My battery is not responding while charging

my battery is not responding while charging

while connecting to itunes to restore, i am getting error. UNKNOWN ERROR 3194 WHAT I HAVE TO DO

Similar Messages

Battery is not detected while charging

My laptop battery doesn't hold a charge while the charger is plugged in. Also, the battery icon on the bottom right of the screen has a red x. When I hover over the icon, it says "No battery is detected".
I tried searching on the system's help features and Control Panel with no success. We use the AC adapter that was included with the computer.

Here are the HP instructions for Testing and Calibrating your battery.

My iphone is not responding, while connected with charger only apple logo is appeared no any other response , what i have to do

my iphone is not responding, while connected with charger only apple logo is appeared no any other response , what i have to do

while connecting to itunes to restore, i am getting error. UNKNOWN ERROR 3194 WHAT I HAVE TO DO

Battery life seems short or the battery does not hold a charge, seems to drain quickly or does not last as long as expected.

Solved!
Go to Solution.

IMPORTANT Notes while charging your Reader device:
It is recommended to charge the Reader using the supplied AC Adapter. When using the AC adapter to charge your Reader device, the lightning bolt symbol that appears next to the battery icon [FIG. 1] on the display of your Reader device is an indication that it is connected to AC power and is charging the battery properly. If the lightning bolt symbol is not present, double check the AC Adapter to ensure that your Reader device is properly connected. This symbol does not appear while charging via a USB connection.
If you charge via a USB connection and leave your Reader Digital Book connected to the computer to charge and the computer goes into sleep/hibernation, charging will stop and the red charge indicator on the Reader will turn off. If left connected, your battery may begin to discharge. To avoid this, turn off any sleep/hibernation settings while charging or set your sleep or hibernation settings to come on after your Reader Digital Book has been charged and then disconnect it from the computer once charging has completed.
It will take approximately 4 hours to achieve a full charge with a computer. It will take approximately 2 hours to achieve a full charge with the optional AC Adapter.
If your Reader Digital Book is left connected to a powered USB hub while the computer is shut down, your battery may begin to discharge. Disconnect your Reader from the hub when the computer is not powered on.
Always verify that your Reader is fully charged by disconnecting it from the computer and checking the battery indicator. The battery indicator will display 4 black bars when it is fully charged
On a full charge, the battery has the capability of up to 7,500 continuous page turns. Actual battery life will vary based on usage patterns, settings and battery conditions. When the Reader is turned on, off, or a page is marked, battery power is used, thus lowering the expected battery life.
NOTE: When storing the Reader for a long period of time, use the Device Shutdown feature in the Advanced settings menu. After using Device Shutdown, it may take approximately 30 seconds for the Reader to start the next time the Reader is turned on.
Playing audio will reduce the battery life. If you did not start audio play back intentionally, confirm audio is not playing. You will not hear playback unless headphones are connected. Audio playback will continue until it is stopped by turning it off from the Now Playing menu. To see if audio is playing, press the HOME button and then press the OPTION button. If Now Playing is displayed in the dialogue box that appears, tap Now Playing and this will take you to the song that is playing. Press the Pause button to stop playback of that song and then press the HOME button.
NOTES:
Due to the nature of the E Ink electronic display technology, the LCD can retain an image without having power. Turning the page is the only time power is consumed. If the Reader's power is drained, the LCD will retain the last image that was displayed, thus making it appear like the Reader is frozen and in some instances it will not have enough power to perform other operations such as turning on or off.
Battery life can be affected by operating temperatures below 41 degrees F, lack of use, or if the battery has not been given enough time to fully charge.
As with any battery, if the Reader is stored for an extended period of time, the battery will discharge on it's own. Therefore, it may be necessary to charge the battery prior to use.
If the Reader has not been used for an extended period of time, repeatedly charging and discharging will improve the efficiency of the battery.
If the battery life still seems short, the battery may need to be replaced.

Iphone 6 plus fingerprint is not working while charging

My iphone 6 plus fingerprint scan is not working while charging. Is this normal?
I tried my iphone 5s and it works just fine even while charging.

I think I got an answer to my own question
If you're using generic lightning cable (non-original lighting cable), the fingerprint scan doesn't work while charging.
I just find it weird as my iphone 5s works even if i'm not using the original lightning cable though.

HT4623 The battery is not keeping a charge on my Iphone 4S. I have the lastest ISO 6.1.3.

The battery is not holding a charge on my iPhone 4s. I have the lastest IOS 6.1.3.

That's unfortunate. Have you searched this forum and read all the useful troubleshooting tips? What exactly have you done thus far to remedy your situation?

Preview not responding while click printing

Preview not responding while click printing....
Anyone can help? Thx.....

It happened after I upgrade to OS Lion.....

