My auto-Lock will not engage draining battery what can I do, I reset 2X
IMac 24 Mac OS X (10.4.10)
I don't understand. What are you calling an auto lock? The switch at the top right hand of the iphone?
Similar Messages
-
I have an iphone 5c and I left the office to reach 0 percent and now when I put it in charge of a battery icon appears red and under a usb cable and will not turn ... what can I do ?
Read this
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
and ensure you plug it into a wall socket to recharge -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
My IPhone 4s will not connect to wifi, what can I do?
My IPhone 4s will not connect to wifi, what can I do?i have tried network reset, turning wifi off and on but my phone will not connect to any network.
Hi jazznola9,
Welcome to the Apple Support Communities!
There are several steps you can take when troubleshooting Wi-Fi connectivity on an iPhone and it sounds like you have already done a few of them already. In your situation I would recommend reading over and working through the steps listed in the attached article.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Have a great day,
Joe -
I just bought and downloaded an embroidery file but Adobe Reader will not open it. What can I do?
I just bought and downloaded an embroidery file but Adobe Reader will not open it. What can I do?
Is it actually a PDF file or something else.
You haven't given us enough information to do anything other than throw random guesses your way.
Version of Reader? File type? Downloaded and saved to your desktop or are you clicking a link?
Opening in browser or using File>Open in Reader?
More info is better. -
My 24" iMac just died and will not power-up. What can I do?
My 24" iMac just died and will not power-up. What can I do?
Bring it into an Apple Store for a free diagnosis and quote for cost of repair/replacement of parts.
If the costs are $500 or over, consider using the money toward a new or "newer" (used) Mac. -
I open Adobe Acrobat X Pro and it open but shut right down and now it will not open at all what can I do to correct the issue?
Hi shortydm1964,
Please follow the steps given below:
1.Delete all the files from following folders:
2.C:\ProgramData\Adobe\SLStore
3. C:\Program Files (x86)\Common Files\Adobe\SLCache
4. And, delete all files from following folder except cache.db
5. C:\Program Files (x86)\Common Files\Adobe\ Adobe PCD
Now, launch the product and activate again with a new serial number.
I hope this would resolve your issue.
Regards,
Anubha -
After downloading ios 7.0.2, my ipad will not charge completely. What can I do to fix?
After downloading ios 7.0.2, my ipad will not charge completely. What can I do to fix?
I've the same problem after installed iOS7.0.2, my ipad3 just couldn't charge to 100% when pluging on my desktop, so I have to use wall plug for full charge. I am sick of iOS 7 and wish I didn't upgrade it.
-
my imessage randomly shut off and will not activate now.. what can i do ?
Check this link
iphone 4 - tried to update to 6.1.2 and phone wont turn on now -
HT3529 My imessage will not send pictures. What can i do? Help!
My imessage will not send pictures. What can i do?
Perhaps some more detail on how you have Messages set up would help in diagnosing your problem?
My response was simply to tell you that iMessage does work with photos in iOS 6.
There could be a transient problem with the iMessage servers which is causing your problem. -
I have an iPhone 4, the flash will not turn off. What can i do? Flash is already off on camera and i deleted the flashligth app.
Try Hard Reset -> Hold down these two buttons at the same time [Sleep/Wake & Home] the moment you see the Apple Logo 'release those buttons' allow device to reset
If still no resolution -
Restore
[back up information either via iTunes or iCloud if no recent one has been done]
Erase All Content an Settings - FIRST Set up As New - Test Camera Flash
Works? Great! - restore back up
[NOTE - if the flash does not respond again after restoring back up then sorry will have to Erase All Content and Settings Again and then the best part 'Set up As New and manually enter data/information']
If the first time done and after setting up as new and still not resolved - then Id suggest call AppleCare Support or set an appointment up with an Apple Retail Store
Best of luck -
have an apple TV 1st generation - it froze downloading a trailer and had to be unplugged. Since then I cannot access the apple tv menu. When I run diagnostics it says it is operating properly but will not factory restore. What can I try?
Apologies, I was looking at the wrong schematic for the Apple TV 1. There isn't a button. So lets try this instead...
Remove the power cord and wait 20 seconds.
Plug it back in and let it boot (Give it 10 minutes, it's being tempremental)
Try and navigate to the the advanced menu and do a factory restore
If that doesn't work then if you are using the white remote hold down the menu button for six seconds and release this should bring up a hidden menu which will allow you to access the advanced configuration settings.
Again, if this fails there isn't much to do than tap it with a hammer to see if that fixes it (hard to believe how many times that actually works. (No responsibility taken if it breaks!, but at least you'd have a good reason to buy Apple TV 3) -
No permissions repair trouble the whole time I had my new MacBook Pro. Now, I get this message (after a ton of necesary repairs:
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
What does this mean, and what can i do?I see the same thing but it does not appear to be a problem. Some discussion in:
https://discussions.apple.com/message/15688567#15688567
I'm actually seeing a lot fewer permission repairs than I used to see (and they didn't seem to cause problems either ). Hope that helps! -
My daughter was playing on her Ipod Touch when the screen went white. It will not turn off or do anything. Has anyone else had this problem and know what may work?
The same thing just happened to my new ipod today while i was trying to use an app. A lot of people say that it is caused by an ios update, but I let the battery on my ipod drain until it turned off. Once i charged it, it turned on and is working normally again
-
Hey guys!! Well i left my ipod outside for like 5 min. In the sun but then i went to get it and it said that the tempeture was too hot so i left it cool off for a minute. Then i turned it on and it was working fine but it ran out of battery and it turned off. I went to put it to charge and it said it was charging so i waited for it to turn on by itself but it never did. It just kept saying low battery charging. I left it to charge ALL night and when i woke up it still said low battery charging!! What can i do to fix this someone please help!!! Reseting it work, ? And how to reset?? THANKS!!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Error while posting a document using the BAPI_GOODSMVT_CREATE
Hi, i was trying to post the Goods Receipt document ( Tcode MB1C) using the bapi BAPI_GOODSMVT_CREATE i am passing the item details and Serial number details. the error triggered was Maintain Serial Numbers for Total Quantity but i am passing the qu
-
Dynamic reverse context node mapping at runtime
Hi! I have an application which uses another embedded component containing a ALV table which shows the data of a transparent table. Everything works fine if i'm working with a static table with static attributes and map the context node of the applic
-
Constant Resolving Host Issues
I have had a good service until recently but now Constant Resolving Host Issues. Pages slow to load making it difficult to use. HH3 Software version 4.7.5.1.83.8.94.1.37 (Type A) I have factory reset hub and tried opendns and Google DNS. Can anyon
-
How to select a movie with the Apple Remote on Mountain Lion?
I asked the Apple store's live chat if on new computers without Front Row and if I get the remote whether I would still be able to select a movie and play it from iTunes with the remote. They said yes. So I pose the question here: How? When I try the
-
Out of the blue, muse stopped displaying the handle guides. I can't get them back, and this is not the case on my home mac. I can't even find a way to re-install from the Creative Cloud app without manually deleting Muse. Please help.