My bill is just too high! What is the cheapest way to switch if I'm still under contract?

I have four lines. It is costing me $260 a month for unlimited talk and text, and 6G shared data. It is killing me to keep this up, but I still need my lines. I'm researching other carriers to see if I can get my bill to $150 or less. There are options, but after October I will still have one line under contract. Can anyone guess what my early termination fee would be at that time?

When you log into the MyVerizon account for the account owner, go to change features. At the top will be an option to add a line fee discount if it is not under contract. Click on that. You would have to do it for each line which is not under contract. With a 6 GB shared data allowance, you would get a discount of $10/line not under contract.
Depending on how many lines you have out of contract, it MAY be beneficial to increase your data allowance to 10 GB/month. If you have a 10 GB/month data allowance, you would get a discount of $25/month/line. The increase in cost from 6 GB to 10 GB would only be $20/month(6 GB cost = $80/month, 10 GB cost = $100/month) but if you have 2 lines out of contract, the increase in discount would be $30/month(2 x $10/month discount = $20/month, 2 x $25/month discount = $50/month). When you get another line out of contract, your discount would increase each month by either $10 or $25 depending on you data allowance.

Similar Messages

I dropped my ipod in the pool and put it in rice for three days and now the screen stays white. what is the cheapest way to fix my ipod?

i dropped my ipod in the pool and put it in rice for three days and the screen just stays white now. what is the cheapest way to fix thiss?

There are companies that specialize in data retrieval but it's costly (probably cheaper to buy a new iPod) and more than likely as Allan said, your circuits are probably damaged beyond all hope of retrieving anything. It's worth calling Apple you maybe able to get a discount or a refurbished iPod. Can't hurt to ask, Good luck. (And in the future... no texting in the john.) Sorry, couldn't resist it.

What is the best way to switch off Daylight Saving Time?

What is the best way to switch off Daylight Saving Time for a DST enabled timezone?

I've been looking through the related classes and can't seem to find a way to disable DST in any timezone. Probably because they couldn't think of a good reason to want to know what the non-DST time was during DST.
However, you could easily compute the time without DST if that's what you need.

My iphone 5c went black screen and it still can cut on and off and it went black screen when i was on facetime with a friend and could still talk to them perfectly fine what is the cheapest way to get it fixed or can i fix it myself without any money

My iphone 5c went black screen and it still can cut on and off and it went black screen when i was on facetime with a friend and could still talk to them perfectly fine. What is the cheapest way to get it fixed or can i fix it myself without any money? I also didnt have the chance to back up my data because it went black screen out of now where.

If your phone is not covered by the warranty anymore, Apple will replace it for a new device, same model and size, if you are willing to pay the service fee.
If you decide to get a 3rd party company to do the repair, Apple will not service your phone anymore after that.
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Apple - Support - Service Answer Center

What's the easiest way to switch the license to a new computer for the same user?

What's the easiest way to switch the license to a new computer for the same user?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

What is the best way to switch from Trial to Purchased

I have the downloaded trial version of InDesign CS3 and will purchase it.
What is the best way to accomplish this once the credit card has been debited?
* Delete the trial version and download the purchased file from Adobe? (I would save off any pages created in the trial version of course).
* Just enter the serial number provided by Adobe into the trial version I have been using and dont bother downloading the link provided by Adobe?
* Delete the downloaded trial version and have Adobe send me the box version (taking longer obviously)? Once again, I would save the pages already created?
Thanks,
Bob

Just enter the serial number.
Note: if you only downloaded InDesign but bought the full suite, you'll
need to uninstall the trial and install the suite.
Bob

Recent graduate, beginning my career in theatre video - what's the cheapest way to get Photoshop and After Effects together?

Hi,
As I said, recent graduate. Not a lot of disposable income. I require Photoshop and After Effects to progress in my career. What's the best way to get these two programs with creative cloud?
Thanks!
Ellie

There is a special photographers plan, and then buy a single item subscription for After Effects
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html

What is the best way to switch to Thunderbird from Incredimail (old emails and address book)?

