My BB Pearl's 9105 trackpad won't work!!!!

Somebody help me out on this! My BB Pearl's trackpad is not working! It won't scroll and select neither! Gosh! What should i do about this? Help me please! Pretty please!

At three months old, I'd suggest a warranty replacement from your seller.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • My Pearl keeps restarting and the trackpad won't work!

    My new Pearl 9100 keeps freezing and then restarting on itself. It's super annoying because this happens about every hour. When it restarts the entire trackpad won't work, even the button. The only way I've been able to get it to work again is to restart it until it does! It usually takes about 7 restarts until the entire trackpad will work, then it restarts again.
    Is there any suggests on what I should do? And I'm still on warrenty but Bell said they couldnt do anything about it  

    Have you already tried the following steps to reload your device software ?
    1. Verify that the Desktop Manager and BlackBerry Device Software are installed on the computer.
    2. Remove the battery from the BlackBerry. Do not re-insert.
    3. Connect the BlackBerry to the computer.
    4. On the BlackBerry Desktop Manager main screen, click Application Loader.
    5. Click Start.
    6. Click Options to select applications to be installed.
    7. Click Next.
    8. Click Next.
    9. Click Finish.
    10. When the application load starts, re-insert the battery into the BlackBerry.

  • Magic Trackpad won't work with Magic Mouse on brand new 2011 27" i5 iMac

    I have a brand new 2011 27" i5 iMac which I bought with Snow Leopard pre-loaded. Naturally, I included the new Magic Trackpad in my purchase, and though there were some problems with the device in SL - such as it going haywire without explanation - it generally worked, although battery levels were erratic (one day 80%, then an hour later 42%, then 80% again).
    When I installed Lion I did a clean install after backing up to Time Machine - and a Super Dupered external drive. I had some difficulties trying to install Lion from an external flash drive so I deleted again and reinstalled SL, then reinstalled over the SL install I did (with no other software except Mac OS X 10.6.8 and other system updates to facilitate install). Rather than copying apps from my old SL drive, I downloaded fresh copies and reinstalled one by one. I don't use a lot of apps apart from Microsoft Office, browsers and iLife and have not installed any additional scripts, extensions or add-ons (like USB Overdrive). It's a pretty clean install.
    Since then, although I'm generally happy with Lion, the Magic Trackpad won't work! It does work for a little while with basic gestures - mainly moving the cursor and scrolling - then it gives up the ghost and loses connectivity. I have done the following:
    Disconnected and reconnected the MTP after turning it on and off. MTP works for about two minutes, goes crazy then no response.
    Shut the computer down, pulled out the plug, waited two minutes, then started up again. MTP works for about two minutes, goes crazy then no response.
    Run Onyx, shut down computer, then pulled out plug (see above).
    Checked options in Universal Access, shut off "Ignore other devices when trackpad in use" (or whatever the option is). MTP works for about two minutes, goes crazy then no response.
    Turned off the Magic Mouse. MTP works for about two minutes, goes crazy then no response.
    But none of this seems to work! I know the MTP is connected because I can see it in the BT menu in the menu bar and also in System Preferences. I have noticed since upgrading that my permissions - which when I bought the computer were totally clean - now run lines and lines about "Library/Core Services" so I am unsure whether this is related. I also notice a lot of people are in the same boat as me, which makes me wonder if it's either a hardware issue or a release issue - after a week or so of totally silent running, my 2TB Hitachi HDD started up with the grumbly tum. I'd really appreciate any tips from anyone out there!

    Hi, marksaner
    You could try installing the latest version of the Synaptics driver. Synaptics is the company that makes the UltraNav driver and drivers for many other computer brands. This driver should have the same functionality as the UltraNav driver, so there's no worry there. You can find the driver here. 
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • My Magic Trackpad won't work on my Mac Mini?

