My background image isn't lining up between my design, preview, and web preview. HELP!

I'm new to using Muse and have spent the afternoon going through online tutorials etc. I understand the fundamentals of adding an image to use as a background, but when I upload the image, it lines up completely different in design, preview, and web preview screens. I've been playing around with different settings but I can't for the life of me figure how to make my preview and web preview look like my design page.
Below are design page, preview page, web preview.
I'm sure there is some fundamental piece I'm missing here as I can't seem to find any threads with the same question being posed. If I had hair, I'd be pulling it our right about now.

1) Resize your image in Photoshop to the maximum width you require for browser display (probably ~1600px, but certainly less than than 2560px) and use Save for Web to create a JPEG of it with the lowest JPEG quality rating you can stand (or your initial page load times will be slow) and import that back into Muse. (The most likely reason the Muse Preview is blank is that this image is too large, in terms of number of total number of pixels.)
2) In the Browser Fill panel in the Fitting options popup menu choose "Scale to Fill". Scale to fill will scale the image up proportionally such that none of the black background shows. If the aspect ratio of the browser window is different than the image, then a portion of the width or height of the image will be cropped. What portion is determined by how the image is aligned using the "Position:" control in the Browser Fill panel.
Because browser window sizes vary (since they're user resizable) the display of the image will be different than what is seen in Muse Design view. However, the letterboxing/pillarboxing effect in the screenshot you provided is due to the Fitting Option being set to "Scale to Fit" rather than "Scale to Fill".

Similar Messages

Background image from one slide appearing in all slides after and I can't remove it

Hello,
I'm modifying a course created with Captivate 5, in Captivate 7 and for some reason the background image from slide 35 is appearing in all slides after that one and I can't remove it. The most interesting thing is that when you look at the slides in the film strip they look different (like the original) than the one on the work area which contains the background image I'm trying to remove (screenshot below).
Any ideas or comments?
Thank you.

Hi Lilybiri,
Thank you for your prompt response. That was it!!!! You are awesome! I tried so many things and I don't know how that setting changed to "rest of project". Great thing to check next time.
I greatly appreciate your help.
Have a great day.

Output mismatch between BEx query output and WebI Report output

Hi All,
I have a BEx query in which there are only characteristics placed in rows.
There are combinations of the values of the characteristics giving different records in the query output.
Date is one of the characterisctics in the query output.
There is an output mismatch between the query output and the WebI report output in the following case:
When there are 'Not Assigned' or '#' or blank values, there are additional entries(rows) in the WebI report, giving repeating or wrong entries in the Date field. This is incorrect data.
Is this because of the 'Not Assigned' or '#' or blank values of the Characteristics or is there any other reason?
How do I fix this?
Please helo me with this.
Thanks and Regards,
Srilakshmi B

Hi Rajesh,
I need to verify the WebI report output for records with # and 'Not assigned' values for the cHracteristics in the report.
So I cannot check the WebI report by hiding the # or Not assigned values.
The problem is that in the Query output the records are like these shown below:
Char1                    CHar2                          CHar3                       Date field
A                             B                                 C                                Date1
#(Not assgined)      #(Not assgined)      #(Not assgined)             No value
Where as the WebI report output is as below:
Char1                    CHar2                          CHar3                       Date field
A                             B                                 C                                Date1
#(Not assgined)      #(Not assgined)      #(Not assgined)            Date1
As shown here, there are wrong/repeating entries for the Date field in the WebI report output.
Please check this and let me know what could be the issue and how do I fix it.
Thanks and Regards,
Srilakshmi B

Image content type in Site Asset Image library: The Preview and Thumbnail Preview columns do not display the picture of the item.

