My Battery indicator keeps blinking when the system is switched off.

HI,
My battery Indicator keeps on blinking when the system is switched off. When there is a AC power supply this indicattor ceases to blink. I removed the battery pack and put it back but the problem remained.
As my battery pack was old I also bought a new battery pack and charged it before using but the problem remained.
thanks...

I will be really helpful if someone can help me out in this.

Similar Messages

  • Why don't iPhone alarms work when the phone is switched off?

    How come iPhone alarms won't work when the phone itself is turned off?

    jchisholm13 wrote:
    I don't want to have it on charge all night cause it will just ruin the battery
    No it won't...
    http://www.apple.com/batteries/iphone.html

  • If a stolen iPhone was in airplane mode will a find my iPhone passcode lock apply itself when the hone is switched off of airplane mode?

    My girlfriend's iPhone was stolen whilst on holiday in London. The phone was in airplane mode and didn't appear on Find My IPhone, which was installed and enabled (all set tis correct other than airplane mode). I sent a remote passcode lock to the phone.
    The next day the iPhone appeared on the map, obviously having been switched on and had airplane mode switched off. My question is, will the remote lock apply immediately the phone comes back online?
    I assume their only opting at that point is to do a factory restore which would wipe all the data anyway, right?
    Also, can't Apple track the IMEI number regardless of a restore and a new SIM? Or the network operator that the phone was originally connected to?

    This notion that is being floated around that Apple's hands are tied due to privacy and legal concerns doesn't impress me much at all. My iPad was stolen about a month ago. I have the receipt, the serial number (from my box), and the MAC address (from my home router's log). Armed with that information it's technologically feasible to track, deauthorize, and eventually recover my device. But for reasons I have been unable to ascertain Apple refuses to provide anything like this for their customers. And as their devices become increasingly smaller, more desirable, and more expensive theft of them will also increase.
    But to my point about legalities and privacy concerns: whether they are true or not, it certainly doesn't stop Barnes and Noble from blacklisting their Nooks when they are reported stolen. At least, that's what I found after buying a Nook color off craigslist. When I tried to register it online it refused. When I called in to customer support they informed me that it was a stolen device. If I wanted to remove the blacklist, they explained, simply provide the last 4 digits of the credit card, the name on the receipt, and the total dollar amount of the store along with store number where the device was purchased. If I lacked any of that information, I could simply contact the store and retreive it from their records. Since I was not the original owner, however, my option was to turn the device over to the police and hope they returned it to the rightful owner.
    When I explained this scenario to Apple Care he insisted the limitation was due to privacy concerns. That defies logic, however, when one considers that it's the original owner (and only through the poilce and Apple's legal department) who must report the device stolen. And, like B&N, it's the customer who is able to provide personal information to blacklist (as well as unblacklist) a device according to his or her own volition.
    I've been thinking a bit about this for some time...plenty of time to think on the couch sans iPad anway...and I've been wondering why in the world does Apple not allow users to deauthorize and blacklist iDevices through iTunes itself. At that point Apple has no involvement in the process and even the barest of legalities are irrelevant. My assumption is that Jobs has thought long and hard about these issues, including my described resolution, so it begs the question as to why Apple refuses to do anything about stolen devices. I hope one day I can ask him because that is a question I would like answered more than anything: what is the rationale for the hands-offs approach to this? I can't fathom one myself but I have to guess there is one. Apple hasn't come across to me as a callous company so I'm reluctant to attribute it to that.

  • My iPhone 5C will only charge when the phone is switched off I've tried multiple leads and still it will only charge when it's switched off, somebody has told me it's the battery? But I don't know what to do

    yesterday my charger was working fine, all day long I got home and go to plug it in and it's not working, I let my phone die and it starts working like the battery symbol shows up but once the phone is on it stops working. I've tried a couple of leads but I know they aren't proper apple and it still doesn't work, my friend said I've probably fried the battery but I'm not sure, but I know since I got the phone the battery hasn't been all that good, it charges quickly but then also dies quickly, I really don't know what to do and I really need some help, should I get a new lead or replace my phone because I have insurance?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If nothiing above helped, restore the iPhone to factory settings >  Use iTunes to restore your iOS device to factory settings

  • How do i stop my iphone from sending sms even when the option is switched off

    Hi, i would love it if someone could help me out please, i have a iphone 4 and my friend also has a iphone but who lives in america for the time being, now we have been imessaging eachother but sometimes the imessage turns into a normal message even though my sms is turned off because i dont want it to cost when i send a text, how do i stop my message from sending when it sends as a normal text even though my sms is turned off, please help, thank you

    What troubleshooting steps have you tried so far?
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Problem: Fan at full speed all the time - even when the Mac is turned off

    Hello,
    my Mac mini suffers from a very strange problem. I've had it for half a year now and recently bought a new power adaptor since my old one got damaged. I plugged it in and everything was fine - until half an hour afterwards, when the fan suddenly made itself noticeable at full speed. But it didn't stop; it went on, curiously even when I shut the Mac mini down. That's right. even when the system's turned off. The noise is really unbearable and only stops when I plug off the power cord.
    Any ideas why this is happening?

