My balck is turning up green

my FCP is outputting green in the default black on the timeline. even when i lay down a slug, the video output is green. my canvas shows the green as well as my external monitor. it isn't until i lay down a matte and color it black that it's not green anymore. my video looks fine when i lay it in still, the default black is showing up green. any ideas?

Maybe you could try exporting a pict file from a slug and see if that behaves any better. Also check out fcprescue for a tool that will backup your preferences before deleting. Do a search here or a google to find where to download it from.

Similar Messages

I tried to rent/buy a movie on my ipod touch 3g on itunes, but the rent/buy button just turns light green then goes back the the normal color without renting/buying the movie. Help me?! why is this happening and what can i do to fix it?

okay so i tried to rent a movie but the blue rent button just turned light green for a few seconds and then went back to blue without renting it. it allows music videos to be bought but not movies. the same happens when i click buy .please help! thanks

Have you tried connecting the iPod to your computer and restoring the iPod?

Dispatcher stops after starting SAP and turning from green to grey

After starting SAP on the SAP Console, the dispatcher turns from green to grey and logging on to SAP is not possible. Below is the developer trace file for the process:
SAPPRD\saploc\PRD\DVEBMGS00\work\dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Mar 27 14:47:21 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 3732
***LOG Q00=> DpSapEnvInit, DPStart (00 3732) [dpxxdisp.c 1100]
 shared lib "dw_xml.dll" version 43 successfully loaded
 shared lib "dw_xtc.dll" version 43 successfully loaded
 shared lib "dw_stl.dll" version 43 successfully loaded
 shared lib "dw_gui.dll" version 43 successfully loaded
Tue Mar 27 14:47:34 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0000.qqq.nxst) took 13 seconds
Tue Mar 27 14:47:51 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS
settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 21528 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04BA0040, size: 2520320)
DpShMCreate: allocated sys_adm at 04BA0040
DpShMCreate: allocated wp_adm at 04BA17A8
DpShMCreate: allocated tm_adm_list at 04BA6BC0
DpShMCreate: allocated tm_adm at 04BA6BE8
DpShMCreate: allocated wp_ca_adm at 04DC4B30
DpShMCreate: allocated appc_ca_adm at 04DC9180
DpShMCreate: allocated comm_adm_list at 04DCA8F0
DpShMCreate: allocated comm_adm at 04DCA908
DpShMCreate: allocated vmc_adm_list at 04DF9708
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04DF9730
DpShMCreate: allocated wall_adm at 04DF9738
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2264 blocks reserved for free list.
ES initialized.
Tue Mar 27 14:47:52 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( SAPPRD) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Mar 27 14:48:32 2007
ERROR => W0 (pid 5396) died [dpxxdisp.c 12187]
ERROR => W1 (pid 1536) died [dpxxdisp.c 12187]
ERROR => W2 (pid 5404) died [dpxxdisp.c 12187]
ERROR => W3 (pid 1520) died [dpxxdisp.c 12187]
ERROR => W4 (pid 4208) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3584) died [dpxxdisp.c 12187]
ERROR => W6 (pid 4512) died [dpxxdisp.c 12187]
ERROR => W7 (pid 5484) died [dpxxdisp.c 12187]
ERROR => W8 (pid 5488) died [dpxxdisp.c 12187]
ERROR => W9 (pid 5500) died [dpxxdisp.c 12187]
ERROR => W10 (pid 888) died [dpxxdisp.c 12187]
ERROR => W11 (pid 5512) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W12 (pid 5520) died [dpxxdisp.c 12187]
ERROR => W13 (pid 5528) died [dpxxdisp.c 12187]
ERROR => W14 (pid 5532) died [dpxxdisp.c 12187]
ERROR => W15 (pid 5536) died [dpxxdisp.c 12187]
ERROR => W16 (pid 5468) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W17 (pid 5564) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W18 (pid 1676) died [dpxxdisp.c 12187]
ERROR => W19 (pid 5652) died [dpxxdisp.c 12187]
ERROR => W20 (pid 4704) died [dpxxdisp.c 12187]
ERROR => W21 (pid 1796) died [dpxxdisp.c 12187]
ERROR => W22 (pid 5568) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W23 (pid 6084) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W24 (pid 5704) died [dpxxdisp.c 12187]
ERROR => W25 (pid 3580) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5396 (SIGUSR2)
ERROR => DpWpKill(5396, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-1536 (SIGUSR2)