I have two different Site Asset libraries. The Site Asset Picture library has items of
content type picture. The Site Asset Image Library has items of
content type image.
1) I do not quite understand the different between a picture content type versus an image content type.
2) the thumbnail and preview columns do not display the image in the Site Asset
Image Library. (the image does display in the thumbnail column of the Site Asset Picture library.) I expected the image to display in the Site Asset Image Library the same as it does in the Site Asset Picture library.
Why doesn't it?
Betty
Betty Stolwyk

I have subsequently found out that our "Site Asset Images" library is a Document Library to which someone must have replaced the Document content type with an Image content type. I also found out that picture previews/thumbnails cannot be displayed
in Document libraries. So the problem was the library type, not the content type.
So I simply created a new Picture Library (whose content type = picture) and copied the files into that and the thumbnails displayed just fine!
I bet what led to this is the default "Site Assets" library that is created for a new Team site. It is just a document library but sounds very similar to the "Assets" library. I can imagine someone thinking the "Site Assets" library was a standard
container for images, and simply changed the name to better identify the content!
As far as 'image' vs 'picture' content types, I noticed that a new Picture Library contains a content type of 'picture', but an Asset Library contains a content type of 'image' (as well as audio and video). Although the 'image' content type has a few
more fields than the 'picture' content type (picture content type does not have thumbnail), the actual Picture Library contains pretty much all the same fields, including the thumbnail. So for all practical purposes, either library type can be used for
storage of pictures. I am guessing that the Pictures Library which uses the picture content type is for backwards compatibility purposes, and that the 'image' content type is newer, being derived from the new "Rich Media Asset" content type and used
in the new Asset Library which can hold audio and video in addition to pictures.
Microsoft Help also mentioned that a Picture Library has a slide view which an Asset library does not. So my take on that is that if you want the potential of seeing your pictures as a slide show, put them in a Picture library which is still using
the 'picture' content type of previous SharePoint versions. If you want to keep pictures organized with audio/video files, then put them into an Asset library which uses the 'image' content type derived from the new Rich Media Asset content type.
Betty Stolwyk

SSO between custom C++ application and web browser

Hello.
I have a bit of problems figuring out how to do SSO functionality between a Browser and a custom client (custom protocol over HTTP).
I want it to work as follows: If the user logs in in the HTTP client, the user is already logged in in the custom client, and vice versa.
I thought this could be implemented my reading and writing cookie values from the browser in my custom client, but it seems like the cookies set are all without expiration. IE handles these cookies private in a process, and so I can't get a hold of it.
How do I implement SSO between clients if I can't base it on cookie values?
Regards
Kyrre.

Any comment?

Large Blank/grey area between recieved email list and actual message HELP!

This happened suddenly when trying to show off the features of to do. all I did was delete the to do in the email message I was in and the email went hay wire sending a bunch of blank notes and now there is a blank/grey area between every message and the list of emails. The space is very large about 3 inches in length.
Thanks for the help

No problem. I think it is worth posting these things so Apple know and so others know. I have a number of issues and I was thinking about going back and doing and Archive and Install in case they had been caused by me just doing the upgrade. But when I see the issues come up here I know it's probably a bug. Like you say quite a few of them
Michael

Authentication between Single Sign-On and Web based applications

Hi everyone,
I need to create a way in Portal 10g (10.1.2.0.2) that allow me to do the following:
Once the user is logged on Portal (against Single Sign-On - SSO) he doesn't need to retype his username/password when he access a web based application throught the portal, in my case, an ASP application (not .NET, just ASP).
I made a test creating a External Application in SSO and after publishing this portlet (external application) inside portal.
It worked, BUT I was prompted to inform username/password to log on the aplication.
So, the user end up entering his password twice.
Does anybody know a way to acomplish this task?
The documentation I'm researching is:
Oracle Application Server Single Sign-On
Administrator's Guide
10g Release 2 (10.1.2)
B14078-02
Oracle Application Server Single Sign-On
Security Guide
10g Release 2 (10.1.2)
B13999-03
Thank you very much,
Diogo Santos.

