My battery port doesn't sit in the Mac properly and doesn't light up?

So I just tried to plug my battery in, and it isn't sitting correctly like it would when it normally snaps in. It also isn't lighting up.. now if I hold it a certain way it charges, but other than that - nothing.
Now my question is, does my warranty I first get with MacBook Air cover getting a replacement charger? OR am I going to have to dish out £65 to buy a new one?
Thanks, Jasmine.

Your one year limited warranty should cover a replacement charger.
First, try here > Apple Portables: Troubleshooting MagSafe adapters
If troubleshooting doesn't help, make an appointment at a Genius Bar > Apple Retail Store - Genius Bar
They may need to do more than just replace the adapter.

Similar Messages

HT201263 My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter

My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter

If you are in Hong Kong, go to Digital Trade, 1/F, Sincere Plaza, Argyle Street, and it will cost you 120-150HKD, but before you go check that your power button and home button are working correctly, if not press as hard as you can, hope this will help.

IWeb doesn't sit in the dock after installing Mountain Lion? Why is that?

iWeb doesn't sit in the dock after installing Mountain Lion? Why is that?

Assuming you updated the OS on a Mac that has iWeb installed you will find iWeb in the applications folder. See this page for how to open your website when using Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair

When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?

When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?

Did you make sure that your security software allows iTunes to contact Apple during the restore process? http://support.apple.com/kb/TS3125

When l plug my ipad into my computer it just shows files from the ipad. And doesn't open itunes.

When l plug my ipad into my computer it just shows files from the ipad. And doesn't open itunes...Help???

Check for Update (tap to enlarge image)

My safari sometimes keeps asking me to log into the "Newcastle area" and doesn't let me browse any pages ? Why and how do I fix it ?

My safari sometimes asking me to log into the "Newcastle area" and doesn't let me browse any pages ? Why and how do I fix it ?

Try this:
With Safari open type command + option + E - all three keys together.
Next go to Safari in the menu bar, and select Reset Safari,

My phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

my phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

Do a reset by holding the power and home button until the apple logo appears ignoring the slide to power off (no data loss).

I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.

I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.

Read here.
http://support.apple.com/kb/TS1591

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

My Ipad2 is always restarting, but only appears the apple symbol and doesn't starts. What can I do?

My Ipad2 is always restarting, but only appears the apple symbol and doesn't starts. What can I do?

Thank you for your reply.
I don't think it's paired with another device, as the Apple TV (3rd Gen) is the only device I have from Apple, that uses this remote (unless my iPhone or iPod can pair with it) ..or maybe the remote pairs with other than Apple products ? (Can it) ?
I have tried to press the menu and right - left - up- down - middle - play/pause simultaneously without anything happening.
All I'm left with now, is a brick with a flash on it.
I never connected it to my laptop before it broke down (as it only was 2-3 days old) can that be a problem for resetting it ?

HT201343 My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why ?

My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why ?

The Airplay icon will not display if the OS is unable to locate any Airplay devices.
I would check that both devices are connected to the same network and maybe even power cycle the network devices - eg router etc
Maybe even try to connect both devices to another network like an iPhone personal Hotspot and see if that helps to isolate the problem

My computer won't play videos from site like the Daily Show and the CW, but they stopped working last week. I have the newest version of Adobe player. Anyone know why the full videos will not play?

My computer won't play videos from site like the Daily Show and the CW, but they stopped working last week. I have the newest version of Adobe player. Anyone know why the full videos will not play?

I failed to mention that the sound does play on the videos that are not playing.

My iPhone says that I don't have enough storage to update one of my apps so I went to delete stuff that I didn't need but every time I select what I want to delete my phone freezes, goes back to the home screen and doesn't delete anything.

My iPhone says that I don't have enough storage to update one of my apps so I went to delete stuff that I didn't need but every time I select what I want to delete my phone freezes, goes back to the home screen and doesn't delete anything.

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

My battery port doesn't sit in the Mac properly and doesn't light up?

Similar Messages

Maybe you are looking for