My Behringer FCA 202 is not showing as a device with OS X update

No.
Try updating the driver for Apple Mobile Device in the Universal Device controller section of the Device Manager.
(Apple Mobile Device will not show if your phone is not connected)
If you want to manually assign it:
Make sure your iPhone is connected to a USB port on the computer.
Launch Desktop and hover your cursor over the bottom-left corner of your screen to reveal the Start screen icon. Right-click on the Start screen icon then click on Device Manager.
Right-click the Apple Mobile Device in the Universal Serial Bus controllers and choose Update Driver Software.
Click Browse my computer for driver software
Click Let me pick from a list of device drivers on my computer
Click the Have Disk button.
Click the Browse button and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the usbaapl file. (if 64bit then it may be called usbaapl64)
Click Open in the Have Disk window, then Next and Finish.

Similar Messages

I just got my internet turned back on, and planned on updating my iPod to ios 5. However, when I plugged it in and opened iTunes, iTunes did not show it under devices, even after I updated iTunes to 10.6. It's like it isn't connected.

My iPod says it is carging, but iTunes doesn't say it is. It doesn't even have a devices category on the sidebar.

When I plug it in, it tells me, " iTunes has detected an iPod in Recovery Mode. You must restore this iPod before it can be used with iTunes." I don't have an option to back it up, only to restore it. I'm going to be annoyed if it erases everything, it never told me it would do this if I updated....

Booting my iMac takes much longer when Behringer FCA 202 is attached....

Hi,
just curious if anyone has a clue for this one: my iMac boots within half a minute, when my Behringer FCA 202 firewire audio interface is NOT connected.
When I connenct it, booting takes more than a minute.
When I boot in verbose mode, it says (amongst others):
kextd[31]: kextdwatchvolumes: couldn't set up diskarb sessions
kextd[31]: diskarb isn't ready yet: we'll try again soon
My theory is that the iMac thinks ithe FCA 202 is a firewire disk instead of an audio interface, and therefore tries to connect to this "drive".
By the way, the FCA 202 works fine
Is there a way to make the computer boot faster???
Thanks!
Regards,
Jaap

Then I suggest you contact the people who make the audio device and tell them. Your theory about thr firewire disk maybe true, however if it is taking a long time to boot up, I 'expect' from experience of hardware devices, that the OS does indeed detect the device and is simply waiting for a response that it never gets.
Usually in this case the OS (or the driver that is trying to query the device) simply 'times out' and then continues on - so it is as if an expected response is not forthcoming.
You should be able to see this quite easily for instance if when you boot up hold down ctrl-v (this turns off the normal mac boot up screen and shows you 'under the hood') if the device is hanging at boot then you should see the messages stop scrolling while the device is detected.
This information, if you are interested, will be held in your logs on your mac.
Simply 'hoping' the bug gets fixed (if that is indeed what it is) won't get it fixed if no one reports it.

I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?

I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?

Is it because the new itunes looks different.
View > Show Sidebar
Then it should work just the same as on your old computer.

Image not showing in Abobe integrated with Java WebDynPro

Hi All,
Image is not showing in Abobe integrated with Java WebDynPro.
I did the following:
Added the image field in adobe form. in URL value set the value of context node binding. Binding set to none and size set to Use Original Size.
Then in script editor i wrote
this.value.image.href = xfa.resolveNode(this.value.image.href).value;
at innitialize , javascript and client.
I can see the image from the same url context value if image field is created directly in WebDynPro View.
Can anyone suggest what is missing?
Thanks and Regards,
Nuzhat

Try changing your line of code for this one
this.value.image.href = xfa.record.Images.URL;
Check that the url passed by scripting is correct with a messageBox for example.
You can also try assigning a hardcoded url at scripting level to check if its works.
Best regards, Aldo.

How can I connect my new iPhone to my iTunes account on my computer? It is not showing in the devices when I connect it.

I bought a new Iphone and I was unable to update with my iTunes because they wouldn't let me leave the store with out checking the camera and speakers. I had to start the phone. I tried connecting to iTunes when I got home but it's not showing in the devices. Please help me.

Look at this for possible solutions: iPhone, iPad, or iPod touch: Device not recognized in iTunes for Mac OS X, http://support.apple.com/kb/TS1591

My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

Hope this helps:
http://www.apple.com/support/iphone/assistant/itunes/

My iphone 5 is not showing up in devices on my computer

My iphone 5 is not showing up in devices on my computer

Have you tried this article: iOS: Device not recognized in iTunes for Windows

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Apps showing in library but not showing up in devices i pod- sync apps list. ...pls help

apps showing in library but not showing up in devices i pod- sync apps list. ...pls help
id: [email protected]

Are the apps checked to be synced to the iPod and did you click on the sync button in Tunes?
Were the apps purchased fro the same accoubnt signed into in the iPod?
Are the apps compatible witht he iPOd model and iOS version?
Do you have restrictions set that prohibit instaling apps?

IPhone 5 not showing up in devices

Have got latest version of iTunes and iOS but iPhone 5 still not showing up in devices. Windows has recognised iphone and has transferred photos so USB working ok. Have restarted both laptop and iPhone. What else can I try?
Thanks.

http://www.apple.com/support/iphone/assistant/itunes/

Iphone not showing up in devices

my iphone is not showing up in devices after upgrading both phone and itunes. when using trouble shoot I get an error message, url not found, what does this mean

http://support.apple.com/kb/TS1538

ATV not showing up under devices in iTunes

I have synced this ATV with this Macbook in the past.
I am able to play music from my Macbook thru my ATV by selecting the ATV speakers instead of the Macbook's speakers.
I can play movie trailers on the ATV.
In iTunes>Preferences>ATV my ATV shows up and says it is syncing
I have updated my ATV and iTunes software.
However, it does not show as syncing on the home screen of iTunes and does not show up under devices on the left side. Any ideas?

porch wrote:
I have synced this ATV with this Macbook in the past.
I am able to play music from my Macbook thru my ATV by selecting the ATV speakers instead of the Macbook's speakers.
I can play movie trailers on the ATV.
In iTunes>Preferences>ATV my ATV shows up and says it is syncing
I have updated my ATV and iTunes software.
However, it does not show as syncing on the home screen of iTunes and does not show up under devices on the left side. Any ideas?
click here and try the suggested steps.
any joy ?

Apple tv not showing up in devices on itunes. Content gone from the apple tv and I'm not sure how to sync.

Apple tv not showing up in devices on itunes. Content gone from the apple tv and I'm not sure how to sync.

Welcome to the Apple Community.
Re-pair your library with iTunes.
Settings/computers, disconnect your library, then remove the Apple TV from iTunes prefs if necessary.
Then settings/computers/connect to iTunes.

My iPhone is not showing as a device in the itunes window. I authorized the computer but still not showinh

I am unable to see my iPhone in the itunes window. I authorized the computer but it still will not show. Under devices it is not listed. Any suggestions?

You do see the devices heading on the left sidebar? If you don't see the sidebar, go to View>Show sidebar in the iTunes menu and then check to see if the device appears.
If that isn't the problem, go through the troubleshooting steps. It could be the Apple Mobile Device Service issue.
iOS: Device not recognized in iTunes for Windows - Support - Apple

My Behringer FCA 202 is not showing as a device with OS X update - Please advise?!

Similar Messages

Maybe you are looking for