My Audition 3 won't start in Win 7 64. Help needed...

When I try to use Audition 3, I get this error message:
An error has been detected with a required application library and the product cannot continue. Please reinstall the application.
I have reinstalled, but I still get the same error message.
Could anyone give me any idea what to do to fix this error? Thanksamillion!

ck, did you search threads in the forum?  Results with 64-bit Win7 have been mixed as reported in this forum.  Some people have had no issues; others have had trouble, but you might glean some ideas from other users' struggles.  (Try searching: Windows 7 64).
Please come back and let us know how it plays out for you, because many including me (who has only used it in 32-bit Win7, successfully) are curious about how well this works.
They really need to do an Audition 4 optimized for both versions of Win7, as Audition 3 has been around since before Vista, but there are some signs that Adobe's interest has waned and it's unclear whether there will or won't be an Audition 4 from Adobe.

Similar Messages

  • 11g DB Control service won't start on Win XP Pro

    Hi all,
    In installing my 11g database, the DB Control service won't start so the database config fails prior to doing the EM stuff. The system event viewer says:
    The OracleDBConsoleorcl11p1 service terminated with service-specific error 2 (0x2).
    Querying further, I find the following:
    SERVICE_NAME: OracleDBConsoleorcl11p1
    TYPE : 10 WIN32_OWN_PROCESS
    STATE : 1 STOPPED
    (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
    WIN32_EXIT_CODE : 1066 (0x42a)
    SERVICE_EXIT_CODE : 2 (0x2)
    CHECKPOINT : 0x0
    WAIT_HINT : 0x0
    Researching the error code 1066 simply says it is a vendor-specific error code. Anyone out there ever come across such a thing?
    Cheers,
    Jim Greetham

    Jim,
    Were you able to figure out the problem why you were getting 'service specific error occurred:2'?
    I have the same issue.
    DB version: 11.1.0.6.0
    OS: Win XP (latest patches and updates applied)
    The database and other pieces are working just fine.
    Thank you,
    Taj

  • Illustrator CS4 won't start in Win 7

    The scenario:
    - Brand new Win 7 machine; brand new CS4 Web Premium purchase
    - All windows updates and Adobe updates performed
    - All Adobe products start up fine, Illustrator doesn't; it just hangs; I don't even get the splash screens at all to tell me that it is even attempting to load something. The computer freezes; ctrl+alt+del will freeze as well. The only way to get out of it is to power off the computer with the power button
    ** This only happens with Illustrator, all other products/apps work fine***
    Any ideas? Similar situations? Recommendations?
    Thanks,
    Mitch

    Not a bothersome question but I think it is a problem that has been posted elsewhere on the web.
    you can try this as wll.
    Quoted from Mylenium in a similar thread.
    Check +C:\Users\[You]\AppData\Roaming\Adobe\Adobe Illustrator CS4 Settings\+. Delete/ Move the folder to some otehr location and have AI re-create all user settings. If that doesn't help, you may have a permissions problem somewhere.
    Might work for you.
    there might be a fix on the Microsoft site I believe a patch.

  • Itunes won't start after Win 7 wakes up

    I've noticed a lot of Win 7 users not able to launch iTunes or it takes many minutes. I found by accident that it only happens after my Win 7 PC has been in sleep mode. If I re-boot my PC it starts almost instantly? Anyone found an answer to this? In the mean time I'm just turning power saving off.

    I have now found that the problem relates to a USB hard drive which I disconnected a while ago. after re-connecting it iTunes works fine. I am guessing that iTunes was searching for files on the missing drive? anyway I hope this may help someone else.

  • Quicktime won't start on Win XP

    All,
    I had a working version of Quicktime and iTunes on my XP, and everything worked until I recently wanted to start iTunes, and noticed it did show up as a process for 2 seconds but then disappeared silently. The same goes for Quicktime; I can't start it anymore.
    Since it is on my work's PC, I can't just reinstall Windows to fix the problem...
    I already rebooted, uninstalled and reinstalled all related software, but no gain...
    Any way to check what is conflicting or missing?
    Tx!
    ps: In the old Amiga days there was a program called "Snoopdos" to check all routines, libraries and executables easily. Those were the days...

    until I recently wanted to start iTunes, and noticed it did show up as a process for 2 seconds but then disappeared silently. The same goes for Quicktime; I can't start it anymore.
    That sounds a bit like a Qoologic adware infection. (Rare nowadays, but outrageously common a few years back.)
    We used to use Ewido to fix that, but Ewido doesn't exist anymore. (Bought out by AVG who folded it into their own products.)
    Try downloading and installing the free trial version of Malwarebytes. Update the Malwarebytes definitions and run a scan of the PC.
    http://www.malwarebytes.org/
    Does the Malwarebytes scan pick up any infections? If so, what does it call them?
    If it repairs errors do iTunes and QuickTime start launching again?

