.1 -1650
control.12 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.13 {
iface MIXER
name 'Capture Volume'
index 1
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -1650
dbvalue.1 -1650
control.14 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.15 {
iface MIXER
name 'Input Source'
value Mic
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Mic
item.1 Line
item.2 'Stereo Mixer'
control.16 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.17 {
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.18 {
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.19 {
iface MIXER
name 'Line Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.20 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3075
dbvalue.0 0
dbvalue.1 0
control.21 {
iface MIXER
name 'Smart 5.1'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.22 {
iface MIXER
name 'Dynamic Power-Control'
value Disabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
control.23 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.24 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.25 {
iface MIXER
name 'IEC958 Playback Default'
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.26 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.27 {
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.28 {
iface MIXER
name 'Master Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.29 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.30 {
iface CARD
name 'Line Out Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.31 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.32 {
iface CARD
name 'Line Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.33 {
iface CARD
name 'SPDIF Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
control.34 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
comment {
access read
type INTEGER
count 6
range '0 - 27'
control.35 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.36 {
iface PCM
name 'Capture Channel Map'
index 1
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.37 {
iface PCM
device 1
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.38 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.39 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.40 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.41 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.42 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.43 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access read
type INTEGER
count 8
range '0 - 27'
--endcollapse--
!!All Loaded Modules
Module
nfsv4
auth_rpcgss
nvidia
snd_hda_codec_hdmi
ir_lirc_codec
lirc_dev
joydev
ir_mce_kbd_decoder
ir_sanyo_decoder
ir_sony_decoder
hid_generic
ir_jvc_decoder
usbhid
ir_nec_decoder
snd_hda_codec_via
hid
mceusb
rc_core
snd_hda_intel
i2c_nforce2
i2c_core
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_timer
forcedeth
snd
soundcore
shpchp
pci_hotplug
evdev
psmouse
mperf
serio_raw
pcspkr
button
processor
wmi
coretemp
microcode
nfs
lockd
sunrpc
fscache
ext4
crc16
jbd2
mbcache
usb_storage
sr_mod
cdrom
sd_mod
ohci_hcd
ahci
libahci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x19 0x410110f2
0x1a 0x01a19036
0x1b 0x0181303e
0x1c 0x01014010
0x1d 0x422140f0
0x1e 0x42a190f8
0x1f 0x503701f7
0x20 0x074511f0
0x21 0x474411f0
0x22 0x410160f1
0x23 0x410120f4
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D3/init_pin_configs:
0x05 0x18560110
0x07 0x58560121
0x09 0x58560122
0x0b 0x58560123
0x0d 0x58560124
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
!!ALSA/HDA dmesg
[ 6.093571] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 6.093614] hda_intel: Disabling MSI
[ 6.093710] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 6.743392] IR keymap rc-rc6-mce not found
[ 7.150166] Disabling lock debugging due to kernel taint
[ 7.450271] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
[ 7.450581] input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
[ 7.450836] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
[ 7.451099] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
[ 7.453217] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20
FWIW, I even tried changing the HDMI cable, turning the amp on before or after the PC etc. No change.
Last edited by dave00 (2013-03-01 03:03:42)