ERROR => DpWpKill(1536, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-5404 (SIGUSR2)
ERROR => DpWpKill(5404, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1520 (SIGUSR2)
ERROR => DpWpKill(1520, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-4208 (SIGUSR2)
ERROR => DpWpKill(4208, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3584 (SIGUSR2)
ERROR => DpWpKill(3584, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-5484 (SIGUSR2)
ERROR => DpWpKill(5484, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-5488 (SIGUSR2)
ERROR => DpWpKill(5488, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-5500 (SIGUSR2)
ERROR => DpWpKill(5500, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-888 (SIGUSR2)
ERROR => DpWpKill(888, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-5512 (SIGUSR2)
ERROR => DpWpKill(5512, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-5520 (SIGUSR2)
ERROR => DpWpKill(5520, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-5528 (SIGUSR2)
ERROR => DpWpKill(5528, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-5532 (SIGUSR2)
ERROR => DpWpKill(5532, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-5536 (SIGUSR2)
ERROR => DpWpKill(5536, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-5468 (SIGUSR2)
ERROR => DpWpKill(5468, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-5564 (SIGUSR2)
ERROR => DpWpKill(5564, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-1676 (SIGUSR2)
ERROR => DpWpKill(1676, SIGUSR2) failed [dpxxtool.c 2468]
killing W19-5652 (SIGUSR2)
ERROR => DpWpKill(5652, SIGUSR2) failed [dpxxtool.c 2468]
killing W20-4704 (SIGUSR2)
ERROR => DpWpKill(4704, SIGUSR2) failed [dpxxtool.c 2468]
killing W21-1796 (SIGUSR2)
ERROR => DpWpKill(1796, SIGUSR2) failed [dpxxtool.c 2468]
killing W22-5568 (SIGUSR2)
ERROR => DpWpKill(5568, SIGUSR2) failed [dpxxtool.c 2468]
killing W23-6084 (SIGUSR2)
ERROR => DpWpKill(6084, SIGUSR2) failed [dpxxtool.c 2468]
killing W24-5704 (SIGUSR2)
ERROR => DpWpKill(5704, SIGUSR2) failed [dpxxtool.c 2468]
killing W25-3580 (SIGUSR2)
ERROR => DpWpKill(3580, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:42 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Mar 27 13:48:42 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action
 Table
0 DIA 5396 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 5404 Ended no 1 0 0
3 DIA 1520 Ended no 1 0 0
4 DIA 4208 Ended no 1 0 0
5 DIA 3584 Ended no 1 0 0
6 DIA 4512 Ended no 1 0 0
7 DIA 5484 Ended no 1 0 0
8 DIA 5488 Ended no 1 0 0
9 DIA 5500 Ended no 1 0 0
10 DIA 888 Ended no 1 0 0
11 DIA 5512 Ended no 1 0 0
12 UPD 5520 Ended no 1 0 0
13 UPD 5528 Ended no 1 0 0
14 UPD 5532 Ended no 1 0 0
15 UPD 5536 Ended no 1 0 0
16 UPD 5468 Ended no 1 0 0
17 ENQ 5564 Ended no 1 0 0
18 BTC 1676 Ended no 1 0 0
19 BTC 5652 Ended no 1 0 0
20 BTC 4704 Ended no 1 0 0
21 BTC 1796 Ended no 1 0 0
22 BTC 5568 Ended no 1 0 0
23 SPO 6084 Ended no 1 0 0
24 UP2 5704 Ended no 1 0 0
25 UP2 3580 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 27 13:48:42 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue Mar 27 13:48:42 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T26, U27, , SAPPRD, 14:48:24, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Tue Mar 27 13:48:42 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:47 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1844) (SOFT_KILL)
Stop icman
killing process (5376) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 26
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
return errno (-17) to T26
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T26 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1216
dp_tm_adm[26].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1175003332
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 26
DpListInsert: insert elem 26 into tmadm_free_list (at begin)
DpListInsert: 175 elems in tmadm_free_list
DpListRemove: remove elem 26 from tmadm_inuse_list
DpListRemove: 26 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:1844 HANDLE:1500)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1844 HANDLE:1500)
[DpProcDied] Process died (PID:5376 HANDLE:1492)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'SAPPRD'
AdGetSelfIdentRecord: >
 <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >
 <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1504
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3732) [dpxxdisp.c 8495]
Good Bye .....

