My BB 8520 won't connect via USB after the firmware upgrade

Hi,
All was working fine until I followed the upgrade prompts. The 'phone works but a) it won't accept Opera Mini 5.1 (which was in the 'phone already) and b) I cannot connect to the PC via the USB cord.
What happened?
This 'phone shares the same SIM card with 3 Nokias (E72, E90, E62) and I've never had firmware upgrade problems with them - in Symbian OS.,
Any ideas?
Regards, Douglas
L. Douglas Henderson - ARTCRAFT Music Rolls
EDIT: Link Removed. Please review User Guidelines under section "No spam please."

Hi, again -
Just downloaded Bolt and I like it also. (No more zooming: whoopee!)
Never heard of this browser before, having used Opera Mini/Mobile (depending upon the 'phone) since 2004. Was on E-Mails for cell 'phones dating back to 1997, coast to coast: primitive service back then! [Rarely did I use the default browser on any 'phone I've had, including Motorola and Palm before Nokia.]
Bolt loaded faster than Opera Mini 5.1 did on my Nokias and the Blackberry 8520: amazing!
Now my "not as good as a Nokia with Symbian" handset is useful again. The firmware upgrade did improve the videos and the links to them, so it was a GAIN SOME FEATURES and LOSE SOME FEATURES firmware upgrade.
Probably Opera will have a link for the Blackberry 5 platform, eventually. The problem, I think, was that the link only worked with three versions of their 4 edition.
You have made my day!
Thanks.
Regards, Douglas
PS: Not until the Nokia E90 Communicator was off the market for a year or so, did Opera put out a Mobile browser which functioned on it. The Communicator - in a variety of versions - had a 12 year run in Finland, something of a record for handsets in this field. For Word .docs, fast typing and office style activities, it's hard to beat. (You can't wear one in your pocket if the garment is Spandex, of course.) The music on the E90 is loud and good; with the wireless aux. speakers it rivals a portable stereo, so I use it for that purpose much of the time, even when off-line.

Similar Messages

TS3147 connect OS X 10.9.2 macbook air to windows 7 network and share printer (Brother HL-2230) connected via USB to the same network

