My BB Bold 9900 / 9930 says Insert Sim Card even when there is a sim card inserted

I've been using this simcard with my BB Bold 9930 for  5 months now and then 2 days ago my phone opened at the blackberry protect log-in pagethat happens when you use a new simcard (which I didn't). so i entered my username and password but then it will show that the username and password doesn't match but when i opened it in my computer and checked it.. it was a match. so i tried switching off my phone and then opening it again but then it will come out again and then again doesn't recognize my password.. i've been doing this until i reached the last attempt where after which they will disable your account for 15 minutes before you can try again. so what i did was to wait and try again until i was able to open it. it was working until yesterday when i restarted my phone again and then after a while the log-in page appeared again but this time it accepted my password then an "initializing sim card" appeared on my phone for a while after which the Insert sim card sign was there. so i tried turning it off and removed and re-inserted my sim card for 6 times it keep saying insert sim card everytime i open it. so i tried using another sim card of my friend which is the same network as mine and inserted my sim card on another phone! my simcard worked on the other phone and so as my friend's sim card worked on my blackberry! i don't know why my blackberry doesn't recognize my simcard! i can't switch to a sew simcard (number) because i am on a postpaid line now and it has a contract for 2 years, so i couldn't throw it away and use a new one! 
Help anyone pls. how could i make my simcard worked on my blackberry again! Thanks!!

If you're having issues with your SIM card, Globe Telecom should allow you to swap it for another at no cost to you.  Explain your experiment of exchanging SIM cards with your friend and how another SIM card worked fine in your phone.  This is clearly a faulty SIM card so it needs to be exchanged, no two ways about it.
If Globe is unwilling to do a simple swap, which any other carrier worldwide would gladly do, tell them you'd like your issue escalated to RIM for resolution because you're obviously not getting anywhere with them.  Carriers would prefer not to escalate so they might give in and give you a new SIM card.  You shouldn't have to pay for it, either.
I hope that helps you. 
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

  • I recently updated my iphone to version 5, but when before i could activate it to update, i need stc signal and my iphone keeps showing no service, even when there is a sim installed.

    please help me
    my problem is given in the headline

    You cannot go back
    Basic Troubleshooting
    Reset
    Restore with back up
    Restore as new
    After updating did you reset the iPhone ,if not it is like not rebooting after an update to a PC

  • HT4623 what do i do when the phone tells me to insert sim card, when there's a sim card in it already

    what do i do when the phone tells me to insert sim card, when there's a sim card in it already

    Hello there, DJ Makobi.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/TS4148
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My phone displays "Network search". Current time and date. When the SIM is inserted and when there is no sim

    My phone displays "Network search". Current time and date. When the SIM is inserted and when there is no sim.

    Hi, AlexKot.  
    Thank you for visiting Apple Support Communities.
    It sounds like you are experiencing an issue with your iPhone searching for service.  If you have not resolved this issue, I would recommend trying the troubleshooting steps in the article below.
    If you see No Service or Searching in the status bar of your iPhone or iPad
    http://support.apple.com/kb/ts4429
    Cheers,
    Jason H.

  • Aperture wont open and says "repairing library database" even when 100% complete it still wont open

    my aperture won't open and says "repairing library database"  even when it gets up to 100% complete it just suts there frozen and won't open to the aperture screen

    How many Images?  How much storage space does the Library occupy?  Do you have plenty of free space on your system drive?
    Ignore the progress bar — it's often stuck, and therefore unreliable.
    Ignore Activity Monitor reporting Aperture "Not Responding".  This is, imho, a bug Apple should have squashed years ago.
    Repairing (or doing any operations an entire Library) a large Library can take hours or days.  You did not report what you did to get past 79% — I'm going to guess you Force-quit Aperture.  Force-quitting any database is always a bad idea and should only be done as a last resort.  Each time you force quit, you are likely adding to your problem.
    Restart the rebuild, and let it run, unmolested, for at least 40 hours.  IME, at some point the progress bar with jump to 99%, then 100%, and then stay there for perhaps a few more hours, and then it finishes.
    I have _never_ had a repair or a rebuild (I have not had to do many rebuilds) _not_ finish.  One took about 82 hours, but it finished.
    If your Library is small — say, fewer than 100,000 Images _and_ smaller than 100 GB — and you're seeing these very long rebuild times, you likely have an actual problem — but the only way I know to find out is to let the rebuild continue.  (I don't store any but small video in Aperture, and very few of them, so my numbers may not correspond to Libraries that store videos.)
    Did you notice any other problems before Aperture itself recommended rebuilding?
    In short: let it run unmolested.

  • Whenever I try to purchase an app it asks me fill out my details, Ido this then it says its timed out even when I do it quickly

    Whenever I try to purchase an app it asks me fill out my details, Ido this then it says its timed out even when I do it quickly

    Just what happenede when you signed out and signed back in in Settings>iTunes and App Store? What does "fail" mean?

  • Cannot get Flash player to work , it says plug in blocked, even when trying to download latest version it still says the same

    cannot get Flash player to work , it says plug in blocked, even when I download the latest version of Flash Payer it gives the same message, what do I do to unblock the plug ins?

    You cannot use OS9 to repair your 10.4.11 Disk. Did you delete Disk Utility? Are you sure it's not in Applications>Utilities?
    Tough without the Install disc, but some things to try...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214

  • Cd icon shows even when there is no cd present. I tried ejecting it and inserting another cd and the cd gets ejected. what is the solution to this

    icon shows even when there is no cd present. I tried ejecting it and inserting another cd and the cd gets ejected. what is the solution to this

    Jailbreaking iOS can't be discussed in this forum.

