My BIOS is outdated, but my OS does not support the downloads provided.(XP,VISTA etc..)
Hello all, I have been trying to update my BIOS because I beleive that it is affecting my gaming experience (I cannot start certain games up) and from researching through the web I beleive this is the problem. I havce tried to find a new BIOS update on the download page but my OS is not supported for the downloads provided. I think it may be because my computer is an old model ( HP Workstation xw6200). I hope anyone could help by letting me know if i can get a download for a new BIOS version. I am currently using Windows 7, thanks.
Hello calmax,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are looking to upgrade the BIO on your HP Workstation xw6200. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Workstations - z series, xw series, and legacy x and w series.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter
Similar Messages
-
Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed AhmadYes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed -
When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar." I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
Thank youSee this link.
Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to). -
HT4906 I updated to IPhoto 11 but iCloud still does not recognize the update
I updated to Iphoto 11 but iCloud still does not recognize the update? Why?
What version of iPhoto do you have? 9.2.2 or newer is needed
What verison of IOS on your mobile devices?
LN -
I have Nikon D7100 and shoot in raw. I have tried to open a raw file in elements 10 but it states it does not support the format. I also have a D800 and these open file in elements camera raw. Can anyone help please?
Hi,
You need version 7.4 or higher to read raw files from, a D7100. Unfortunately, ACR 7.4 is not compatible with PSE 10.
You need to either
- update to a new version of PSE or
- download the DNG converter - use it to conver your NEF files to DNG files which can then be read by PSE 10.
DNG Converter 8.4
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5739
MAC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
DNG Converter 8.3 (if running on XP or Vista)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
Good luck
Brian -
my i pad shows connect to itunes but my computer does not recognise the devise -- it was ok until i tried to do a software update
Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Hi, I have Lightroom 4, but it does not support the new 10-30 pd lens for my Nikon 1. It is supported in LR5. Can I download this lens profile and install in LR4?
Do you have the latest camera raw installed for Photoshop? If so, you can find the profiles in /Library/Application\ Support/Adobe/CameraRaw/LensProfiles/1.0/Nikon/ . Lightroom should recognize them if you move them into your home directory's Library folder in the exact same folder structure (but in the Library folder in your home directory). This is assuming you are using Mac OS X. No clue where these files would be on Windows. If you don't have Photoshop, you can install Camera Raw using the combined installer with DNG converter which is a free download from Adobe. This should (I think) give you the profiles in that exact location without owning Photoshop.
-
when I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar. How do i get rid of this?
Carolyn Samit has answered this question before. I did it with this info. Thank you Carolyn for your awesome help.
-
Hi I am unsuccessful in pairing my iPad 3 with my friend'sGT 19070 phone. Her phone says we are paired but my iPad does not see the pair; it says it is unsupported. Any suggestions?
The iPad message is correct, it is unsupported. You cannot pair your iPad with your friends phone. Bluetooth on the iPad is designed for the use of headphones, keyboards, speakers and some peer to peer gaming.
-
i would like to run the most secure version of firefox on my computer, but my computer does not meet the system requirements for the latest version. is there a way i can have the security of firefox 8 and still be able to run it on my old computer. i currently an running firefox 3.6. it is a bit slow, but it is functional.
Currently Firefox 3.6.24 is as secure as Firefox 8.0.1 is. Firefox 3.6.x will continue to get security updates until next spring, although the exact date hasn't yet been determined.
Which of the system requirements are you lacking? <br />
Processor wise you're stuck with what you got, but RAM can be upgraded. WinXP is still supported in all versions of Firefox and will be continued to be supported until Windows drops support for WinXP sometime in 2014. -
using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it
That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery. -
Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
ShyamHi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam -
Apple TV 3 does not support the Microsoft Wedge Mobile Bluetooth Keyboard
Apple TV (3. Generation) still (17.02.2013) does not support the Microsoft Wedge Mobiloe Keyboard. I bought it especially for use with Apple TV but it doesn't work. Apple TV finds the keyboard with the exact name but can not connect. No 4 digit code appears that you can type in to your keyboard to compelete the connecting process and after a few seconds "connections fails" appears.
Now i dont't know if i should send it back to amazon to get back my money or keep it and wait until it maybe will work some day... I red from articles from beginning of january 2013 that a new Version of Apple TV is in the Pipeline (3.2) and that it has an other bluetooth chip. The same as in the iphone 5 that works with the MS wedge keyboard. So i really don't know if i should wait for the next few updates of my Apple TV or wait for a new Apple TV hardware- Update... Telephone calls with apple and microsoft doesn't brought useful results. Restore function of Apple TV doesn't work.
