My blackberry 9800 has 0 mep attempt left

good day,please i have a blackberry 9800 and its at&t, i traveled
abroad to visit one of my cousin,so i wanted to use a new sim in
it,and its asking me for a mep code,i dont know what it is so i
dropped it,my cousin has entered a wrong code now its saying 0 attempt
left.what can i do to it please.please let me know what i can
do.because i really need to make some calls.

See this thread:
http://supportforums.blackberry.com/t5/BlackBerry-Bold/Blackberry-Torch-9800-0mep-attempts-Locked-fo...
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Similar Messages

MEP 0 left

Hi,
My blackberry has 0 MEP attempt left. I will move to Asia next week. Please help!!!
PS. my cell phone now out of warrantee and the carrier is AT&T
Thank you in Advance

Hello Notte
Welcome to the Community
Sorry but you should not have entered 10 wrong MEP codes,Now only RIM can Unlock the Device,but for unlocking that device from RIM will cost much, it is better to get a new device.In addition have a look at this thread ,some good reading about this MEP CODE .
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Blackberry 9800 blank screen

My newly purchased Blackberry 9800 has just gone blank. I'm so sure it's not a battery problem because I have tried other batteries. It just happened abruptly. There was no physical damage to the device. The device, fully charged has been on, and when I tried making a call later in the day, I found a blank screen. When I did a hard reset, the screen remained blank with the indicator light beaming red for a few seconds, and then flashes red light four times at rhythmic interval. Please, what is the issue and how can it be quickly resolved?

Hi don7g,
Do you have access to a computer with the BlackBerry® Desktop Software installed? If so, is the BlackBerry® Desktop Software able to connect with your BlackBerry® smartphone?
If it is, please try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software.
For further instructions, please see the following KB articles.
For Windows® "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
For Mac "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
Please test to make sure the issue has been resolved before restoring any data from your backup file.
If the BlackBerry® Desktop Software is unable to connect with your BlackBerry® smartphone, I would advise trying to force a detection by starting a BlackBerry® Device Software reload without your battery inserted. For further steps, please see the following KB articles:
For Windows® : "How to force the detection of the BlackBerry smartphone using Application Loader" http://bbry.lv/IAfXWd
For Mac: "Unable to application load a BlackBerry smartphone showing JVM 507 or JVM 513 using BlackBerry Desktop Software" http://bbry.lv/J0V8BH
Please note that the last process will remove all data from your BlackBerry® smartphone.
Since it is not detected by your computer, you will not be able to backup your data first. If you have a previously taken backup file, you can restore your data from that backup.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

My blackberry Torch 9800 has been stolen,, Please Help

Good day all,
I need your help. My blackberry Torch 9800 has been stolen, I need to erase all my personal data and images. If there is a way to do this, please advise me.
I really need your help.
Thanks

If you had a third-party app, such as BlackBerry Protect installed, you could accomplish this. If you have no such app installed, there is nothing you can do to wipe your device or track its location.
Make sure you call Mobily to cancel your SIM card so the person who finds your phone cannot rack up charges on your account.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Enter Network MEP (0 Left):

BB 9300 OS V5
PRD- 29973-025
PIN: [removed personal information]
Locked to Vodafone and we have EE SIMS
I have been given the above cast off for my 11-year-old daughter (who does what 11-year-olds do to phones and renders them useless)
I got a Network MEP unlock code off the intrernet and when I entered it the attempts left went from 10 - 0 and I got the message Code Error.
How do I recover from this?

Hi and Welcome to the Community!
Please see this helpful thread to start:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
If you have used up all of your chances to enter the correct unlock code, there is nothing further you can do. Even if you happen to have now the correct code, it is useless. Only the factory can now (legally) unlock your BB. Typically, I've heard that the cost of having BlackBerry do this for you will be greater than the cost of just buying a new one. But, you are able to ask them...see here:
http://us.blackberry.com/support/programs/technical/incident.jsp
Note, however, that this process will start with a fee...
If you obtained your unlock code from somewhere but it was incorrect, your recourse could be with them -- however, they may well question why you exhausted all 10 attempts before contacting them.
If your BB was already MEP locked and you obtained it from a source that represented it as being able to be unlocked, then your recourse would be with the seller you obtained it from.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Only one unlock attempt left - help

I have a BB 8900 which is locked to Orange in the UK and wish to change to Vodafone with whom I have an Internet access account. I do not have an account with Orange and therefore no Orange SIM card.
I have obtained one unlock number from a provider and that did not work. I went to another one who gave me four numbers to try, including the one I already had and none of them worked.
I have carefully checked the IMEI number and it is correct.
I now have only one attempt left and as I understand it, once that is used up, there are no further chances. If I get a new Orange SIM card will that restore the number of attempts to 10?.
What can I do please. Any ideas would be welcome.
Since my original posting I have done a factory reset using KB 18998 on the BB Technical Solution Centre, which entails connecting the Blackberry to the computer and using Command Prompt. The factory reset was carried out ok , but the number of attempts remains as one unfortunately. Is there any way in which the number of attempts can be restored to 10 please.
Solved!
Go to Solution.

