My Bad - Logic and FX Sync'ing

Wouldn't you know it. I picked the Tremolo as an example and it has tempo sync'ing. What about chorus, flanger, phaser, Modulation Delay etc. Just seems to be missing either the Beat Sync button or the dual purpose time control like the Tremolo. An oversight??
Larry T

sending audio through the network is attractive, although your comment is a bit scary.
Yeah, the feature is attractive, but it practice it's never been particularly easy to do this reliably.
I've tried all kinds of solutions, and while I've been able to get them to work, it's never been particularly solid, for all kinds of reasons, especially variable latency.
is there more information about accomplishing this - again - a la a rewire setup...
i'd only be interested in sending a stereo pair from the ppc to a channel or aux in on the intel side...
A simple stereo pair is easy enough - you can use OSX's network audio plugins to send and receive audio across the network. However, you will have the need to accurate timing of the audio, because it needs to "line up" with the host DAW. Give it a try, because it's free and easy, and see what success you have with it.
You can also try FX Teleport and do it that way, which works in a similar manner but should have latency a bit better.
If you have a PPC machine with an inbuilt digital output, then it would be easier to connect that to your current audio interface and transfer your stereo feed digitally...

Similar Messages

  • Logic 8 and 9 sync'ing on two separate computers

    hi there and thanks for reading this post.
    here's my setup...
    1 ppc mac g5 running logic pro 8 - with various vst virtual instruments that only work on the ppc platform
    1 intel mac pro 8 core running logic 9 - with au virtual instrumets only
    here's my question...
    can i run/network the two macs so that the intel is the master, the ppc vst instruments chase the intel's au vi's and - if that wasn't enough - all audio from the ppc is routed - like a reason rewire setup - to the intel master's environment/mixer/rme audio card.
    in other words - i am not interested in node'ing the computer, nor am i interested in having to take audio out of both the ppc and intel separately to another mixer.
    i would ultimately like all audio passing through the intel.
    anyone out there with some ideas....
    thank you

    sending audio through the network is attractive, although your comment is a bit scary.
    Yeah, the feature is attractive, but it practice it's never been particularly easy to do this reliably.
    I've tried all kinds of solutions, and while I've been able to get them to work, it's never been particularly solid, for all kinds of reasons, especially variable latency.
    is there more information about accomplishing this - again - a la a rewire setup...
    i'd only be interested in sending a stereo pair from the ppc to a channel or aux in on the intel side...
    A simple stereo pair is easy enough - you can use OSX's network audio plugins to send and receive audio across the network. However, you will have the need to accurate timing of the audio, because it needs to "line up" with the host DAW. Give it a try, because it's free and easy, and see what success you have with it.
    You can also try FX Teleport and do it that way, which works in a similar manner but should have latency a bit better.
    If you have a PPC machine with an inbuilt digital output, then it would be easier to connect that to your current audio interface and transfer your stereo feed digitally...

  • An album had a bad download and wont sync into my library what can i do

    I downloaded an album and the songs all cut off before they are finished. Does this mean that they were bad downloads? When I sync my ipod the new album doesnt get synced to my ipod. What should i do?

    It's possible. You can delete the album and download it again to see if that helps.

  • DFSR Server 2003 and 2012 sync'ing together

    Hello All...
    I have 2 domains in the same forest connected via a VPN over the Internet.  Each domain has a Windows Server 2003 DFSR server and replicates with each other a folder that contains 95 GB and 128 KB files.  To decommision the
    2003 servers, I now have a 2012 server in each domain .
    My question is it better to manually copy the existing folder to the new server and then run the New Member Wizard or run the Wizard and have it build the mega folder on its own...?
    Thanks... Tom...
    Tom Karpowski...

    Definitely manually copy (called pre-seeding) to the new server.  Here's a couple blog posts on pre-seeding. The second is part of a series which you might find helpful given your stated goal.
    http://blogs.technet.com/b/askds/archive/2008/02/12/get-out-and-push-getting-the-most-out-of-dfsr-pre-staging.aspx
    http://blogs.technet.com/b/askds/archive/2010/09/07/replacing-dfsr-member-hardware-or-os-part-2-pre-seeding.aspx
    I've seen situations where DFSR replication groups would never finish initial sync because files were being edited too fast to ever make it through the backlog that started from Day 1. 
    Smart to ask this up front instead of trying to get DFSR to sync this for you...over a vpn no less.  Good luck!

