My BC hosted form doesn't work?

The submission sections don't show up and the Submit button doesn’t work.

Hi Phil,
This type of issue usually happens if some other object is overlapping with the button. I'd suggest you to check and make sure nothing is overlapping the button. If the issue is not resolved, please provide us the link to the page and we'll further investigate the issue.
Regards,
Aish

Similar Messages

  • Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?

    Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?

    Hi Aish
    I wanted to check the following, but the URL is not found, you have another one?
    thanks
    Nicole
        4. Visit http://my-site.com/scripts/form_check.php in a web browser and make sure you see all green checkmarks. If some items do not display green checkmarks that means that the hosting server is not configured correctly to allow the Form widgets to send email messages to the address you've specified.
                    Contact your web-hosting provider about the server configuration problem. Describe the items that are not marked as green in the form check page, so that they can help you set up the servers to use the correct settings.
    Il giorno 9-set-2014, alle ore 16:11, Aishvarya Raj Rastogi <[email protected]> ha scritto:
    Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?
    created by Aishvarya Raj Rastogi in Help with using Adobe Muse CC - View the full discussion
    Hi Nicole,
    What is the "From" email address in your form?
    Also, have you checked the spam folder?
    Please check the following posts as well :
    https://forums.adobe.com/docs/DOC-3581
    Re: PHP mail may be disabled or incorrectly configured on the web server.
    Regards,
    Aish
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6714281#6714281
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • RC Components Hosted Demo doesn't work

    Hi,
    Question to Oracle people - why ADF Faces Rich Client Components Hosted Demo doesn't work ?
    Kuba

    Hello KUBA,
    It also happened in the Past
    Its still not up, if you need to use adf demo locally on your machine, please follow this thread
    you can find it here. JDev ADF Demo Site Not Working
    Thank you

  • Submit form doesn't work in edge Inspect

    I have a contact form in my web and when i submit a form that doesn't work in edge inspect. Edge Inspect after a short time program stops working unfortunately. Form is not submitting and email also is not send. I have a form and i use AJAX to send form data with email to client.

    To be clear, where are you clicking the send button, in Chrome or on your Galaxy 2? And the application on the phone locks up? For example, you can't click the button in the upper right and see the menu?
    Thanks
    Thanks
    Thanks
    Thanks
    Ok
    Give this a try... open the page up in Chrome and wait for it to show up on your phone. Without clicking the send button, press the button in the upper right corner of the Edge Inspect client on your phone and choose the "Open in Browser" option. That will open a new window in the native browser on your device. When your page shows up there, click the "Send" button and tell us whether it works or not and describe what happens.
    Also, can you zip up the necessary code to repro this problem and send it to me at mrausch (at) adobe (dot) com ?
    Thanks,
    Mark

  • Form doesn't work in IE, need help...

    If you visit my site
    http://www.firetree.us and click
    on the quote navigation element (it's at the bottom on the left)
    and attempt to fill out the form you'll find it doesn't work. But
    only in IE. I can't figure out why I'm using PHP to send it.
    PHP is located /php/emailer.php
    HTML is located /content/quote.php
    Can anyone help? Thanks!

    Anyhow, the reason your form is not working is this -
    <p
    align="right"><button>Send!</button></p>
    You do not submit the form with this button. It should be -
    <p align="right"><button
    type="submit">Send!</button></p>
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Murray *ACE*" <[email protected]> wrote
    in message
    news:[email protected]...
    > Why are you doing your pages this way? They are
    completely
    > non-accessable, and not-so-functional when js is
    disabled.
    >
    > Also, your loading scheme defeats usability by not
    changing the URL - you
    > cannot bookmark pages....
    >
    > Finally, I feel like you have just put moving things on
    the page without
    > regard for functionality or visual appeal - it's a bit
    distracting to have
    > that continuous up/down motion right in front of my
    eyes....
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    > ==================
    >
    >
    > "Spencer Hill" <[email protected]>
    wrote in message
    > news:[email protected]...
    >> If you visit my site
    http://www.firetree.us and click
    on the quote
    >> navigation
    >> element (it's at the bottom on the left) and attempt
    to fill out the form
    >> you'll find it doesn't work. But only in IE. I can't
    figure out why I'm
    >> using
    >> PHP to send it.
    >>
    >> PHP is located /php/emailer.php
    >> HTML is located /content/quote.php
    >>
    >> Can anyone help? Thanks!
    >>
    >
    >

  • Urgent - Upgraded Form doesn't works well with values saved by previous ver

    Hi all,
    Form i m working on has changed many times due to change in requirments.
    Everytime i do addition in old form, it doesn't works well be data saved by older versions.
    e.g.
    Current Version that i have upgraded fetchs the data well from database on query. But when i save it, clear or exit the form and then re-query that data, it doesn't show up instead meassage comes that query caused no records to be fetched.
    i checked at database level, data is there.
    and when i tried to call data from old form, it also refused to show it (data that was previously entered by itself but then saved by new form).
    what could be the problem and i can i resolve it.
    plz note that in all of this process, there are no database level changes, only form level changes.
    regards,
    yasir

    sounds like spaces are being padded at the end of the data
    check the length of the values you've changed in sqlplus and see if they are indeed right padded

  • F5 Networks Host PlugIn doesn't work with Firefox 4??? Any ideas on a fix??