Managed to get it unlocked. A highly specialised procedure which had to be done very carefully because there was only one attempt left and there was no way back. Highly recommended and helpful unlocker.
www.unlockdata.co.uk who also trade under TeleGo Ltd (a UK based company)
The problem with the unlock codes I had been provided with did not work with the 2010 Security and MEP-07723-007 should have been used instead of MEP- 07723-003. (don't ask I don't know what it means).
One highly relieved guy.

Password Keeper would not show asterisks. Last attempt left

Suddenly my bb bold password keeper would not accept my password. I know i am entering it correctly. it doesnt show asterisk anymore which is explainable in forums but it would still not accept my password. on 8th attempt i entered "blackberry" and last attempt left. what should i go for. as my data is not backed up yet i am intending to back it up right now before i proceed further with the steps you will kindly suggest.
Thank you

Often users who have multiple numerals in their password will only press the ALT key for the first numeral and not those following, so for instance, if your password were "1234", you might have been pressing "Alt 1234" on the device, which makes the actual password to be "1ers".
Does that make sense? Does it sound familar to your usage?
So check the way you enter your password on the device... do you think you are entering multiple numbers but actually are not?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Update Apn data setting for BlackBerry 9800 torch.

How can I update my Apn data setting on the BlackBerry 9800 torch? Because I am on the AT&T pay as you go plan, but on the pay as you go plan the phone as no mobile network but I have to use the wi-fI because on the 50$ unlimited plan is only talk and text, so I am trying to go to net 10 because unlimited talk and text and web and I have the unlocked code so I can take it over to net to but I when net 10 web page and they say I need to Updated the Apn data setting that the phone will work right, can someone help me, even if I have to someone besides net 10, just so the phone works at 100%.
Solved!
Go to Solution.

Hello!
Here is a KB with instructions:
KB05327 How to set the APN settings on the BlackBerry smartphone
Hopefully it contains something useful!
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Lightroom requires me to sign in 3 or 4 times whenever I use it. I get confronted with a screen telling my trial has 00 days left and I must license or sign in to continue. If I simply ignore any of these repeated requests, Lightroom immediately exits

Lightroom requires me to sign in 3 or 4 times whenever I use it.
I get confronted with a screen telling my trial has 00 days left and I must license or sign in to continue.
If I simply ignore any of these repeated requests, Lightroom immediately exits
.This happens whether or not I sign in to Creative Cloud before attempting to launch Lightroom.
My subscription is in good standing and Lightroom/ Photoshop are up to date. There are no earlier versions installed.

From what you report it appears that you have a trial version of Lightroom 5 perpetual license version installed. Subscribing to the Creative Cloud package PS CC and Lightroom will not activate this version. Try the following.
1. Uninstall Lightroom using the OS system normal uninstall process. This will not affect your existing Catalog and user files and but will just remove the Lightroom Application.
2. Reboot your computer.
3. Open the Adobe Creative Cloud Application Manager and it should give you the option to download the latest Lightroom 5 install package. Proceed to download and install this version and it should be activated automatically, no requirement to enter any license key like the Perpetual License version. It will automatically link to your existing Catalog files etc.

0 MEP tries left

i have 0 MEP trials left on my mobile and i read an article that supposed that i contact RIM to try to help me...
do anyone here have a solution

ibrahimkamel wrote :
i have 0 MEP trials left on my mobile and i read an article that supposed that i contact RIM to try to help me...
do anyone here have a solution
Hi ibrahimkamel
Welcome to BlaclBerry Support Forums
If you had tried all ten attempts then it can only be Unlocked by RIM ,No one can reset the MEP counter or Unlock it except RIM. Look at this Thread which might help you. mep code is blocked .
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Blackberry 9800 touch smart phone

I have recently purchased a new Blackberry 9800 touch smart phone and I am unable to connect to the internet, it tells me I need an Enterprise password, how do I get this, because it seam like I can't send emails or seach the internet until I activate my phone. where would I fine this activation password?
it say's when I try to email, activate your enterprise account,enter details provided by your system administrator.
So, what dose this mean? I haven't got a clue. Help!!!