I hate that Apple always brew their own soup... Bluetooth is know for an easy connection to ALL devices but Apple TV supports only a hand full of keyboards. **** S**t!!!!!!!!!!!! -.-Hi
This is the solution from Microsoft website. Work fine (don´t forget press and hold Fn key!!):
Connecting the Wedge Mobile Keyboard to a tablet PC
By default, the Bluetooth Wedge Mobile Keyboard pairs with most tablet PCs through secure simple pairing (SSP) with a passkey. Some tablets, however, may not support SSP well with a passkey.
In order to successfully pair your Wedge Mobile Keyboard to such a tablet, use the following alternative pairing mode.
Pair your keyboard through SSP without a passkey
Press and hold the Fn key at the same time as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on the top of the keyboard will blink green and red alternately. This means that your keyboard is discoverable to your tablet within 6 minutes.
On your tablet PC, from the Start menu, select Control Panel, and in Category view, locate Hardware and Sound.
Select Add a device.
When the keyboard is listed, select it, and follow the instructions to successfully pair your Wedge Keyboard with your tablet.
Note
If you want to pair your keyboard with a tablet or other computer that supports SSP with a passkey, press and hold the Connect button only. -
As of Monday 4/20, I've encountered a significant problem with Silverlight on my Vista PC.
Several weeks ago I read a brief item stating that Google would be dropping support for npapi and that it would affect Silverlight sometime in April. One of my key daily apps uses Silverlight, but I didn't receive notification from that software's author
about the pending change and how it would be handled. Successfully used the app every week (Mon-Fri) this month for 8-10 hrs/dy day (as I've been doing for the past ~5+ years: past year under Chrome, year before that under FireFox, ~3 prior years
under IE) and on Fri 4/17 shut it down for the weekend. When I booted up on Mon morning and tried to log into the key app however, it prompted me to download and install Silverlight, acting as though I never had it installed!
I recalled the earlier warning about Google dropping support, so I closed Chrome, started up FireFox, but got the same prompt from the app -- it directed me to install Silverlight. I downloaded it (had no choice as to which version, just got the "Silverlight_x64.exe"
file) and got part-way through the install when this error msg popped up: "Unable to Install Silverlight. Your operating system does not support the 64-bit version of Silverlight". WHAT?! Clicking on the "more info"
link led to this msg: "Message ID: 1518. Your operating system does not support the 64-bit version of Silverlight. Click here for the latest version of Silverlight." That link simply led back to the download page which resulted
in receiving another copy of the same executable file.
According to my system ( > Control Panel > System ), I'm running "Windows Vista Home Premium", with a "System Type: 64-bit Operating System". I've been using this same Vista PC since Sep 2008 and running Silverlight for
around the past 5 yrs.
? -- Why doe the Silverlight installer code flag my OS as not supported?
? -- Is there a way to get an older version of Silverlight that will run under Vista?
Thanks in advance for any helpful comments.Andy -- Thanks for the link, but I'm not adventurous enough to download from a non-MSFT site.
Besides, since I didn't make any changes to my hardware/software config, I expect a MSFT rep to explain why their two programs suddenly stopped working together and then provide whatever code fix is needed. A phone call to their tech support (predictably)
led to nowhere but a recommendation to purchase one of the company's support offerings (which I declined to pursue). The Silverlight development team appears to participate in these forums, so I'd hope one or more of them offers a realistic solution.
Here's something I forgot to mention in my original post: In several of the threads on this subject (some dating back to 2008!), people have
suggested running IE as the browser vs FireFox or Chrome; however, that idea fails to note that the error msg (Message ID:1518) clearly states that "your operating
system does not support the 64-bit version of Silverlight"; it doesn't say anything about
what browser you're using. -
I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab AllemanHi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support
Maybe you are looking for
-
IPhoto crashes every time I edit an image. Help!
I am running iLife '09 and have 9,928 images in my library. Any time I try to edit any of my photos in the edit window, iPhoto freezes then crashes. I have re-built the library in iPhoto. I then downloaded iPhoto Library Manager and re-built a new li
-
Hi all I need to fetch the mail date during the processing with mail sender adapter. I can't find a relevant field in the Adapter-Specific Message Attributes (SHeaderFROM, SHeaderTO etc.). Do you know how to fetch the mail date during the processing
-
HT201272 How can I up grade my iPad 2 from iOS 4 to iOS 5
How can I up grade my iPad 2 from iOS 4 to iOS 5
-
Is my powerbook electrocuting me?
I dropped my powerbook, unprotected, a couple of feet yesterday and it landed right on the corner that is closest to the battery (with the laptop open, this is the front left corner on the base [non-screen] portion of the computer). There is a bit of
-
Trouble exporting to Windows Media
Hi -- I'm hoping someone can help me with this problem. I have two .mov files that I need to export to .wmv. The exports complete successfully, but the resulting .wmv files are cut off. One cuts off at 29 seconds even though the .mov clip is 49 secon