what is the name of your hostname? 'pun-idmqa-vm1'?
Try changing the hostname for another one with 8 characters...
good luck,

Web Service - Request never turns to GREEN

Friends,
I have created Web Service Source System followed by Data Source and did the required setting in Web Service Admn screen (WSADMIN) and could able to generate/publish WSDL and able to see that PSA getting the records with trigger of web service.
My concern is, after creating the Web Service Data Source, I did create the "Scheduler: InfoPackage for Real-Time Data Acquisition (Push)" and set the "Automatic Closure of the Request" (in Processing Tab) to "1 Hour". I am able to see that system is creating new Request for all the transaction triggered in that particular Hour but it is NOT setting the previous Requests to GREEN (So that the PSA data couble us triggered to ODS)..
That means, all the Requests (which are getting generated every hour) are in Yellow status.. how to turn them Green (Automatic)..? Is that anything I am missing here..
Please let me know if you have any thoughts..
Thanks
Mavip

Heres the correct answer-
Rationale -
When you transfer data using a Web service or real-time data acquisition (using a SAPI and a Web service), the InfoPackage requests (also called PSA requests) remain open across several load processes.
The requests are closed when the threshold values set in the InfoPackage are reached. The system opens new requests and data transfer is continued using the new requests. With process type Close Real-Time InfoPackage Request, you can close an open PSA request before the threshold value is reached.
This means that you can use a Web service to send data to the PSA in BI and then use the standard scheduling process to update it further.
You can close requests in this way to perform regular analyses at set times on an InfoProvider that is down stream of a DataStore object that you are using for real-time data acquisition.
Procedure -
1. In the process chain, choose process type Close Real-Time InfoPackage Request.
2. On the next screen, enter a technical name for the process variant and choose Create.
3.On the next screen, enter a description for the process variant and choose Continue.
The maintenance screen for the process variant appears.
4.In the table, select the InfoPackage for which you want to close a request.
5.Choose Save and go back.
PS -
Do not schedule this process to take place more frequently than once an hour. Otherwise performance is affected. If you schedule the process to take place more frequently, it is possible that the system will generate so many requests that performance is affected.
Result
When the process chain is run, the system closes the PSA request, as well as the DTP and change log request, if they exist.

CDC - clock icon does not turn to green from yellow after starting journal

Hi,
I am going through the following steps for my datastore for the CDC concept:
1. created a datastore.
2. Selectively reversed a table into it.
3. difined a simple journalizing mode and JKM oracle simple.
4. Right clicked on the data store , in that change data capture -> subscribe - > SUNOPSIS.
5. Right clicked on the data store , in that change data capture -> Add to CDC.
6. Right clicked on the data store , in that change data capture -> Start Journal.
In the Operator , i donot get any warnings or errors after i start the journal.
I have refreshed my Designer also.
But the clock icon is not turning into green from yellow.
I tried this for other datastores and tables too. Still the clock icon doesnot turn green.
Due to this iam not able to get any journal data.
Please help me with this issue.
Thanks
Divya aggarwal

