My Blackberry will not receive e-mails or send/ receive BBM. Is there anyone who can help?
Hello,
I have a Blackberry Curve 8520 on T-Mobile and this morning I realised it was not recieve e-mails or bbms. I have taken the battery out and put it back in for a 'soft restart' multiple times, I have updated to the newest software and just recently I deleted bbm in the hope that the messages would return. However, none of this has worked and I was hoping that someone could help me. I might have changed a setting by mistake but I can not tell.
I would appricate any advice.
Thank you.
Give tmobile a call to see if your blackberry data plan is OK. Also have them resend the service books to your device
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!
Similar Messages
-
Hey. I can not sync my iphone with my macbook air. It will not download my purchased music. Writes that there was an unknown error (-42408). Is there anyone who can help me.
Sincerely jimmiHey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
I CANNOT ACTIVATE MY ILLUSTRATOR AFTER FIXING MY COMPUTER. IT SAIS THAT I AM NOT CONNECTED TO INTERNET BUT I AM. IS THERE ANYBODY WHO CAN HELP.
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
please help
Rajeev,
Based on your post, just may not be clear what you are asking for then.
I think your general approach that you have described is correct. Without knowing the source of your data for the internal table, it is hard to completely provide an answer but a typical interface might look something like this:
1. Selection screen with parameters for the file name (If a file is the source of your data)
2. Load data from the file into your internal table.
3. Loop at your data
4. Call the Get Detail BAPI
5. Using the data returned from the get detail BAPI and your internal table create the importing, exporting, tables parameter for your Create BAPI.
This step might need some more clarification. I am not sure if you are using the right BAPI for what you are trying to accomplish. First this appears to be a Create function and not a change, second, it appears that this is for Time Ticket information against a production order. I haven't used any BAPIs for production orders before so I can't give you a definite answer. If you cannot find an appropriate BAPI, you might also try creating a BDC/Call transaction update.
6. Review the error messages/return code from your production order change
7. Output some type of report to the user regarding successful updates, errors, etc.
I hope this helps provide some guidance.
Best Regards,
Chris H. -
I connected my iPad to wireless, now my MacBook will not download new mail (Charter) unless I turn the iPad off. Please help?
Is there anything in this link to help, particularly in the Troubleshooting section at the very end? http://www.myaccount.charter.com/customers/support.aspx?supportarticleid=2234
-
Imac will not turn back on after being unplugged. Is there something I can do?
imac will not turn back on after being unplugged. Is there something I can do?
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset. -
I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.
Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html -
Failure to download or allow sign in started with current upgrade.
Despite inability to sign in, I have access to all settings and address book.
I've "repaired" the inbox folder and checked the firewall settings. Connection to POP server is fast. Downloads for the last week or so (prior to upgrade) have been VERY slow...
Likely the solution is "simple", but I'm very much NOT a "software tech" kinda guy.... If you can help, please use small words ; )''Pupster [[#question-1041384|said]]''
<blockquote>
Failure to download or allow sign in started with current upgrade.
Despite inability to sign in, I have access to all settings and address book.
I've "repaired" the inbox folder and checked the firewall settings. Connection to POP server is fast. Downloads for the last week or so (prior to upgrade) have been VERY slow...
Likely the solution is "simple", but I'm very much NOT a "software tech" kinda guy.... If you can help, please use small words ; )
</blockquote>
No idea why, but the problem seems to have resolved its self.. -
Will not open btyahoo mail or send mail from btyhaoo
Hello
When I open btyahoo mailbox in firefox i cannot open any new or saved mail, neither can i create and send any new mail
I can access btyahoo through safari and google but not through firefox then google
tried uninstalling firefox and installing a new download but no result-> Tap ALT key or press F10 to show the Menu Bar
-> Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click '''Clear Now'''
-> Tools Menu -> Options -> Advanced -> Network -> '''Offline Storage section: click Clear Now'''
-> Click OK on Options window
Check and tell if its working. -
While tring to download QuickTimeInstaller.exe, I get an error message that it is not a Win32 application. I do not know what that means. I am running Vista and Service Pack 2 is installed. I am trying to look at a math tutorial on CD that came with the textbook.
Thank you for any help or assistance.
LauraIt suggests the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Although I can download the additional content im not able to use it as i dont know if this should appear as a new plug in or an audio unit.
