My BB 8320 camera is not working and calls drop after 8 to 10 minutes...

Hi,
Acutally I got this 8320 as a gift 6 months back.  The problem i am facing is that the camera is not starting at all, i have tried troubleshooting it and it is not working still, and sometimes when i am speaking on phone the call drops at the 8th or 10th minute, it doesnt happens every time but does happens very often.. 
The Version is V4.5.0.201 (platform2.7.0.85)
Will upgrading the software will work or else can you suggest me an solution, i am in need of a nice helping solution.
any other information you need just let me know...
Regards,
Karan

I'm not familiar with 4.5.0.201.  Is that what's listed in Options >About on the 3rd line down?  The latest I was aware of was 4.5.0.187.  What carrier is branded on the device?
What happens when you try to start the camera?  do you get an error message of any k ind?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

  • HT1688 My camera is not working, and I have tried all the ways possible to get it working, but no luck.  What do I do?

    My camera is not working, and I have tried all the ways possible to get it working, but no luck.  What do I do?

    Having tried all the ways possible to get it working, contact your retailer again and politely tell them they did not yet satisfactorily resolve your trouble.  Their Apple-Authorized Service Provider will be able to repair it.
    Message was edited by: EZ Jim

  • Why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?

    why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My GoFlexPro for Mac external drive will not work and freeze Finder after I switched to Mountain Lion. Anyone same trouble?

    My GoFlexPro for Mac external drive will not work and freezes Finder after I switched to Mountain Lion. Anyone same trouble?

    Search this site for many reports of problems with GoFlex drives.

  • Elite Pro, CMSS-3D not working and other issues after driver update

    DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
    The only time it works is if the original drivers are installed from the installation CD.
    ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
    Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
    Now regardless of what drivers are installed, there?are no longer any on screen indicators.
    The indicators looked like the ones that show when using the remote controller.
    Anyone have any ideas?

    Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
    http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
    http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
    http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
    http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
    http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
    http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
    http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
    http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
    http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
    http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
    http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
    http://rapidshare.com/files/25244022/[email protected]7.254.6.0

  • My itunes will stop working and shuts down after 5 to 10 minutes playing. I have the most recent updates. How can I repair or correct this from crashing?

    My itunes will stop working and shuts down after 5 to 10 minutes playing. I have the most recent updates. How can I repair or correct this from crashing?

    Hello there, jbenjaminii.
    The following Knowledge Base article offers up some great recommendations for troubleshooting the issue you're describing:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1421
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT201210 with the latest version of OS my Camera is not working and my WiFi Greaid out what can I do to fix this issu?

    with the OS 6.1.3 my Camera is not working the shutter is close out and My WiFi graied out need help
    Thanks

    Hello ffattah,
    Thank you for using Apple Support Communities
    I have a couple of articles for you to run through and test out. The first is to address the camera not working, take a look at this one iPhone: Hardware troubleshooting found here http://support.apple.com/kb/TS2802.
    Camera is not functioning
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    For the Wifi being grayed out in your settings take a look at this article named iOS: Wi-Fi settings grayed out or dim found here http://support.apple.com/kb/ts1559
    And if none of that works try resetting the device with this process from iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found http://support.apple.com/kb/ht1430.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Lastly you may need to backup and restore the device with iTunes:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    All the very best,
    Sterling

  • My HP ENVY dv4 windows 8 camera is not working and it cannot be found on the device manager.

    I am using a HP Envy dv4 on Windows 8 and trying to use the 'Cyberlink Youcam ' Webcam which is not working. When I went to find it in the device manager, it was not present. I have restarted my computer already.
    Product Number: D5F96PA#AB4
    Serial Number: [Personal Information Removed]
    Thanks

    Hi there  @Eliyana 
    Welcome to the HP Support Forums!
    I understand that your Webcam is not working and does not appear within device manager. I am happy to assist.
    This document is pretty much a catchall of webcam related issues. There is a section specifically for the device not  appearing in device manager. Check it out, unfortunately if it does not resolve with that then it is likely either a loose connection or fault in the device.
    Webcam Troubleshooting (Windows 8)
    Hopefully that will work for you. If it does require service, then you can try contacting phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Camera raw not working and updates not working

    I have just re installed CS5 Extended after a system disc failure. Photoshop works but when I try to open raw files I get a message to say my camera is not supported (Canon550D. It was of course working previously)
    I have tried updating the software but non of the updates work. I get an error message to say "Error in down loadin, Try again later"
    I have deleted the software and re installed but no change.
    Can anyone help?

