My audio works everywhere except in my browsers - a little help?
Last week, I noticed that I had suddenly lost audio in YouTube. The video plays fine, just no sound. I verified that the sound bar was up and not muted on YouTube, as well as in my mixer. In fact, I can see the audio modulating in my mixer. It seems as though it's only in my browsers that I have an issue, because my sound tests okay from the Control Panel and I'm able to have audio and video conversations in Skype. I also tried a Google Plus Hangout last night with a friend, and that worked, too. But YouTube, Vimeo and Facebook videos have no audio at all.
I've exhausted so many suggested checks and solutions that I can't even remember how many... easily dozens. The only thing I've found that is odd is that the Openh264 Codec from Cisco was saying "will be updated shortly" until just an hour or so ago (for the last couple of days). But now that it's updated (and still activated), nothing has changed.
I see that a LOT of people have been having this same problem for the last several years. The problems they report (for the few that were able to resolve the issue) differ, but the symptoms seem to be the same. They all seem to stem from some sort of flash configuration issue. I'm semi-literate with software configuration, at best, so I would sure appreciate any help anyone can offer.
Operating system version - Win7 Ultimate, X64, SP1
Web browser and version - Firefox 37.0.1
http://kb2.adobe.com/cps/155/tn_15507.htmlFlash Player version - 17.0.0.169
Right-click on the YouTube video. Does it say About HTML5 or About Flash Player?
If it says About Flash Player, then go to the mixer, open the detailed view to see all the sliders, and make sure that the volume for the Flash Player slider is not muted.
Similar Messages
-
Flash audio works everywhere except on Myspace, where it is extremely choppy
Flash has always worked fine for me on both Myspace and all
other applications, but for some reason for the last two days Flash
has been acting funny on Myspace. When using both the big music
player on band profiles and the mini player that they have on
personal profiles, it will play music for a second or less and then
buffer for a second or less and then play music for a second or
less and then buffer again. If I pause the player for a while and
then hit play it plays the music a little longer (but not much
longer) before going right back into the buffer/play/buffer really
quickly, but I know it's not my Internet connection. It's
definitely not my Internet connection because I've listened to
music on official band websites that use Flash and I've also
watched online television shows that use Flash, and they're all ran
perfectly without any problems. So it must have something to do
specifically with Myspace, but unfortunately I've tried all kinds
of things and none of them have worked. I uninstalled Flash and
reinstalled (making sure to close all my programs before
uninstalling). The only thing that I did in the last few days that
might have caused a problem was to install the desktop version of
the Internet radio from Slacker.com (similar to Last.fm). I don't
think that did anything though, but I uninstalled it anyway just in
case, and nothing changed.
Anyone know why my Flash would be having problems only with
Myspace and no other websites, and why I would all of a sudden have
this problem even though my Flash used to work fine with Myspace?
Any help would be greatly appreciated. Thanks.A quick check on the iTunes Store of a couple of your episodes doesn't show anything unusual - they aren't distorted and aren't at a particularly high level. I don't have an iPhone so I can't check it there, and can only suggest that you ask in the iPhone forum: someone may be willing to download and try an episode just to check whether it's a problem with your particular iPhone.
-
Just purchased an iPhone 4 and it works everywhere except in my house, anyone else with that problem?
The construction materials used could be that of something that dampens the wireless signal.
-
[PHP]simple script, works everywhere except Archlinux
Here is my script. It works everywhere (Debian, Ubuntu, Gentoo, CentOS) except my new Arch distribution.