  • CS4 Indesign won't start up (WIN)

    Suddenly I cannot get Indesign to open properly. I get the splash nad it opens three panels (swatches, layers, essentials) but will do nothing else. I get the same results whether I try to open the program from an Indesign icon, from the WIndows start menu, or by clicking on an Indesign file. Everything worked fine last night. I have restarted the computer, but I get the same problem. Illustrator and Photoshop work normally. I'm running CS4 for Windows. Any suggestions?

    Two -- system restore and
    Replace Your Preferences

  • Itune 10.5 won't start on win 7 64bit after agreement page

    Anybody same situation? Apple should really pay attention to the problem!

    HI Paul,
    no sorry, did not manage to get it running. Hopefully someone from Adobe could have a look at the installation logs.
    -- Andi

  • Oracle 10g Database Setup Won't Start on Win XP Pro

    I am new to Oracle and have just downloaded the 10g database from the Oracle website and am trying to install it on my Windows XP Professional Machine. When I double click "setup.exe" the hourglass timer appears very briefly but then nothing happens. Does anyone know why this would be? Thanks.

    Try using the setup.exe in the install folder instead. If that doesn't work, verify that your download was ok (you should be able to verify the size of the downloaded file with that on the download page of OTN) and also verify that your hardware meets the minimum requirements for installation (see documentation in your doc folder).

  • 5800 XM won't start up any more, please help!

    Dear anyone,
    I have a brand new 5800 XpressMusic which, after only a few days, won't boot up any more.
     I heard a couple of beeps and when I was at my phone, it was already blacked out and wouldn't start up any more. Even after hanging on the battery charger for over 4 hours, it won't get back to life. I have tried everything I know about Nokia's but no reaction so far. Please help me!!!
    Message Edited by dropp_it on 17-Feb-2009 03:18 PM
    Solved!
    Go to Solution.

    Hold down, green, red and camera key and press power button and keep holding those three buttons all the time.
    Teo
    Get more guides and advice at:
    www.symbian-freak.com
    Symbian Freak introduces various resource for symbian users like:
    Latest news, Error Fixes, Modding, Tutorials, and of course a detailed forum with professional support for every single user.
    To get more out of your favourite device, visit the website.

  • MacBook Won't Start Up!!  Please Help!

    Hi all,
    I have a Aluminium MacBook which I purchased online at Apple, I have had the MacBook about 2 months, all was working ok until last night when I went to start it and it wouldn't get past the grey Apple screen...
    This morning I tried it, it did boot up but took AGESSSSSS I do have AppleCare but wanted to see if I could do anything before calling them?
    Feel really dissapointed, especially as I have a old Emac which I've never had any grief with grrrrrr...
    Any help/suggestions would be greatly appreciated, but simple terms only, I have VERY limited knowledge
    Thanks in advance,
    Amy

    Hi all,
    Right, I've not got any further with my problem, after seeking advice on here I went home rung AppleCare who suggested what you guys did and with the install dvd in the machine I went into Disk Utilitys and 'repaired disk' It completed successfully and said 'The Macintosh HD appears to be ok'
    So I was told to restart, which again took about 20 mins booting from the dvd. So I was then advised to 'erase disk' which I did.
    I was then told I would need to reinstall Mac OSX again from the dvd which I did but got a message reading something like 'checking dvd for consistancy' There was a 'skip' option but I thought I'd let it go through it's motions which painfully took about an hour. Then clicked 'install' only for it some moments later saying 'install failed'
    I got the following message:
    *The installer could not make the computer start up from the volume 'Untitled' you may need to select your disk using the startup Disk Utility. Restart to try installing again.*
    That's as far as I got, as I'm not confident enough to try anything else without getting advice on here or calling AppleCare but by this time had closed. They said its either a software or hardware problem and that was part of the elimination process, so I'm guessing this looks like a hardware issue would I be right in thinking that?
    If so, where do I stand with getting the MacBook replaced as its under 2 months old...
    Please advise, I'm clueless here
    Thanks in advance
    Amy

  • Mac Pro won't boot to disk array after Mac OS 10.6.8 combo update. Array two partition are there, just won't start off them anymore. Help, please

    My 2009 Mac Pro with Highpoint RocketRAID 3522 would no longer boot of the disk array as it had before. Boots off internal HD (still running 10.6.2), sees the array in the Finder, both volumes there pass Disk Utility Repair Disk tests, they show up in System Preferences - Startup Disk. TechTool Pro 5.0.7 sees nothing wrong with the primary boot partition. (didn't try the clone still with 10.6.7) **** frustrating. Tried reinstalling latest firmware for card. Nothing reported by the drives in way of any failure. zapped the PRAM, tried booting with option key, it doesn't show the array but two copies of the internal HD. Running out of ideas. Any out there?

