My BlackBerry z10 having flash memory problem, free space memory reducing automatica​lly,

After I wipe out the device, it shows 4.4gb used out of 16gb as "other data", after that memory constantly increase as used space in other data, I never update my device it is 10.1.0, what should I do

That is the setting on the camera. FCE is set to AIC  AVCHD 1440 60i as well at 29.97 frames/sec.
So they do match.
Hardware Overview:
  Model Name:    Mac Pro
  Model Identifier:    MacPro1,1
  Processor Name:    Dual-Core Intel Xeon
  Processor Speed:    2.66 GHz
  Number Of Processors:    2
  Total Number Of Cores:    4
  L2 Cache (per processor):    4 MB
  Memory:    10 GB
  Bus Speed:    1.33 GHz
  Boot ROM Version:    MP11.005C.B08
  SMC Version (system):    1.7f10
My card media is all the same. It is what I always record in.
I changed the Matric to plain stereo, and it logged the first two 7 second clips. Then froze on the 57 second clip. I opened in the log/transfer preview and played it at it froze after 20 seconds of playback. Restarted the replay again and after it would play it all, then put the clip in the que and it transfered in. It is like there is not enough buffer to hold all the video in the little clip?

Similar Messages

  • Blackberry z10 hanging and battery problems

    I have a blackberry z10, STL 100-1, after like 4 weeks of using it, i realised that the battery drained quickly so decided to do a security wipe. thats where my problems started. The battery heats up and the phone goes off or rather hangs then goes off. to switch it back on, i have to put it on charger, which it shows battery completely empty even if its full, after a few mins charge the phone works again. This problem occurs usually say when im browsing the a text or whatsapp message is received. any help? oh. and ive tried security wipe like 10 times, problem still not solved

    What is happening is that your on-device battery meter is off-sync with the actual battery charge.
    Connect to your OEM wall outlet battery charger and while still connected and powered on, remove the battery a minute to reboot. After reboot leave to fully charge to 100%.
    Thus will reset the false charge reading. You may need to do perform this procedure 2-3 times.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I upgraded to iOS 5 and I went from having about 15GB of free space to being 4 GB over capacity.  Any solutions which save me from having to re-organize all of my apps?

    After I upgrded to iOS 5, the category of other is taking up 15.3 GB of space.  Prior to the upgrade, I had approx. 15GB of free space on my 64 GB iPad.  My concern is that the only solution to this problem that occurred from the "upgrade" is that I have to do a factory reset.  If I do a factory reset, there are two big pain points.
    1) The amount of time that it will take to get all of my stuff back onto the iPad.  When I first got the iPad, it took about 2 days for the music, videos, and photos to load.
    2) Re-organizing my apps.  I currently have my 229 apps organized into 11 folders and 8 screens.  I know this is a lot of apps, but I don't want to have to go through the struggle of getting it all organized as it is today.  Is there any way to get all of the apps organized the same way post-reset that will not involve a whole lot of work by me?
    I have tried to call Apple support to get help on this, but I have gone through 4 phone calls with hold times averaging 45 minutes before speaking to someone.  After all of this time and effort, their solution is a factory restore and do all the work myself.

    Hi again
    The problem isn´t solved but we now know what it is.
    Because I couldn´t upgrade the last 1-2 times with iTunes I though the problem was my iPod touch 3. generation, so when I heard that Apple couldn´t find or re-create the problem(s), then I flipped out. Sorry about that.
    Because it looks as the problem belong to the Philips speakersystem (real name is DCM 580).
    So when I received my touch back today and after speaking with Apple - DK, I looked at Philips support and found a firmware upgrade to the speakersystem from Sept. 23, 2011. Did upgrade my speakersystem and after that the rechargesystem through the dockconnection worked again. And at this afternoon on the homepage of my speakersystem, Philips tells us, that they have created a firmware update that only needs approval and then will be released at the homepage. So it looks at the whole problems was to some compatibility problems with the speakersystem after upgrading to iOS 5.0.
    Its not easy to know where to start when 2 or more units are involved these days
    Looked in the mirrow then I ofcourse know very well that we allways shall look for firmware and drive updates before anything else. This time I missed that because I have upgraded several time since February and uptil the day before upgrading to iOS 5.0 and none of thise upgrades had any needs for speakersystem upgrades.
    Friendly regards
    Bear