have figured out how to secure any HTML, ASP, PHP, CFM, etc. web page again Portal / OID using the PDK toolkit.
Using AJAX (Asynchronous JavaScript and XML) and one Oracle Stored Procedure just adding a simple Javascript call to any HTML, ASP, PHP, etc. web page can secure it via Oracle SSO (OID). Access to any secured web page will require that it to be linked from an authenticated Portal session or a page opened in an authenticated Portal session.
This process can be easily modified to add in group security etc. This is just my starting point.
1) Create a stored procedure
# Make sure it has access to portal.wwctx_api.is_logged_on
CREATE OR REPLACE PROCEDURE login_ajax_check (
display_error IN number default NULL) AS
BEGIN NULL;
If portal.wwctx_api.is_logged_on = false then
htp.prn('DENY');
ELSE
htp.prn('ALLOW');
END IF;
Exception when others then htp.p('DENY');
END;
2) Use this Javascript in any page you wish to secure.
<-- Begin Paste Here -->
<script>
var allowgo=2
function ajaxCallRemotePage(url)
if (window.XMLHttpRequest)
// Non-IE browsers
req = new XMLHttpRequest();
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send(null);
else if (window.ActiveXObject)
// IE
req = new ActiveXObject("Msxml2.XMLHTTP");
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send();
else
return; // Navigateur non compatible
// process the return of the "ajaxCallRemotePage"
function CheckPortal()
ajaxCallRemotePage('[Your page calling the procedure from above]');
function processStateChange()
if (req.readyState == 4)
if (req.status == 200)
if (req.responseText.substring(0,4) == 'ALLO')
allowgo = 0;
else
allowgo = 1;
function doPage()
if (allowgo==1)
window.location='[Your login or error page]';
CheckPortal();
doPage();
</script>
<-- End Paste Here -->
That's it!!! Super easy. It works great too.
Larry Schenavar
[email protected]

I have problem with previous billing purchase,now i cant change my credit card because my previous credit card was closed,and there in none selection between the visa mastercard and amex,please help i want to to purchase,and change credit card

please help me i already input another card and the securitycodes but the device said for assistance,contact iTunes Support at www.apple.com/support/itunes/ww/.
it doesnt help at all please help me
i want to purchase and change credit card

This is a user-supported forum. You are talking to other users here, not Apple. As the advice suggested, contact iTunes Customer Support at: http://www.apple.com/support/itunes/contact/

JCO difference between SAP J2ee 620 and Webas 640 for Internet Sales

Does anyone have some information on how Internet Sales manages JCO calls to R/3 or CRM on WebAS 640?
Till J2EE 620 the sapjco.jar file directory had to be in classpath along with the relevant dlls in WinNt directory.
WebAs 640 Java installation doesn't mandate any such steps.
How does this work? The jar probably is in the cluster/server/bin/ext folder but what about the native libraries? How are they loaded.
I am having problems making RFC calls to R/3 from a web application deployed on SAP WebAS 640.
This is not the internet sales application but a general J2EE application and I was wondering if i could use the same approach as used by Internet Sales to load the native libraries.
Any help would be appreciated.
Bharat.

Vivek,
We have the WebAs 640 Java system running on a AIX server. I placed the following folder under classpath
/usr/sap/<SAPSID>/JC**/j2ee/cluster/server/bin/ext/com.sap.mw.jco/sapjrfc.jar
The error thrown is
JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [Can't find library sapjcorfc (libsapjcorfc.a or .so) in sun.boot.library.path or java.library.path
sun.boot.library.path=/usr/java14_64/jre/bin
java.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib:/usr/lib:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/JC15/j2ee/os_libs:/usr/lib:/lib:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib]. java.library.path [/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib:/usr/lib:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/JC15/j2ee/os_libs:/usr/lib:/lib:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib]
The problem is a search on libsapjcorfc.* only return dll files and no .so or .a files.
Wondering how ISA loads the native libraries on AIX!
Thx,
Bharat.

Different behaviour between activity "Change Production" and web-service

Hello!
We are using SAP ME 5.2.6.1 (SP06 Patch 1) - the newest version of SAP ME 5.2
In activity "Change Production" (SU540) it is possible to change shop order, material and router of SFC's.
This also works for SFC's in status DONE if the following activity rule is set
ALLOW_DONE_SFCS = TRUE.
Nevertheless if the same is tried via "Production XML" or with the given web service an error is displayed
and the operation is not performed.
When using "Production XML" the following error is shown:
Cannot change Done SFCs (Message 15050)
When using the web service (http://<host>:<port>/manufacturing-services/ProductionServiceService)
the same error occurs. I think the web service is the prefered way in the future.
For me it seems that only with the GUI activity SU540 the rule "ALLOW_DONE_SFCS = TRUE" is effective.
But should the behaviour not be identical regardless if this was initiated from the GUI or from the web service?
So is this something like a bug or is it "behaviour by design"?
If the latter is the case:
Is there a workaround possible to achieve the same outcome via webservice?
Kr,
            Erich Lind
Edited by: Erich Lind on Aug 5, 2011 10:37 AM