    My Mini started doing this yesterday. I came home from work and the fan was going full blast. Even after shutting the machine down, the fan would continue to run at full speed (and it is LOUD...much louder than my full tower desktop PC with 4 80mm fans). The only way to stop the fan is to completely unplug the Mini from the power supply.
    I doubt that this is due to faulty wiring as my Mini is plugged in to a very nice UPS unit that conditions the power.
    Now, I'm willing to admit that this may be entirely my fault since I have upgraded my Mini with 1 GB of RAM, a Pioneer DVD burner, and a higher capacity hard drive. However, the Mini has been running 24-hours-a-day for 5-6 months since my final upgrade, so it would seem that my upgrades are unrelated to this issue. Also, since someone else is having the same problem, again, my upgrades seem unrelated.
    I was told on another forum to try resetting the PMU, which I will try when I get home today. If it works, I'll post. Seems unlikely though since the fan runs even when the Mini is powered down.
    If anyone has any other ideas, I'd be glad to hear them. I'm assuming that my Mini is no longer under the 1-year warranty since I have performed so many upgrades myself, so, if this problem is something that can only be fixed by Apple, then it will probably cost an arm and a leg.

  • TS1424 When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation.  This is home PC and I am administrator.  Any help is appreciated.

    When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation.  This is a home PC and I am the administrator.  Any help would be appreciated.

    Hi PSpark!
    I have an article here that I believe will help you troubleshoot this issue a little further. That article can be found right here:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in

    When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in
    and will then boot up again without any errors.
    I Have replace RAMS, Motherboard and Power Supply. I have check the Bio's  and Power setting on the unit. there is no place to cause this issue.
    Please help
    PC Power Tech

    Syamak,
    You didn’t specify where the beeping noise is coming from. 
    If it’s coming through your speakers, you could try to update your audio drivers since it’s possible they’re incorrectly sending a signal to the speakers as the audio chipset enters standby. 
    If the noise is coming from the motherboard, you’ll need to take a closer look at your system’s configuration or contact the manufacturer.
    I hope this helps.
    Mike
    Windows Outreach Team – IT Pro

  • Why does my menu bar keep blinking in the left corner of my screen?

    y menu bar keep blinking in the left corner of my screen?

    There used to be a disk activity or network activity indicator you could download that would make the uppermost left cluster of pixels flash when the disk or Network was accessed.
    I expect you have added some third-party utility that has installed this feature for you.

  • Cannot install AIR application when the system date is set beyond 10/31/2017

    I created a native time-stamped installer for an AIR application. While testing the installer with different system dates, I noticed that the installer does not work when the system date is set beyond 10/31/2017. I tested the same with a self-signed certificate as well as a Verisign certificate and found the behaviour to be consistent. Why does the installer stop working after this date?

    Thanks very much for keeping this issue alive.
    Let me restate the issue:
    We have a AIR 2.0.4.13090 sidecar application. Installing the application for the very first time seems to work. Any uninstall or update after that runs into issues on the problematic Windows 7 64 bit machine. The installer logs all point the finger to Windows Installer having problems writing to the temp directory.
    We've gone through many, many things trying to resolve this, including resetting administrative access to the temp directory and flushing the temp directory out entirely. I'm reporting this news secondhand, so it's not possible for me to directly relate the exact measures taken, step-by-step. The ONLY thing that reliably worked for running and installing updates on this AIR application was the following:
    1) Create a new administrative level user.
    2) Log in with that user.
    3) Disable firewalls.
    4) Run the updater.
    5) Log back in as normal user, delete temporary user.
    if the user account created in step 1 is not deleted in step 5 and is used to attempt a further update or uninstall, it will fail. This seems to tell me that AIR is able to utilize the temp folder via Windows Installer correctly only once. After that, it dirties this directory somehow and is unable to use/write to it, and subsequent uninstalls/updates fail with error 0.
    Again, the failure all show msi issues writing to the temp directory. They result in an "Error 0" alert dialog in AIR.

  • Error: The e-mail server could not be reached when the system was trying to

    Dear All,
    I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
    And when i configure the Mail Transport in the system i get the below message on the eMail Window:
    "Error: The e-mail server could not be reached when the system was trying to send the message!
    javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
    I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
    Thanks,
    MS

    Hi,
    It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but  still i had to maintain proxy configuration.
    Since it giving authentication error, it feel it could be proxy error.
    Please refer below links which talks about same error :
    http://java.sun.com/products/javamail/FAQ.html#smtpauth
    Or else i think it is issue with port.
    Regards,
    Jigar Oza
    Edited by: jigar oza on Jul 6, 2010 12:43 PM

  • I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    How do you disabled it if running the same?

  • How to access my hard drive when the system does not work

    how to access my hard drive when the system does not work

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

    I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

    You did turned in Settings > General > Usage > Battery Percentage: ON?
    Try a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Convert the date of string to datetime format 'MM/dd/yyyy' when the system date format is 'dd/MM/yyyy'.

    I need convert the date of string format 'MM/dd/yyyy' to datetime format 'MM/dd/yyyy' when the system date format is 'dd/MM/yyyy'.Since
    I need to search values based on date where my database datetime  is 'MM/dd/yyyy' format.

    In my opinion you should re-consider the assumption that the date picker returns a string. Maybe it is able to return a
    DateTime object directly instead of string. Then you will pass this value as a parameter of SQL query. This should work regardless of computer configuration.
    Otherwise, follow the previous string-based approaches.

Maybe you are looking for