My Battery Icon will not move!

My iPhone 3G is less then a month old & starting yesterday my battery icon will not move at all. It will show my iPhone as fully charged even though it is not & i have been using it all day. This is terrible because i can't ever tell when my battery needs to be charged. Is this common? How can i go about fixing this?

Thank you guys, hopefully this isn't going to be something i have to do on a regular basis. Another question, when i shake my phone close to my ear i can hear a slight rattle inside my phone. I don't recall hearing it when i first got it but then again i never tried to listen. Is it the Accelerometers inside my phone? Is it normal to hear it? It's not a crazy rattle but you can clearly hear something inside moving around. Is this something i should be worried about? My phone works fine except for the battery icon thing but i'm still worried by the noise. I have the apple protection plan...

Similar Messages

  • My wifi icon will not move over on ipad2

    my wifi icon will not move over on ipad2

    Thank you guys, hopefully this isn't going to be something i have to do on a regular basis. Another question, when i shake my phone close to my ear i can hear a slight rattle inside my phone. I don't recall hearing it when i first got it but then again i never tried to listen. Is it the Accelerometers inside my phone? Is it normal to hear it? It's not a crazy rattle but you can clearly hear something inside moving around. Is this something i should be worried about? My phone works fine except for the battery icon thing but i'm still worried by the noise. I have the apple protection plan...

  • IPad app icon will not move across rows

    iPad model A1460 iOS 7.0.4.  There seem to be strange touch-related problems.  Difficult to describe all the issues, however, the following is very consistent:
    1.  On main menu screen, second or subsequent screen, touch an hold an icon, goes into edit mode.
    2.  Icons on the top row cannot be moved off of the top row.
    3.  Icons on a row other than the top row cannot be moved to the top row.
    This behavior is consistent. It is impossible to group icons into folders if an icon is on the top row.  The icon will pick up, but as it is slid either off the top row (or onto, as the case may be) it simply detaches from the finger touch and slides back into position.
    The other strange behavior is similar, and is usually in an App.  A touch will not be recognized and must be repeated numerous times.  This seems like it might be in certain regions of the screen, but it must vary due to context, as the regions seem to move.  An example of this mught be that it is impossible (sometimes) to select the first word or words in a Notability document.
    Any ideas?  The iPad 2 I use has never displayed these behaviors.  The misbehavior is consistent across users.  It does seem to be worse in iOS 7 than in iOS 6, by the way,  but it has always exhibited some strange behaviors in this regard from "day one."

    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if issue persists back up and restore as new via iTunes
    Peace, Clyde

  • My IPhone has been charged for at least 3 hours still showing the low battery icon and not turning on, normally when my phone is in low battery it will automatically pop up the apple icon but now it's not turning on :( someone pleaseeeee help me!

    My IPhone has been charged for at least 3 hours still showing the low battery icon and not turning on, normally when my phone is in low battery it will automatically pop up the apple icon but now it's not turning on someone pleaseeeee help me! Thanks!

    Hi Windy08,
    If you are having an issue with charging your iPhone, you may want to start your troubleshooting with the steps in this article -
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • NB550D - battery icon does not always reflect the proper balance of time

    I have just recently purchased an NB550D and I must say that at the outset I am very happy with it. It does tend to be a bit slow but I can live with that.
    My problem however is that the battery icon does not always reflect the proper balance of time. For instance after a full charge it may show 9 hours remaining but after a shutdown and restart it will may show 75% and 3 hours remaining. If I shut down and restart it may show 75% and 6 hours remaining
    When I first started the unit I allowed it to fully discharge (through use) three times as was suggested by the salesman at the store but quite candidly it doesn't seem to have made one scrap of difference!
    Any advice will be appreciated.
    Regards

    Remaining time is not credible value of the battery state - it depends on actual duty of processor and the program wich estimates this sometimes shows wrong that time or corrects this after a while. Percentage of charge of battery is much better factor to use!
    But in case your battery loses from 95% to 75% after restart indictates that's something wrong with the battery or program... In my NB550D after restart (pause for 1 day) the battery loses only 2-3% .

  • No sound unless headphones attached and headphones icon will not go away.

    I have a really weird problem with my Rezound.  After a month of stellar performance, all of a sudden the headphone notification icon will not turn off but the headphones are not attached.  As a result, the phone appears to think that the headphones are still plugged in (when they are not) so I get no sound unless I use speakerphone. 
    The weirdest part of this issue is that when I do plug headphones into the phone, it tries to call someone.  Anyone know how to fix this?

        Hello RandywinWV!
    We definitely don't want your phone to think it has a ghost headset plugged in! I will be more than happy to provide some suggestions!
    Try leaving your headset plugged in and pull the battery out while the headset is in and the phone is off. Remove the headset and put everything back together.
    Check if there's anything in the headset jack, such as debris. You can use canned air to clean the ports of your device, similar to a computer.  Please just be careful.
    Try putting your phone in safe mode to see if it's an application causing the problem. You can follow these steps: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=48353
    Keep us updated!
    Thanks,
    MelissaM_VZW
    Follow us on Twitter @vzwsupport

  • Satellite L350 - Cursor will not move

    My L350/L350D cursor will not move from middle of screen after boot up. All is good with system just with display sreen & icons.
    Ideas please.

    Hi
    Im also a little bit confused the cursor can be moved either using the touchpad or USB mouse.
    If the touchpad cannot be used, please check if its not disabled.
    As mentioned by PinkPanther, the function FN + F9 enables and disables the touchpad.
    But the cursor could be moved using mouse connected to USB ports.
    So even if the touchpad is disabled, the USB mouse should control the cursor.