Hello!
From the SAP ME Transaction Log Report:
Concerning the "Production XML" interface - it uses the ChangeProduction EJB.
I assume the web service internally will do the same ...
class com.sap.me.frame.BasicBOBeanException message: com.sap.me.frame.BasicBOBeanException: Error 15050Cannot change Done SFCs (Message 15050)
     at com.sap.me.production.ChangeProductionSOBean.validateSFCList(ChangeProductionSOBean.java:1413)
     at com.sap.me.production.ChangeProductionSOBean.validateXMLProductionChanges(ChangeProductionSOBean.java:255)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:592)
     at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
     at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
     at $Proxy3489.validateXMLProductionChanges(Unknown Source)
     at com.sap.me.xchange.ProductionFacadeSOBean.processChangeProductionMessage(ProductionFacadeSOBean.java:997)

Seamless PDF compatibility between iPad Mini 3 and Mac Preview?

First time owner of an iPad here - iPad Mini 3. Longtime user of Mac computers.
I read a lot of PDF's and I am constantly highlighting. I bought an iPad exclusively to do reading/highlighting of PDF's. I would like to be able to highlight PDF's on my iPad and then see the highlighted marks when pulling up the PDF on my rMBP's Preview. I use Preview on my laptop because it is really convenient and straightforward for highlighting PDF's.
Is this possible? I've just realized neither iBooks nor the Adobe Reader app allows highlighting of PDF's. I don't understand why Apple needs to make this so difficult?

To clarify, I am not looking for something that permanently alters a PDF document, but could be "un-highlighted" by the Mac Preview app need be.

[ANSWERED]Which terminals let you set a random background image?

Many terminals nowadays let you set a background image on the terminal itself.
Which terminals let you set a random background image from a directory or list of images? Also need to be able to have multiple terminals with different background images open, so having a script that moves around images won't work.
I like this because when you have lots of terminals open, you can associate each with their background image. Also if your background image isn't a tiled thing or a stylized gradient (such as a human, etc), it might look bad when duplicated all over the screen.
I could use transparency, but I don't like psuedo transparency, and real transparency comes with all sorts of problems. (For me at least.) I would still prefer having multiple background images though.
Konsole and eterm are the only two I know that can do this, but konsole is KDE, and eterm has no unicode support, is dead (I think), and is ugly.
Last edited by sokuban (2008-12-31 21:20:12)

So now that time has passed and I'm on a clean new install, I decided to try out uxvrt again. The good news in that now I can type in it with scim. I have no clue how or why, but it means the greatest hurdle is gone.
I also even managed to get a good looking English font.
urxvt*font: xft:Monospace:pixelsize=12
Only problem is a readable east asian font. The default font is a mess and everything is squished together. If I explicitly select an east asian font, then there are huge spaces between each letter, even for english. So I find out this is a known bug, and I find a patched aur package for it, but the patch doesn't seem to make a difference.
I know urxvt lets you select a main font and a secondary font and so on. Maybe I did the syntax wrong. I tried both:
urxvt*font: xft:Monospace:pixelsize=16
urxvt*font: xft:WenQuanYi Zen Hei:size=9:antialias=True
and
urxvt*font: xft:Monospace:pixelsize=16,urxvt*font: xft:WenQuanYi Zen Hei:size=9:antialias=True
Neither of them worked. From what my understanding of what the man page says, the size of the cell is supposed to be based on the main font, but in both those cases the secondary font stretches the cells.
Can anybody reccomend fonts for east asian scripts that work well and show me your .Xdefaults ?
FAKE EDIT: I just thought of an idea, and it kinda works:
urxvt*font: xft:Monospace:pixelsize=16,xft:WenQuanYi Zen Hei:size=9:antialias=True
Now I get a readable font, but massive spacing issues between Chinese Characters.
EDIT: About the pixmaps, I got a script to randomly select and image and all is fine, but I can't seem to find a way to disable scaling. I can set the size of the picture by a percent, but it doesn't let me use decimals and it is impossible to get the exact resolution of the picture to display. (Unless I let it tile, but the pictures I am using aren't meant to be tiled.) Is there a way to either disable scaling, or set the urxvt size in pixels so I could make it exactly 640x480. The urxvt man page says that a scale of 1 disables scaling, but it seems to have no effect.
EDIT2: I just noticed I can't use scim now. I have no clue why, but I think compiling it with afterimage support breaks it.
EDIT3: I found out why scim was not working/working. I had to add this to my ~/.scim/global:
/SupportedUnicodeLocales = en_CA.UTF-8
I also got a script that works, kinda:
#!/bin/bash
image="$(ls /usr/local/share/cgs | sort -R | tail -1)"
urxvt -pixmap /usr/local/share/cgs/$image\;86x100
The only problem is that I don't know how to get urxvt -pixmap to keep the aspect ratio of the image. 86x100 is the closest it will let me get to the actual aspect ratio, but it is off slightly. Barely noticable. The man page says that propscale will do this, but it doesn't seem to work.
Either way, for now, I am just going to use 86x100.
Last edited by sokuban (2009-03-22 02:01:45)