Dear Sutirtha & Brice,
CDC is working fine for my source table now. Thanks for your help.
But now I am having issue with the Integration flow table.
I have created and interface with the journalized table as my source which is defined in one schema and target table which is defined on other schema.
I have kept staging area different from target.
The KMs which I am using are :
Source table - LKM SQL to Oracle: Source to Staging
Staging table - LKM SQL to Oracle: Staging to Target
Target table - IKM Oracle incremental Update - Common
I am using the default option values for these. Especially the detection strategy in the IKM is "<Default>:Not_Exists.
Now the issue is that my updated record of sorce table is getting inserted into the journal table and also into the work table at target schema side.
But that record is not getting inserted into the flow table , as a result of this that updated record at source is not getting updated in my target table from the flow table.
The package which I am executing is getting executed without any errors. Please guide me for the flow table issues.
Thanks & Regards,
Divya Aggarwal
Edited by: 784414 on Nov 25, 2010 11:32 PM

Phone used for nearly a year and recently pics taken by rear camera are all turned into green but front camera worked fine, any clue?

pics took by rear cam all turn to green but front cam normal, please advise?

You can't do anything to get service in your country by Apple, the warranty is only valid in the country where the phone has been bought.
If you can't bring it back to the USA, you'll have to get it checked by an experienced 3rd party repair shop, but this will void the warranty, and Apple will not service the device anymore, even if you want to pay for it.

How do I fix it when Facetime freezes,shakes, then turns to green?

How do I fix it when Facetime freezes,shakes, then turns to green?

The memory that is low is the processor memory, not the overall storage space. Next time, before you go to that site, double tap the home button to see the task bar. You will see the list of apps siting in the recently used list. Most of them are not doing anything, but some of them are using up memory. Touch and hold any one of them until they jiggle, then close them all off by touching the minus sign.
Do that every so often to help the pad use it's memory wisely.
Some apps, and browser pages use a lot of memory, and do not give it back easily, causing what sis happening to you.
You can also get a similar result by rebooting. Press and hold the home and sleep buttons until the apple logo appears, ignore the red slider.

Server in sap management cosnole does not turn into green

I installed this trial version from http://www.sdn.sap.com. with the download, there is a tutorial explaining all steps for installation. In SAP Management Console when I click on NSP "Start" it should change to green but in my case it stays yellow.
I do not have an access key to the server. When I try to log on to this server it asks me for user and a password so I tried to use nspadm with it's password but it did not accept.
as far as i know that in order to let the server turns to green all I need to do is to right click on it and choose starts but even after doing this it does not turns into green.
I want to create another user in order to user it instead of SAP*
The role that I am giving to this user is u201Csystem administratoru201D but after I save it I get this message on screen: u201CNo update server found for Eu201D
despite of this previous message it creates it. I get this if I create a new user with the previous name I wanted to create previously.
In general I need a way to let me create my own users so I can start developing in ABAP.
I can access every thing in this workbench but if I want to do some changes on classes and packages I create it tells me that I can not using SAP* and if I want to create other users sing SU01 and then logon again using using these new users I get a problem in accessing the system using them.
I need to know what is reason for not turning the server in sap management console into green and i why i can not create users.
Thanks
Amal