I'm feeling trapped in Incredimail. What is the best way to move over to Thunderbird? I'd like to keep my old emails, attachments and the address book as well. Is this possible?
I've seen the program "PCVARE IncrediMail Converter" at www.pcvare.com/incredimail-converter.html#dl.
Isn't there a better way (and free) to get out and away from the Incredimail trap?

Bonjour,
Open the address book window of TB. By the menu Tools / Import you can discover the possibilities and files formats accepted by TB for importing.
I don't know Incredimail, explore the menus of Incredimail to find how you can export data.
Pierre

What is the best way to switch between multiple image buffers? AND How to synchronize saves?

Hello,
I'm trying to flip-flop between two buffers and wondering the best possible solution for this. I'd like to acquire an image in one buffer, send that off to be processed, and then while that's being processed acquire a second image. Right now I have a "Create IMAQ vi" in a for loop and have it creating 10 image locations. I'm using a non-NI framegrabber (shame I know) which makes things a bit more difficult to replicate. I have two while loops. One while loop currently grabs images from the framegrabber and places in the 10 different locations. The other while loop currently holds a case structure that does the processing. I have created a local variable that holds all of the image locations and reads those to be processed. I don't know if this is actually making things faster or if it's better to just make one image location.
I have two images attached. One image is the Grab While loop. Since I have an array of locations, I have to use a for loop and index each one out to my display. I then have a shift register to carry the image location info over to the next iteration of the while loop.
The second attachment is the bulk of the main while loop. It shows what happens to the image while it's being fully processed in the left case structure. I know it does not look like much but one of the cases (which is called by Boolean Image FFT) is a subVI that does most of the processing. I believe that is what really slows it down because of how that program is written.
The right case structure shows my saving mechanism. I have two file paths. One to save the image and the other to save the processed image. I have a sequence to make sure they save at the same time once it gets to that point.
The problem though is the following:
In the grabwhileloop.png, you can see that I have a timing to see how fast the images are being acquired. This value is approximately 60 fps (which is the rate of the Basler camera). There is a similar set up in the main loop case structure. This processes very slowly and is approximately 1.04 fps. Which would mean that the image I turn into an array in the left case structure in the main while loop image is more than likely different than the image I'm trying to save off in the right case structure since the grab is occurring at the same time. I'd like to have the processed image to save alongside the image I am processing.
Sorry for the big bulk of text. This code has come a long way as it is. If you have any suggestions on making it faster or more efficient please feel free to chime in.
Thanks,
Rob
Attachments:
GrabWhileLoop.png ‏34 KB
MainWhileLoop.png ‏68 KB

Thanks for the comment. I have looked into the producer/consumer architecture, but to be honest, I'm not quite sure how everything will work while doing that. I have seen the example codes, and I have thought about implementing (or at least attempting to) but I'm still unconvinced that it will run that much more efficiently. There is other setup outside of the images that had to be done outside of either while loop. Also, I don't know where I would put both loops.
Last time, I attempted to put the grab while loop inside of the state machine. Things got chopped because it took so long to go through the main while loop's "acquisition" state (which is really the processing state). I needed both to simultaneously run. The grab reset every time it went to the "grab" state which is not what I wanted. The only way I can thing to have combatted this was to combine the grab and acquisition in the same state. If that were to happen, I'd take out the for loop and grab one image at a time. However, that would still probably make things even slower than they already are.
In terms of the doing something before an image is assigned in for loop, I don't need that pixel sum value to refresh too quickly. As it is already, the main while loop is slow enough as it is, so I am more afraid that everything will run too slowly the more I do. I know where the bottleneck is in my code, but I can't really see a way to "even out the flow". Even if I moved to the other architecture, I feel it'd take the same amount of time that it does already.
From my debugging, the Image local variable in the main while loop seems to refresh as quickly as the grab while loop spits it out. Granted once the main while loop finally completes, main images have gone by. This is what has to be though because it just take up so much processing power to run through the main while loop state.
As a side note, does labview have an issue with acquiring images in real-time that you have heard of? I ask because when I run the code, there is a solid white line that I'm supposed to see in my display. Every time things either time out or something, the line moves which is not supposed to happen. The line also moves every time I place my mouse cursor in the display or if I spin the mouse wheel to scroll. If I don't do either of those things, it'll eventually move on its own.