<?php
$domains_array = array();
$tested_array = array();
$id = "hgEqp";
$queries = array('aaaa','bbbb','cccc');
srand((float)microtime()*1000000);
shuffle($queries);
foreach ($queries as $query) {
$url = 'http://some.url/&query='.$query;
for($i=0;$i<10;$i++) {
$array = unserialize(file_get_contents($url.(1+($i*100))));
$array_result = $array['ResultSet']['Result'];
foreach ($array_result as $a) {
preg_match("[http://(www\..+?)\/(.+?)]", $a['Url'], $preg);
if ($preg[1] != "" && !in_array($preg[1],$tested_array)) {
array_push($tested_array, $preg[1]);
$strona = @file_get_contents("http://".$preg[1]);
if ((strpos($strona, "test string") != FALSE) || (strpos($strona, "test string 2") != FALSE) || (strpos($strona, "test string 3") != FALSE)) {
if ((int)trim(exec('python ./test_page.py -s '.rawurlencode($preg[1]))) != 0) {
array_push($domains_array, $preg[1]);
echo "Domain ".$preg[1]." passed test and added to $domain_array...\n";
sleep(10);
echo "Finished page ".$i." of tested pages...\n";
echo "Finished adding tested pages to array...\n";
print_R($domains_array);
?>
On Arch it isnt throwing any error, but it is doing nothing (and extremly fast, normally it works very long). Somebody knows why it isnt working on Arch?
PS. I have Python installed and fopen allowed in php config
Last edited by Dinth (2009-03-15 18:14:45)Well... putting your file in my Arch web server gives me a but of errors (as expected) but the files is definitely read and processed.
Warning: file_get_contents() [function.file-get-contents]: URL file-access is disabled in the server configuration in /home/ralvez/public_html/testing.php on line 18
Warning: file_get_contents(http://humber.ca/&query=bbbb1) [function.file-get-contents]: failed to open stream: no suitable wrapper could be found in /home/ralvez/public_html/testing.php on line 18
Warning: Invalid argument supplied for foreach() in /home/ralvez/public_html/testing.php on line 20
Finished page 0 of tested pages...
Warning: file_get_contents() [function.file-get-contents]: URL file-access is disabled in the server configuration in /home/ralvez/public_html/testing.php on line 18
Try using /var/logs/httpd/error_log and /var/log/everything.log to find what's wrong with the file in your system.
R. -
How do I get composite av cable to work on iPhone? Audio works, no video. Thank you for any help
did you choose the correct input source ?
I have to choose composite for my tv to show anything
also the iphone 4 dont support mirror so it will only display
picture when in supported apps like apples video app and youtube and the likes -
Airport Express Works Everywhere Except One Place
I have several rooms in my house with their own stereos, and my new Airport Express works on all of them. However, I have one stereo outside, in the garage and the Airport Express does not work out there. I assume that the wireless signal doesn't reach there. Is there a way to boost the wireless signal? The garage stereo is probably about 50 feet from the wireless modem, which is in the basement of my house. This is probably a dumb question, but I don't know anything!
Soonerfunk, Welcome to the discussion area!
If the wireless signal were created by an AirPort Express (AX), an AirPort Extreme base station (AEBS), or a Time Capsule it would be possible. However it is not possible when the wireless network is created by a wireless modem. -
i RECENTLY GOT THE IPHONE FOUR EVERYONE IN MY HOMEM THAT CAN USE WI FI IT WORKS ACCEPT ON MY PHONE.I GO SOME WHERE ELSE AND IT WORKS THE ONLY PLACD THE WI FI ON MY PHONE DOESNT WORK IS AT MY HOUSE HOW DO I CONNECT TO WI FI ??????????
Tracy, first you should restart the iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo. This process could solve some of your problems. Also make sure you have the latest update, go into our settings>general>software update. On the wifi issue try restarting your router, if you are still having problems try resetting your network settings, go into your settings>general>reset then tap reset network settings.
The battery issues seems normal, the battery will not last 24 hours. -
Why does my apple ID password work everywhere except iTunes and the App Store?
I need help guys my App Store and iTunes are not accepting my apple I'd password, but it works online? Does anyone know what to do
It's not meant to be an answer, it's meant to be a suggestion.
You'll notice I said, "Try"...