Default install, clean boot and I get this error but the info above indicates there is a sound device. Confused!
[root@lounge ~]# systemctl status alsa-restore.service
alsa-restore.service - Restore Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-restore.service; static)
Active: inactive (dead) since Fri 2013-03-01 18:01:19 EST; 1min 2s ago
Process: 241 ExecStart=/usr/sbin/alsactl restore (code=exited, status=19)
Mar 01 18:01:18 lounge systemd[1]: Starting Restore Sound Card State...
Mar 01 18:01:19 lounge alsactl[241]: /usr/sbin/alsactl: load_state:1696: No soundcards found...
Mar 01 18:01:19 lounge systemd[1]: Started Restore Sound Card State.
[root@lounge ~]# systemctl status alsa-store.service
alsa-store.service - Store Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-store.service; static)
Active: inactive (dead)
Mar 01 13:41:03 lounge systemd[1]: Started Store Sound Card State.
Mar 01 13:45:54 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 13:45:55 lounge systemd[1]: Started Store Sound Card State.
Mar 01 14:04:19 lounge systemd[1]: Started Store Sound Card State.
Mar 01 17:25:11 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 17:25:11 lounge systemd[1]: Started Store Sound Card State.
Mar 01 17:39:05 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 17:39:05 lounge systemd[1]: Started Store Sound Card State.
Mar 01 18:00:51 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 18:00:51 lounge systemd[1]: Started Store Sound Card State.
Journal
Mar 01 18:01:19 lounge kernel: hda_intel: Disabling MSI
Mar 01 18:01:19 lounge kernel: snd_hda_intel 0000:00:08.0: setting latency timer to 64
Mar 01 18:01:19 lounge alsactl[241]: /usr/sbin/alsactl: load_state:1696: No soundcards found...
Mar 01 18:01:19 lounge systemd[1]: Started Restore Sound Card State.
Mar 01 18:01:20 lounge systemd[1]: Started Linux Infrared Remote Control.
Mar 01 18:01:22 lounge kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
Mar 01 18:01:22 lounge systemd[1]: Starting Sound Card.
Mar 01 18:01:22 lounge systemd[1]: Reached target Sound Card.
Edit: Am I correct in saying that the issue is because alsactl restore is running before the sound card?
Last edited by dave00 (2013-03-01 07:30:12)

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Is there a fix for Mountain Lion audio output settings after the laptop goes to sleep and wakes back up?

Mac Book Pro running Mountain Lion OS X 10.8.5 after the notebook sleeps audio and video does work (for example on YouTube). I have been able to temporarily work around this by toggling the settings on Built-in Output in Audio Midi Setup, Audio window between 2ch-20bit Integer and 2ch-24bit Integer. But this is a temporary fix until the laptop sleeps again.
When it's not working, all system sounds (emails "dings", delete file "swish", etc.) are silenced, and video playbacks on YouTube and elsewhere freeze and have no audio until the Audio Output settings are toggled then they all immediately start working.
Has anyone encountered the same? Have a long term fix for this annoyance?
I cannot upgrade the OS to 10.9 Mavericks yet because of a corporate policy - there is some conflict with 10.9 and our corporate VPN connection.

Apple support article:
Startup Grey Screen
You can try to check your hard drive.
Apple Hardware Test doesn't catch everything, so even if it doesn't find a problem, you could have one.
Apple Hardware Test

Help!! No AUDIO output from iMac through FW to mixing board (zed r16)

With my system stated below, I run an Allen-Heath ZED R16 board via FW. PROBLEM: I get NO Audio output to the R16 when I play iTunes or DVD/CDs in the iMac.
I DO get audio feed when I playback projects from Logic.
I have checked all System Prefs on the iMac (cahnged to the ZED); on Logic (changed to the ZED). I tried all different channels, routing, etc. NOTHING.
Can someone help?

Well, the Allen-Heath support site had the answer... quite surprised and pleased!!
Have to reconfigure the iMac speakers in the Audio/Midi preferences. The details are found in this URL:
http://allen-heath.helpserve.com/index.php?m=knowledgebase&a=viewarticle&kbarticleid=238
The ZED R16 is a great board but certainly not Plug' n Play.

