My Bionic is not connecting to the mobile network

I have had my Biaonic for almost 2 years and the last 2 days it will not connect to the mobile network. Any ideas?

Could be a network outage in your area. You also could try resetting your SIM card, i.e., turn off the phone, remove the SIM card (be careful not to touch the gold contacts), wait a few minutes, then reinsert the SIM card, turn the phone back on, and allow the phone a few minutes to re-establish a network connection.

Similar Messages

HT1430 My IPAD 3 [5.1.1 (9B206)] has a problem. - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes) - It can no longer connect to the mobile network orange except Wireless (WIFI)

My IPAD 3 [5.1.1 (9B206)] has a problem.
- It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes)
- It can no longer connect to the mobile network orange except Wireless (WIFI)

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing. What can I do about this.

My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing. What can I do about this?

Hey Dr kris,
Thanks for the question, and welcome to Apple Support Communities.
I understand that you are having issues connecting to Wi-Fi networks with your iPad mini. The following troubleshooting assistant may lead to a resolution:
Apple - Support - iPhone - Join a network Assistant
http://www.apple.com/support/iphone/assistant/wifi/
For more in-depth troubleshooting, refer to the following article (refer to the "Unable to connect to a Wi-Fi network):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks,
Matt M.

Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

Fixing this is a two step process:
1) System preferences > WiFi/Airport ...
... check [√] Ask to join new networks
"Known networks will be joined automatically.
If no known networks are available, you will
be asked before joining a new network."
2) Remove unwanted networks from the list of "known" networks under
System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home. I have restared the phone and toggled the router, still no connection

After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.

When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.

My iphone will not connect to the airport network since I added a security password. The ipad connected immediately. Is there a setting on the phone that I need to change?

My iphone will not connect to the airport network since I added a security password. The ipad connected immediately. Is there a setting on the phone that I need to change?

Answered this question with a reply from "how does an iphone forget a network" response

My new ipad does not connect to the 3G network

my new ipad does not connect to the 3G network, only the network edge. what to do in this case (no 3G connection available in my location, even did tests with modems and cell phones)?

connection exists, because I connected with the iPad, but two weeks is not connecting more ...

I have a new comcast modem i have connected to Time Capsule with cable, TC in double NAT. As when I tried it in bridge mode I cannot use Sonos, the units will not connect to the wifi network? I thought Bridge mode would make the wifi signal better??

I have the TC connected to the comcast modem, with TC in Double NAT mode. I set up the sonos music players ok. But I read that to incresae the wifi signal the TC should be in Bridge mode. Then I cannot get any of the Sonos units to connect to the wifi network.
So two questions, does the Bridge mode give a better wifi signal then double NAT?
Why will sonos not connect to the network when in Bridge mode?

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

Macbook air will not connect to the wifi network

I recently had to replace my wireless network router and now my macbook air will not connect to the network. it worked fine with the old wireless router. Now, i get a "unable to join wi-fi network" message. The network ID (SSID) and password (WPA) are the same as before. I try to manually enter the password, but continue to get the previous message.
Any help in figuring out how to correct this problem is greatly appreciated.
Also, I have several PCs in the house that have had zero problems connecting to my wireless with the new router. What am I doing wrong?

Hi,
Ever since did the last airport utility update this has been happening.
I believe the airport utility update is solely a software update. Repair permission and repair disk (boot from your installation disk A) may help.
Other wise, http://osxdaily.com/2009/12/22/mac-wireless-problems-guide-to-troubleshooting-ai rport-wireless-problems-on-your-mac/ may help, too.
Cheers.

MyiPhone 4 will not connect to the Verizon network, but can connect to Wi-Fi.

After over 2 hours with Verizon, we could not get this phone to connect to the Verizon network-- and it is a Verizon phone.
It will, however connect to WiFi. We tried resetting everything possible, i.e. Network Settings, All Content & Settings, etc...
Also, tried connecting to iTunes and trying to get it to find the network and set up the phone through there. Nothing.
It still reads: "Searching..." and cannot find the Verizon network.
I bought this pone used because my Droid is near death and I am not able to upgrade until April 2014 (ugh!)
The person I bought it from says he had no issues from it whatsoever before shipping to me
Is there an internal antenna that may need to be replaced? If so, how much would that cost?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Hp photosmart not connecting to the wireless network