    I need F5 Networks Host PlugIn for a Work application to load. Any ideas when this will be available for Firefox 4 or any ideas on a fix?????

    I got it to work by installing the Add-on Compatibility Reporter add-on:
    [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=api Install here]

  • Webutil_file_transfer and host command doesn't work

    I use a host command in forms to execute a sql-script, which creates a file on AS. After the host command I use webutil_file_transfer to ftp the created file to the client. If I try to do this again in the same session, the host command fails. I have to restart the application to get it working again. If I leave out the webutil_file_transfer I have no problems whatsoever. It looks like webutil is changing something perhaps in the environment. Anyone has the same problem (and a suitable solution)?

    I can remove the files on AS (so there seems to be no lock). After removal of the files, no new files wil be created, even if I change the name of the file that needs to be created. Only restarting the application helps.
    Raoul

  • Oracle Forms doesn't work !

    Whenever I try to run an Oracle 9i form it just "hangs" on the screen saying "Oracle 9iAS Forms Services" -nothing else happens.
    Brilliant !
    Congratulations Oracle - you plumb new depths with every passing release. Your software is now not only almost impossible to install - it doesn't actually DO anything when it is installed.

    Hmmm,
    I can almost feel your deep frustration and the anger it causes.
    Weighting the number of succesful installations against the number of people reporting problems, I think that Forms is not doing bad at all.
    Anyway, every problem has a source that we better track down to make you happy again. So lets start with the obvious:
    1. Running Forms on a PC using DHCP may cause Forms to hang if the proxy server cannot resolve the servername. You can prevent this by disabling the proxy settings in your browser (e.g. configuring not to use a proxy for local addresses) or by using your IP address instead of teh server name
    2. Another reason for Forms not working is if the codebase isn't mapped. This however is done automatically for you when installing Forms. You can test it by typing
    http://server:port/forms/java/f90all.jar
    3. Did you install the Jinitiator version that comes with Forms 9i? If you are using Internet Explorer you will find that thisproduct is a but picky on which ActiveX comntrol to run and which not (Jinitiator runs as an ActiveX control in IE). Netscape is less selective and has much more tolerance in the range of versions it handles.
    4. Do you see the Jinitiator icon on the right bottom of the task bar? If so, double click on it to see if there are Java errors shown. If then please copy the complete stack and paste it to this thread. The Java stack is a good source of information.
    Thereason why it says "Oracle 9iAS Forms Services" is because this information is part fo the HTML file which gets downloaded to the client to start Forms.
    Frank

  • Store Complaint + Contact Us form doesn't work :(

    First, I tried to submit this via Contact Us and it did not work. It kept erroring and saying I can't exceed 2000 characters, even though the message was well under 2000. Very odd. Not a huge deal, but my message is below (note: I extended it a bit since I have more than 2000 chars here lol):
    I recently visited your Brooklyn store at 8524 5th Ave to return a product I had purchased at another Verizon store. My issue isn't with the return policy but with the experience at the store. I checked-in at the kiosk and waited for a period of time, then walked to the service area in the back and waited again. Eventually a nice gentleman offered to help me (not reading off of a list, but rather he was just free - so it doesn't seem the kiosk is being used).
    I showed him my product and receipt and explained the product performed poorly and wasn't a good fit for my needs. He informed me that the period of return had expired because the day I purchased the product during closing time at the other store was still counted as an entire day (it is not 14 days from the time you buy, so you can't return on the 14th day or something like that). I sort of object and said I was surprised, so he suggested I speak to the manager (Tyesha). He was really nice about it. He let her know and I waited (this was mid-day around 11:15am) for her.
    I waited for about 25 minutes, watching the manager dedicate her time to one individual for a sale while a line built up behind me. Then tending to a variety of other things where she seemed to be handling all kinds of matters that other staff could tend to. I watched several people storm out over this period of time, one leaving the service area saying 'this store is crazy and ridiculous.' After it was clear I was waiting for over 20 or 25 minutes, the manager kept saying 'just a few more minutes... few more minutes' then 'five more minutes, five more...' (She wasn't really nasty about it, just sort of exasperated.) I watched as she continued to took care of issues that seemed like any of the staff could have handled them (calling stores to check on another product, people coming in who had repairs, etc). Again the line kept building up as well. Eventually she got to me, and took calls as we were talking (mid-conversation, without 'one moment, sorry' or anything). Her general demeanor was 'I don't have time for you.'
    I'm a customer of nearly 10 years and I stay up on the latest Verizon products. I'm not expecting royal treatment but come on, I waited half an hour during my work day. I watched her tell others 'few more minutes' while taking calls on the phone. Then when she finally heard my issue, she gave me some attitude, said I can't return the product, and made unhelpful suggestions (while taking calls). I wasn't surprised that I couldn't return the product but wanted to at least ask if there was anything else I could do (I even offered to upgrade to a far more expensive product if it was better). None of this would have mattered much if it hadn't been such a ridiculous and chaotic experience at 11 in the morning (slow business period). Poor service. I just left.