    Adobe - Photoshop : For Windows
    Adobe - Photoshop : For Macintosh

  • Camera not working and light blinking after upgrade

    After upgrading to Mavericks, the built-in camera on my MacBook Air (mid-2013) has stopped working in all applications. When I start an application that uses the camera, the image does not appear, and the camera light blinks rapidly until I close the application. Console shows the following messages:
    11/24/13 11:34:08.000 a.m. kernel[0]: AppleCamIn::power_off_hardware
    11/24/13 11:34:08.000 a.m. kernel[0]: AppleCamIn::power_on_hardware
    11/24/13 11:34:09.000 a.m. kernel[0]: ISPCPU: ERR: ./H4ISPCD/filters/IC/CImageCaptureH4FSM.cpp, 452: FlowIC00: MIPI error (interrupt source = 0x8)
    11/24/13 11:34:09.000 a.m. kernel[0]: ISPCPU: ERR: ./H4ISPCD/filters/IC/CImageCaptureH4.cpp, 2503: FlowIC00: Perform error recovery (1).
    The latter two messages repeat until I close the application.
    This is not the same problem as the Skype camera issue that was resolved with a previous update. I have tried resetting the NVRAM and PMU, reinstalling Mavericks, and using the guest account.
    This user has the same issue: https://discussions.apple.com/message/23721483#23721483
    Any help would be greatly appreciated — I would really like to have my camera working!

    Hello grmurchison,
    Thank you for providing the details of the issue you are experiencing with your built-in iSight camera.  You have taken some really great steps to isolate and troubleshoot the issue.  I found an article with a couple of additional steps (you can skip the steps you have already taken):  
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • What should I do if the camera's not working and mac can't find it?

    The camers's not working. When I open Photo Booth there's a line says "Camera is not turned on". The same thing in other programs deals with camera. What should I do?

    You should be able to select Force Quit from the menu beneath the Apple icon in Finder
    and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
    OS X - Support
    Not sure if rebuilding the iPhoto library would help this issue. However if you had to
    turn off the computer without the correct method (unplug, etc; instead of menu choice)
    the system may have accrued damages and should be checked, maybe repaired by
    use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
    run 'repair disk permissions' while it is running in that reduced mode; then restart after.
    •Understanding Safe Mode - tuts+ computer skills tutorial:
    http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
    •OS X: What is Safe Boot, Safe Mode?
    Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
    There likely are other means to rectify troublesome applications, including reinstall.
    Be sure to backup your music, image, video, and other work on an external drive
    or suitable device as a precaution against loss should there be a hard drive failure.
    iPhoto - Mac Apps - Apple Support
    There should be some tips and help information using iPhoto via this tiny Support link.
    Good luck & happy computing!

  • Camera shortcut not working and freezing

    Hi sony loving friends:
    I have the xperia Z1, and after the kitkat update, the on screen camera shortcut will not work. 
    when i press they shutter key, the camera does come up, but if i touch the screen to take a photo or focus, the phone freezes !!!
    oh no, what do i do. can someone please help me  
    Thanks so much

    Hi there,
    Try the following:
    Settings > Apps > All > Camera > Clear data/cache > Force Stop > Restart the phone and check again.
    Cheers.
    There is nothing impossible to him who will try.  A. t. G. (356BC - 323BC)

  • Internal web cam does not work and unknown usb device pops up

          I have had my Pavillion DV6 1230us laptop now for about 7 years now and it was working great untill last year. When the lap top comes out of sleep mode or I restart the computer the " unkown device" balloon pops up. I have tried the following fixes, un-installing all the usb devices and did a reboot, I removed the main battery and held the power button for 2 minutes and re-installed it , I have re-installed the webcam drivers from HP and even removed and installed  the small mother board battery with no sucess. When the " unknown device " balloon pops up I can hear an audio prompt like I am plugging and un-plugging a usb device in one of the ports but I am just watching and hearing the problem happening.

    Hey Scotman,
    The Webcam would not be listed as USB device as it is built into the Notebook. Do you have anything connected USB? What do you see in device manager for your Image devices? Here is a video on Webcam. I am not sure if anything will help you in it or not. If you remove all USB devices in the device manager and remove all USB cords from the computer the balloon should not appear on restart.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My built in camera is not working and I cannot find out how to fix the problem

    I looked throught he manual but could find no trouble shoot help. it was working fine but now I just get a black box if I use video in say skype or if I use photo booth. Both are set with the built in camera as their preference.

    FaceTime
    http://support.apple.com/kb/TS4185
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • HT1688 my camera is not working and storing pictures

    when I take a picture, it doesnt go to my pics or albums, I can not even save a picture when I receive one from a text,,,

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

Maybe you are looking for