Hi,
I see that there are many questions on this theme that I have read.
i am still confused and have tried many of the solutions as I am unable to connect my printer to a wireless network and therefore not connect it with my mac running the latest os.
I am not the most tech savvy but can folllow instructions easily.
I have printed the network configuration page and it shows the network of the printer is offline. how do i get it to connect?
I have tried the push button method.
the printer is connected to a windows 7 computer that isnt wireless could this be the problem.
please help me i have been at this for 3 hours so far.
thank u

Hello @Ali1234,
Welcome to the HP Support Forums! I understand you are trying to connect your HP Photosmart C4780 to your Mac running the Yosemite 10.10 Operating system. I notice you have the PS C4780 connected to a Windows 7 computer, what you would need to do is connect using the USB to Wireless option. Let's put the Mac on hold for a minute and get on the Windows computer, follow the steps below:
The HP software automatically gathers network settings by temporarily connecting a USB cable from the printer to a computer that is connected to the new network. Follow these steps to reconnect the printer to the network.
Click the Windows icon (), click All Programs, click HP, and then click the folder for your HP printer.
Click USB to Wireless, and then follow the on-screen instructions. Do not connect the printer to the computer with the USB cable until prompted. At the end of the process you are prompted to remove the USB cable.
Restart any other computers on the network that use the wireless printer.
- Source
Once you have the PS C4780 connected to your wireless network, let's go ahead and work with the Mac. Because you are using the Yosemite 10.10 Operating system you must install the printer using the Apple Updates. Please click on the link below, this document explains how to install the print driver on a Mac for a USB or a network connection. The OS X v10.10 Yosemite driver for your printer is available through Apple Software Update (ASU). Additionally, you can perform basic print jobs using AirPrint without installing a driver.
Installing a Mac Printer Driver Using Apple Software Update
Be sure to check out the FAQs at the bottom of the document as some of the features may be limited or there are workarounds.
I hope this helps!
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Why will my PC not connect to the Wireless network?

I recently upgraded to the airport extreme and my PC which has a wireless card will detect the network but when i click "connect" i get an error stating "windows is unable to connect to the selected network. the network may no longer be in range. please refresh the list of available networks, and try to connect again." I have not changed any settings and it worked with my old Linksys wireless and on my Apple laptop it worked as soon as i put the password in. Someone has a secure network that will prompt me for the password so i know it is not my PC or the airport, seems they will not talk to each other.
please if u have had this problem give me step by step help, i have read many topics and have not been able to get it to work at all.
thanks

Try resetting you network settings on your iPad. Go to Settings, General, Reset, Reset Network settings and see if that clears it.

My HTC One m8 is not connecting to the mobile data network.

WiFi works, I can make phone calls, but I can't access internet at all while not connected to WiFi. yes, mobile data is on (but disconnected). I've tried LTE, CDMA, Global, and no available network mode works at all. Please help =(

Hi patient.zer0!
Sorry for any trouble with your data. Let's look into this OK? Please turn on your mobile data and try again to access the internet. When accessing the internet, either Wifi or VZW data has to be turned on.
Let me know how this goes, thanks!
ChristinaB_VZW
Follow us on Twitter @VZWSupport

Podcast keeps connecting to the mobile network even when I have set up Podcast to download only from Wifi

I hope someone can help me.
I am really tired, fed up, with this Podcast application's behaviour. I have set up, both from the Podcats Settings and Mobile Network Settings that Podcast should NEVER use Mobile Networks for any download, it should only use WiFi.
After doing that as soon as I open Podcast, if I check Mobile Networks configuration, or Podcast config, I see that again, by itself!!!, Mobile Networks for Podcast is ACTIVATED (even when the iPhone is connected to WiFi)
Apple people, this is costing me money!!! And this strange (silent and from the back) behaviour, against the user settings, looks more and more like fraud (as when I apply the settings I define clearly my intentions of not downloading from the network, but your Apple's Podcast Application keep changing it against my will)
I wish someone can help me to stop this application to revel against the user's will.

It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

Blackberry wont connect to the mobile network?

my phone was working fine until it suddely wouldn't pick up a signal? i've tryed changing sim cards and i've checked with everyone on the same network if there's is working fine and it is what can i do? i've also updated my phone and restarted it multipel times.

So on the Manage Connections screen, when you click to connect to your network, what actually happens?
On thee Manage Connections > Mobile Network screen, what is your Network Selection Mode set to? Network Technology?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My Bionic is not connecting to the mobile network

Similar Messages

Maybe you are looking for