My birthdays appear one day out in the Calendar!

I've upgraded to an iPhone 4s but my birthdays appear one day out in the Calendar!

The problem seems to be that the iCloud Time Zone overrides your iphone Time Zone.
If you are sure that your phone time zone is correct.
Start iCloud on your computer. Log in with your AppleID and Password.
Click on your name (top righthand side) in the window I suspect it will show Pacific Time in the Time Zone.
If like me you live in New Zealand click on Pacific and in the world map click on New Zealand.
Now New Zealand Standard Time should show in the Time Zone. Click done.
You will now have to change the birthdays again to the right day in Contacts in iCloud or your Phone for the last time.
Good luck

Similar Messages

Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!

Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

Calendar appointments and birthdays in contacts appear one day early? iOS 5.0.1 on iPhone 4S

Hello, About a week or two ago, I noticed all my appointments were on my calendar a day early, as well as birthdays in my contacts. I sync my phone with my Macbook using Address Book and Calendar; had done this previous with my iPhone 3GS running iOS 5.0.1 without issue. I unsynced my calender, and then re-synced it, and this corrected the calendar appointments. However, birthdays still show up a day early on the calendar. When I look in Contacts, the birthdays are correct. Has anyone seen this before? Thanks! --Matthew

this worked for me: (thanks to @fortbailey!)
(1) If your iPad/phone is syncing contacts with iCloud, turn it off. In Settings on your iPad/phone, Mail,Contacts,Calendars, Accounts, iCloud, turn off Contacts.
(2) sync your iPad/phone to iTunes.
(3) now select the ‘Info’ tab in iTunes for your iPad/iPhone. Ensure that ‘Sync Address Book Contacts’ is ticked. (You can revert to syncing with iCloud later, after this process is complete.)
(4) scroll to the very bottom section of the Info tab. Where it says ‘Replace information on this iPad/iPhone’, select ‘Contacts’.
(5) Sync again.
Now check Calendars on iPad/iPhone, this process ‘fixes’ the information of birth dates and they should now appear correctly.

I got a IMAC 10 days ago, if the new one comes out what the chances for exchange?

I got a IMAC 10 days ago, if the new one comes out what the chances for exchange?

I'm not sure about a restocking fee, but heard of people returning items for a new or differant one. they said they held your original payment as a credir toward your new order.. I'd just call them and ask. good luck.

Why are my contacts birthdays all two days out on my iPhone?

Why are my contacts birthdays all two days out on my iPhone? They show as correct on my MacBook Pro and my iPad but not my phone. When i try and change them they revert back to being two days out.

Welcome to the Apple Community Rob.
Please try the following…
    1.    First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    2.    Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
    3.    If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Calc Script runs slow one day and fast the next?

We are on Essbase 11.1.2.1. When we run calc scripts to load our actuals and run some allocation scripts, the difference in running time for the same exact script is very different day to day. One day three hours the next 45 minutes. Our servers are just for Essbase. We are on Windows 2008 R2. Has anyone else run into this or have any idea how we could figure out the reason for this. Thanks.

Thanks. In that case, I would try to grab the cube statistics - especially number of upper-level and input blocks, compression ratio and fragmentation (in EAS you can only see one of the two fragmentation statistics, 'Average Clustering Ratio', not 'Average Fragmentation Quotient') before each run, just to see if they're varying wildly. Also, if your calc scripts log summary information (is there a SET MSG command in them? If not you could try SET MSG SUMMARY) then Essbase will write high-level statistics on how much work was done to the application log.
You can see which cubes are loaded (and consuming memory) in the EAS treeview - if they have a check (tick) mark they are loaded. But you can also see current activity by right-clicking on the server in the EAS treeview and selecting Edit | Sessions. That will show whether there are other operations (loads, calcs, reports, restructures etc) occurring at the same time.
If none of the above give any clues and this is a virtual box (or you have SAN storage) you really will need someone who understands your infrastructure to help.
I'm assuming these are BSO cubes, by the way!

