My battery died last night and the phone switched itself...
My battery died last night and the phone switched itself off. It has now been charging for 5 hours and still will not switch on. Please help.
Remove and reinsert the battery from the device. Also clean the battery and device connectors with a cloth....then plug the device on the charger.
If that fails then you might have to consider changing the battery.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit
Similar Messages
-
I lost my iphone 4S last night and the phone is switchwed off . what shud i do to recover it ????
i lost my iphone 4S last night and the phone is switchwed off . what shud i do to recover it ??? its status shown offline at find my iphone and it unable to activate lost mode as it is switched off . what shud i do to locate or recover it ? plz help me
If your missing device is off or offline, you cannot located it, however, you can still put it in Lost Mode, lock it, or remotely erase it. The next time your device is online, these actions will take effect.
As for the data on the iPhone, if you have backed up the iPhone with iTunes or iCloud, you can use the iPhone backup extractor to extract the data from the backup files to your computer, or restore the found data to a new iPhone with the help of iPhone PC Suite. -
My Iphone died last night and efforts to recharge this moring have been unsuccessful, so what next?
Keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to start. Can take about 20 seconds of holding both buttons while on charger.
-
Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.
Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
If you cannot open System Preferences you can reset your system date and time using Terminal.
Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
Open Terminal - it is in your Utilities folder and looks like this
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
At the prompt, you will be typing a command resembling the following:
sudo date mmddhhnnyyyy
... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
Substitute numerals in the above command according to the following:
mm = month
dd = date
hh = hour (24 hour format)
nn = minutes past the hour
yyyy = year
Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
sudo date 020821002014
or
sudo date 0208210014
Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time. -
When I plug it into my computer nothing happens.
Try SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
If no success, then you may have to see the people at the 'crappy' store.
Ciao. -
My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?
How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.
-
I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?
Plug it into power for at least 15 minutes. If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont have a clue what to do. How should I fix this problem because I cant turn it back on? I have only had my phone for 2 months.
I also live an hr away from the Apple store, so its not the best thing to go there just to ask a question and find out what to do
-
My ipohn 4 died last night and wont turn on pls help me
my ipohn 4 died last night and wont turn on pls help me
Hi Punkermama,
If the screen on your iPhone is dark but the phone otherwise seems to be responding (sounds, etc), an Accessability feature known as Screen Curtain may have inadvertently been activated. You may find the following section of the iOS 7 for iPhone manual helpful (Apendix A - Accessability, in the Voiceover section on pg 126):
Turn the screen curtain on or off. Triple-tap with three fingers. When the screen curtain is on, the screen contents are active even though the display is turned off.
iPhone User Guide For iOS 7
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Regards,
- Brenden -
Hi I tried to install ios7 last night and the ipod touch now has a frozen screen with the itunes logo and the usb logo I plugged the ipod into my laptop and tried to restore only to be met with the message 3194 error cannot restore this ipod please help thanks
Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2 -
I made an iMovie last night and the video is in my library but it won't let me play it or edit it?? Help Please
Contact iTunes support at the link below.
https://ssl.apple.com/emea/support/itunes/contact.html -
when im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.
You must have a valid form of payment for the app store in the country you are using. Most app stores are separate legal entities to comply with local laws. It is possible to have an account without a credit card, however; see: http://support.apple.com/kb/HT2534
-
I updated my iPhone 4S last night and it is locked up on a screen with the iTunes emblem and the iPhone cord pointing upwards toward it. When I hook it to the computer, it's telling me that the phone is in recovery and I need to restore it. That will erase everything in my phone. What do I do? I can't use my phone for anything.
Use iTunes on the computer to restore your iPhone. Since the iPhone
is already in recovery, any data that was on the iPhone is gone. -
Appeaers a message that battery is too slow and the phone turns off
When the battery is yellow since today appears a massage saying that the battery is too slow and the cellphone turns off! Whats going on? Before, it could have the battery in red buy never turned off :s i need help please. Ah! The emails are taking hours to arrive! I have the 9300 and im too upset!
This tends to indicate some rogue app running in the background or an email stuck in the outbox constantly trying to send.
Reset the device by pressing and holding the home and power buttons until the white Apple logo appears.
Check the outbox for all email accounts configured on the device to ensure no messages are "stuck". -
I updated to IOS 6 last night and my phone won't turn on
I know the update finished last night, but when I woke up my phone wouldn't turn on... what can I do?
Never mind. Turns out the update somehow sucked all the battery out.
Maybe you are looking for
-
Flash CS3: AS3 - ReferenceError #1065 Variable is not defined
I have developed several actionscript classes. Two of these classes are associated with MovieClip objects in the library. The MovieClips have their Linkage Base Classes set to their respective package and class locations and when I check the Linkage
-
HST6i, Client/Server env. Forms runtime crash!
We successfuly instaled HSD6i on Forms Server. But we also need to run forms on client/server environment. When I start HSU or generated app. in Forms Runtime (ver 6.0.8.11.3) and do nothing other than navigate from menu to form 'Users' for example,
-
Hi Gurus, Can anyone let me if there is any standard report to specify the consigned vendors current price compared to last price paid for. I have gone through the standard TCODE ME1P. But it is not displaying the price history for the CONSIGNMENT st
-
Why Aperture 3.0 takes that long to soften one simple RAW picture?
Hi, I just have aperture 3 installed and found one simple action such as soften skins in one NEF file takes several seconds to 'processing'. i just got a new macbook pro, 371 last week, which should be powerful enough, I thought to run program like a
-
Crystal Enterprise 8.0 does not work after installing CR 2008 Runtime
We have a client that uses Crystal Enterprise 8.0. Their client machines no longer work after they install the CR 2008 Runtime (required by our software). Error: No such interface supported showreportscripts.js Code:0 Does anyone know what might be