The additional content relates to the stuff that is already included with Logic. So, for example, when you download extra kits for Drummer, they go into the folder that has the So-Cal kit and the other kit that downloads when you do the intial install of Logic.
Same with Bass instruments, Guitar instruments, Orchestral stuff. If you had a look at what came with Logic in the initial install, and then looked in those same places afterwards, there's a whole bunch more stuff in there. -
The photos must be viewed in sequence as prepared with the filenames I have chosen to describe them.
How can I just simply transfer this over to a dvd ? Any help is appreciated !
Thank YouThere are two ways to export photos so they remain in the same order as you put them in the iPhoto album:
A:
1 - select the photos in the album and use the Photos ➙ Batch Rename ➙ Title to Text menu with the option to add a sequential number to the file name.
2 - Export out of iPhoto via File ➙ Export ➙ File Export with the option File Name = Title.
B:
1 - select all of the photos in the album and export via File ➙ Export ➙ File Export with the option File Name = Album name with number.
Both method will produce file with the following file name format: xxxx-01.jpg, xxxx-02.jpg, etc., which will be in the order you had in iPhoto when view alphanumerically in the Finder.
OT -
OHH
Please someone HELP!!!!!! I can't get my old card off iTunes acct,keeps saying billing issue ..well the card was cancelled bc it was stolen..and they will not let me delete it they want a NEW CARD ON FILE..NO I NOW KNOW I DON'T NEED A CREDIT CARD FOR THE FREE APPS ECT. SO WHAT'S THE PROBLEM.?I did my daughters w.o. Credit card but they won't let me have same option on iPad 1 I guess I should try from of but idk if it'll make difference,also they apple won't let me update any of my apps..WTH? And one more question how do I take ( uninstall app/ games ) from iPad? I got free games from app store and after three levels u get into games then they want u to purchase the rest of the game? Dammm no more..idk how to take these games off my iPad don't want them ain't paying to finish games...thanks anyone who can help!!!OHH
Please someone HELP!!!!!! I can't get my old card off iTunes acct,keeps saying billing issue ..well the card was cancelled bc it was stolen..and they will not let me delete it they want a NEW CARD ON FILE..NO I NOW KNOW I DON'T NEED A CREDIT CARD FOR THE FREE APPS ECT. SO WHAT'S THE PROBLEM.?I did my daughters w.o. Credit card but they won't let me have same option on iPad 1 I guess I should try from of but idk if it'll make difference,also they apple won't let me update any of my apps..WTH? And one more question how do I take ( uninstall app/ games ) from iPad? I got free games from app store and after three levels u get into games then they want u to purchase the rest of the game? Dammm no more..idk how to take these games off my iPad don't want them ain't paying to finish games...thanks anyone who can help!!! -
I will pay for who can help me with this applet
Hi!, sorry for my english, im spanish.
I have a big problem with an applet:
I�ve make an applet that sends files to a FTP Server with a progress bar.
Its works fine on my IDE (JBuilder 9), but when I load into Internet Explorer (signed applet) it crash. The applet seems like blocked: it show the screen of java loading and dont show the progress bar, but it send the archives to the FTP server while shows the java loading screen.
I will pay with a domain or with paypal to anyone who can help me with this problematic applet. I will give my code and the goal is only repair the applet. Only that.
My email: [email protected]
thanks in advance.
adios!thaks for yours anwswers..
harmmeijer: the applet is signed ok, I dont think that is the problem...
itchyscratchy: the server calls are made from start() method. The applet is crashed during its sending files to FTP server, when finish, the applet look ok.
The class I use is FtpBean: http://www.geocities.com/SiliconValley/Code/9129/javabean/ftpbean/
(I test too with apache commons-net, and the same effect...)
The ftp is Filezilla in localhost.
This is the code, I explain a little:
The start() method calls iniciar() method where its is defined the array of files to upload, and connect to ftp server. The for loop on every element of array and uploads a file on subirFichero() method.
Basicaly its this.