How do I deathourize one computer out of the 4

How do I deathourize one computer out of the 4

Son Mac Maillan Walker,
Niel is correct, so if remote access is a possibility, you can use that.
However, the reason people usually ask your question is that the computer in question is inoperable or has been discarded. If that is where you are, then you cannot deauthorize.
When you reach 5 authorized computers, you can use the "Deauthorize All" command, and then just reauthorize the ones you want.

Displaying wrong date(One day earlier then the current)

Has anyone experienced this problem. I have an inputText field that is to take in a date value. When I use the DateTimeConverter to check if the date is valid, the returned date valu is always one day earlier than the user input day.
How do I resolve this. Is there a setting that I need to change?
Thanks in advance.
-Meena

Which JSF Implementation is this code extract from?
I am using IBM WebSphere 6.0 and also experiencing a problem with an InputText displaying the day before. For example when the InputText value is set to 21-Apr-2007, 20-Apr-2007 is displayed. Here is a simplified version of what I'm doing:
Page - inputTextDates.jsp
     <h:inputText id="opDate" styleClass="inputText"
          binding="#{inputTextDatesBean.htmlInputText}">
     </h:inputText>
Request-Scope Bean - InputTextDates.java
     private HtmlInputText htmlInputText;
     public HtmlInputText getHtmlInputText() {
          if (this.htmlInputText == null) {
               this.htmlInputText = new HtmlInputText();
               // create a calendar for manipulating dates for the chosen timezone
               GregorianCalendar gregorianCalendar = new GregorianCalendar(TimeZone.getTimeZone("US/Central"));
               gregorianCalendar.setTime(new Date(107, 3, 21));
               // create a date time converter for the timezone
               DateTimeConverter dateTimeConverter = new DateTimeConverter();
               dateTimeConverter.setTimeZone(gregorianCalendar.getTimeZone());
               // create a calendar picker
               HtmlInputHelperDatePicker htmlInputHelperDatePicker = new HtmlInputHelperDatePicker();
               htmlInputHelperDatePicker.setId("myId"); // have to give an ID
               // populate the input text
               this.htmlInputText.setValue(gregorianCalendar.getTime());
               this.htmlInputText.setConverter(dateTimeConverter);
               this.htmlInputText.getChildren().add(htmlInputHelperDatePicker);
          return this.htmlInputText;
     public void setHtmlInputText(HtmlInputText htmlInputText) {
          this.htmlInputText = htmlInputText;
     }

Query output to have Day out of the Date

Hi,
I have developed a BEx Query with 0CALDAY in Rows and few key figures in the columns.
My BEx Query output needs to be just Day out of the Date. So if Calender Day is 26.03.2009 then in the query result I need to display '26' only.
Can you please let me know how this could be possible?
Thanks,
Amogh.

Amogh,
Strange requirement!!!!!
It is feasible via Modelling i.e
1. create new Z infobject say Zday.
2. Add it ur data target. Delete the data and reload the data.
3. Map Ocalday to this object in Transforamtion and put below code
Result = SOURCE_FIELDS-CALDAY+6(2).
4. Include Zday in Bex query.

Does any one know if the iPhone camera one day will have the ability to date stamp photos taken with the iPhone

Does any one know if the iPhone camera one day will have the ability to date stamp photos taken with the iPhone

No one but Apple knows what will come in the future until they announce it. We are forbidden from speculating about it on these forums.

A one day entry on iPhone calendar shows as two days on iPad?!