You can use the email form here > Apple - Support - Mac App Store - Contact Support
Maybe Apple can help you directly. -
My MacBook works fine wifi everywhere except for home. The home wifi is fine with the iPad and iPhone, so I assume the issue is with my computer. My computer works fine on wifi networks elsewhere. The only problem is at home.
The computer "connects to the wifi," but browsers and other internet-dependent software do not work. Curiously, if I connect the ethernet cord that doesn't work either. Usually if I reset the modem to factory settings twice (for some reason, once doesn't do the trick), my computer will fully connect to the wifi. However, in a few days, it goes back to not working.
Today, resetting the modem didn't work. I could only get wifi connection while in safe mode, but not in normal mode. So, the issue seems to be software not hardware. I have tried starting new accounts in normal mode, but those also don't connect properly to internet.
Not sure if this is relevant, but this problem started when my building switched internet providers from ComHem to Telia (I live in Sweden).
What do you recommend I do?
Thanks!
PS I use Snow Leopard: OS 10.6.8Not unless the modem is causing a problem.
What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect. -
In 5.0.2 Lollipop update equalizer & clear audio+ doesn't work anymore (except in walkman). In 4.4.4 equalizer works without problem! Sony please fix, because I can't listen other content without adjusted equalizer.
xperia tablet Z2 wifiSolution by Rickard
"I have got some more information about this and it's up to the app if the equalizer is used or not. It's not on by default for all apps, the developer of an app must state that they want to use it in their code."
Android team turn this features off in default. Pffff why?? ))
And now we have to wait that all application developers have added this feature, Facepalm. -
Hi,
You can visit http://brandy.pararuk.com and see just 15 flying comets animated with KineticJS library.
When I run it (viewing Windows Task Manager) I see that firefox.exe consumes 100Mb of memory every second up to full avaliable memory and hangs on Windows.
I've tested this page also on desktop with: Chrome, Safari, IE9 and on my Android tablet with: Firefox Beta, Chrome and Android browser - page works good everywhere, except of desktop Firefox.
Thank you for help.Did you try to disable extensions like Firebug?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
My newly installed burner works fine from i-tunes, except the burned disk won't work in my car CD player. The old burner's work just fine in the car. Please help.
Using my new G5 I have the same problem, which I did not know using my old G4 with an external LaCie burner. The CD-Changer in my car is not able to read audio-cds, also my cd-player in my home hifi-system. The only way to play these audio-cds is (strange...) to put them directly in the main tuner of my car (usually used for the navigation cd), not using the Changer.
Maybe the problem really depends on the quality of the CD-Rs. I have used CD-Rs from Sony (it´s a brand, I think?) and will try Verbatim.
Regards, Horst -
I can't play videos (you tube for example) except in full screen mode. The audio works in either, but the video doesn't load or run in the normal you tube web site.
Any help would be greatly appreciated.
Thanks
Also, the error console shows all sorts of different errors. Though, alot of error parsing values.Do you have any Mail plug-ins? In particular, do you
have any plug-ins installed on one computer but not
the other? In the Finder, go to each of the following
folders (if they exist). What do you see there?
/Library/InputManagers/
Not Found
/Library/Mail/Bundles/
Not Found
~/Library/InputManagers/
Smart Crash Reports Folder / Smart CrashReports.bundle
~/Library/Mail/Bundles/
MailRecent.mailbundle
> I have a number of Mail Rules in
place which place messages
of certain topics in specific Smart
Mailboxes
This doesn’t make sense to me. You cannot tell a rule
to move messages to a smart mailbox, only to a normal
mailbox. Each smart mailbox has its own set of
conditions that messages must satisfy in order for
them to appear there.
OK. I misstated this. I have a number of Smart Mailboxes with their specific rules in which to route certain topics to specify mailboxes. I am trying to not have to create each Smart Mailbox on each computer.
The problem is that when I am on the road I add contacts, bookmarks, keychain items, contacts into my laptop and vice versa when home. I would just like to have those Sync on both computers. Seems like it should be easy, but it hasn't been.
I really don't think I have anything "non-standard." A few Smart Mailboxes, a couple of signatures, thats pretty much it.
