My bb curve 9380 shutdown and a red led lighting

my bb curve 9380 shutdown and a red led lighting i don't now what hapned but i just modify some apps bay bb desktop softwere please help me and thx verry much

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
If the problem is revealed via the above tests to be your BB, then I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

BlackBerry Curve 9380 will not power ON and the red LED light is flashing

I need you guy's help. I was charging my BlackBerry Curve 9380 this morning. When I was about to use it the found out that the screen will not light up but the red led indicator is blinking one long blink, one ong blink then a full stop. I have already tried removing the battery and sim card for sometime but to no avail. What should I do?!

You need to consider updating/reinstalling device OS. Check the below knowledge base article -
KB03621 How to clean reload BlackBerry Device software and applications using BlackBerry Desktop Software
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

BlackBerry Z3 does not Boot, red LED Light is flashing 1x long and after 6x short

After updating my Blackbery Z3 to 10.3.1.1779, my device won't boot and  red LED Light is flashing 1x long and after 6x short. Need help to solve the issue. Thanks in advance.

Thank you for your update.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Red Led Light

Hi, I have bought this laptop which is fairly new, just under a year. Although now, there is an red Led light on the side of my laptop when I plug in my Ac Adaptor to charge the battery and it is not going. The Led Light was always a bright white light but now it just stays red and I dont know why? Is there a problem with my laptop? because it is working fine. I dont know how to solve the red led light or what it means. I hope I can get some information about this. Thank You.

jpdvid-
Did you try starting the Mac back up after installing the RAM and before installing the card? Many times a PMU reset is needed after RAM is installed.
Which model of Rocket Raid card are you installing?
Luck-
-DaddyPaycheck

Red LED Light Remains On

The battery is fully charged and disconnected from charger. When hibernating, the red LED light constantly remains on. When the phone is being used, the red LED light does not appear.
What is wrong? How can this be fixed? Thanks much for help.

I'm a total newbie to smartphones. Based on your question, I cleared all the Notifications and the red LED disappeared. Then sent myself an email to test the blue LED light and it is now blinking. So, the problem might be solved but don;t know why the red LED constantly displayed after charging the battering to 100%.
Don't know about Lightflow!
Thanks

Turn red LED light off

Is there an option or registry edit that will turn off the red led light that dots the "i" in ThinkPad on the top of the laptop? I have a SL500.

Hi adoman,
I suggest putting following sticker on it, you'll never notice it's there:- http://cgi.ebay.com/Original-IBM-Lenovo-Sticker-11-x-30mm-127_W0QQitemZ350223067619QQcmdZViewItemQQp...
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Sony Xperia M2 flashing Red LED light and wont turn on.

Okay so i have been having this problem for about a week.I tried turning on my phone the other day but it wasnt doing that so i thought maybe it ran out of battery then i let i charge for a couple of hours and left it untouched.When i came back my phone was flashing a red light and the sony logo would apear and my phone would vibrate but then it would shut down again.This has been happening for all week i let it charge overnight but still the same thing happens flashing red and vibrating.Sometimes the light dosent flash and i can turn my phone on for a while but i never know when it could randomly shut down.i tried using the Pc companion program to try and fix it but my phone wont stay on for long enough for it to be able to do that.Any tips on what i could do ? the last thing i wanna do right now is call sony so please if you know any possible way of fixing this let me know

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Have you tried to power on the phone without SIM- and/or SD-card to see if this can help? Otherwise, a software repair via PC Companion would be recommeded:
http://support.sonymobile.com/global-en/tools/pc-companion/
In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it. When you are going to connect the phone, the phone should be completely off. Hold the ON/OFF button + volume up(+) for 10 seconds.

HELP! BB Pearl 8130. Solid Red Led Light. Won't go away.. HELP!

My LED has turned a solid Red color. It's on all the time and is only off when I pull the battery out. My phone does still charge. I've done everything to get rid of it even wiping my blackberry and upgrading the software. I read something about Blackberry Music Gateway? I do use my pearl to listen to Pandora everyday and iheart radio with a 3.5 cable that plugs into the dash of my truck, but it never did this before. Any help would be greatly appreciated!
Thanks!
Justin

Justin, so you've wiped the device completely and reloaded a new OS... still does the same. Anytime the BlackBerry is powerd on, the LED lights up RED?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mysterious red LED light inside my G4

Could someone tell me what the red light means on the inside of my G4?
It can't be seen from the outside.
I am having a problem with my firewire ports not working. Is this a warning or alert of some kind?
Help! I really looked and can't find this info anywhere!

From the G4 Service Manual:
Logic Board LEDs: Power Mac G4 (AGP Graphics)
There is one red LED on the Power Mac G4 (AGP Graphics) logic
board. It indicates that there is power to the board and does not imply a fault condition. Hardware such as DIMMs and PCI cards should not be installed or removed when the LED is on.
Cheers, Tom

4 Red Led Lights - Please help

the other day I left my computer on for a few hours and when I came home and moved the mouse it wouldn't come out of standby. To get it to shut off, I had to hold the power button down. Now when I start it, the fans start spinning, the DVD drive spins for a second and a few times the orange light on the monitor turned green. But after about 10 seconds, it shuts down.
I have the 4 red lights on the LED, so I swapped in a new PS - Enermax 550W with 36A on the 12v. Still same thing. So I'm guessing either the CPU or the board. I built this about 6 months ago. It's not overclocked and it was idle during the time I left it. Any suggestions?