What is the cheapest way to buy a iphone 4s

i wanna buy a iphone 4s but everywhere i look there too expensive

jtherokkit7742 wrote:
i wanna buy a iphone 4s but everywhere i look there too expensive
Define 'too expensive'. Originally the iPhone 4S 16GB retailed for about $649 USD + tax, IIRC. And that was when it was released in October 2011.
So, three and a half years later, what prices are you seeing, and for what capacities?

What is the cheapest way to end service and change to Tmobile?

I currently have a family plan with 5 phones and 1 tablet and am paying way too much. I would like to switch to Tmobile. 4 of the phones have contracts up in a month but the other phone and tablet have another year. However we do not use those lines, they were added in order to get a premature phone upgrade (I now see the mistake I made there..). What ETFs am I looking at for those two lines? What would be the best way to change to Tmobile?

Actually you can port all the numbers over as Lizdance stated on the 4 lines. Do this when the lines are free from contract. Otherwise T-Mobile will pay $120 per line if you leave one month early. However you have to pay the etfs first.
The other two lines can also be ported out but again you will be paying the fees first.
Please be aware if you read up on the reimbursement of the T-Mobile program many complaints about not getting the money from them (actually gift cards) they are denying many submission's for a number of reasons, some they claim were not submitted on time, some have missing information etc. So be very careful.
Also you will need to purchase all new devices, pay activation fees and may have to pay deposits. The service may not be all that great coverage wise so be certain all works before you switch.
Good Luck

What is the best way to switch between two sets of bookmarks, say 'work' and 'private'?

I want to use to sets of bookmarks, so that when I'm working, I'm not distracted by my non-work bookmarks and vice versa. For the last couple of months, I've been using two user accounts to achieve this, but it's a bit of a PITA. Links from other applications, like Thunderbird mail are opened in the default profile. This means when I'm not at work and I click a link in an email, a new window is opened with my Firefox work profile.
All I need is a trick or an extension to quickly switch bookmark sets. Or a way to switch profiles without opening a new Firefox window. Any ideas?

You can't get Firefox to work as you are explaining you want. The Default Profile can't be changed on-the-fly to the Profile you are currently using. That message "Firefox is already running ..." comes up due to you or "something" trying to open a 2nd (or subsequent) Profile, unless that '''-no-remote''' command was used to open the additional Profile. And '''-no-remote''' won't work to open the Default Profile without causing issues with how Windows works with "calling up" the Default Browser.
In response to your last statement - '''''"To separate my work and private stuff I only need to change the contents of my bookmarks bar, so I hoped there was some trick to maintain to groups of bookmarks."'''''
This extension will allow you to change the Bookmarks Toolbar folder while you are using Firefox.
https://addons.mozilla.org/en-US/firefox/addon/set-as-bookmarks-toolbar-folde/
I just installed that extension and verified that it still works in Firefox 35.
There is a context menu item added for '''"Set as Bookmarks Toolbar Folder"'''' that appears when the Bookmarks Menu Bar drop-down menu is used (not in the Library window or the Bookmarks Sidebar). That menu item appears when you right-click a folder in the Bookmarks Menu folder. It doesn't appear with the "Bookmarks Toolbar" folder or the "Unsorted Bookmarks" folder - only a folder that is in the "Bookmarks Menu".
That should "solve" wanting to have two different settings for the Bookmarks Toolbar, but the Default Profile "thing" is still an issue for what you are trying to accomplish. I don't "see a fix" for that - without resorting to a 2nd Window User Account which is what I thought you were referring to by "I've been using two user accounts to achieve this" in your initial posting.
And since the Menu Bar is hidden by default these days, you can use '''Alt''' then '''B''' to open the Bookmarks drop-down from the "revealed" Menu Bar so you can access that '''"Set as Bookmarks Toolbar Folder"''' menu item - without having to show the Menu Bar all the time.
''BTW, using "accounts" in lieu of "Profiles" can be confusing when discussing Firefox Profiles.''

What is the cheapest way to be able to watch NETFLIX on my TV through my computer?