Animated gif layered above background image

I have a static background image which is displayed in a JPanel. I need to display animated gifs at certain positions on the base image. For every new frame of the animation, the paint method is called whcih attempts to load the entire base image + all the new animated images which is extremely slow!. It also means the animated gif keeps on getting loaded, and seldom gets beyond the first frame.
Im sure many people have had to do something like this. Is the solution to draw the gifs on the glasspane (or use layered panes), and to have a seperate paint method? or is their a simple approach like setting a special clip area.

thanks for the help...
The size of the background image is approx 400*400 pixels (gif or jpg), and the icons are 25*25, and have between 1 and 6 frames.
Here comes the code... I havent finished with the mediatracker stuff, but youll get the idea Im sure.
public void paint(Graphics g) {
    MediaTracker tracker = new MediaTracker(this);
    tracker.addImage(image,0);
    try {tracker.waitForID(0);}
    catch (InterruptedException e){}
    g.drawImage(image, 0, 0, this); //draw background image (approx 400*400 pixels)
    int ICON_ID = -1;
    Image img;
    //draw all the icons...
    //all icons have between 1 and 6 frames. 25*25 pixels.
    for (int i = 0; i < icon_IDs.size(); i++) {
      try {
        ICON_ID = new Integer(icon_IDs.elementAt(i).toString()).intValue();
        Point p = dm.getIconPosition(ICON_ID);
        if (isAlarm(ICON_ID)) {        //ITS AN ALARM - use animated gif
          img = getAlarmImage(ICON_ID);
        else                          //NORMAL ICON - no animation
          img = DataDefinition.getImageIcon(dm.getIconType(ICON_ID)).getImage();
        tracker.addImage(img,0);
        try {tracker.waitForID(0);}
        catch (InterruptedException e){}
        int width = DataDefinition.getSize(dm.getIconType(ICON_ID)).width;
        int height = DataDefinition.getSize(dm.getIconType(ICON_ID)).height;
        g.setClip(p.x, p.y, p.x+width, p.y+height);
        g.drawImage(img, p.x, p.y, p.x+width, p.y+height, 0,0,img.getWidth(this),img.getHeight(this),this);
      catch (SQLException sqle) {
        System.out.println("Could not find position of icon : " + ICON_ID);
}

Inserting background images

Hello again,
I'm inserting a background image on a business card. I can change the opacity to be able to view the text and on the screen it looks great. When I go to print, the background image isn't close to what was on the screen. Any ideas?

you can never be 100% sure that what you print will be what you see on the screen, it has a lot to do with the quality of the printer too and it's imaging capabilities.

Background image is slightly repeating itself in my table

Last week, someone really helped (Murray) in helping me add a
background image to my header table, then nesting another table
inside for my links. I tried to do it manually, however, it just
wouldn't work. He then added some new code and it worked perfectly!
However, I did notice that now the background image in that table
doesn't extend the full length of the table. It cuts of 1/8th of an
inch short and then the image starts to repeat itself. It isn;t
much but doesn't look clean. Any ideas on how to change it to
flush? I tried to manuever the main table of the site over, but it
didn't have an effect. I think the background image just stayed the
same with the change. Thanks for your help once again! Code is
below but had to shorten it since ithis site only allows a certain
amount of text. website is:
www.1percentclub.org
<html>
<he
><title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<script language="JavaScript">