Note: For those not
familiarized with the ~/ notation, it refers
to the user’s home folder. You can easily locate any
of the folders referred to in this post by copying
the folder path here, doing Go > Go to Folder
in the Finder, and pasting the folder path
there. -
I Just installed Win 8.1 Using EFI boot , and seperately downloaded apple support software ( Bootcamp 5.0.5033) . Now everything works fine except the Audio . there is no audio . i tried updating the drivers . but no use . I have posted the picture of my errors please HELP ME OUT!
i have this problem, new Boot Camp Support Software 5.1.5621, no audio. Help, plz....
-
hi, all
As my experiences with Solaris grow, I find it even more attractive than the first glance. I installed Solaris -10 2 months agao, and everything works perfectly fine on my laptop except that i got no audio. the small icon on the system tray says no audio controller---big pain for me.
i have tried the OSS but it still doesn't work.
my soundcard is an on-board one, the manufacture is SigmalTel, the OSS installation programe can detect Intel ICH and its website says this kind of device should be supported. The laptop I am using is ASUS N1000, I do hope i can get over this and use the solaris on a daily basis. (no sound is definitely not a good choice for whoever spend more than 3 hours before the screen).
So is there anyway I can get sound for my Solaris?
Could someone give their suggestion to get audio work?
many thanks!The prtconf -pv output is as follows:
Does this mean I have to use 24c5, 1713 as XXXX in the command:
update_drv -a -i "pci8086,XXXX" audio810
I simply don't know how to utilize information found here to do something with the driver
Node 0x1f62b0
assigned-addresses: 8100fd10.00000000.0000e000.00000000.00000100.8100fd14.00000000.0000e100.00000000.00000040.8200fd18.00000000.00000000.00000000.00000200.8200fd1c.00000000.00000000.00000000.00000100
class-code: 00040100
compatible: 'pci8086,24c5.1043.1713.3' + 'pci8086,24c5.1043.1713' + 'pci1043,1713' + 'pci8086,24c5.3' + 'pci8086,24c5' + 'pciclass,040100' + 'pciclass,0401'
device-id: 000024c5
devsel-speed: 00000001
fast-back-to-back:
interrupts: 00000002
max-latency: 00000000
min-grant: 00000000
model: 'PCI: 8086,24c5.1043.1713.3 - Audio device'
name: 'pci1043,1713'
power-consumption: 00000001.00000001
reg: 0000fd00.00000000.00000000.00000000.00000000.0100fd10.00000000.00000000.00000000.00000100.0100fd14.00000000.00000000.00000000.00000040.0200fd18.00000000.00000000.00000000.00000200.0200fd1c.00000000.00000000.00000000.00000100
revision-id: 00000003
slot: 00000000
subsystem-id: 00001713
subsystem-vendor-id: 00001043
unit-address: '1f,5'
vendor-id: 00008086
Maybe you are looking for
-
the old version of itunes had a drop down box listing songs that did not sync newer version does not how can i see what songs did not sync, The box message on the screen says 19 items did not sync to your ipad, see itunes for more information. Wher
-
How to import Gmail contacts on a blackberry curve ?
I have a problem ! I have all my contacts on my Gmail account. How can I import them on my BB curve contacts ? Thank you for your help !
-
Reminder for Action Closure Date Overdue (5 Days)
Hi guys, I have 3 columns: Action Start Date, Planned Closure Date & Real Closure Date in my application called Employee Actions Manager developed by using VB.Net2010 & MS Access 2010. I want to set a reminder that can remind me on 5th day after the
-
Configuration in Materials Management postings
Dear All, I am going to configure the Automatic Posting procedure of Materials Management postings via transaction OBCY. Can I ask if I can provide same accout assignment in Inventory posting (BSX) and Cost (price) differences (PRD)? I have provide a
-
Leave to list processing and retun to scren 100
Once output is generated in the list i want back to main screen . How i will prceed regards jithen