  • Hard Drive free space automatically reducing

    This problem started about mid-day yesterday after 4+ hours of computer use. I was running multiple programs (typically MS Word, Thunderbird, Photoshop, Acrobat Pro, iPhoto, Safari… I also had Parallels 6 running with Windows XP and AutoCAD LT 2008), when I was informed that I was running low on hard drive space. (At that point Parallels/Windows XP required a force quit as they would not shut down normally).
    My hard drive had gone from 35 GB free space to under 1GB (I had noticed that the hard drive was chattering away prior to this occurring). After a restart, I watched as the same thing happened without any software running… the hard drive would keep chattering away and my available hard drive space would slowly reduce from 35 GB to less than 1 GB. It is like watching a slow clock countdown… the reductions are in approximately 0.03 GB increments until the listing gets below 1 GB.
    After it reached a point where the same low disk space was posted again, I waited awhile and everything eventually "reset" with my free hard drive space back to the original number. The reduction in available space then started all over again.
    I verified the disk and repaired disk permissions, and then downloaded iAntiVirus to run a scan for malware. Everything reported fine.
    As of today, the same thing is still occurring. The available space steadily decreases over time, and once I have less than 8 GB or so available things really begin to slow down between software (and I have to make sure I shutdown Windows XP/Parallels to avoid having it lock up).
    What should I be looking for? My of my software updates are downloaded and installed.
    Thanks

    Less than 10GB can result in total loss of everything when the directory can't be written. Less than 10% is dangerous as well. For performance, 40% free space on boot drive.
    Move files off your system drive!
    If you can, put media files on one of the other three drives.
    Never use the boot drive for VMs or for CS scratch.
    Keep the boot drive to minimum, just the OS and applications as much as possible.
    I'd go with 300-600GB WD 10K VelociRaptor for system, another for scratch, 2 x 1.5TB WD Black for media files and VM.
    Use console to watch system.log and see where space is being used if you are unsure with OmniDiskSweeper, see if there are hidden files and folders. I assume you aren't running any torrent software. Take a look under "/Volumes" and make sure there isn't any data there (normally hidden .Volumes should have only alias mount points).
    And, much more important as well, clone your system with SuperDuper; run Alsoft Disk Warrior to repair and rebuild the directory on the new cloned system drive. Maybe after you remove and off load as much as possible first. And no, don't rely on just Apple Disk Utility, but sounds like the drive directory is in trouble. Also, your free space is too small, too fragmented, and why your VM crashed.

  • BlackBerry Z10 Battery Life - Infinite Problem ?

    Hello,
    Seems that the Z10 battery life is a problem with difficult solution - a lot of people complain about it frequently.
    I've been using my Z10 since August last year. I never end the day with battery, but I use a lot email and internet browsing - always with the phone in my hands.
    Of course, since day 1, I have all the tweaks recommended by everyone: low brightness (lowest possible), apps closed, wireless off when there's no network, bluetooth off, etc etc
    Recently, since last software update, my battery drains incredibly fast. From 3 to 5 hours, even without touching it. Doesn't even last one night still with battery full and sleep mode.
    Sometimes I notice the phone is very hot and draining really fast.
    Last week I was abroad and NOT using the mobile phone (flight mode on), and couldn't last even one fullday (8h).
    Anyone can help me trying to find the cause for this problem? 
    Many thanks !

    Im having same problem   but its been since lastweek when I updated bbm     does anyone knis how to downgrade bbmso I can try that 

  • BlackBerry Z10 OS Update + WiFi Problems

    Hi,
    Having updated yesterday, Saturday, to the latest OS I have noticed that my WiFi connection keeps being dropped. To use Browser, or any other App, I have to restart my phone.  The WiFi then works until I stop using the phone. When i next wake the phone the WiFi is still connected but not working.
    Any ideas?

    Tried that! Also tried switching from Landline provider to Mobile network, both WiFi, and it makes no difference!

  • MB mid 07 2,1 core 2 duo, 2g memory, plenty free space....

    Anyone else with Mac like mine try upgrading to 10.8.4? Any lagging? Noticeable absence of features? I have to spend 20 on Lion or Mountain lion either way.... Is it worth it?

    It sounds like you are talking about this MacBook: http://support.apple.com/kb/SP18
    That computer does not support Mountain Lion, but you can install Lion. 2 GB is the minimum amount of RAM required for Lion. You can actually install up to 4 GB of RAM in your MacBook, but it will only recognize 3 GB.
    http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.16-whit e-13-mid-2007-specs.html
    http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
    I highly recommend maxing out the RAM for maximum performance.
    NOTE: The only way to purchase Lion currently is to contact Apple directly: http://www.apple.com/support/contact

