My babies have been within driving distance for 3 days now, what gives?

I drive by the Fort Worth UPS hub practically everyday and the warehouse in Dallas, TX isn't that far either.
I ordered a X61T and a X61s, my UPS tracking number: 1Z V62 92V D3 5315 878 4 shows that they are in Dallas Texas and have been since Sunday; why aren't they at my house?
Called UPS, they told me to call Lenovo and get a tracer started on the package. Called Lenovo, they told me to wait until tomorrow, then to call again if I don't have my package yet.
Poor little guys came all the way on an airplane from China, yet they can't make the 20 mile hike to my place.
I leave for CES on Monday then straight to Finland next Friday.
What am I to do?
stefan at intomobile dot com
edit: written on a T61 in bed as my mother uses her X40 to prepare Romanian recipes for the 4 full days left I have at her house. the X61T is for me, the X61s is for my girlfriend, who has a T40 now. there is a T23 sitting on a coffee table used for when friends want to fact check during our heated debates or just check up on random internet information. we're a very happy thinkpad house :-)
update (19:42 Dallas, TX): tracking now says the package left dallas, oh joy! it really might be coming tomorrow!
update: got it today, early too, before noon!
Message Edited by Constantine on 01-04-2008 02:26 AM

Sounds like it is hung up on restoring your pictures.  At this point it is unlikely to finish.  All you could do is try again, by tapping Stop Restoring, then erasing the phone and restoring the backup again.  If you do, make sure it is connected to wifi and your charger, and that it is located near your wifi router to get a strong, consistent signal.

Similar Messages

  • HT4060 Hi, i have been charging my ipad for 4 days now yet the power stays the same at 5%. They ipad shows the charging flash yet seems not to be charging. Can anyone please help?

    Hi, i have been having problems charging my ipad3 for some time now (very slow). The power is now down to 5% and i have been charging it for 4 days now without any movement. The charging flash is showing yet does not seem to be charging. Please can anyone help.

    Are you trying to charge it plugged into the wall with its supplied power brick? It's best charged that way.
    You can try to swap out the power brick and cable to either rule those out or rule them in as the issue.
    You can also try giving your iPad a reset. Hold down the sleep and home keys until you see the silver apple. Let it reboot and try again.

  • I have purchased Adobe CC and have been paying $9.99 for two months now, but all of the sudden today I tried to open it and it is saying that my 30 day trial has expired

    I have purchased Adobe CC and have been paying $9.99 for two months now, but all of the sudden today I tried to open it and it is saying that my 30 day trial has expired and will not let me access it.

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • I have been using iphone 4 for 3 months now. today suddently stopped working.

    i have been using iphone 4 for 3 months now. suddenly stopped working

    Does the phone still charge when you use the wall adapter?
    If yes, charge it for about 10 min, then try to do a reset by holding the sleep and home button until the Apple logo comes back again.
    If this does not work, try to connect to your computer in recovery mode, explained here: iPhone and iPod touch: Unable to restore

  • I have had my Apple TV for 3 days now and the movie I wanted to rent still hasn't loaded. What am I doing wrong?

    I have had my Apple TV for 3 days now and the movie I wanted to rent still hasn't loaded. What am I doing wrong? The movie is only 1hr 33min but says it'll take over 4hrs to load.

    AppleTV rentals are fixed size, and don't degrade quality if the connection is slow.
    Minimum suggested requirements for 'instant' streaming are:
    SD          2.5Mbps
    720p HD  6 Mbps
    1080pHD  8 Mbps
    Any slower for the content quality selected (Settings iTunes store) and AppleTV has to partially download the movie in order to play through without rebuffering, and that can take anything from minutes to hours depending on internet speed and actual 'file size'.
    The problem you see is usually related to slow intermet (very slow LAN connection from your router is rarely an issue but could be if AppleTV is not getting good signal).
    On a computer use speedtest.net to test your internet speed.
    When I has a 1 Mbs it would take 8-10 hours to download an SD title.
    With 4.5 Mbps it take 15-30 minutes to play 720p movies, longer for 1080p.
    A big flaw with AppleTV for those with slow connections is the limited hardware and memory - if you get bored waiting for the movie to start and use AppleTV say for YouTube. streaming from your computer iTunes or merely browsing the store trailers this can be enough to delete the portion of a rental already downloaded forcing it to restart each time you use it for something else.
    If you turn out to have slow internet an alternative is to rent in iTunes on your computer, then once fully downloaded you can play on AppleTV under Computer>your iTunes>Rentals (only appears when a rental is on the  computer ready to play).  Alternatively lower rental quality settings from 1080p>720p>SD in future if you need faster starts.
    I have also seen issues recently on some of my units where it starts downloading well, but for some reason freezes and refuses to fetch the rest unless I play from the start - this is usually after I've played and paused a rental a few minutes in and I've confirmed it just stops fetching more data sporadically - it never used to do this.
    AC

