My battery is fully charged but when I hook it up with a cord to the Aux it says that the battery is low.
I have the iPod classic 30GB and just recently am experiencing problems with the battery. When I connect it to my truck through the cord AUX it will play for maybe 10 minutes and then die out telling me the battery is low needs to be charged. I know that can't be especially since I know it was fully charged before I connected. Is it possible that I just need to get a new battery?
If it's an older 3rd or 4th gen iPod, and not the 5th gen "video" iPod, the battery is not that hard to change yourself, if you are good at such things. This web site has repair guides
http://www.ifixit.com/Device/iPod_Original
The part can usually found on eBay or other online sources. If you pay for the replacement, the service cost may not be economical.
You can also do the replacement on the 5th gen iPod, but the seam is VERY tight on that model, so opening it up is more difficult.
Similar Messages
-
my lights on my macbook indicate it's fully charged, but when i unplug it, it won't come back on. any suggestions???
Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.
-
I just received a iPad2 Wi-Fi 3G 32GB, it is fully charged but when I turn it on no icons appear except Itunes and a connect cord. What am I doing wrong?
The screen that you see is trying to tell you to connect the iPad to iTunes on your computer with the cable that came with it. ITunes will then walk you thru the setup steps. Make sure you download the latest version of iTunes before you connect your iPad.
Online iOS 5 / iPad user interface guide:
http://help.apple.com/ipad/5/interface/
Online, downloadable PDF iOS / iPad user guide:
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
Or you can download the free iOS 5 / iPad user guide from iBooks. -
Please help! I have an ipad that I purchased in Australia and my iTunes account is Australian, but when I try and watch Australian TV shows on Australian websites it says that the content is not available because I am not in Australia. How can I fix this?
Are you using a proxy server to access the net?
Or another cause could be that your router thinks it's in its home country (probably china)
I just don't know how to fix it. There's a way but I don't know enough to advise.
You could try googling your router model and 'wrong country' or keywords like that and see if something comes up. -
Hi, i buy new phone in ukraine,but when i try add new device on my apple support profile,it says that serial nuber already used by another apple id please help what can i do?!thx
You purchased a gray market phone. The iPhone is not available for sale from any Authorized source in Ukraine. There are no authorized or supported carriers in Ukraine.
Take it ack and get your money back.
If you want an iPhone, go to a country where unlocked iPhones are available for legitimate sale and purchase one directly from Apple. -
My battery is fully charged, but when i disconnect from mains MBP won't start
As soon as i remove mains cable from MBP the laptop just crashes ... no juice ... even though it says battery is fully charged. As soon as i replace cable, it reboots ... i need this laptop to work on battery !!
Try resetting the SMC. If that doesn't work, I would get the machine to Apple for service ASAP.
-
IPad was working fine & fully charged. Screen is now black & non-responsive. Is there something I can try or should I take to service center?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My new Hewlett Packard printer is listed as an AirPrinter on the Apple website, but when I try to print from my iPad it says that there are No airprinters. The printer is connected to the same WiFi network, is turned on & I'm close to the printer. Do I need to forma/set up the iPad or Printer to enable this feature?!
It would help to post this in a more proper form. This is for the iTunes family of stores.
-
At first my pages was working fine after I installed it, but just recently it won't let me print, save or export my documents. I went back to the aaplication store and it shows that pages has been installed. I have no idea what to do next.
You need to totally delete the demo version files then reinstall your registered version.
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
Peter -
i need help with my ipod fast please
Go here and select iTunes Store Account and Billing:
Apple - Support - iTunes -
Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?
Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock -
I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks
simply try doing a back up and restore
when going thru the activation screen, select SET UP AS NEW and then test your device. if it is not shutting down then it could be 1 or more apps tht have been downloaded wch could be affecting the device
you will then need to follow the process of eleimnation, meaning add 2 apps and then monitor your phone, if nothing happes then add another couple of them and then check
good luck !! -
My iPod touch 4G will not charge. I charged it and when I got it off charge it was really hot but showed it was fully charge then when I turned it on again the battery was dead. Now it won't charge. Please help thanks!
Try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.
I suspect you have a hardware problem. -
My Iphone4 charges when The battery has fully died but when its on the lighting bolt does not appear. "Help"!
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
Suggest that you take full advantage of the above. -
I recently purchased a 13" MacBook Pro. On my first boot up, the battery charged to 100%. I didn't operate this thing on the battery. The next time I booted this thing up, the battery was charged but the meter read 98%. In the subequent boot ups of this machine, and I still having not used the battery, my battery is fully charged but the meter now reads 96%. IS there some problem with the hardware or the software? Help is appreciated!!
Thanks.hey thank you for the info. Based on what happened, the battery has gone up to 100% just once when I booted this machine for the first time. On subsequent occasions the Battery Charged symbol has appreard at below 100% charging. I have been using my MacBook Pro for the whole day with outlet power and never did the battery go back to 100%. I hope I don't have to calibrate the battery on this model?
Maybe you are looking for
-
F-53 tcode . Open Document is not being pulled.
When we try to post manual payments by using F-53, and I add the document number. It gives me a message that -No appropriate line item is contained in this document Message no. F5228, although I see that an open item in Fbl1n. Is their a config step
-
Creating a graph by subtracting successive array elements in labview
I have an array 'A1' of 'N' elements. I want to create an array 'A2' of 'N-1' size having first element as A1[1] - A1[0], 2nd element as A1[2] - A1[1], and so on . then I want to plot the A2 array on the graph for analysis. i.e i want to subtract t
-
I am trying to rip CD's into iTunes so sync with my iPhone. When I currnetly rip the CD, it will rip the first 10 tracks in a matter of moments at 40x. However, the last 4-5 tracks take forever - up to 20 minutes per track. This has happened on mu
-
How to retain screen input values in HR program on BACK ?
Hi, I have a report program in HR, using LDB "PNP" and Report category : PSSPCDOC. After the program is executed and the report is displayed on screen, if the user clicks the BACK button (F3), the selection screen is displayed with initial values. Th
-
No lock screen on ipad3 with ios7
Since installing ios7 on my ipad3, I have no lock screen showing the swipe bar. When I open my Smart Cover, it goes right to my password protection screen. When I tried various lock screen photos, I was unable to scale them down or move them easily