  • Sync'ing a Palm Zire 72 with Windows 7 (Home Premium 64)

    Ok I am probably a dinasour but have relied on my Zire 72 for years for all the contacts and calendar items I don't want to keep on my phone but now cannot get it to sync with Windows 7.  I never used Vista, migrated straight from XP to Windows 7 but have read all the threads on Vista and hot sync'ing.  I know I apprently can't use the direct USB cables as there are no 64 bit drivers from palm for this so I purchased the recommended USB-1510 IRDa adaptor.  Even though Cables Direct does not seem to have Windows 7 drivers, Windows 7 appeared to recognize and accept the Vista 64 drivers and the adaptor seems to be recognized.  I am using Hotsync 4.1.0 and Palm Desktop 4.1.4.  Have tried everything, soft resets of the Palm, reboots of both the computer and palm, reinstallation of the software, etc and cannot get these to sync.  I either get the message that the connection cannot be established or once or twice that the port was being used by another process.
    Does anyone have any suggestions before I competely give up.  Many thanks!
    Post relates to: Zire 72

    I have hotSync Manager 6.0.1 and while the Zire 72 will NOT sync over the USB cable it will sync over a Bluetooth connection. You need to have a Bluetooth interface either built into the computer or a Bluetooth USB plug in device. Then you have to set up the channel by making both devices visible to other devices once they recognize each other you have to follow the dircetions in Windows 7 for making it a trusted device. After they are trusted devices they will sync over Bluetooth which is slower that using a straigth USB cable but it works.
    This is also the way you can sync a Palm LifeDrive and HP Ipaq with SW on Windows 7. Yes I have all three and this was the easiest way so  I could make them sync up suing the same interface. The Lifedrive and HP Ipaq can also sync over WIFI but this was easier for me since all the devices use the same interface, i.e. no remembering special setups.
    I am running WIn 7 Home Premium and I am using Palm Desktop Application 4.1.4 for all Palm syncs. I have 2 Zire 72 Palms and 1 Life drive. They all come up in that Palm Desktop Application allwoing me to copy things from one to the other.

  • What is the best way to have Mac setup for sync-ing 2 calendars?  Any way to change? When we 1st got our Macbook we unknowingly set it up wrong--as 2 separate users, with separate everything. Good for contacts and email, bad for calendar, photos, music.

    What is the best way to have Mac setup for sync-ing 2 calendars?  Any way to change?  When we first got our Macbook we unknowingly set it up as 2 separate users, with separate everything.  Now I have an iphone and I want to sync calendars but not contacts or email.  Any direction you could give would help! thx

    Anyone...anyone? Bueller...Bueller?

  • IPod Touch 5.1.1 no longer sync'ing w/ iTunes 11.1.3(8). . . .Bad Battery ???

    Three day ago my iPod began acting up in a major way.  The battery charging symbol within the battery indicator is no longer showing the iPod being charged when plug in to my MacBook Pro 5.1 via one of my two USB ports.  A new Apple iPod cable was purchased thinking it was a bad wire or pin not making the proper contact with this device.  The same conditions are happening with this new cable.  I have several other peripheral devices and those devices are working and are connecting to my MBP's USB port without any issues.  I have noticed for the past six months my iPod Touch 3rd Gen has been showing signs in needing longer charging times and seems to drain quicker than it used too.  The iPod for the past two nights have been charging for more than eight-hours each night and is sporadic as if it deciding "I'm I fully or 30% charged?" Although subtle, It seems to jump within the sliding battery scale when the device is powered off for a while.  Sometime showing 80% charged when used for a few hours to 30% charged when used for ten minutes.  My iPod is now over three-years old and I think it is time for a new battery!
    But, in all honesty, not sync'ing with iTunes is it more than just have a new battery professionally installed? Or are there other electronical problems/components going bad with these devices?  What else can be wrong other than a new battery or will a new battery fix all what is mentioned above? Please be very honest and technical if needed, Thanks!

    Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace the bttery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the battery yourself if you are up to it. You can purchase a replacement battery for about $10
    iPod Touch Repair – iFixit                  

  • Contacts and Calendar not sync'ing with Outlook 2010

    All was fine today until (maybe coincidental - maybe not) I had a Microsoft Exchange email account added to my Outlook 2010.  I have an iPhone 4, and I usually sync daily, especially when calendar or contact changes take place.  I am currently not using the icloud, so all contacts and calendar events would be way too outdated.
    I have checked my Outlook settings under "info" and cannot get my contacts and address to load.  I even see the "Contacts syncing"..."calendar sync'ing" when the overall iTunes sync takes place with my iPhone.
    Help!!

    Yes, it is. Do you have Desktop Manager v6?
    Download Desktop Manager from here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1296 When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

    When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

    The music sync is one way - computer to iphone.  The only exception is itunes purchases.  File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.  Use your backup copy to move everything to your new computer.

