My battery died, I charged phone now black screen apple logo blinking. How do I fix?
My battery died, I charged phone now black screen apple logo blinking. How do I fix?
If Apple replaced the battery, contact them to check the phone, the battery replacement is covered by a warranty.
iPhone - Contact Support - Apple Support
Similar Messages
-
I let my phone dry out in rice for over a week. I see it turn on but the screen is black. If you hold it to a light you can see the Apple logo. How can I fix this?
It depends which country you are from below is US
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne -
I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?
Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
My iphone went dead and now has the apple logo blinking on and off
my iphone 4 went dead and now has the apple logo is slow blinking on and off when it's plugged into my computer. I cannot stop it. Tried a hard restart but nothing happened.
Morning blgarratt,
Thanks for using Apple Support Communities.
If it is showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
For troubleshooting on this, take a look at this article:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Hope this helps,
Mario -
hello, my iphone 5 battery was dead yesterday and the device turnd off completey, by the time i went back home to charge the phone, only the apple logo were showing on the screen and thats it.. it been now more than 8 hrs! plz help me
i tried to connect it into my mac but iTunes didnt read it..
i press all the bottem and i followed many youtube vedios, but its not turning on..
what shall i doTurn your phone off, then force it into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
My ipod touch has a totally black screen and is unresponsive, how do I fix it?
Long story short, my 3rd generation touch is completely unresponsive: black screen and everything. I've tried resetting, no go. Still black. I've tried charging, no go, still black. I can't even reset it because windows doesn't detect it when it's plugged in.
I worked fine an hour previous to its unresponsiveness.
How can I fix this?If not successful try the remaining items of:
iOS: Not responding or does not turn on
If not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I did a factory reset on a droid charge, and now i have no network service , how can i fix this?
my droid charge locked in airplane mode,so i factory reset it, now when i try to get it working again, there is no service.
Try removing the SIM card, turn phone off, then reinserting it and powering the phone back on.
-
HT4061 phone wont turn on apple logo blinks when plugged in
My phone will not turn on
ok? does it show a USB cable at all?
If not- try a hard reset. Press the top power button, an the hom button- both at the same time unti you see an apple appear and then let go. Your phone will then restart.
(do not have it plugged in wile you do this)
If it gives you any errors or solves your problem, please write back and let us know. -
hi, i woke up nd my device will not turn on . ive tried the home and unlock button, my phones on a charger also but the battery wont pop up. just a black screen. What do i do ?
Leave it alone for an hour and try the reset procedure again. Make sure you're using a genuine Apple charger & cable in a known good wall outlet. You can also try another cable if necessary, and make sure the charging area is clean and free of fluff & debris.
-
After upgrading my iPad will do nothing except refuse to take a charge display a black screen or a battery red line or the occasional apple logo. Have tried soft boot and hard boot and nothing!,!
Hello there, Victoria.
Great job on troubleshooting on your own. The following Knowledge Base article offers up some great steps to review and additional recomendations:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Why is my iphone 5 battery dying even with phone turned off ?
Why is my iphone 5 battery dying even with phone turned off ? Even when my phone is fully charged and I turn it off when I turn it back on the battery is drained. Why ?
Completely drained when turning the iPhone on after being off?
All lithium-ion batteries lose some charge when the computer or device is powered off.
If the battery is entirely depleted after the iPhone is powered off with a fully charged battery at the time, something is wrong - unless powered off for a number of weeks or months. -
I flashed the BIOS on my dv4 2045dx with the F17 BIOS, NOW Black screen, PLEASE HELP
I flashed the BIOS on my dv4 2045dx with the F17 BIOS, NOW Black screen. Now even when pressing the windows and the B key when powering, the screen stay black. Lights, fan, HD, USB drive with HP_TOOLS partition and bios backup flashes goes on for some time with some beeping every 15 sec.
I try to plug it on to a external monitor without luck.
What's next? Can I reload a BIOS from a CD? Anyone have an idea?
ThanksHello KenyaKitten
I understand after flashing your bios the PC will not boot. I will do all I can to help with this issue.
First thing let’s do a hard reset, remove all devices from the PC including battery and power cable. Once all is removed press and hold power button for 15-20 seconds. Once that is done insert only battery and charging cable. Try to boot now, if getting same response move to next line below.
Next, I want you to try is to boot into the bios menu. Turn the PC off and as you turn it on tap the F10 key repeatedly. Hopefully this boots you into the bios menu. Screen will look a little bluish grey and have setup utility across the top.
Also if the PC starts beeping at you while you’re tapping you can stop. Now if you reach that screen you may get a box that say save changes and exit choose no. (Note your mouse doesn't work on this screen so you would need to use the arrow keys)
After that press F9 another box will up come about reset defaults, accept that. Then press F10 to save and exit. The notebook will attempt to boot.
Also please inform me if you notice the number lock or caps lock keys blinking off and on. Also please let me know if the PC beeps at you while tapping F10 regardless if the bios comes up or not.
Please respond at your earliest convenience when you get further information.
Thank you.
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
So I charged my phone yesterday but it didn't seem to get charged because the battery percentage went lower instead of higher after I plugged out my phone. Then the battery percentage subsequently got lower even faster, jumping from 28% to 15% within ~a minute. It was very hot too, so maybe overheating was the problem. Then I tried charging my phone again after leaving it to cool but it won't charge and keeps flashing the Apple logo.
I've tried to no use:
1. pressing the Power button and Home button together for a long time
2. restoring my device (on iTunes it says that my phone's updated, but it still won't turn on)
Should I just send my phone to Apple for them to fix it or for a replacement?I'm sorry, it seems that the problem is that my phone WON'T restore. I just tried restoring again and it keeps giving me the 2001 error. Help.
-
I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .
Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out. -
My iPhone 3 is not seen on iTunes when I connect it. It is also showing low battery but is not even charging and continously showing the Apple logo... What should I do? Thanks in advance, Jahnavi...
Jahnavi,
two things to be looked upon in this case. First thing is about the battery. Once the battery has enough charge in it we can try a force restore on the phone to re-install the iOS.
> Try a hard reset of the phone (Press and hold the HOME button and the Sleep/Wake button until the phone restarts and comes up with Apple logo). After trying this step, try charging the phone and see if the battery holds the charge.
> Once battery has enough charge in it then we can force it to DFO mode and perform restore. For restore refer to this link.
Maybe you are looking for
-
Error while publishing the message to queue
Hi , I am trying to run an example code . But i am getting the following error... I tried to search all the topics but i didnt got the answer. Following is the error :- Error in performJmsOperations: oracle.jms.AQjmsException: ORA-06550: line 1, colu
-
How would I be able to view dvd's I burned with my older Imac w/10.5 on my current imac w/10.7.5?
-
I am getting a strange error that happens only in the debugger. The regular flash player itself has no problem running .swf but the debugger throws a type coercion error. Before this I had issues with security, and external files couldn't be loaded c
-
Settings for 2-sided printing on a ENVY 7645
Will not 2-side printing with the setting on 2-sided?
-
Hi Everyone, I have just brought a pearl 8110 yesterday and have been installing software on it like Google maps, Google mail, etc but the problem is certain programs won't launch (Google maps) freezes blackberry. Also none of the applications seem t