    I know you are well past your 14 day return window. but is there a reason you did not return to the store where you purchased the phone?
    And is there something you need help with? Just wanted to vent?

  • "Submit Form" doesn't work in an Acrobat Form.

    We created an Acrobat form which includes a "Submit Form" button, but this button does not work in Unix. Is this a known issue? If not, is there a fix for this?

    Thanks for reporting the issue , can you please send us one such PDF form in which you are facing the issue. Also do let us know the version of Adobe Reader you are trying this on and also the Unix Distribution you are using.
    thanks,
    -vaibhav

  • Why my PDF form doesn't work?

    Hello! I am having issues with my Adobe Acrobat Pro 10.1.2
    I created a nice form for my client with a submit buttom to send his clients by email so they could share their answers on the same PDF straight to his inbox, but its not really working!!! After his clients fills in the form and clicks on the  submit button, an error message from Adobe Reader appears that says ¨Operation not authorize¨
    I created this form using a Macbook Pro 10.7.3
    I tried making the form a 1000 times and nothing seems to work!
    I also search on the google but I couldnt find answers.
    Can someone help me please?

    "I created this form using a Macbook Pro 10.7.3"
    And what program did you use to create this form? Perhaps that's where to look.

  • Submit button for online PDF form doesn't work for some users

    Two online forms I've created in LiveCycle Designer 8.2 work fine for me. But when some of my site's users click on the Submit button in either form, it simply flashes and then does nothing. It's a standard Submit button with a Mailto link. The documents are PDF Version 1.7, and I'm using Acrobat Pro 9.4.5 and Reader 9.4. Any suggestions on troubleshooting would be great.

    Has this form been enabled with Form Rights for Reader.  If the entire PDF is submitted, then the PDF must be Reader enabled to operate on Reader. 
    Another issue is that an email submit is entirely dependant on the user's system.  There must be a local email client installed and registered with the system.  Internet email will not work.  This is the most likely issue.  Althougth there are other things that could be wrong.  You might want to consider using the Acrobat.com to distribute your forms.  This method gets around the email issue for most users. 
    Other issues that could cause this problem are the users' version of Acrobat/Reader as well as any kind of funky system/security setup.   

  • Changed hosts file, doesn't work

    I've changed my hosts file but it doesntwork. I tried to restart my pc and uncheck-check the tcpip v4 and v6 protocol for the network adapter, but still does't work. Disabled and enabled antivirus, but nothing. Here below the test i do at the cmd prompt.
    C:\Windows\System32\drivers\etc>more hosts
    127.0.0.1 myself
    C:\Windows\System32\drivers\etc>ping myself
    Impossibile trovare l'host myself. Verificare che il nome sia corretto e riprovare.
    C:\Windows\System32\drivers\etc>

    Hi sandro.delmastio,
    What is your current situation?
    Have you tried the solution as Robert Aldwinckle mentioned?
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Propagate Data from User Profile to Resource Process Form doesn't work

    Hi,
    i've created a new custom task for Propagate Data from User Profile to Resource Process Form with a gtc connector but the task is never triggered!!!
    i need clues to resolve this .
    thnks.!!
    oim 11g 11.1.1.5 bp4. high availability with 2 nodes and a balancer.

    Hi Rajiv:
    ->Did you make that entry in Lookup as mentioned in that thread/post ?
    ANSW: yes.
    ->Did you use exact naming convention for your tasks ?
    ANSW: yes i put the same name that i put in the lookup into my process from.
    In which process definition have you created your task. Make sure it should be other than "Xellerate User" process definition.
    ANSW: PROCESS DEFINITION: * iPlanet User
    *TB_BAN1_AUR_GTC
    *TB_BAN5_AUR_GTC
    *TB_BAN3_AUR_GTC
    etc.. GTC conector.
    i have a test environment where this functionality works succesfully and i put the same in my production environmnet and the task never is triggered.

Maybe you are looking for