  • Syncing issues with Logic and Akai MPC 1000

    I followed the directions in the manual and even some advice on another forum related to MPC's, but I still keep having problems whether I sync as Logic being Master or Slave.
    When I sync Logic as Master the Tracks are kept in time with each other but they are not syncing to the grid in Logic right. It's a little off even though I set a few blank bars at the beginning of the sequence I wanted to record, and set the the tempo in Logic to the exact same tempo on the MPC. When I go to copy and paste certain bars while arranging it's always off cause the tracks are not in time with the bars in the arrange window. I want the tracks to be in time with the grid so it is much easier to copy, paste and arrange.
    When I try to sync Logic as Slave...I can't even get it to work at all. The transport location just seems to jog in place. The last digits in the transport just keeps repeating themselves but no others, and there is no movement of the play head. It's just stuck. I don't know why it's doing that. When I try to sync Logic as slave I make sure the MPC is NOT in slave mode whatsoever, and that Logic isn't sending (as far as I know) any Master info to the MPC, so I really don't understand why it locks up.
    I'd really appreciate help in getting this sorted out as soon as possible.
    Message was edited by: excLOUsiv

    Ok, so I checked the SMPTE offset. I switched it so it will start at 00:00:00:00 or what have you. Good news is that the play head is no longer stuck. The first time I tried this I got an error message saying "System Overload. The Audio Engine was not able to process all required data in time. (-10011)" after about 8-10 bars of recording.
    Next time I tried this I did I stereo pass of one track and it worked perfect. It recorded the whole sequence and the sync was perfect. It was only that one time. Now I can't even get the empty initial bars to go through without getting that error.
    What is happening with this? I should have a powerful enough computer. I have a 2.2 ghz Intel core 2 duo Macbook pro, 2 gigs of ram, os 10.4.11

  • Syncing Logic and multitrack tape using smpte/mtc

    Hi,
    Has anyone managed to sync Logic to multitrack tape using smpte/mtc without major drift ? If you've tried this, let me know your experience.
    Many thanks.

    Never had a problem with wow and flutter - but I guess it depends on how good the tape machine is. I use a Studer A827, so it's not been an issue for me. I just use striped tape, usually at 15 ips, to record the basic tracks, and transfer a reference mix to PT and/or Logic, and transfer those files to Logic and carry on with overdubs, and only use the 24 track tapes again when it's time to mix. I'm not doing anything complex like sound to picture, or chasing the tape in the rest of the recording, so there may be issues lurking which I don't encounter.

  • Since I upgraded to iOS 7.1.2, new Outlook calendar and contact items will not sync to/from my iOS devices - I am not using the iCloud, just sync'ing direct to/from laptop. Does anyone have a solution?

    Since I upgraded to iOS 7.1.2, new Outlook calendar and contact items will not sync to/from my iOS devices - I am not using the iCloud, just sync'ing direct to/from laptop. Neither direction seems to be working.
    Does anyone have a solution?

    Hello Happy-in-the-Mountains,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where you're unable to sync between your iPhone and Outlook, I'd like you to please follow the steps in the article linked to below.
    Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010 - Apple Support
    Have a great weekend,
    Alex H.

  • Having trouble sync'ing. Receiving Overcapacity error on my 64GB iPhone 5. Backed up and restored but still having sync issues.

    I have an iPHone 5 64GB with iTunes 11 installed on an 2 yr old HP laptop running Windows 7. I am having sync'ing issues. I am receiving an overcapacity error I have not seen before even though I can manually remove audiobooks I have previously loaded to get the overcapacity down below the available 64GB limit. I have removed most of them now and can get the sync to begin. Not sure if it will actually complete. But now I do not have but a relatively few audio books loaded. I have backed up and restored to see it that helps but am still getting the same overcapacity error. Seems whatever I had included was doubled in an "other" category. Also, in the recent upgrade to iTunes, it takes forever to sync when I change content. Sync'ing takes a lot longer than before. Has anyone else experienced similar performance issues.

    Lawrence Finch has previously provided the following helpful info...
    "Other" data is real data that you put on your phone by using the built in apps. It is not music, not videos, not pictures and not App Store app data. It is "OTHER" meaning everything that does not fall into these categories. Such as:
    email messages and attachments
    Reminders
    Calendar entries
    Contacts
    Text messages   (*** this can take up a lot of space)
    MMS messages and attachments
    Genius data
    Music cover art
    Operating system settings
    Safari cache
    bookmarks
    Game Center status
    Music catalog
    If you have a lot of text messages stored, that can make "Other" very large.  Another problem area is corrupted files.  When app and data files become corrupted, they may end up in "Other".  To fix that, perform a restore from a recent backup.  That prevents corrupt files from showing up.

  • My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.

    My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.

    Hello kidmango,
    I am going to have to agree with planb77. Look into other drivers in your computer causing the issue, not just the nano's drivers.
    It is possible that security software is the culprit. Use this:
    iTunes: Troubleshooting security software issues
    You may have to restore your computer to a previous point. From before the issue started. Contact computer manufacture or Windows for steps, or do a search with a search engine.
    I would test the ipod on a known good computer to see if its the ipod is the issue. My gut says no. You can set a reservation at an Apple Retail Store. Apple.com/retail .You can also test a known good ipod on your computer.
    Hope this helps.
    ~Julian

  • HT1386 It's not sync-ing.  It says "sync will resume when (my computer's name) is available.  My computer is on and Itunes are open.  Anyone can help?

    It's not sync-ing.  It says "sync will resume when (my computer's name) is available.  My computer is on and Itunes are open.  Anyone can help?

    Hi Lauren ...
    Try the troubleshooting steps here > iOS: Device not recognized in iTunes for Windows

Maybe you are looking for