I know you're thinking this is probably something to do with timezones differences between the iPhone and the iPad?
Each year I put the F1 grand prix races in my calendar as a one-day event on the Sunday they take place. On Sunday 27th March 2011 is the Australian grand prix.
On my iPhone (I'm in the UK and running the latest version on an iPhone 4 etc.) it shows as a one-day event but on my iPad it stradles two-days! When I go to click EDIT on the iPhone entry, despite showing as a Sunday entry only, it shows that it starts on Sunday 27th March and finished on Monday 28th March!
I spent a couple of hours looking at this. No other grand prix date has this discrepancy between the iPad and the iPhone calendars (that are sync'd with MobileMe calendar). It's just this one date.
I even had a friend add an event on the same date and it also suggested it was a one day event but when you edit it then it shows it's a two day event.
And then the only explanation dawned on me. It wasn't time zone setting differences as that would affect all the entries like that the whole year.
27th March is the date the clocks go forward in the UK for British Summer Time!
Is it a bug though? Why does the iPhone show it as one day but the iPad show it as two?
What is it with Apple and calendars and alarms?! And don't start me on the MobileMe calendar and Outlook integration. It's rubbish.

Hi Boneart - I feel for you.
I too have the same issue (Feb 2014) which I have just discovered today as I am not a strong user of all-day events, until today when I tried to schedule annual holidays in my diary. I can confirm the EXACT SAME issues that you have described with all-day events displacing 24 hrs EARLY for sync Outlook to iOS calendar, and all-day events displaced 24hrs LATE for sync iOS calendar to Outlook. I also confirm that the issue does not exist for specified time appointments, as you also found.
I note from several other discussion threads that Apple have previously focussed on an issue of all-day events syncing to span 2-days; that is not yet apparent in my situation BUT I will be watching with interest whether a subsequent synchronisation causes the displaced dates to also synchronise back providing the same event apparently spanning 2 days but ACTUALLY existing as two events with identical properties on successive days.
One oddity is that I also operate in the NZ time zone; I wonder if that is significant???
For a brief period I trialled iCloud with a thrid-party patch to resolve the native iCloud issue of not providing 2-way synch with Outlook. That worked beautifully ... until Apple provided an update to the iCloud interface which destroyed all functionality for me. I'm back to hard-wire sync via USB wire again. Very frustrating!!
Finally it is sad that Apple has no interest in these issues. It strikes me that as soon as there is a non-Apple platform involved they blame the other system and wash their hands of it.
iPhone 4; iOS 7.0.6 (latest); Outlook 2007 & iTunes 11.1.5.5 on Win7Pro 64x v6.1

"All-day" events in iCal appear one day early in week-view on iPad

Just got an iPad and synced with iCal. I noticed that "all day" events appear correctly in day-view and month-view, but in week-view, they are shifted one day earlier. But if I choose to edit such an event, the information is still correct, e.g. an all-day event for Monday, May 31 and Tuesday, June 1, has that information, and it appears on Monday and Tuesday in day- and month-view, but in week-view, it has "slid left" such that it appears on Sunday and Monday. Anyone else seeing this? Any solutions?

I have the same issue on all day events synced from Exchange. The items look fine in the day or month view.

My itunes won't print. Printer show nothing in que. One day it and the next no

My itune won't print. One day worked, the next no. printer works fine but when trying to print itunes it does'nt even show in the printer que.

Before you tear out your hair, follow the steps that Casper recommends. It works in minutes. The reformatting will mean you will have to reload your music, but that's better than tearing out your hair for sure. I feel lucky to have stumbled across the following instructions before too many hours went by. GOOD LUCK!!!!!!!!!
Windows users: If you are not able to restore the iPod, you can try to format it:
Open Control Panel
Click the "switch to classic view" link, if necessary
Double click "administrative tools"
Double click "computer management"
Under "storage" click on "disk management"
Find your iPod's listing
Right-click on it and click "format"
Select "FAT32" and start the format
After this, your I-TUNES should start up and ask you to register the NANO again, but at LEAST IT RECOGNIZES IT again. WOOOO HOOOO!!!!!!!!!
NANO Windows XP
NANO Windows XP