  • My mac won't save to a flash drive. It always says the disc is full when there is plenty of space. Solution pls?

    My mac won't save to a flash drive. It always says the disc is full when there is plenty of space. Solution pls?

    Hi and welcome to Apple Discussions,
    Did you get the flash drive from a reliable source. There are some available on the net that show a large capacity but are only 512 mb. or 1 gb. drives that have been altered to display a much larger capacity.
    Good luck,
    Alan

  • My phone displays "Network search". Current time and date. When sim sim svtavlena and when there is no

    My phone displays "Network search". Current time and date. When sim sim svtavlena and when there is no.
    Мой айффон постоянно пишет поиск сети, даже если достать сим карту. Дата и время тоят правильно, сброс сети я пробовал, не помогает.

    Hi, AlexKot.  
    Thank you for visiting Apple Support Communities.
    It sounds like you are experiencing an issue with your iPhone searching for service.  If you have not resolved this issue, I would recommend trying the troubleshooting steps in the article below.
    If you see No Service or Searching in the status bar of your iPhone or iPad
    http://support.apple.com/kb/ts4429
    Cheers,
    Jason H.

  • HT201210 i updated my iphone 3gs and now all it says on the itunes screen this phone is unrecognised, then it will say there is no sim card installed even though there is a sim inside the phone

    i updated my i pad with ease then updated my i phone and now apple does not recognise the i phone and then says there is no sim in the phone when there is one installed, can anyone help

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • IPhone 4 always searching for Network even if there is NO SIM inserted

    I am facing trouble in activating my iPhone after restore. I am trying all possible reason to find out few things:
    1. After restore my iPhone 4 is asking to connect iTune and when I am connecting it fails and says "There is some prblem with your iPhone". I think I can activate the phone over WIFI network but it never reach till that page. It goes to Language>Country>Connect to iTune and then it fails.
    2. Even if I remove my SIM from iPhone, it is still searching the Network and doesn't understand and notify that "NO SIM".
    My iPhone fell once and it was all fine but it asked me to reset the phone and I did...since that time I nevet been able to activate my iPhone but rest of everything is just fine and there is no physical hardware damage to the phone.
    Also, I am based at Saudi Arabia and we dond't have Apple Store / Genius Bars to visit.

    I do have an avtive SIM and it is Post Paid Connection which is activated and no problem with SIM.
    I have to try only activating only by connecting to iTune as my iPhone asked so and it doesn't leave any option for me. Once I do that it is showing me the error attached to this post.

  • Insert data to MySQL when there is new data in the text file

    I have one log file, the log file will update its data (alarm type & datetime) when there is alarm. If I would like to write program to monitor the log file every minute, and insert the data to mysql when there is a new data in log file. Any Idea how to use java to write it ?
    Thanks !

    imagination21 wrote:
    Any Idea how to use java to write it ?Yes. But do you have a specific question? What's the problem?

  • IPhoto churns, then says iPhoto quit unexpectedly, even when I've tried restoring it.

    IPhoto has crashed.  It churns then says iPhoto has quit unexpectedly even when I tried the command/option open and restore.  When I have searched for it other places, it says, "iPhoto on locked volume. Reopen when you have read/write access or reopen IP with option dey held down to choose another library." Nothing I have tried has worked.

    Couple of things to try:
    Restart your mac and try launch iPhoto again.
    If that fails:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a file called ‘iPhoto’Lock.data or similar. Drag it to the Desktop. Make no other changes. Start iPhoto. Does that help?
    If not: Where is your iPhoto Library stored? If it's on an External Disk, what format is that?

  • HT201407 i just update my iphone 3gs to ios 6.0.1 and after that its not working.... i activated it again to restore but then it will say please insert sim card even though there is sim card inside.pls help. i need to use my mobile.

    please help

    LOL! - you poor bugger, Ognyan!
    I'm starting to serihously think this phone has been jailbroken... I've got a senior technical support advisor at Apple who is working on the case. He has gone through everything he can possibly think of, but won't take "no" for an answer.
    At the moment, he has logged everything with the Engineering Department, who is going to look into it further using the IMEI number and see what they come up with. If worse comes to worse, Apple will apparently replace the phone for a fee. The problem is that it is 800+ days out of warranty...
    Anyway, we'll see how we go. If anybody has got any ideas about this, please continue to provide answers. I appreciate all responses

Maybe you are looking for

  • Passing variables to server is not working

    I am new to action scripts, so I'm not even sure where to start. I have bits and pieces that I know work, but am not sure why the action script and the php file on the server do not seem to be talking correctly to each other. The action script seems

  • Can't print to Canon iR C4080

    I'm running 10.6.4. I am trying to add the Canon iR C4080 that is at my office so I can print to it from my MacBook Pro. I downloaded the latest driver from Canon's website and successfully installed it. I added the printer via System Preferences usi

  • Queries on cluster installation with win2k3 & Oracle 10.2.0.4.0 for 640 rel

    Dear All, We are in a process installing sap clustered system for 640 basis release o win 2k3 with Oracle 10.2.0.4.0 However i have followed this steps as below.. Install windows on NODE-A & NODE- B, Update windows, Install required hotfixes which co

  • Wizard Report

    Hello All! Ok, here's the situation ... I'm working with the Drill Down Report tutorial (http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/rprt_drill.htm#CIHGBADI). This tutorial shows you how to create reports using the "Wizard Report".

  • Strange Results on Speedtest Since Powercut

    Hi all we had a powercut on our estate about 10 days ago power was off for about 3 hours once all back up and running was a bit worried about my infinity 2 speeds went on to btw speedtest was coming back with usual speeds 61 down around 15-16 up but