Yes and no. I know that is confussing. However go to this first as you may have had a problem right along and did not know it nor would you without testing. Memtest86 is a great way to test memory. The no part is that it could be something else. But hey you have to start somewhere.
As for the timings in RAM you need to go to Corsairs page and check the exact model on their charts. Also be sure to read any side notes as they may have specific timings for your A64 versus other CPU's. It can be different as the memory controller is on the CPU in our case instead of on the MB.
Corsair also has tech support that can walk you through memory timings if you don't follow them at all.
You can also have some other thing in the system that went bad even as simple as a HDD cable that came loose. To troubleshoot sometimes the easiest way to find out is to unplug anything that is not needed to boot.
But start with the memory as the 4 Red LED's indicate.

Playbook will not charge, no red LED light

The Battery charge said 3%. I turned off the playbook and plugged it in and left it to charge with the LED lights showing. I went to retrieve it, only to find out it's not turning on. No red light appeared. nothing. I went and plugged it in and then tried turning it on Nothing.No red light...just dead. PS: I just got the Playbook from relative without the manual and all so i'm not sure about the DO's and DON"T's of using the tablet. Please help!!! Thanks in Advance.

Your battery is dead. http://www.blackberry.com/btsc/KB27705
Try this:
Connect the charger that came with the PlayBook and plug it into the wall. Hold down the Power Button only for 20 seconds. Leave it for 4 minutes, then unplug at the wall, wait a minute, plug it back in again, hold down the Power Button only for 20 seconds.
Repeat this process about 10 times and hopefully, your PlayBook should go into a high charging rate. Leave it plugged in overnight and you should have a full charge by morning.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

IPhone won't turn on and a blue LED light before

When I picked up my iPhone to use it this strange LED light came on whenever you have flashlight on or camera flash on. All of a sudden it turned off and then I plugged it in and it acted like it needed to be charged and then it turned on. While the LED light is still on. I closed out flashlight and went to the camera app. When I opened up the camera app even though the flash was set to off the LED light went off. Then it showed the warning sign that my iPhone was overheating. It later shut off and my dad told me to hold the power button down for 10 seconds and then something was suppose to pop up I guess? I don't exactly remember what he said. But now the apple screen shows up for a few seconds and then it shuts down for another few seconds. I don't know what to do because it won't even turn on so I can restore it. HELP!!!

Have you tried to charge the phone? Plug it into a charger and leave it there for 30 minutes.
Then try to turn it on again and see if that works.
If the light was left on too long I "guess" it could cause the phone to get hot but probably more for a rapid discharge of the battery.
Let me know how you make out.
Fred

9380, updated and now red light flashing and won't turn no!

Hey,
Can anyone help???
Did a software update tonight, now my 9380 won't turn on.
Nothing, not a dodo, apart from the red light blinking twice. Not even showing that it;s charging. Have taken battery out etc, but still nothing!
Arrrrrrrrrrrrrrrrrrrgh!!!
Cheers
Gem

Hi and Welcome to the Community!
(Credit JSanders)
There are two methods of recovery for you to try:
One:
Open Blackberry Desktop Software & Connect your device with PC using USB cable, without inserting battery.
You will get three option Retry, Update Or Cancel, then click on update.
Once it is to the stage of the update "initializing handheld", then insert battery.
If this does not work, and you remain stuck on the backing up the Social Feeds database, go to the second method below.
Secondly:
Start your BlackBerry in Safe mode. Article ID: KB17877 How to start a BlackBerry smartphone in Safe Modehttp://www.blackberry.com/btsc/KB17877
Connect to the BlackBerry Desktop Software and allow your handheld to connect. If you are prompted to upgrade, cancel the upgrade for later.
IF you cannot connect or your Desktop Software does not recognize your device while in Safe Mode, please follow the directions here to force the detect:  Article ID: KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
Go to Device > delete > SELECT DATA > select to delete both the Social Feeds and Smart Card databases, and follow the remaining prompts to complete it.
Now, you can return and click to upgrade the device through the Desktop Manager, or reboot the BlackBerry in normal mode and continue the over the air upgrade.
If these do not work, there may be one even more drastic thing to try...
KB27956 How to recover a BlackBerry smartphone from any state
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

When I use an another charger my z10 gets off and when I switch on ot wont on and the red led conste

iam stuck In an error

Ok. Did you try the genuine BlackBerry charger? Or do you not have one?
First troubleshooting step is try the charger that ships with the device.
- Ira

Phone stuck on loading screen, red LED flashing, will not turn on.

So I just bought this phone two days ago and have not dropped it or anything, it keeps flashing on the loading screen then just turns off and the red LED light goes off like I am receiving a message. It will not start up, i've tried charging it some more, i tried removing the battery and yeah.. i'm just not sure what else to do.
I've had a horrible time with this phone(The guy I purchased it from told me it was activated, then when I called virgin a day later they told me he forgot to...), and im really not sure what to do, please help :/
Thank you, any info is appreciated.

We can certain try troubleshooting. I know that some people may just prefer to send it back if it's not working when they first get it. The steps to reload the OS are as follows:
First download and install the Desktop Manager from here (4.7 without Media Manager is recommended): https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Next download and install the handheld software from here: http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Afterwards try reloading the OS by connecting the device to your computer, open the Desktop Manager, then go into the Application Loader. This will open a wizard that steps you through reloading the OS onto your device. More detailed steps can be found in here:
http://crackberry.com/blackberry-101-how-install-or-upgrade-new-rim-operating-system-os
If the device isn't recognized when you plug it into the computer then try using the following 2 methods to reload the OS:
http://www.blackberry.com/btsc/KB03485
http://blackberryfaq.net/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

My bb curve 9380 shutdown and a red led lighting

Similar Messages

Maybe you are looking for