  • Waiting! Have been at this point for 24 hours now

    I have been trying to install for last 24 hours ... get "waiting" message.

    You posted in the Tiger 10.4 discussion forum. What are you trying to install? What are you using to install? Need more info.
     Cheers, Tom

  • HT1918 I keep get an email saying that I am trying to reset my password when I haven't tried been getting this message for 3 days now and I been getting 4 a day for the 3 days

    I keep get emails sent to me saying that I am requesting to change my password when I haven't they been sending it to me for 3 days now and been getting a few a day about it.

    Doesn't strike me as a "high traffic" issue, if you pause the download can you open the /Applications/ folder on your Mac and see if the installer already present? If you can stop the download and delete the installer (because it is not finished), the try again?
    If you've already done the above have you tried using Disk Utility First Aid from your Recovery HD?
    Try to verify/repair the disk and see if that takes care of it. (Of course make sure you have a good, recent backup before trying this.)
    If you're still having issues: re-install OS X from the Recovery HD, install all available software updates, try again.

  • I have been using my printer for APPS and now it wont print documents and ordinary printing

    Could you tell me why my photosmart all in one printer will not print normal documents and files from my pc or other device I have just been usong the apps on it to try out but now will not print out anything else like normal things from my computer or ipod or iphone.

    Hi, sandie18.
    Does your iPhone say "No AirPrint Printers Found?"  If you check the printer's status on your computer, is it offline?
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided.
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Mountain Lion - Apple I have been downloading mountain lion for 5 hours now, and its still not processing! This is not good please sort out!

    Ok, I'm now getting really annoyed with downloading Mountain Lion. I left my Mac Book Pro - 6 month old in download mode all night and nothing! I have started again and in 5 hours about 5%!
    What is going on - Apple is this good customer service?

    It could be your Internet connection and not the Apple servers. I downloaded it again (although I already had the GM developer version) over a very slow Internet connection and it took about 3 1/2 hours. You can always pause and then resume the download - Lauchpad will let you know how your download is proceeding.
    Clinton

  • My ipod touch5 froze turned off and won't turn back on. It's been on the charger for 3 days now. plz help???

    Please help me I just got it and it's already messed up.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Im getting and error message that says there was a problem downloading the software for the iphone . the network connection timed out. I have been trying to do the update for 2 days now

    im getting the error message: there was a problem downloading the software for the update Iphone. The network connection timed out. I have been trying to update for 2 days now.

    Disable your firewall and antivirus while you download.

  • For iTunes experts! - My iTunes has been converting WMA files for 11 days!

    My question is: If I exit iTunes (i.e. Reboot my computer) and then go back to iTunes, will iTunes continue finishing the conversion process?
    My iTunes has been converting WMA files for 11 days now..
    It's converting my entire multi-thousand album collection from windows media player into iTunes.
    Will it start where it left off?
    Or, the dreaded, will it start all over again, causing thousands of duplicates in my new iTunes library?
    The ONLY status bar shows the current song, I have no idea which order it's going in or how much longer it has to go.
    I understood it would take a long time to convert the thousands of WMA files into iTunes format, but I have no way to know how much longer it will take, or if it's interupted what will happen!
    Thanks -
    - jb
    Message was edited by: jbmanz

    Understood. If I quit iTunes before it's done converting the files I had previously selected, it will not continue to convert the WMA's to iTunes format. I will have to re-select the songs I want converted.
    Now: What if I select the entire folder (containing all songs, some already converted into iTunes, others not yet converted) - will iTunes RE-Convert songs that it has already converted (therefore creating duplicates in my library)? Or is the software able to recognize that an identical entry is already in its library index?