I am wanting to cancel some of my cable programs, so that my bill wasn't so high and I thought about streaming to my TV from my iMac, but wasn't sure on the most inexpensive way? Can anyone help?

if the iMac is in another room, the Apple TV is cheapest and easiest ($100).
Depending on the age of the iMac and if it's close, you can buy a Moshi HDMI adapter ($35) and an HDMI cable (varies by length) and basically turn the TV into another monitor. New HDMI can carry both video and audio. If it's older, you will need a 3.5mm split Y RCA cable to carry audio.
But honestly after buying those wires, you're close enough to the Apple TV price, you might as well buy that. it's easier and an advantage of that is now you can watch netflix and use your iMac simultaneously.

What is the cheapest way to upgrade memory for Macbook Pro

I want to upgrade my memory to 8GB in my MacBook Pro.
Apple are charging $400.
I've seen this for £50. Will it work fine? If not, where can I get the best 8GB memory for a good price?
http://www.google.co.uk/products/catalog?client=safari&rls=en&q=memory+in+macboo k+pro&oe=UTF-8&redir_esc=&um=1&ie=UTF-8&tbm=shop&cid=4523898050101099996&sa=X&ei =I3YhTqz8McHLhAfo55WkAw&ved=0CJ8BEPMCMAg#ps-sellers
Thanks
Steve

ryansmith42 wrote:
It was Kingston memory (KVR1333D3SO/4G; the newer batches are the same part number but are marked by "4GR" following the slash in the number). I did not buy a paired kit as it was not in stock; this may have contributed to the performance drop.
The metric in question was Xbench's Memory Test, specifically the System > Allocate number. Before the upgrade, I routinely benchmarked between 2.5 and 2.9 Malloc/sec (or a score of 750-800). After the Kingston memory upgrade, I never saw figures above 1.6 Malloc/sec (or a score of 420-450); roughly half of what I had seen prior to upgrading.
Since installing my OWC memory (which came in a package of two sticks), the performance is generally identical to the OEM (Hynix) across the board.
Hope that helps/clarifies my observations.
That helps a lot. Thanks very much for clarifying that. Yes, Kingston Value RAM is definitely not the way to go, as it has not been tested for compatibility, nor designed for use in Macs. See my other posts in this thread.
Kington's KTA line, OTOH, is tested for compatibility with Mac systems, comes in matched sets, and is very reliable.
AFA Kingston RAM, bottom line for Mac users:
KVR = bad
KTA = good

What is the best way to import a series of still images?

I'm trying to import a series of 300 PNG images into an existing FCP project. I've gotten the stills imported into FCP but when I place them into the timeline they are setup to be 10 seconds long and then if I change them all to 1 frame they are spread out throughout the project and lining them all up is a nightmare. Is there a better way to do this?

Went looking for this post by Ronny Courtens on Phillip Hodgetts' blog because I thought his succinct summary of image sequences in FCP might be useful to your issue.
Russ
Ronny Courtens · August 7, 2013 at 2:43 am
Frank,
Maybe some ideas for your main work:
1. Image sequences.
Although the best workflow for working with image sequences is to turn them into a video clip before importing them in an NLE, you can import image sequences and work with them in FCPX. It actually takes longer to explain this than to do it (-:
A. Import the image sequence in FCPX, group-select all the images of the sequence in the Event Browser and press ALT+G to turn the images into a Compound Clip. Set the format and frame rate for your CC. The image sequence will appear as a single compound clip in your Event Browser.
B. Change the speed of your image sequence.
Now here’s the rub: by default every image in the CC will have a duration of 10 seconds, which is wrong. That’s something that needs to be addressed in the way FCPX handles imported image sequences. But you can easily change the duration of the stills.
R-click your CC and select Open in Timeline. In the timeline press CMD+A, then CTRL+D. Now enter 1 and press Return. All your images will now have a duration of one frame, which is correct.
So, in short: Import image sequence, create CC, change duration. The whole process takes about 20 seconds. I do agree FCPX should be able to recognize images sequences properly, just like Motion does. Perhaps in the next major update.
- See more at: http://www.philiphodgetts.com/2013/08/final-cut-pro-x-is-faster/#sthash.1OlGyw6q .dpuf

My bill is just too high! What is the cheapest way to switch if I'm still under contract?

Similar Messages

Maybe you are looking for