Help! No Audio output In Logic Express 7

I have been running logic 7 Express with a MOTU Traveler for over a year now (with very few problems), and just this morning i have encountered a very puzzling problem. When i opened the song i was working on last night, i found that there was no audio output--just intermitant digital beeps at very high pitches (10-15k). i tried opening other songs; same problem. this problem does not occur when using the built in audio driver, so i was thinking it must be a hardware issue, but iTunes seems to output as per usual THROUGH THE MOTU so i'm really scratching my head here. hard drives etc seem to mount so the firewire port seems to be ok. i'm getting the same results (no audio playback and high digital pitches in Quicktime and Live as well...
has anyone with this setup ever experienced anything like this???!!!
thanks for reading,
dave
PowerBook G4 12" Mac OS X (10.4.6) 1.33 GHz, 1.25gb ram, MOTU Traveler

Check you preferences in LE for what you have selected for output. Also, and I am not 100% sure, because for me this is always already set, make sure each track has Output 1-2 on the channel strip. On my setup, I have my Tascam US-122 set for both input and output, then my monitor system is connected to the US-122. Now I don't recall which, but I think it was Logic that wants both input and output to be the same device. I am pretty sure, because I know I have used both in GB. Also, on my US-122, there's a switch for mono, so my recording comes in both speakers, as well as a direct monitoring switch, with a separate volume control, so I can balance my recording with the tracks I am playing to, to my liking. I am not familiar with your unit, but I'd think it'd have some similar features. Hope this helps some, anyway.

Help! No Audio Output device is installed

My speaker in bottom right for My sound say "No Audio Output Device Is Installed" and i have tried to go through many things to solve such as go into device manager and enable or update through there etc...to no avail.
I stumbled across a thing that worked for most people. Recovery Manager. but. I don't have it on my computer to try so i have no other options to turn to. Can someone please help on how to fix this issue

Dear Customer,
Welcome to the HP Consumer Support Forum!!
To isolate the issue please perform the steps below:
1. Restart the computer.
2. Check the Sound icon in the taskbar.
3. If the icon has an X in the lower corner, click the Sound icon in the taskbar or
4. Right-click the icon, and then click Troubleshoot sound problems.
5. The audio troubleshooter checks for sound problems. When the troubleshooter finishes, it displays the results.
6. If the computer has sound, the issue is resolved.
Install Original Realtek High Definition Audio Driver from the link below:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-Slimline-s5000-Desktop-PC-series/3942804...
From the above link click on Driver-Original > Original Realtek High Definition Audio Driver > Download and install the same.
In case the issue still persists and if the audio was working fine earlier, you may perform system restore to previous working condition using the steps mentioned in the link below:
http://bertk.mvps.org/html/restoresysv.html
Hope this helps, for any further queries reply to the post and feel free to join us again.
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
GR1
Although I am an HP employee, I am speaking for myself and not for HP

Help, basic question, no audio output?

I have a Mac Pro running latest version of Logic Pro. I'm not new to audio software (come from a Cakewalk background on the Windows platform), but I'm relatively new to Mac Pro and Logic Pro.
I seem unable to get any audio output from my setup when using a Logic Midi Track (i.e. GM Device Piano).
My hardware:
Mac Pro
M-Audio Axiom 25 Keyboard/controller (connected via USB to Mac Pro)
MOTU UltraLite (connected via FireWire to Mac Pro)
M-Audio ProjectMix I/O (connected via FireWire to Mac Pro)
I can bring up the Loop Browser and play loops and place loops in the Arrange view but I can't seem to use my USB/MIDI M-Audio Keyboard to generate any Audio via the Motu.
Also, I can see the Midi events in the Logic Transport Window.
If I load up garageband the M-Audio & Motu Ultralite work just fine, so I'm confused as to what I'm not doing right in Logic Pro? It must be something really basic I'm missing.
Sorry for such a basic lame question, but I'm stumped!
Thanks, Rob.

