My backlight is always on,im unable to off the light,can anyone help me?
my backlight is always on,im unable to off the light,can anyone help me?
This discussion may help.
It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards.
Similar Messages
-
Hi
My ipad has a message saying a movie rental has expired and I cant remove it, so am unable to use it. Can anyone help?Hi there, this problem has probably been resolved now, but I must say that I came across these posts today as I had the same problem, my old e mail kept popping up, but all sorted now! Old Apps are not tied to the old Apple ID, honestly!
Rudegar is so right, all you do is go the SETTINGS/iTunes & App Store, then select `Apple ID` `Sign Out` then you get the chance to enter your new ID, and it worked a treat!
Good luck with anyone else with this problem, as I spent so long on this, really stupid!
PS you`ll need to again verify bank details -
Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
Since downloading the new iOS 6 update I am unable to connect to wifi can anyone help?
Can anyone help, I've been unable to connect to my wifi or any other wifi since downloading the iOS 6 update
Look to your right under More Like This --->
-
Unable to create index ..can anyone help me
Dan,
I have created the following table and the values are as following,
create table zonetemp(
name varchar2(15),
SHAPE MDSYS.SDO_GEOMETRY)
insert into zonetemp values('Raju',
MDSYS.SDO_GEOMETRY(2003,null,null,
MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),
MDSYS.SDO_ORDINATE_ARRAY(10,30,40,10)))
insert into zonetemp values('Kalpan',
MDSYS.SDO_GEOMETRY(2003,null,null,
MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),
MDSYS.SDO_ORDINATE_ARRAY(0,20,40,0)))
insert into zonetemp values('Chetan',
MDSYS.SDO_GEOMETRY(2003,null,null,
MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),
MDSYS.SDO_ORDINATE_ARRAY(0,40,40,20)))
commit
I am unable to index the table.
exec geocoder_http.setup_locator_index('ZONETEMP','SHAPE');
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13219: failed to create spatial index table [ZONET_SHAPE_IDX_HL13N1$]
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 7
ORA-06512: at line 1
ORA-06512: at "MDSYS.GEOCODER_HTTP", line 168
ORA-06512: at line 1
My Query :
SELECT NAME FROM ZONETEMP A
WHERE SDO_FILTER(A.SHAPE,MDSYS.SDO_GEOMETRY(2001,null,MDSYS.SDO_POINT_TYPE(20,20, 0), NULL, NULL)),'QUERYTYPE='WINDOW') ='TRUE'
Basically these gemoteries are polygon.
what i want to do is query this table with the operator SDO_FILTER with reference geomotry as POINT and find the corresponding polygon in which it is found.
Is it Possible?Is this a valid Query?
N.B for the ploygon definations one can asssume a gird layout of 40*40.
nullHi Raju,
There are a few things I would change below.
The first is that optimized rectangles (which you are using) need to be specified as lower left then upper right, assuming the lowest values are in the lower left corner of the coordinate system.
The way you've specified them is upper left, lower right which will not work.
The second thing I would change is your create index statement. You shouldn't be using locater to create the index - locator is a separate product should be used only with point geometries.
Your create index statement should look something like this:
create index zonetemp_sidx on zonetemp(shape)
indextype is mdsys.spatial_index
parameters ('sdo_level=NN');
where NN above is an integer number representing the tiling level you are going to use for the index. This is workload dependent, but I will give you a range of 8-12 to start with - you can protype using real data and figure out what gives you the best performance - if it is 12 you may want to go higher.
Also, you will have had to preload user_sdo_geom_metadata.
Finally, your query looks good, although I would change it slightly to set the third ordinate to NULL rather than 0, i.e.:
SELECT NAME
FROM ZONETEMP A
WHERE SDO_FILTER (A.SHAPE,
MDSYS.SDO_GEOMETRY(2001,null,
MDSYS.SDO_POINT_TYPE(20,20,NULL),
NULL, NULL)),'QUERYTYPE='WINDOW')
='TRUE'
Hope this helps,
dan -
Hi lots going wrong with my music library, artwork is muddled up and also losing tracks because of this, also unable to download latest version of itunes and finally i cannot burn my music to disc. i have an external hard drive and a fairly large library, around 30,000 on it. Any suggestions!!
Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode. -
After my last update of Itunes I am unable to get on line.can anyone help?
Why can I not get on line after my last itunes update?
If you are unable to get online, how exactly did you post to these forums?
Maybe you'd like to clearly explain what the real issue is. -
I have downloaded an iOS update on my iPad air2 but it has locked the screen and I can only see the iTunes symbol with a white arrow and a padlock below it. I have tried turning the iPad off and on but the same screen reappears. Has anyone had a similar problem?
What that symbol indicates is that your iPad has gone into recovery mode and now it needs to be restored in order for you to be able to use it again. You can reboot from now until the cows come home and it will not do any good.
You do indeed need to plug your iPad into your computer and use iTunes to restore the device.
Use iTunes to restore your iOS device to factory settings - Apple Support
Just in case you need to use recovery mode.....
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
My ipod touch has a white screen and I am unable to reset it. Can anyone help? I
Hi... any help would be appreciated. My iPod Touch has a white screen. I have tried resetting it following the directions on Apple's site and have not been successful.
Can anyone help?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am unable to install Adobe Flashdrive. Can anyone help me?
I am unable to install Adobe. Can anyone help me?
If your Mac meets the System Requirements for the latest version (google for those) You can get it here.
http://get.adobe.com/flashplayer/ -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
i carnt hear my message tone,the sound it makes when the phone locks and opens,also i am unable to hear music when playing from my phone but my ringtone and alarm tone work.Ive made sure the silent button is not on,and the volume button on the side of the phone is just showing it blank instead of it going up and down.To try and fix this i have reset my settings and restored my phone,but now its just skipping the music i have purchased from itunes when in a docking station which is now another problem i have as well.Can anyone help????
Hello dbrookes,
Thank you for using Apple Support Communities!
It sounds like even though the Mute switch is not on, sounds are not making the, well, sound they should, and the volume buttons make a blank volume indicator appear on the screen that does not show the volume level.
I wanted to recommend a couple of things.
First, I would reset the phone:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve the issue, then you may want to try backing up to iTunes, and restoring the iPhone again but this time do not restore the backup and set it up as new to see if the issue persists without the previous configuration.
Just incase you need it, this article will help with that:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Cheers,
Sterling -
Hey, when I connect either my ipod or ipad to itunes I get the prompt 'itunes was unable to load data class information from sync services. Reconnect or try again later. Can anyone help me with syncing my devices?? Thanks in advance
I am having the same issue, anyone else ?
-
Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?
The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.
-
I have been trying to Export a 48 minute movie (stills, titles, transitions, and background music using iMovie 11 Ver 9. After a couple of hours of rendering, it stops with th efollowing error: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (File already open with with write permission)". Can anyone help? Thanks.
I'd start with the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows
Maybe you are looking for
-
When trying to setup my external hard drive, I get this box that pops up and says this: You can't open the application "LaCie Setup Assistant" because PowerPC applications are no longer supported.
-
Dynamically show/hide pages in a workset for special users at runtime
Hi all, I want to create a workset that contains pages for different countries. The portal users should only be able to see the countries where they do business. I also would like masterdata from R/3 to drive the display of content on the portal. - I
-
SERVICE LOCATOR ?? Is it really an interesting Design pattern??
Hi everybody, i've a problem with the J2EE Design Pattern "Services locator" (it's a singleton). It is said that by making use of a Service Locator we can : - hide to the client the complexities of initial context creation, EJB home object lookup,and
-
Every time I log into anything, I get a prompt in a box in the upper portion of the screen asking if I'd like to remember the password. I don't want any passwords remembered. How can I prevent the "Save password" prompt from popping up?
-
Need help buying ibook from ebay please :-)
Hi there I am rather new to mac but I am getting on with it well. But at the moment I have a imac and g4 power mac which are taking up abit of space so I would like to get something smaller so a ibook would be good. I don't really want to buy one new