  • In Thunderbird while trying to move conversation results to an archive folder; if some of the results are already in the folder it will not move any.

    Hi. I often use the conversation search option when archiving my emails from inbox. I find this a very useful method of finding trails where I and multiple people have responded to each other. However If I have already moved one or more of these emails into the archive folder and select all to move, Thunderbird will not move any. I then need to individually select those that need to be moved.
    Although not a major issue I use this regularly and often come across the problem. a recent fix which allows location tab to remain on in search helps but does not resolve this issue. A slightly annoying problem and I was wondering if any one else has this issue. Also is anyone looking into a solution?

    FCPx answer: At least the answer that worked for me...
    I had the same problem, as I believe many others had.
    In my case the problem was with one of OSX Mavericks' new features: APP NAP.
    It looks like this is ON by DEFAULT for ALL Applications and that FCPx, or Compressor for that matter, will not work if this is enabled on them.
    I just disabled App Napp on FCPx and now it works, again, like a charm.
    This is how you disable App Nap: http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
    I hope this helps,
    Mariano

  • HP Color LaserJet Pro MFP M177fw makes horrible noise and will not move past initializi​ng

    Makes horrible noise and will not move past initializing.

    Hi @HealthITLadyRed,
    I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
    I have provided some steps to try to see if we can resolve this issue.
    Check and remove any packaging material inside the printer and toner.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Update the printer's firmware by a USB connection. Software and Drivers.
    Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
    I can send a private message with another step to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
    Is this a new printer?
    If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Airplay mirror imaging icon will not show up on my macbook pro even though i downloaded mountain lion. How do i get airplay icon to appear on my macbook pro?

    i have a macbook pro (almost positive that its a 2010 version) and i got mountain lion. The BIGGEST AND MAIN REASON i bought mountain lion was so that i can do airplay, allowing me to mirror image what is on my mac to my Apple TV. my whole computer is updated as far as the displays and newer features but the small airplay icon will not show up on the top of my screen. therefore, not allowing me to mirror image what is on my mac to my tv... it is connected to the same wifi as my apple tv. idk what to do. could it be because my macbook pro is a 2010? desprately looking for help...please help me with this issue
    thank you

    Welcome to Apple Support Communities
    Read > http://support.apple.com/kb/HT5404 AirPlay Mirroring requires an Early 2011 or newer MacBook Pro, so your MacBook Pro isn't supported.
    To mirror your MacBook Pro's display onto the Apple TV, you can use an application like Beamer or AirParrot even if AirPlay Mirroring isn't compatible

  • My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

    My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

    Trackpad does not work properly

  • In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC'  so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or Tip

    In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC'  so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or some Tips.I have already tried many things to iTunes and my PC like trying to restore my PC but that do anything.Also,would it be fine if i contacted (call) Apple Support? Please,I need help because what I think is wrong is my PC,iPhone,or USB might be messed up so if anyone could help me with this,it would be really helpful and for anyone to be nice enough to help me.

    I think this article will help you.

  • I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

    I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

    PIONEER DVD-RW  DVR-105:
      Firmware Revision:          A506
      Interconnect:          ATAPI
      Burn Support:          Yes (Apple Shipping Drive)
      Cache:          2000 KB
      Reads DVD:          Yes
      CD-Write:          -R, -RW
      DVD-Write:          -R, -RW
      Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
      Media:          Insert media and refresh to show available burn speeds
    yes its a power mac thanks its been a long month and Merry Christmas thanks for checking my question im hoping its a driver problem but not liking some other stuff looking like replace drive

  • My apple mouse is not working.  The pointer will not move on the screen and it keeps turning off.

    My apple mouse is not working.  I can get it to connect but it will not move the pointer.  Left and right click is working, scrolling, just cannot move the pointer.  Also, I have replaced the batteries (numerous times) but the green power light turns off after a few minutes.  Any suggestions?

    How about clean up LED hole of mouse?

  • Badge on phone icon will not clear

    Since upgrading my iPhone 4 to iOS 5 the badge on my Phone Icon will not clear, it shows up with no number in it and shows on the home screen icon as well as on the voicemail tab inside the phone app. I have tried a reset, turning the badge settings on and off again, quitting the phone app and NOTHING works.

    Hi there Sean.
    Yes this is a problem with the Sim.
    I've only ever seen this from orange with regards to this particular model of handset.
    If you take your phone to you rnearest orange shop and ask them to supply you with a new sim card then im pretty sure that will solve your problem.
    The staff will probably tell you otherwise and ask you to take it to a CNSP but be firm.
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

Maybe you are looking for

  • Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

    Hi, A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0). It is appearing as a scheduled task "\M

  • Regarding the printing the output as many no of times

    hi , the issue is, i need to print the report output as many number of times as i want based on the value of input parameter. how can i do it? we are using format type as xml so no layout model. can anybody plz give the solution. regards arun.b

  • No wireless network on Windows 7 boot camp!

    Hey fellow Mac users! I'm having a problem that has been bothering me for the last two days... Once I partitioned my hard drive, and installed Windows 7 on one part, there's no wireless internet connection. I did insert my Mac OS X Snow Leopard DVD o

  • Fact and Dimension tables

    Hi all, Please let me know the relation between the fact and dimension table(s). regards chandra kanth.

  • Recursive SQL level 1

    Dear All, While trying to drop a user, the following error message is showing.. DROP USER TEST CASCADE ERROR at line 1: ORA-00604: error occurred at recursive SQL level 1 ORA-00942: table or view does not exist ORA-06512: at line 7 Please advise. Tha