Dear Vincent;
this is what i got from "Developer Trace" for "disp+work.EXE"
trc file: "dev_disp", trc level: 1, release: "720"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 70
intno 20020600
make multithreaded, Unicode, optimized
profile
amal-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_amal-PC
pid 976
Mon Oct 10 17:01:10 2011
kernel runs with dp version 129000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC)
length of sys_adm_ext is 588 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 976) [dpxxdisp.c 1268]
shared lib "dw_xml.dll" version 70 successfully loaded
shared lib "dw_xtc.dll" version 70 successfully loaded
shared lib "dw_stl.dll" version 70 successfully loaded
shared lib "dw_gui.dll" version 70 successfully loaded
shared lib "dw_mdm.dll" version 70 successfully loaded
shared lib "dw_rndrt.dll" version 70 successfully loaded
shared lib "dw_abp.dll" version 70 successfully loaded
shared lib "dw_sym.dll" version 70 successfully loaded
shared lib "dw_aci.dll" version 70 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Mon Oct 10 17:01:15 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6393]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >amal-PC_NSP_00 <
DpShMCreate: sizeof(wp_adm) 20000 (2000)
DpShMCreate: sizeof(tm_adm) 4323912 (21512)
DpShMCreate: sizeof(wp_ca_adm) 32000 (64)
DpShMCreate: sizeof(appc_ca_adm) 32000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/556056/556064
DpShMCreate: sizeof(comm_adm) 556064 (1104)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (1792)
DpShMCreate: sizeof(wall_adm) (40056/34360/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3920
DpShMCreate: SHM_DP_ADM_KEY (addr: 09620040, size: 5055296)
DpShMCreate: allocated sys_adm at 09620048
DpShMCreate: allocated wp_adm_list at 09622F28
DpShMCreate: allocated wp_adm at 09623020
DpShMCreate: allocated tm_adm_list at 09627E48
DpShMCreate: allocated tm_adm at 09627E70
DpShMCreate: allocated wp_ca_adm at 09A478C0
DpShMCreate: allocated appc_ca_adm at 09A4F5C8
DpShMCreate: allocated comm_adm at 09A572D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 09ADEEF8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 09ADEF50
DpShMCreate: allocated j2ee_adm at 09ADEF88
DpShMCreate: allocated ca_info at 09ADFEE0
DpShMCreate: allocated wall_adm at 09ADFEF8
DpCommAttachTable: attached comm table (header=09A572D0/ft=09A572D8)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Mon Oct 10 17:01:16 2011
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=159 reserved=47 quota=10%
Mon Oct 10 17:01:17 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1654]
Mon Oct 10 17:01:22 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1755]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpAppcBlksLow: max appc blocks in queue is 250 (50 %)
DpWpBlksLow: max wp blocks in queue is 400 (80 %)
Mon Oct 10 17:02:07 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Mon Oct 10 17:02:27 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
this process "disp+work.EXE" is still yellow

Images turning yellow/green

I am running Aperture 3.1.3 on 10.6.8 and importing camera RAW from a Canon 60D. I've been working fine with Aperture for about a year, but when I started opening images in a folder for the third or forth time since I imported them yesterday, they are turning dark green, one by one. They look fine during the load, but once it completes, it's like the bottom drops out of the gamma.
I found a post suggesting I remove a few plists -- I tried moving the only one I found, but no luck (and all the Adjustments panels have now disappeared). I had made no adjustments to the image but I reset them all anyway; no change. Reopened Aperture, the adjustment panel is still empty. At first the thumbnail remained the normal color, now it too is dark green.
I'm afraid to open any other images.
Any one had this problem or found a solution? Borderline desperate here...

Just a note: Quick Preview is not enabled, and when I click Show Master, I a "Missing Adjustments !" message is displayed (for some reason I'm not able to upload a screenshot).

Turn off green isight light??

is there a way to turn off green isight light?? i want to b able to have it off when i record sometimes is there a way?

cover the light with white tape or somethink?? i need to get my iphoto working not turing it off tho other than that there is no way you can as there are privacy issues with "covert ops"
Matt

My iMac turns on and about 10 mins later it glitches and freezes and then the screen turns blue/green/white

My iMac turns on fine, but about 10 minutes later I can't use the mouse as the whole thing freezes. Sometimes it continues to move the mouse for a while but then glitches the screen (see first image). After that my screen turns blue/green/white and even purple as a solid colour (second image - changes to a different colour). I'm wondering what the problem is and can I fix it myself?