well of course there is no official word on when an update to logic will arrive with a significant GUI overhaul. personally I hope that such a step is taken carefully.. this software is the backbone of many people's working life, so and big changes to the interface are hopefully being considered and integrated carefully.
I'd hope that a major overhaul to the logic UI won't just be cosmetic. there is a lot of legacy code left over from emagic days that do not make use of the latest OSX technology and so are not optimised. an example - look at how slow the screenset changes are. there is always a delay in response time to when you change a screenset, in some cases this can actually be slower than it was on older machines running OS9. as far as I can tell this is because it's all part of some custom graphics code in logic and doesn't make use of OSX quartz and probably not the graphics card effectively either. as a comparison, look at how incredibly responsive exposé is. it always seems to stay that responsive regardless of CPU load, so there has got to be a way to make the GUI features of logic perform just as snappily as the system ones.
same goes for the painful, annoying delay in mouse click response time, which is worse since OSX than it was under os9. a rewrite of logic's UI will hopefully sort this problem out too.
these things may seem like irrelevant nitpicks, but trust me, when you become a power user and you are cutting audio and throwing parts of your arrangement around like nobody's business, the sticky slow response of the GUI really penalises you.

HELP ASAP! no audio output device installed with hp pavilion dv2500

product name: hp pavilion dv2000
model number: dv2710us
product number:2CE75228LJ
windows vista home premium 32bit
my hp keeps telling that have no audio output device installed and theres the the image for volume with a large red circle with a white x in it.
this is not true because i have contexant (i think that's what it is called) speakers installed.
Lately when i would restart my computer the sound would work intermittently but for the past two days whether i restart my computer or not the image for volume with a large red circle with a white x in it is still there and says no audio output device installed. PLEASE HELP!
This question was solved.
View Solution.

Hi, you can try the below steps to resolve the issue :
Step 1 : Re-install audio drivers from HP Recovery Manager.
1. Click Start, in the Start search box, type recovery . Then click Recovery Manager .
2. In the Recovery Manager window that displays, click Next. On the Reinstall software programs that came with your computer screen, click No, I would like to see other options . Then click Next .
3. In the Reinstall hardware drivers screen, click Yes . Then click Next. On the Welcome to Hardware Driver Reinstaller screen, click Next .
4. In the driver list, select the name of the sound adapter installed on the system. Then click Next. When complete, the Reinstallation is complete screen displays. Click Finish to restart the computer. After the computer starts, test for sound. If the issue persists perform step 2.
Step 2 : Re-install audio drivers manually
If there is no sound and the error still displays, update the audio driver from the weblink below :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-63129-1&cc=us&dlc=en&lc=en&...
Step 3 : Restart the Windows Audio Service.
1. Click Start , type services.msc into the search field, and then select services.msc from the list when it becomes available to open the Programs window.
2. Scroll down to and select Windows Audio , right-click to open the drop-down menu, and then click Start .
3. Right-click Windows Audio , click Properties , and then verify that Startup Type is set to Automatic .
Restart the Notebook and check for the issue.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Help Please!! no audio output device installed?

Hi. I have a satellite A215-S4757 last night I installed some windows updats went to bed because it was going to take awhile. When I got it had finished and was in sleep mode. When I turned it on I noticed the sound was on mute. Or I thought it was. When I attempted to turn the sound on I recieved the message "No audio output device installed". I updated BIOs 2.30 but that didnt work. If anyone could help me out I would greatly appreciate it!
Thanks

Try this! Looks like you have Realtek audio. I was having the same problem until I installed the updated Realtek driver directly from Realtek site.
As many users have posted, I was having this problem with my Satellite L505-S5990. I tried most of the suggestions I could find here and on the 'net to no avail. I was surprised to see that this problem affected many laptop brands - even as far back as Windows XP!!
Last week I think I finally found the answer (or at least Realtek did). My laptop has Realtek HD audio, and the drivers that came with laptop seemed to be the culprit. I checked the Realtek site last week, and they have an updated driver, dated 3/30/2010, for Windows 7 as well as other versions of Windows. It is Version 2.46.
I downloaded and installed these drivers, switched back to going into sleep mode rather than hibernate and - so far - the computer wakes from sleep with sound intact!!!
Hopefully these drivers will work for others.