</script>
</head>
<style type="text/css">
a {text-decoration: none;}
</style>
<body bgcolor="#000000" text="#CCCCCC" link="#33CCFF"
vlink="#33CCFF" alink="#33CCFF" leftmargin="0" topmargin="0"
marginwidth="0" marginheight="0"
onLoad="MM_preloadImages('/History-Header2008WhiteBord.jpg','/Showcase-Events-LinkWhiteBo .jpg','/Instructional-DVD-2008GLOW.jpg','/Skills-Clinics-Link-2008GLO.jpg','/Contact-Us-Li nkGLOW.jpg','/GameTimeGear-LogoGLOW.jpg','/Playitagainsports-logoGLOW.jpg','/Africa-Link_G LOW.jpg')">
<table width="60%" border="1" cellspacing="0"
cellpadding="0"
bordercolor="#FFFFFF" align="center">
<tr bgcolor="#333333" valign="top" align="center">
<td height="1125">
<div align="left">
<table width="100%" border="0" cellspacing="0"
cellpadding="0"
style="background-image:url(2008-Website-Header_FINAL_-.jpg);">
<tr valign="top">
<td height="289">
<table width="100%" border="0" cellspacing="3"
cellpadding="7">
<tr valign="top">
<td height="40">
<p><font face="Arial"
color="#333333"><b><font size="3"
color="#33FFFF"><a href="homepage.htm"><font
color="#33CCFF">Home
</font></a><font color="#33CCFF">|
</font><font color="#33CCFF"><a
href="centralcalifinest.htm">Showcase
Events</a> | <a href="clinics.htm">Skill
Clinics</a> | <a href="clinics.htm">Team
Clinics</a> | <a href="videos.htm">DVD</a>
| <a href="History.htm">History</a>
| <a href="Contact_1%25_CLUB.htm">Contact
</a></font></font></b></font></p>
</td>
</tr>
</table>
<p><br>
</p>
<p> </p>
<p><br>
</p>
</td>
</tr>
</table>
<table width="100%" border="0" cellspacing="0"
cellpadding="6">
<tr>
<td height="780" align="center" valign="top"
width="25%">
<table width="100%" border="0" cellspacing="0"
cellpadding="0">
<tr align="center" bordercolor="#FFFFFF"
bgcolor="#333333">
<td height="122"><a href="#"
onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image14','','/History-Header2008WhiteBord.jpg',1)"><img
name="Image14" border="0" src="/HistoryLinkWhite-border.jpg"
width="180" height="118"></a></td>
</tr>
<tr align="center">
<td height="125"><a href="#"
onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image15','','/Showcase-Events-LinkWhiteBo.jpg',1)"><img
name="Image15" border="0" src="/Showcase-Events-Link2008Whi.jpg"
width="180" height="118"></a></td>

Change this -
<table width="100%" border="0" cellspacing="0"
cellpadding="0"
style="background-image:url(2008-Website-Header_FINAL_-.jpg);">
to this -
<table width="100%" border="0" cellspacing="0"
cellpadding="0"
style="background-image:url(2008-Website-Header_FINAL_-.jpg);background-repeat:no-repeat; ">
It's time for you to apply yourself to learning HTML and CSS.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dontsettle22" <[email protected]> wrote in
message
news:fnq7cb$a2p$[email protected]..
> Last week, someone really helped (Murray) in helping me
add a background
> image
> to my header table, then nesting another table inside
for my links. I
> tried to
> do it manually, however, it just wouldn't work. He then
added some new
> code
> and it worked perfectly! However, I did notice that now
the background
> image
> in that table doesn't extend the full length of the
table. It cuts of
> 1/8th of
> an inch short and then the image starts to repeat
itself. It isn;t much
> but
> doesn't look clean. Any ideas on how to change it to
flush? I tried to
> manuever the main table of the site over, but it didn't
have an effect. I
> think
> the background image just stayed the same with the
change. Thanks for
> your
> help once again! Code is below but had to shorten it
since ithis site
> only
> allows a certain amount of text.
>

My background image isn't lining up between my design, preview, and web preview. HELP!

Similar Messages

Maybe you are looking for