  • I "stopped" items from going in the trash. Going on for two days now. Cannot turn off Mac while this is happening. How do I stop it?

    I have a MacBookPro OSX Lion version 10.7.5  I was trashing a lot of pictures. While the trash was working I added some more and got a separate box with all the items listed individually saying "transferring to trash". It was taking a long time so I clicked on the little "x" to stop the transfer. I have messages that say "stopping" for two days now. I cannot turn the computer off as long as this is going on.
    How do I stop this?
    Thank you.

    Hi Vickifromnewyork,
    Welcome to the Support Communities!  If your computer will not shut down, you can force it to do so by holding the power button down until the screen goes dark.  Here are the shortcut keys for Lion:
    OS X Lion: Shortcuts for sleep and shutting down
    Cheers,
    Judy

  • I have been running Firefox on my PowerPC G5 for years and have just tried to install 4.0. When I attempt to start Firefox, a window opens telling me the application cannot be launched. I have installed it twice with the same result. What gives?

    I have a PowerPC G5 quad core Mac with a pre-intel chip. I have been running Firefox successfully for over five years and have used every version in operation during that time. Tonight, I received notice that the latest version of 3.6 was ready to install and that I needed to restart. I did that and was taken to a page telling me that 4.0 was available for downloading and use. So I downloaded the new 4.0 and tried to install it in the typical Mac fashion. After clicking on the dmg, I dragged the icon into my applications folder and onto the dock. But when I click on the icon on the dock, I get the message: The application cannot be launched. 10661
    When I try to launch by double clicking in the applications folder, I get the message: You cannot open the application Firefox because it is not supported on this system.
    I had to go to your site using Safari of all things! I tried re-installing it with another download, and that one misbehaves in the same way. By the way, in case it matters, I still have 42 GB available on my hard drive and 5 GB of RAM.
    There is one other funny thing. The Firefox icon from the disk image has a white circle with the slash through it on top of the fox and world symbol. That is what appears in my applications folder and in my dock. It appears to be saying NOT FIREFOX, as it would indicate in a NO U-TURN sign. What is this all about?

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Have been using 3.6 for a j d edwards programme new computer is w8 what is the best compatable d/load

    have been using 3.6 for a j d edwards programme new computer is w8 what is the best compatable d/load have loaded latest version however when jd Edwards loads when each section within jd Edwards is opened blue circle saying launching application but that is as far as I can get . Had this problem with xp but wasa ble to dload older version of fire fox but it appears that these olderr versions are no use with windows 8

    Windows 8 Professional supports virtual machines, so you could install Windows XP in a VM and then use that to host an older version of Firefox. This does not appear to be minor undertaking: [http://4sysops.com/archives/windows-8-xp-mode-part-1-hyper-v/ Windows 8 “XP Mode” – Part 1: Hyper-V - 4sysops].
    Can you run your JD Edwards app in IE10 in compatibility mode? If so, that's probably the simplest workaround. You still can use Firefox for other browsing.

Maybe you are looking for

  • Namespace tag change in receiver file adapter

    Hi Group, My requirement: Need to change the Namespace tag at the receiver side. My XML will be something like below: <?xml version="1.0" encoding="UTF-8"?> <ns0:ASNList xmlns:ns0="http://www.apriso.com/SXI.GLS">    <EventData>       <SenderName>Test

  • How do I save my EXPORT custom preferences

    I want to make a custom preference for exporting MOV files*. There seems to be no SAVE PRESET... option so I have to keep entering in the details every time I want to do a custom export. Is there a way of saving custom export presets? *File->Export..

  • I cannot change language with my qwerty keyboard

    I'm using firefox for mobile 5 on LG LU2300(optimus Q) which has physical qwerty keyboard. When I try to change language to Korean with the qwerty keyboard, I failed. The language is stick to ENGLISH. When I use on screen touch keyboard, it's O.K. pl

  • Transfer Struc, Comm struc, Extract Struc,

    Hey All! I am working on a project of Business content development & i have the following question. Can somebody let me know how comm struc, Transfer Struc & extract struc& info source are maintained in the physical level. I ofcourse know that comm &

  • Ipod home button is stuck...what do i do?

    My sister's ipod touch (4th gen.) is stuck, i mean it'll wiggle a little bit but it won't come back up or work.