Would like to share printer Brother HL-2230 on windows 7 network. Using Windows 7 "Homegroup" is not an option.
The printer (HL-2230) is connected via USB to win 7 computer. Before I updated OS to 10.9.2 it (Macbook air) had HL-2230 as one of its' priinters and was able to print. Now a print request hangs on "Hold for authentication".
I have already reset printer system and re-installed printer x2 - no luck.
I have already connected WiFi Epson XP-200 to the Macbook air - runs fine, no problem.
thx for any help that can lead to the resolution of this problem.
~~~~~~~~~~~~~~~~ _/)~~~~~~~~~~~~~~~~~~~~~~~
KKAOSS

Thanks greg,
I am on the road right now at a Mickey D's. Still another 150 miles to go to get home and back to the scene of the crime LOL
I appreciate your feed back very sincerely.
I will respond in AM when I can see - I need to get some java and get back on the road to get home by 1AM. Take care
best
KKAOSS

E65 won't connect via USB Cable

Hello to you all...
I just got my new Nokia E65 and I couldn't be happier with it. Fantastic phone.
However I can't connect it to my PC (Windows XP SP2) via the USB Cable...it just won't recognize it. I installed PC Suite with the latest cable drivers and nothing happens. When I connect the cable to the phone it asks if I want to use "data transfer" or "pc Suite" mode, but neither of them work.
I'm able to connect to PC Suite via infrared, and that works fine. But I want to update my firmware and software updater only works via usb cable.
Any ideas on what to to?

more info needed, suite version, cable type, what is visible in pc device manager when you connect phone, what is visible in phone screen when you connct cable, etc.

Printer won't connect via USB

Bought a brand new iMac, and have a Brother HL 2230 printer only 1 year old. I installed the lastest driver from Brother website...had printer connected and working. It wouldn't stay online though when computer went to sleep etc...so i had to keep resetting the printer or unplugging and plugging the USB back in. Now the printer was offline and nothing would work. Deleted the printer and now i can't get anything to connect. Computer doesn't recognize at all when USB is plugged in...printer has been reset multiple times, re-installed the drivers, deleted other items from other support suggestions, reset the printer settings and computer...still don't get anything. Completely out of ideas and don't want to buy a new printer!!

Hi there @Milliecat, welcome to the forums
I read through your post about the troubles you are having with connecting your printer to your Windows Vista PC, via USB connection.
I am looking for some more information from you, to help me better research the issue and determine which troubleshooting steps I should recommend for your issue specifically.
1. Do you have the Deskjet 2540 or a different model of printer?
How Do I Find My Model Number?
2. When you run the installation disk or download, what exactly are the errors or issues you see happen during the installation? (If you could send me a screen shot of the error, that would be a bonus).
3. Have you tried to install the printer on your PC using a different connection method, such as Ethernet or Wireless?
4. In the meantime, try running the Print and Scan Doctor tool which may fix the problem. If there is a more serious issue, the tool will alert you to it. Please let me know the results or send a screen shot!
Have a wonderful Friday!
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

TX won't connect via USB - Windows "disconnected hardware" sound effect repeats continually

I've had my TX for over two years now, and this month I've encountered an unusual problem. When I try to connect the Palm to a USB port (any port), the Windows sound effect that indicates a USB device has been detected stutters quickly on one tone (three quick notes), then after a few seconds of silence, it plays the normal disconnected sound effect immediately followed by the three-note monotone stutter. This continues in and endless loop with neither my PC nor the Palm showing any other signs of it being connected.
Has anyone seen this problem before, and does anyone have any advice? I've tried soft resets and re-installing the Palm software on the PC, but to no avail. I cannot even use the Palm as a SD card reader because the Palm won't connect at all.
Post relates to: Palm TX

helo..
try to check the link for some steps
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=9,E=0000000000177854458,K=5095,Sxi=19,Case=Obj(36950)
Post relates to: Palm TX

TS2771 Ipods no longer connect via USB after using a USB 3.0 for the first time

After trying to connect my Ipod Nano (2nd gen) and Ipod touch to my new computer that has USB 3.0 they both will no longer connect to anything via USB (ipod docks). Is this problem fixable? They still play music via the heaphones.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

Cannot connect to internet after airport firmware upgrade

I bought a new Airport Extreme Base Station, hooked it up, and it worked just fine. Then it asked for a firmware upgrade, which I installed. Now the base station will not connect to the internet. I've tried re-booting my cable modem, re-starting the base station, etc. No luck. Pending an answer to this question, I re-installed my prior Airport Extreme base station, and it worked just fine. It wants me to do a firmware update, but I'm understandably reluctant.
Thanks for your help.
Bob

Thanks Chris. One of posts in this thread mentioned the possibility of a corrupt file in the operating system. I reloaded 10.7 using a flash drive I made and then did a hard reset of my Airport Extreme. That solved the problem. I hope this helps.
Don

Trouble: e61i won't connect via usb anyway

First, after buy I made a hard reset erasing all data (*#7370#).
Some time passed, I installed some programs, syncronized contacts with outlook. After several restarts (turn off, then turn on, eg at night or when I did not need the phone to be on) and some other undefined conditions the phone does not offer to choose to connect as pc suite or usb mass storage when the usb cable is attached. And the pc does not make any reaction on the connected phone - like nothing is happening.
This is a very serious problem for me since I loose opportunities, time and as a result - money.

helo..
try to check the link for some steps
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=9,E=0000000000177854458,K=5095,Sxi=19,Case=Obj(36950)
Post relates to: Palm TX

My iPad won't connect via cell after installing iOS6 and may now think it is an iPhone!?!

Question pretty much says it all...
I upgraded to iOS6 and now I cannot connect to anything using cell/3G/4G. Error messages say odd things like 'Your iPhone is not configured properly'. Odd that an iPad would say this!