My ipad air is not turning on and not responding to charger

My ipad is not turning on and not responding to charger. I was using my ipad and then suddenly it had the apple sign and it just stayed like that and then I put the charger in it and it stayed the same with the apple sign. I tried turning it on and off and pressing the home button but nothing seemed to work. It just stayed the same with the apple sign. I'm really worried bc I just got this now for christmas and I'm worried I might have done something. So can you please help ASAP. Thanks , it would really help.

Thank you. I will try your tip. And if it works, I'll give you 10 points . But now its been charging for hours and its still the same . But thank you!

Ipad 3rd gen is not responding or charging

Ipad 3rd gen is not responding or charging. When plugged in it will not respond for 10min(approx.) then show "plug into iTunes" symbol... Does not respond to computer either. Re-boot does not respond either. Any ideas?

YOUR IPAD IS IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

TS3274 The iPad 1 battery is not holding a charge for very long. This is new. Why is this happening?

The iPad battery is not holding a charge for very long. This is new. Why might this be happening?

iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
 Cheers, Tom

Converting to MP3 causes iTunes to Not Respond while using 50% CPU usage and makes my computer stutter

Anytime I attempt to "Createa an MP3 Version" of a track, it will take a REALLY long time to work.
Right now I am attempting to convert an audio book I have which has 88 tracks. Once I start to convert anything more than 1 track at a time, iTunes immediatly becomes "Not Responding" and takes up about 50% of my CPU the entire time. It seems like it's doing something in the background but it won't even update the screen anymore, creating weird effects on my screen (Ghost menu bars show up at the top of my screen, etc.). In addition, once iTunes becomes non-responsive, my entire computer starts to "stutter" meaning that every other second everything momentarily hiccips and stop for a split-second. This means that while iTunes is converting any multiple MP3 files, if I drag the mouse across the screen, it stops every other second. Any videos that I try to play pause every other second briefly. Basically, my computer becomes almost unusable. Plus, while iTunes is working in the background, different programs randomly jump to the front of the screen. I will try to be using my web browser while iTunes is working in the background. Then, suddenly, iTunes pops back up to the foreground in front of my browser (put still won't be responsive to clicks). My notes program will also flash windows in front of my web browser while surfing, again, only when iTunes is running in the background.
I really don't understand:
1. Why it takes so much time to convert any file to an MP3 file. Even converting a single track takes a few minutes. I'll let my Macbook Pro (with Windows) sit for HOURS upon hours trying to convert the 88 track audio book and it always freezes up and never comes back.
2. Why iTunes becomes non-responsive so quickly and won't allow the screen to update once it starts "thinking." It caps out around 50% of my CPU power so it's not like it doesn't have the headroom to refresh the screen while it works.
3. Why does iTunes' working in the background affect every other program I am running? I don't mind if it uses up CPU cycles in the background, but if it makes my computer unusable while doing so, it's really not worth it.
I should state that I love Apple products (even though I use Windows on my MBP for school purposes). However, I absolutely DREAD having to do anything with iTunes anymore because it has become such a hog on my computer. Someone please tell me that there is something wrong with my iTunes and/or a setting I should change. I have already re-installed iTunes from scratch before and that didn't help.

Not a solution, but if the Podcast feed is dormant, why not unsubscribe?
As to the file structure for media on the device it is deliberately obscured as a countermeasure to casual piracy. See Recover your iTunes library from your iPod or iOS device. Content put on the iPod by a non-iPod aware product is going to treat it like any external drive. The iPod firmware won't read that media.
tt2

Keyboard not responding while installing Windows XP sevice pack 2

Hi,
I am new to macworld, Just got Macbook and try to use bootcamp to install windows xp, but keyboard did not respond hence got stuck at this point. Please help me. how to make keyboard working while installing windows xp using bootcamp. I know that for non-portable Mac USB mouse and keyboard can be used but whats need to be done for portable Mac like Macbook

I have been scouring the internet on my limited dial-up connection trying to find someone who had a definitive solution to this problem which I too have been stuck with.
What finally resolved this keyboard problem during that critical stage in the win xp setup was by:
1. Going to System Preferences>Keyboard and Mouse and check-marking "USE ALL F1, F2 ETC. KEYS AS STANDARD FUNCTION KEYS (when this option is selected, press the Fn key to use the special features printed on each key)" Before starting up Boot Camp,
2. and Unplugging the Mighty Mouse from the keyboard while my mac was rebooting.
Switching out the apple keyboard for a standard USB keyboard did not work (perhaps in hindsight, i should have plugged it in first before boot camp rebooted and tried to install win xp;)
Attempting time after time again did not solve the issue;
Neither did doing all the software updates, firmware updates and such while borrowing an ethernet cable connection from my local library;
I did not need to find another Win XP with SP2 nor did I need to find a USB keyboard;
Not even updating my Mac OS X from 10.5.2 to 10.5.5 or installing the new firmwares for the Apple aluminium keyboard was necessary it seems.
Just a simple checkmark to make the apple keyboard's F-keys primary and unplugging the Mouse from the keyboard before the WinXP install kicked in, allowed me to press Enter to proceed with the installation.
I also turned off the special functions of the mighty mouse like the center click and roll ball, but I felt obligated to post the solution to this problem - Do as you would be done by.
Hope this helps others who encounter this same problem, please confirm if I am correct. Good luck.