    I am having the same problem with my HPT 4321.  After upgrade, wont boot.  Shows up everyone as bootable disk (even when holding option at startup) but Mac will not boot off it.  I installed a fresh 10.6.8 copy onto a usb drive and HPT drivers work so might just be something to do with the main drive being bootable.  To complicate things, the Snow Leopard DVD doesn't have the drivers to see the array so cannot use it for troubleshooting.  It will not start in safe mode. Downloaded combo updater to try and re-update but it doesn't let you install it on another drive.  HPT driver installer doesn't allow you to install on another drive so also can't re-install driver.  Only choice seems to be install OS on new disk and recreate everything from scratch, then SuperDuper back to HPT drives and hope that it was a corruption during the update but not sure that it will boot even after all that work. 
    Anyone have a working computer with 10.6.8 and booting off a Highpoint RAID card?

  • Keynote kept crashing.  Won't start from the beginning.  Help!

    The keynote kept crashing.  I went to the website just now, but when I try to watch, I can't get back to the beginning, which I missed.  The only options are "watch live" and "start from pause," and neither of those is what I need to do.

    As we can't see what your doing, provide some details,  what website is this, did you create the file, is it a Keynote or Quicklime or PDF file?

  • Render Queue in AME won't start, tried everything and the client needs the footage! Can anyone Help?

    Hi,
    I am exporting a quicktime file H.264 at 720p but cant seem to render the video.  I have read through heaps of forums and have tried the following:
    -Added black video (from premiere) to the video track 1 for entire length of work bar.
    - ticked use preview files. and rendered all video, audio and effects before exporting.
    - un-ticked include xmp
    - tried exporting without audio.
    - tried only a few seconds of footage
    - tried adding a single opacity keyframe to the first frame of the sequence
    - played around with the quality of the clips.
    - I've even tried making a new project with just a 10 second clip.
    Each time After about 10 minutes of waiting I finally get an error msg as below:
    - Source File: /Users/StudioB/Library/Caches/TemporaryItems/Untitled.prproj
    - Output File: /Users/StudioB/Desktop/Sequence 03.mov
    - Preset Used: Custom
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 07:13:59
    Mon Mar 22 18:29:58 2010 : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    I haven't moved any files and haven't had a problem with rendering the sequence in premiere. but i have had multiple crashes when altering audio
    track properties (adding compressors etc.)
    The project file and media was originally copied from CS3 on quad core pc (win xp) and is now running on Mac Pro Dual quad OS X CS4 version 4.0.0
    I am really stuck for a solution.  Can anyone offer a suggestion?

    Please try to trash your prefs and clear your media cache as well.
    http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html

  • HELP !  iMac G5 won't start up!!!  HELP!

    I have a iMac G5 OSX 10.4.6 I recently bought an 320gb western digital external hard drive. I wanted to back up my iMac hard drive, so I installed superdrive software. I backed up my computer with no problem. I shut my computer down and left for work. When I returned a few hours later, my computer will not boot up. I've tried unpluging all the power cords, including the one from the wall. No start up. I unpluged again and this time I press apple key contol key and P and R keys. Sttill nothing. My computer is making a funny noice when I try to power up. It's like it struggling to power up, a tick noise. Is there any advice anyone can give me?

    I'm sorry Evan1, but advertising is not permitted here. You may include an html link to a service, if the link is directly germaine to resolution of the specific issue concerned, but if you do so you also have to post a disclaimer, indicating that you may make financial gain as a result.
    The terms and conditions of use specifically state:
    No advertising. Don't use the Site to sell or market your products to users. If you receive compensation or personal benefit from a purchase or site you advocate, or from an affiliate link, you must note this in your Submission by stating, "I may receive some form of compensation, financial or otherwise, from my recommendation or link." Advertisements for items that do not directly answer another user's question are not allowed. As well, the following are not allowed:
    A Submission created solely to advertise a book, service, software or some other item for sale.
    Any reference, including a link, to a commercial item that is not directly related to a relevant technical support question or answer. For example: "This post created by Super Post Creator."
    THis is a mutual assistance discussion forum, not an opportunity to sell your services.
    Rod

  • My Macbook won't start up...Please help!

    My Macbook powers on but doesn't go past the grey screen with the apple. The gear thing keeps turning but it doesn't start up. What can I do? I'm a bit technology challenged but I want to try everything before I take it in. I'm scared of losing all my information. I'd appreciate any suggestions you guys can give me.

    Greg's suggestion is what you need to do. I will only add that you should repair the hard drive before attempting the Archive and Install. See the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Maybe you are looking for