    My Magic Trackpad won't work on my Mac Mini? The cursor moves a little and then will not respond at all. Gestures do not work

    Yes, it's one of the things that can interfere.  Here are some others including airport.  Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
    http://support.apple.com/kb/HT1365
    Captfred

  • Touchscreen and trackpad won't work after installing new OS

    i want to ask why that after i upgraded my os, and during the start up when i have to scroll down the aggrements text  my trackpad and my touchscreen won't work. is that any way to solve this problem? i beg you to answer my question please. i would be very grateful. thanks

    Did you actually upgrade to OS 7.0 or to OS 7.1?
    What OS were you previously on that you want to downgrade to?
    For the application in question, go to Options > Device > Application Management. Find the app and delete it.
    Now, go back to AppWorld and install it again and see if it works correctly.
    For most apps that I know of, if they worked correctly on OS7, they will be fine on OS7.1
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My trackpad won't work and is selecting everything it passes by

    my trackpad isn't working at all

    Captfred got it. If you really like the tap to drag (which I do) just remember all you need to do is a) train yourself to gently apply your finger to the pad abd b) when you don't, tap again to undo the dragging.

  • I upgraded to Mavericks and now the scoll on my trackpad won't work. It works in Chrome, the finder, or MS suite. Only FF doesn't work.

    The question has pretty much all the details. I'm running latest FF and Mvericks and the scroll/backward/forward function in the trackpad doesn't work. I can scroll in any other program, just not FF.

    You're welcome atlantisflygirl.

  • Trackpad won't work only on word

    My trackpad will not scroll down on word. It works perfectly fine except when I use word.

    sorry posted before finished and can't find edit button
    anyway - it scroll but that it - won't do anything else - and green light is off

  • Magic Trackpad won't work properly

    In the bluetooth preferences my magic trackpad connects, but in the trackpad preferences it doesn't show up. What's going on?!
    I can use basic mouselike functions with my trackpad, but since it won't show up in the trackpad preferences I can't use it do anything "magical". That renders it usesless. (I can use an old-fashioned mouse to do that)
    I'm usig a new iMac (quad core) with system 10.6.8. In the trackpad preference it says "no trackpad found". If I restart the trackpad it can be found, but when I click "continue" it disconnects. Then I go back to the bluetooth preferences to see that it's still connected! Like I said, I can use the most basic functions, but only those basic functions. Very frustrating...
    The batteries are good and I place the trackpad right under the computer monitor to avoid interferrence, etc. Is it possible there's a software glitch somewhere?!

    I'm guessing that, if you don't know what USB Overdrive is, you probably have not installed it. It is not something that comes with your computer. Here is is a link for USB Overdrive:
    http://www.usboverdrive.com/USBOverdrive/News.html
    If you have USB Overdrive installed on your computer you will see it as and icon at the bottom of the "System Preferences" window. If you see it there, you can click on it to open its control window and delete it from there. But like I said, I'm thinking that's probably not your problem. Still, go take a look at the bottom of your system preferences just to make sure.
    I'm wondering, though, if you installed any other software for a mouse, or other type of controller, maybe it would cause similar problems too. Maybe you should check for other things you may have installed (?).

  • Win7 and Bootcamp 4 - trackpad won't work

    I have installed Windows 7 (32bit) on a mid 2007 24inch iMac. Also installed are Bootcamp drivers (version 4) as directed on the Apple suitability page.
    Everything seems to be fine apart from my Apple Trackpad just won't respond. In Windows Device Manager, there is no Trackpad listed under 'Human Interface Devices' nor under mouse, although 'Apple Mighty Mouse' is listed as this is the only way I can select things in Windows currently.
    I have tried getting Windows to search for a wireless device, but nothing.
    I have seen from other forums that this appears to be a common problem.
    Does anyone have a solution?

    Thank you for your reply Bob. Unfortunately, I don't have any reference to Trackpad in the Bootcamp control panel, which I am guessing means that the driver is not properly installed. This is odd as I am sure that there is reference to Apple Trackpad in the list of drivers that appears in Windows device manager. I am unclear if its possible to either reinstall Bootcamp's Windows Support files or only install the trackpad part of the installation.
    Chris

  • Mouse/Trackpad won't work. What's step one?