Lumia 920 seldom does not respond while in sleep m...

Hi,
I encountered the same issue along with another abnormal condition too. Phone turns into locked state and the screen stops glowing (blank black screen), indicating idle state. It doesn't respond when I press unlock button. Also it does not respond for Camera, and Volume buttons too. But, when I connect it to a PC in that state I am able to browse the phone normally via PC only. Phone still remains buggy. As a work around pressing volume-keys + power key + camera key simultaneously restarts the device and resumes to normal state. However, previous state of phone isn't restored i.e., device starts as it were normally restarted.
Regards,
K Chandrasekhar Omkar
Moderator's Note: E-mail address was removed. Please don't publish your personal contact information on a public forum.
Sorry, couldn't find any place to post this. It seems that there is, at least on my phone, a semi-reproducible bug that stops the volume control from working.
Steps to reproduce (from clean phone, ie. just freshly booted, no remnant IE tabs):
1. Turn on phone.
2. Open music+videos (Xbox music) app. Play a song that is locally stored on the phone.
3. While the music is still playing, open up an Internet Explorer tab and navigate to youtube (m.youtube.com).
4. Play an HD movie file. I played Peter Jackson's "The Hobbit" preview #9. Your previously playing music will stop playing.
5. After a few seconds, stop the youtube video playback by hitting the Windows button.
6. Go back to the music+videos app. Play a song that is locally stored on the phone.
On times that the bug shows up, the music plays at a fixed volume. Using the volume rocker will cause the volume display to increase and decrease, but the actual volume will not change unless you change the volume to 00/30, at which point the sound will mute. If the bug doesn't show up, repeat steps 3 through 6 until the issue shows up. You don't need to reboot in between attempts.
Interestingly, volume control still works if you go back to the youtube video. The issue shows up when using the loudspeaker as well as when using headphones. If nobody else can reproduce it, we can start trying to figure out if it's certain music file types or something that cause it. Diagnostic information below:
Model: NOKIA Lumia 920 Carrier: AT&T
OS Version: 8.0.9903.10 Firmware revision number: 1232.2109.1242.1001 Hardware revision number: 1.0.0.0 Radio software version: 1.0.202041.3 Chip SOC version: 8960
Thank you,
Omkar Kandarpa

I've had the same problem. The screen won't blank during a call (like the proximity sensor isn't detecting my face/finger/hand). I keep hanging up on people with my ear. I've taken to locking my screen before putting it to my ear but anytime I get another call / text / voicemail / calendar notification / alarm while i'm on the phone (which happens a lot still) it lights the screen up again and makes it where i'm able to hang up with my ear.
I've factory reset, and had the phone replaced TWICE already. I'm on my 3rd Lumia 920 (and they all have the same issue!) This didn't happen until the most recent firmware update...so I think it was a problem created when they were trying to fix the other proximity sensor issue where the screen stayed on black all the time during a call.
Rebooting does fix the problem temporarily, but it always comes back. I'm tired of hanging up on people and hoping for a new model device from AT&T but they're giving me **bleep** at the moment.
TLDR: Factory reset, replacement devices don't fix the problem. It's a firmware bug. I'm on my 3rd 920 with the same issue. Extraordinarily frustrating.

Touch screen not working while charging

I have I phone5
The touch screen some times doesn't work or not sensitive while on charging
And also if I don't lock the phone automatically random selection happens and any app is opened
I'm not using third party accessory
Thanks

This is probaly a software problem in my opinion this could probably be resolved at the genius bar in any apple store also your phone should be under warranty as it is a iphone 5 and they did not come out not so long ago so in other words go to a apple store and they might have to replace the phone. In my experience this has nothing to do with the cable but a software issue in ios did this issue happen in any earlier version of ios

Since ive downloaded IOS 6 my battery will not keep a charge. I took it to Apple store and they restored it and my battery still only last 30 -45 mins

Since i downloaded IOS 6 my IPod 4s will not keep a charge. Went to Apple store and they restored it. ive turned every app off and now my battery only last 30 to 45 mins.Is anybody else have/had this problem. Apple store employee's told me this is very common with the IOS 6 upgrade

Shows what they know. Battery issues rarely relate to an update. The fact that they restored it and the problem continues indicates a hardware issue with the battery.

My battery is not responding while charging

Similar Messages

Maybe you are looking for