That message will appear for one of two reasons. One, the phone has an IT policy on it or two, you don't have a proper BIS (BlackBerry Internet Service) data plan with Vodafone.
If you don't have a BIS plan with Vodafone, you'll have to give them a ring to activate such a plan if you wish to fully appreciate your BlackBerry. If you do have BIS with them, then you'll need to do a security wipe of the phone to remove the IT policy. This can be done by going to your homescreen and following Options>Security>Security Wipe or Options>Device>Security>Security Wipe, depending on which OS your phone is running.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

SatNav application for BlackBerry 9800 Torch

Hi,
I hope you will be able to help me.
I have a BlackBerry 9800 Torch and I would like to install a SatNav.
I have seen many navigation applications via the BlackBerry App World website but none off them seem to be very good!
My network provider is Vodafone UK and when I had my Storm 9500 I had the Vodafone Find & Go application (Find & Go is a branded Telmap Navigator application) installed which was a fantastic SatNav. I then bought the Storm2 9520, however, the Find & Go application was not compatible with the Storm2 which was very disappointing.
I have now purchased the BlackBerry 9800 Torch and would like a SatNav application. I have spoken to Vodafone and they have informed me that the Find & Go application is not compatible with the 9800 and as far as they know there are no plans to make the Find & Go application available for the 9800. Vodafone suggested downloading the Telmap Navigator from Telmap which is what BlackBerry use.
I have been on the Telmap website but the Telmap navigator is not available for the BB 9800...which again is very disappointing.
I am a little disappointed and I would have thought that with a SatNav application as good as Telmap Navigator, that has been available to pretty much ever other BlackBerry device, would be available for the BB 9800 Torch as it is the BlackBerry benchmark device.
Could anyone please tell me if Telmap Navigator UK & Ireland is available and compatible for the BlackBerry 9800 Torch?
If not, is it likely to be available for the BlackBerry 9800 Torch and when?
Or, because the other SatNav applications on BB App World are not very good...can BlackBerry suggest a alternative SatNav that is as good as Telmap that is available for the BlackBerry 9800 Torch?
Thank you
Pete

Hi Pete
I couldn't agree with you more.
No sat nav on the torch is a definite turn off. I had a 9700 previously and had telenav running on it (£5.00 per month on your phone bill) but they tell me that they aren't building a version that will support the torch because their main contact in the UK is T-mobile and (they say) T-mobile aren't supporting the torch. Telenav are the company that produce ATT navigator for the states which is basically just a branded version of Telenav. AT&T navigator is available in the states...
I'm not too fussy, tomtom, copilot, navigon, garmin...someone take my money and supply me with a sat nav app please!
Andrew

An error has occured attempting to mount a disk image "5" error #5

for quite some time now, i have not been able to load programs. it seems to have started after i did a firmware update that was meant for a OS 10.5 system and mine is OS 10.4.11. ever since then, every time i would click on "Software Update", nothing would happen, if i were to upgrade to itunes to 8.0 whatever, nothing happens. if i were to try to mount with stuffit expander i would get the following error: an error has occured attempting to mount a disk image "5", error #5. it is getting very frustrating.
any help will be appreciated.

Hi Watsmaster, and a warm welcome to the forums!
If you haven't done any Disk or OS maintenance, then I'm thinking corrupt HDD or possibly some Hardware problem.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.

TS1702 I have an iPhone 4 it won't let me download any apps I keep getting the message that my device has no memory left and I do have 1.9G left what wrong i

I have an iPhone 4 it won't let me download any apps I keep getting the message that my device has no memory left and I do have 1.9G left what's wrong as far as I know everything is up to date on the phone it is running slow please help thanx!

I figured out what was going on the app had miss represented how much space it would take it had said it was 1.2g's however it was really 1.9g's which was all I had left on the phone I downloaded it to my computer first from the apps store then was able to see this. At that point I was able to rearrange some memory to accomadate it's size thanx for the help.
Mick

My ipod touch has 1.1 gb left of space on it. when i try to install an app thats 314 mb it gets three quarters of the way through and says my ipod has no space left. when i go to the storage it also says it has no space left. whats going on?

my ipod touch has 1.1 gb left of space on it. when i try to install an app thats 314 mb it gets three quarters of the way through and says my ipod has no space left. when i go to the storage it also says it has no space left. whats going on?

To download/install an app directly to the iPod you need available storage equal to about three times the file download size. Syncing the app to the iPod requires a lot less. Thus you either have to free up more storage or sync the app from your computer.

My blackberry 9800 has 0 mep attempt left

Similar Messages

Maybe you are looking for