The HTML code is:
<applet
codebase = "."
code = "revelado.Upload.class"
archive = "revelado.jar"
name = "Revelado"
width = "750"
height = "415"
hspace = "0"
vspace = "0"
align = "middle"
>
<PARAM NAME="usern" VALUE="username">
</applet>
package revelado;
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
import javax.swing.*;
import java.io.*;
import javax.swing.border.*;
import java.net.*;
import ftp.*;
public class Upload
extends Applet {
private boolean isStandalone = false;
JPanel jPanel1 = new JPanel();
JLabel jLabel1 = new JLabel();
JLabel jlmensaje = new JLabel();
JLabel jlarchivo = new JLabel();
TitledBorder titledBorder1;
TitledBorder titledBorder2;
//mis variables
String DIRECTORIOHOME = System.getProperty("user.home");
String[] fotos_sel = new String[1000]; //array of selected images
int[] indice_tamano = new int[1000]; //array of sizes
int[] indice_cantidad = new int[1000]; //array of quantitys
int num_fotos_sel = 0; //number of selected images
double importe = 0; //total prize
double[] precios_tam = {
0.12, 0.39, 0.60, 1.50};
//prizes
String server = "localhost";
String username = "pepe";
String password = "pepe01";
String nombreusuario = null;
JProgressBar jProgreso = new JProgressBar();
//Obtener el valor de un par�metro
public String getParameter(String key, String def) {
return isStandalone ? System.getProperty(key, def) :
(getParameter(key) != null ? getParameter(key) : def);
//Construir el applet
public Upload() {
//Inicializar el applet
public void init() {
try {
jbInit();
catch (Exception e) {
e.printStackTrace();
//Inicializaci�n de componentes
private void jbInit() throws Exception {
titledBorder1 = new TitledBorder("");
titledBorder2 = new TitledBorder("");
this.setLayout(null);
jPanel1.setBackground(Color.lightGray);
jPanel1.setBorder(BorderFactory.createEtchedBorder());
jPanel1.setBounds(new Rectangle(113, 70, 541, 151));
jPanel1.setLayout(null);
jLabel1.setFont(new java.awt.Font("Dialog", 1, 16));
jLabel1.setText("Subiendo archivos al servidor");
jLabel1.setBounds(new Rectangle(150, 26, 242, 15));
jlmensaje.setFont(new java.awt.Font("Dialog", 0, 10));
jlmensaje.setForeground(Color.red);
jlmensaje.setHorizontalAlignment(SwingConstants.CENTER);
jlmensaje.setText(
"Por favor, no cierre esta ventana hasta que termine de subir todas " +
"las fotos");
jlmensaje.setBounds(new Rectangle(59, 49, 422, 30));
jlarchivo.setBackground(Color.white);
jlarchivo.setBorder(titledBorder2);
jlarchivo.setHorizontalAlignment(SwingConstants.CENTER);
jlarchivo.setBounds(new Rectangle(16, 85, 508, 24));
jProgreso.setForeground(new Color(49, 226, 197));
jProgreso.setBounds(new Rectangle(130, 121, 281, 18));
jPanel1.add(jlmensaje, null);
jPanel1.add(jlarchivo, null);
jPanel1.add(jProgreso, null);
jPanel1.add(jLabel1, null);
this.add(jPanel1, null);
nombreusuario = getParameter("usern");
//Iniciar el applet
public void start() {
jlarchivo.setText("Start() method...");
iniciar();
public void iniciar() {
//init images selected array
fotos_sel[0] = "C:/fotos/05160009.JPG";
fotos_sel[1] = "C:/fotos/05160010.JPG";
fotos_sel[2] = "C:/fotos/05160011.JPG";
// etc...
num_fotos_sel=3; //number of selected images
//conectar al ftp (instanciar clase FtpExample)
FtpExample miftp = new FtpExample();
miftp.connect();
//make the directory
subirpedido(miftp);
jProgreso.setMinimum(0);
jProgreso.setMaximum(num_fotos_sel);
for (int i = 0; i < num_fotos_sel; i++) {
jlarchivo.setText(fotos_sel);
jProgreso.setValue(i);
subirFichero(miftp, fotos_sel[i]);
try {
Thread.sleep(1000);
catch (InterruptedException ex) {
//salida(ex.toString());
jlarchivo.setText("Proceso finalizado correctamente");
jProgreso.setValue(num_fotos_sel);
miftp.close();
//Detener el applet
public void stop() {
//Destruir el applet
public void destroy() {
//Obtener informaci�n del applet
public String getAppletInfo() {
return "Subir ficheros al server";
//Obtener informaci�n del par�metro
public String[][] getParameterInfo() {
return null;
//sube al ftp (a la carpeta del usuario) el archivo
//pedido.txt que tiene las lineas del pedido
public void subirpedido(FtpExample miftp) {
jlarchivo.setText("Iniciando la conexi�n...");
//make folder of user
miftp.directorio("www/usuarios/" + nombreusuario);
//uploads a file
public void subirFichero(FtpExample miftp, String nombre) {
//remote name:
String nremoto = "";
int lr = nombre.lastIndexOf("\\");
if (lr<0){
lr = nombre.lastIndexOf("/");
nremoto = nombre.substring(lr + 1);
String archivoremoto = "www/usuarios/" + nombreusuario + "/" + nremoto;
//upload file
miftp.subir(nombre, archivoremoto);
class FtpExample
implements FtpObserver {
FtpBean ftp;
long num_of_bytes = 0;
public FtpExample() {
// Create a new FtpBean object.