So I CAN use the iPad For now via wifi but when I turn on the cellular data under the main Settings screen, there are no options/buttons to access my AT&T data service, check my account, etc, like would normally be there with iOS5. The poly options available are to either turn on cellular data and to set SIM PIN..
When I turn on cellular data, it goes to 'Searching...' in the upper left of the screen as it would normally do if I was out of range of a cell tower or something and just keeps 'searching'.
So...any thoughts? I'm unable to find a place to look at my AT&T data account anywhere under settings to verify that it exists and the iPad is 'touching' it.
I'd prefer not to wipe clean and start again from last restore but I am at the end of my creative and technical capabilities.
Ideate away!
MG

I have the same problem with iPhone 3GS, it wont connect to cell data after update to iOS 6.
everytime i want to connect to internet with any apps on my iPhone, i have to connect from a Wifi first.
this is frustating...
are there any solution for this?

My iPhone won't connect to iTunes, after the new update. What should I do?

How do i get my iPhone 5c to connect to iTunes. It was just fine before the most recent update!

Hy there,
In order for you to solve this problem you have to follow these stept if your running windows:
1'st step is to go into the device manager
2 step is to go to portable devices (it is rught under network adapters)
3 step is to right clic apple iphone and click update drivers
4 step is to brows your drivers from C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
After that your itunes will pump up alown and youl see your iphone right there.
Good luck and sry for my bad righting.
Andrei

Express will not connect to network after Extreme firmware upgrade to 7.2.1

I got the auto update notice for a fimware upgrade to my Extreme to 7.2.1. Once I upgraded I am no longer able to connect my Express. I have done all the resets and have gone through all configuration each time, but after it resets itself after configuring it, it no longer shows up in the AirPort Utility until I reset it again. The only thing unique about my Extreme config is that I have the Radio Mode set to 802.11b/g compatible. This was necessary to connect TiVo wireless USB adapters to the network.

I can tell you that you are not alone - I have tried to crack this one for some days - Im just following the instructions from the Airport assistant and it dosn't work

Why can't my ipod connect via usb?

I have a 5th generation that won't connect via usb to anything.
only charges via firewire.
any ideas?

iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

TS2756 I can no longer connect via USB/service missing

..& my iPhone does not show up on the list anymore. I can still use Wi-Fi, though. I would like to be able to use the USB connection again. Resetting the network settings doesn't help. BTW, I'm using it with my MacBook Pro running 10.7.5 and my iPhone has the latest iOS update as well.
When I first got the phone, I always used my internet connection via USB, but then it started giving me trouble. I tried all kinds of suggestions that I found here and it was a real crap shoot -- sometimes it worked, and sometimes not. Now it just won't work at all. I recently deleted my iPhone from the list of services thinking that the next time I plugged it in, it would recreated the service. It did not. So, I'm still using it as before: just connecting over Wi-Fi (the network is still available, it just doesn't show up in my list of services on the left-hand column under "network").
Anyone have any suggestions that they know will fix this?

Hi DaveX83 and welcome to the discussions.
A few things to try.
Press the reset button once on the back of your Extreme and let it restart. Check for proper operation.
If no help there, keep the ethernet cable connected, and open Airport Utility. Click on Manual Setup near the bottom of the pane. On the next screen click the Airport icon at the upper left of the pane, then click Wireless in the line just below that reads Summary - Time Capsule - Wireless - Access.
Check to see that your wireless is set up, security set up, passwords, etc. You may need to reconfigure your wireless settings again and update the Extreme to store them and restart.
Hope this helps.

Daisy chain two external drives via Firewire, then connect one via USB to the TC?

Hi,
I have two external drives that have both Firewire and USB ports. My 1st generation 500 gb Time Capsule (maybe all of them?) only has USB ports so up til now, I have connected one or the other drive via USB. (I've tried to connect both to a powered USB hub but one drive has problems showing up. At this point I only use the one drive that shows up and connect it directly with no hub to the Time Capsue.)
My question is: Can I daisy chain the two drives via Firewire and then connect one of them (probably the one that has no problems connecting with USB) to the Time Capsule via USB?
Second, somewhat-related problem...
I don't know why one drive isn't connecting very well when directly connected to the Time Capsule. Both are Fantom drives. One is a 1TB, the one that has prblems connecting is a 250GB. I've tried connecting directly or through a powered hub. The 1B has no problems, the 250 gb won't show up most of the time and disconnects itself fairly quickly if it does connect. I've switched cables; that hasn't helped. The 1TB stays connected most of the time but sometimes it disconnects too. I suspect the Time Capsule just isn't able to deal with external drives so I don't puch it. It would be nice to be able to have both drives accessable through the TC though.
Thanks for any help.
Cheers,
John

Doing some experimentation, connecting the drives directly to the MBP:
- Neither of the two drives Firewire daisy-chained and going through the powered USB hub connected to the MBP mount. I was using old aliases on desktop.*They don't show up on network otherwise. (Each drive self-mounts with both Firewire and USB direct connections.)
*Even after making new aliases, neither drive will mount using their new aliases when directly connected (not through hub) with USB or Firewire (and Thunderbolt adapter.) That's weird.
- Both the 240 gb and the 1TB drives going through powered hub connected to MBP mount by themselves.
- Two drives daisy-chained via Firewire and one drive connected to the MBP via Firewire (and Thunderbolt adapter) self-mount. No surprise there but that doesn't help me as I want to have the drives further away from the MBP and connected to the Time Capsule, which doesn't have a Firewire port anyway...
- All of the USB and the Firewire cables work as does the Thunderbolt adapter. I tested them.
I wonder.... I have a Firewire to what appears to be an Ethernet connector. I wonder if that would be any good. I'm afraid to try it though...

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you

My BB 8520 won't connect via USB after the firmware upgrade

Similar Messages

Maybe you are looking for