    Okay, this is irksome. The Wife's two month old iMac has just gotten a problem which renders it unusuable. The mouse and the trackpad work in the sense that the curser goes across the screen but I have no way of "clicking" anything. I have tried the trackpad, an wired Apple mouse and a cheapo wired generic mouse and I have used all different USB ports for the wired mice. Same thing.  At this point, I pulled the plug and restarted it. Again, same thing.
    I have Apple Care so I could call but I'd like to try to fix it myself before making the phone call. So any ideas?
    Thanks.
    Brian
    (Haven't upgraded to Mountain Lion yet.)

    Hi Brian, try this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Magic trackpad won't work

    My apple wireless trackpad said that it is connected but it wont work. I have changed out the batteries and it still wont work. It all started happening when i put in some other batteries to see if they still worked, then i put in my batteries i just had used and they didnt work.

    Hold power button on TP until it turns off.
    Then turn off your computer.
    Start up your computer, and when you get to the login-screen, turn back on your TrackPad..
    And wait..

  • Trackpad won't work properly in Lion

    Just installed Lion, but having some issues with the trackpad on my 17" MBP (About 2 years old).
    For example:
    *On Dock - hover effects such as magnification and title of the icon doesn't work
    *Resizing windows by pulling lower left corner doesn't work
    *On all standard Lion dropdown menus (for example Apple menu in the top left) has no hover effects and I have to click twice to make my selection.
    *Mouse pointer doesnt change when switching between apps. As I'm writing this I still get the "text editor" pointer while moving away from the Safari window.
    I have a Wacom board installed and it works just fine so the problem seems to be isolated to the trackpad. Any tips?

    Sounds like third party software conflict.
    Does this behavior persist in Safe Mode?
    Starting up in Safe Mode
    charlie

  • Trackpad won't work please help

    Hi every 1 I have a blackberry torch 9810 with O.S 7.1 and everything works fine except for the trackpad it works sometimes other times it doesn't I have tried everything don't know what to do anymore

    Hey pieterjvr27,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    I would suggest following the steps in this KB article to get the trackpad working: www.blackberry.com/btsc/KB29640
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Trackpad won't work with LION new options...Apple said trackpad solid-state and not compatible MACPRO...REALLY???

    So frustrated!! Should have had disclamer that it might not work with OLDER 2008 MacPro...

    It seems to work fine with my March 2007 Mac Pro. Mind you, you're probably overlooking the need for the Bluetooth adapter. I bought a Belkin adapter from Apple Store. UK, cost about GBP10.
    Edit:  This is the baby:  http://store.apple.com/uk/product/TW622ZM/A?mco=MTY3ODQ5OTY

Maybe you are looking for

  • How can I make new finder windows open in front

    Since upgrading to Lion, whenever I open a new window, installer, DMG, etc, it opens BEHIND all the other windows and I have to move windows out of the way in order to interact with application or whatever I have opened. I know this has to be a setti

  • For proxy any coding required

    i have never done any proxies so is there any coding required in ABAP part, i  am using ABAP proxies thanking you sridhar

  • Modify components from multiple waveforms

    I would like to use the "Acquire waveforms" fonction and modify SOME parameters of SOME signals. Note this is the the function that acquires waveformS (plural) and not waveform (singular). Attached is my vi that shows simply what I would like to do.

  • PLEASE HELP urg

    Hardware Description Dell Dimension 2400 With an intel 82XXX motherboard CREATIVE SOUND BLASTER LIVE 5. (first generation I think) CREATIVE PC WORKS 5. (LX 520) I'm having detection problems!!! on my creative sound blaster li've 5. (with sn of c6sb02

  • Indent Purchase Order

    Dear All What is meant by Indent PO?  How it is raised? If I want to delete the Indent PO how can I do it? Note:  During deleting Indent PO I am getting error saying CHECK FOR THE PAYMENT TERMS IN HEADER error no:Y210, How to overcome this error and