ftp = new FtpBean();
// Connect to a ftp server.
public void connect() {
try {
ftp.ftpConnect("localhost", "pepe", "pepe01");
catch (Exception e) {
System.out.println(e);
// Close connection
public void close() {
try {
ftp.close();
catch (Exception e) {
System.out.println(e);
// Go to directory pub and list its content.
public void listDirectory() {
FtpListResult ftplrs = null;
try {
// Go to directory
ftp.setDirectory("/");
// Get its directory content.
ftplrs = ftp.getDirectoryContent();
catch (Exception e) {
System.out.println(e);
// Print out the type and file name of each row.
while (ftplrs.next()) {
int type = ftplrs.getType();
if (type == FtpListResult.DIRECTORY) {
System.out.print("DIR\t");
else if (type == FtpListResult.FILE) {
System.out.print("FILE\t");
else if (type == FtpListResult.LINK) {
System.out.print("LINK\t");
else if (type == FtpListResult.OTHERS) {
System.out.print("OTHER\t");
System.out.println(ftplrs.getName());
// Implemented for FtpObserver interface.
// To monitor download progress.
public void byteRead(int bytes) {
num_of_bytes += bytes;
System.out.println(num_of_bytes + " of bytes read already.");
// Needed to implements by FtpObserver interface.
public void byteWrite(int bytes) {
//crea un directorio
public void directorio(String nombre) {
try {
ftp.makeDirectory(nombre);
catch (Exception e) {
System.out.println(e);
public void subir(String local, String remoto) {
try {
ftp.putBinaryFile(local, remoto);
catch (Exception e) {
System.out.println(e);
// Main
public static void main(String[] args) {
FtpExample example = new FtpExample();
example.connect();
example.directorio("raul");
example.listDirectory();
example.subir("C:/fotos/05160009.JPG", "/raul/foto1.jpg");
//example.getFile();
example.close(); -
Mail Will Not Receive After 10.6.2 Update
I just updated to 10.6.2 and now my mail program will not receive any incoming emails. I seem to be able to send however. I'm sorry for another one of these "me too" postings about the mail program not working post update but I'm hoping Apple will see the number of postings regarding this issue and correct the problem.
Ever since I updated to 10.6.2, I have had intermittent problems with sending, forwarding, and replying to emails from both my yahoo and mobileme accounts. I hit send and get the rotating rainbow and end up having to force quit. And now today, it's not downloading any mobileme messages. They are showing up on my iphone but not the iMac.
Maybe you are looking for
-
Confirmation of PM order, what FI posting will be done in SAP
Dear Gurus, On final confirmation of PM order, what FI posting will be done in SAP ? Regards
-
Why when I drag a file to a folder it doesn't open up so I can put it in a subfolder anymore?
Before my macbook was able to allow me to transfer files to other folders easily. My view options on the folders are columns. I was able to drag a file to a folder, and the folder opens on the next column so show it's contents and I can open as much
-
Dought regarding Function module
Hi , I have small dought regarding fm.... since Read_text is a function module can it be changed to RFC , since i need to retrive data from sap to informatica . since some of the long text are also need to retrived to a non sap system . if i c
-
In the AppStore when I try to download an app which I had deleted it won't let me
Ok so iv deleted a few apps and when I go into the AppStore to download them again it says installed and it's greyed out even tough the app isn't on my device :/ what should I do?
-
Excel VBA with 11.0.07 is not working. only works with 11.0.06
I have a Excel program that uses the PDF library in the excel. This allows me to use the PDF viewer in the VBA Form. With the recent update I cannot even open the excel file. As soon as I try clicking on a button excel crashes and restarts. I have ro