I can't select "audio output stereo" on a track in the arrange window

When I create a new song, in the Arrange window I can
choose "audio output stereo" for a given track, and
access the mixer's output from there. Fab.
When I open a song that I oringally created using Logic 5,
"audio output stereo" does not appear.
Is this something about the file format?
(a) is there something simple to do to enable that for
older songs, or (b) is there a way to convert older song files to LE7?
thanks,
fred, san rafael.
[email protected]

Sorry, je suis un idiot.
FYI. I went into the Environment window and found "Output 1-2"
to be un-checked. Checking it now makes "audio output stero" an available option in that song.
Thanks for listening.
fred

Audio output not working after installing 10.8.2

i have updated my os x lion from 10.8.1 to 10.8.2 but when i have done that my audio output is stop working completely....!! pllease help me to resolve this problem i have macbook late 2008 edesion aluminum..!!

System Preference > Sound > Output > Internal Speakers
Make sure Mute is not enabled.
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Is there a way to connect the Apple TV as a second display without it automatically changing my Mac's audio output?

Is there a way to connect the Apple TV as a second display without it automatically changing my Mac's audio output? I would prefer to use an audio interface for playback and the apple tv as a third display. I know I can go back to system preferences and swap my output back manually, but it is getting to be really inconvienient. Thoughts?

Hi and welcome to Discussions,
have a look at ScreenRecycler http://www.macupdate.com/info.php/id/22908/screenrecycler
Regards
Stefan

How to connect Digital Optical Audio output iMac with Receiver Input

I have connected iMac with onkyo hts-3300 home theater system receiver through optical audio TosLink Cable.( http://www.amazon.com/Digital-Optical-Audio-TosLink-Cable/dp/B001ZU3G2I/ref=sr12?ie=UTF8&qid=1292865309&sr=8-2 ). Unfortunately there is no sound coming out from the Home theater system. I have verified the Receiver optical input is working fine by connecting with my TV optical audio digital out put and the it's working great. The only difference between TV and iMac is, on my TV, it has optical audio digital output and I can use this cable (http://www.amazon.com/Tripp-Lite-A102-02M-Digital-connectors/dp/B0002WPREU/ref=s r11?s=electronics&ie=UTF8&qid=1297320792&sr=1-1) to make it work. I can also verified my optical audio TosLink Cable working because I can see the red light coming out from the cable. So the only problem could be from iMac. I doubt I need to change the additional setting to configure iMac to use external optical audio setting instead of the buit in audio setting. Hoe can I able to do it? or my iMac(IMAC 21.5"/3.06/2X2GB/500GB/9400M-ITP
MB950ZP/A) doesn't support optical digital audio out put? I have follow this thread http://discussions.apple.com/thread.jspa?messageID=12769423&#12769423 and to my surprise which doesn't work out for me. I doubt that i need to change some setting, but when I got to setting>> sound I cannot change any setting. I was quite depressed aldy. Can someone answer my question as i m a newbie here. Thanks a lot

Thank you very much for your reply.
@Király : May i know how to Open Audio Midi Setup? Is this Audio Midi Setup is in the locatated in the Setting in Mac Snow Leapord OS? or how to locate this "Audio Midi Setup " in Mac enviroment. Is it possible to open this Audio Midi Setup in windows 7 enviroment also? I Just want to get the audio from my iMac in Hts-3300 onkyo home theatre. YOur help is much appreciated
@rkaufmann87 : Thank you very much for your sharing about this http://www.apple.com/airportexpress/ connection. for me what i understand is the digital audio output in airportexpress is the same as the audio out put in iMac in terms of details sepcs. So this airportexpress will only help you connect wirelessly to home theatre system, rather than waired connection. Other than that nothig much difference. So there is no point for me to spend extra bucks to attain the wireless connection. Unless the airportexpress have optical digital input, which i believe not. Correct me if I m worng, thanks

My audio output is acting up

Similar Messages

Maybe you are looking for