1gb 3G Charges in one day, on WiFi the whole time

Hello,
This is my first time posting, thank you in advance to anyone who can help me!
I'll start with my phone: iPhone 4s, running ios 5.0
I woke up to a text message this morning saying that I had already used 50% of my data plan usage, meanwhile the start of my billing cycle was only four days ago! I have never ever even gone past .3 gb in one cycle, so imagine my shock!
I called Verizon, and they said that my phone was active on 3g yesterday for 9 hours, despite the fact that I was at work and on WiFi the entire time. I only checked my email once or twice, did a few text messages, and as usual I closed all my apps when I was done (I hate leaving apps running in the background). I did nothing out of the ordinary, and definitely wasn't doing anything that would have used 3g for 9 hours straight. I had the WiFi icon displayed the entire day as the router signal reaches my desk. Never did it say 3g as the icon in the corner.
The only other out of the ordinary thing that happened was this morning I received a prompt to update to ios 6.1.3 (which I didn't do).
The representative put me on hold and talked to the techs. She came back and said that the techs told her I need to update my operating system and it would fix the problem. She said "There was a known issue that even though the icon is a WiFi symbol, the phone could actually be connected to 3g instead and the update would fix that." I just don't really believe that. I am still running ios 5.0 and it works great for me. I've had the phone for over a year and have never updated. So how can I have this issue all of a sudden where my WiFi icon is lying to me? And what could have it been doing for 9 hours straight?
Luckily she is going to give me a credit for any overage charges I may encounter, but I really don't want to update my ios as it works very well for me.
I'm looking to see if there is any truth to Verizon's solution, should I update? I've heard horror stories about 6.1.3 so I'm very hesitant, but I also don't want to run into this problem again and get charged for 3g data I didn't really use since I thought I was on WiFi. Is it really my operating system?
Thanks again in advance, I really appreciate it!

Thanks for the reply! I understand what you mean about the standby not being connected, but I guess what I meant is whenever I was actively using the phone I was on WiFi. I didn't use the phone in any way that was out of the ordinary, like I wasn't sitting at my desk streaming anything or surfing the internet. I always close out of my apps so they are not running in the background. Most of my push notifications are turned off. I just don't understand 1-how I managed to go through 1gb in one day when I didn't use the phone any more than I usually do, nor did I use it while unconnected to WiFi and 2-would updating the ios to 6.1.3 really fix the problem like the Verizon people said it would even though I haven't ever had a problem with 5.0 before.
Thanks again for the reply!

BROADBAND here one day, gone for the next 5!! what...

weve been having problem with our broadband for months now. it goes through phases of not working.
randomly prat way though using our wireless internet our router broadband button will flash orange, and will stay like that for days, then randomly like today it will start working again.
at the moment on average its on for 1 day out of seven.
iv tried putting the cable in the tester port on the wall socket and its the same from that.
last time i phoned bt i was told it was a fault our end, and we needed to get an electrician out to fit a new connection box, but surely if im still not getting signal via the test socket its not my end?
feedback or similar experiences greatly appreciated!!!

i yes sorry we do have a land line, we just dont have actual phone!
iv tried with the cable too yes.
i phoned bt yesterday. firstly i was told my account was in fact closed hence no internet. this was wrong.
the next person i spoke to was very helpfull. after several tests he said he would get an engineer on teh case, would take approx 4 hours and someone would call me back between 2-4pm yesterday. no one ever phoned.
today having taken 50mins to get through to teh right department (even though i phoned the same number every time) it seemed no one wanted to speak to me.
i got told theer was an area problem and thats why it was working. she would not take it from me that the problem had been going on for months. she wouldnt help me, she would not listen to me, i feel so stressed i feel like crying! im paying for a service that i am not getting and no one from bt wants to help me!
AAARRRRRRRRRRRRRRRRRRRHHHHHHHHHHHHHH
sitting in mac donalds just to get a connection! and oh my its in the same area as me and its internet is working fine!

My birthdays appear one day out in the Calendar!

Similar Messages

Maybe you are looking for