I have a similar iMac.
1. Be sure you have 4 GB of RAM.
2. Create a new USER wih Admin Rights
3. Don't add anything to the start up sequence.
4. Update all your apps. This is a big problem. Do it.
5. Use Font Book and verify your fonts. Delete any broken fonts.
6. Download and install Applejack. If you have to force a restart, press and hold command s. A black screen will appear. Finally it will say something about Applejack. Type applejack and run #1 and #2. Restart.
Don't run Applejack outside of safe mode. (Command s)
Come back and let us know how it is working.
;-D
DL Applejack: https://www.macupdate.com/app/mac/15667/applejack

PE preview pane keeps distorting pics and turns everything green

I recently upgraded to photoshop and premier elements 8. I have been having problems with the preview pane in premier turning all the photos green (as if there is a green filter on top of the photos. Has anyone got any suggestions? I can't figure out why it is doing this. The photos in the organizer look fine as well as the filmstrip view on the bottom. It only happens when I run the preview. If I click on the photo in the preview pane, the green goes away and the photo looks fine.

It does seem like your question is specifically a Premiere Elements question, rather than Photoshop Elements.
There is a separate Premiere Elements forum at http://forums.adobe.com/community/premiere/premiere_elements and I recommend that you post there.

Three Way Color Corrector: turn off green clipping info in program monitor???

How can I turn off the green indicator in the program window, that highlights my blacks that contain no image information. I applied a three-way-color corrector via an adjustment layer. Many thanks!

Hi Joe,
I am running on a MacBook Pro, OSX 10.8.3, my graphics card is:
Chipset Model:          Intel HD Graphics 3000
Type:          GPU
Bus:          Built-In
VRAM (Total):          512 MB
Vendor:          Intel (0x8086)
Device ID:          0x0116
Revision ID:          0x0009
gMux Version:          1.9.23
I shot on a flat picture profile with a Nikon D800 and played with the input levels in the 3-way-color corrector. Again, if I brighten the whole image, these indicators will disappear; if I darken the image, they will grow. It is not an artefact, it is a way to show me my crushed blacks. Like a zebra function in cameras. I just cannot find a way to turn this off.
Thanks again,
Carl

White text turns light green in Kindle App in iPad 3

I am reading a book in the Kindle app with the black background and the white letters. After 10 minutes of reading, the letters turn from white light floresent green. Very pretty, but not what it is suppose to do. Anyone seeing this?

To the best of my knowledge, the Kindle app does not support Text-To-Speech.
Regards.

IMessage sent in blue, turns to green?

I've had a situation occur several times now. While chatting with another user who's using iOS5 messages sent via iMessage appear as blue and the SEND button is also blue.
However, recently I have had it happen where my SEND button, though it appears blue on my phone might be sending out messages that actually get sent as ordinary text (read, pay for this message!) messages and not the "free" iOS5 message type. Instead of the "delivered" subtext below the text bubble (normally in blue) I instead get a text bubble in green that contains the sent message and a subtext that says "Sent as Text Message".
Does anyone have any idea why this might be happening or how to prevent ANY green messages from going through? (On my plan I have to pay for each text message and don't pay a monthly fee for texting because I don't really use it.)
Does it have something to do with the other person's phone being turned off maybe?

Robert Grandmaison wrote:
I
Does anyone have any idea why this might be happening or how to prevent ANY green messages from going through? (On my plan I have to pay for each text message and don't pay a monthly fee for texting because I don't really use it.)
Does it have something to do with the other person's phone being turned off maybe?
Hi Robert
Annoying, isn't it?
On your lock screen (or wherever) choose 'settings', then 'messages'.
You will see a check box ''Send as SMS''. Change this status to 'off''.
Now your system will wait until it can send it over the imessage system.
Good luck
Max

My balck is turning up green

Similar Messages

Maybe you are looking for