  • LOTS of Memory problems on new 8 core

    I just moved from my totally stable G5  running Logic Pro8 on Tiger to my new Mac Pro 8 core. I am having nothing but problems with
    low memory issues. Everything is up to date and it doesn't seem to matter if I'm in 32 or 64 bit, running reason in Rewire or not. I am having
    trouble narrowing down the problem. It seems to be random. I have seen a lot of posts about this but no real solutions. I'm thinking I got
    a bad computer. it's 2 months old. This computer has 6 gig of RAM. I have talked with lots of friends running the same systems with
    no problems. What is the latest? I have been on the phone with Apple and Sweetwater and it's all vague. A couple examples and as you can see I don't have
    that much going yet. WAY less than I could run on my G5. I have also been unable to get a second monitor to work with the mini display to DVI connector
    but it did work with mini display to VGA on the same monitor which is weird, and it seemed slow.
    (Mac Pro 8 Core Snow Leopard 10.6.8 - Logic Pro9 9.1.5 - Reason5 (tried 6 for 64 bit as well) - APOGEE Ensemble - Omnisphere, Stylus, KONTACT4,
    East West Play, Superior Drums, UAD 2 and others)

    OK. Here is a perfect example of what I am dealing with. I have a song open with a movie because I am scoring today (I never had trouble on my G5 importing and workin with movies and dialogue tracks). I have Reason open
    with one of the Reason5 Bass sounds, which takes alot of memory but again never an issue on my G5. I have TWO audio tracks with no plug-ins. Superior Drums, one kit. 1 ESX with a simple cymbal swell sound. I try and load a pad in Omnisphere and I get the below message. If I turn the bass into audio and quit Reason5 it will let
    me load the omnisphere sound, so I'm wondering how much of this is a Reason/ Rewire issue. Again never had
    trouble with this on G5, Tiger, Reason4 and Logic8. I am running at 32 bit because Reason5 is not 64 bit. Reason6 is 64 bit and even though I don't like the new interface I will pruchase it and run at 64 bit if it will
    work. Again I keep hearing different things about 64 bit and 32 bit. I'm trying both and I don't see any
    consistent change, still weird and random memory issues.

  • How to reset it(free up memory)? [for 3110c]

    I have such problem - 9mb is fully used by sms messages. I inserted 1gb micro sd card. but there is only 75kb of free space... How to delete every thing?? when I try to delete e.g. gallery or other files- phone "freezes"... how to reset it? [3110c nokia].
    when I connect to PC - it does not connect via usb.
    also when switching it ON - white screen opens.. long pause.. and then it goes normaly.also - it restarts sometimes.
    Thank you.

    main problem - "message storage memory not ready" - while trying to send sms.
    also - while trying to take a photo - "memory is full" then it writes - "72.5kB memory available. free some memory?". I say yes - when "delete from" appears... messaging section is 3,8mb size. when i try to access/delete it - phone freezes.... so???
    when i try to delete "contats" in my phone - it tries to do it.. but after long long loading ir restarts...
    how did i got this error? I connected nokia to PC via USB cable, then chosed "data storage device" mode. After I disconnected, I can't access any Message related functions anymore. It always displays an error "Message storage memory not ready". I tried restarting, restoring factory defaults, taking out the battery/SIM but nothing helped.
    update firmware? i tried. but in 3rd step - while writing data to phone via usb - it "disconects".
    yes, i can get it to service center - warranty is available [i used it only for ONE day]... but i want to solve this problem for my own
    also - The format code is *#7370#. but it dont work on 3110c. any ideas?
    ...i think the phone memory is corrupted....
    Message Edited by gedas on 30-Dec-2007 09:35 PM

  • Removing free space in DMG file

    I have a 7GB .dmg file that I'm trying to burn to a DL DVD. When mounted (and in Disk Utility), the file shows as having 1.2GB of free space. If I try to burn it in Toast 10 or Disk Utility, I get an error saying that my blank DL DVD can't fit the 8.2GB file, even though it only contains 7GB of actual files. How can I "delete" the free space in this .dmg file so that it will fit on a dual-layer DVD?

    Peter Petracca wrote:
    I have a 7GB .dmg file that I'm trying to burn to a DL DVD. When mounted (and in Disk Utility), the file shows as having 1.2GB of free space. If I try to burn it in Toast 10 or Disk Utility, I get an error saying that my blank DL DVD can't fit the 8.2GB file, even though it only contains 7GB of actual files. How can I "delete" the free space in this .dmg file so that it will fit on a dual-layer DVD?
    What's interesting is that a blank DL DVD has a capacity of 8.5 GB.

  • How does repeated snapshot import impact tablespace free space?

    Hello,
    Our client is doing DEC-2014 reconciliation in FCM. Every time he changes profile mappings he has to do snapshot import again. So far he did at least ten times snapshot import for DEC-2014 period. In our FCM database Tablespace FCM_TX_TS_DATA free space is reduced 7 GB for this period already by querrying dba_free_space table.
    By my understanding during the repeated snapshot import for the same period, the previous load data is deleted and the current load data is inserted. After data delete the table space will not be set free, and high water mark will not be reset.
    During snapshot import will the deleted blocks from the previous load be reclaimed when new load data is inserted in the table? If not, what is the best way to reclaim the free space in FCM_TX_TS_DATA tablespace?
    Thanks,
    Hongfei Liu (AT&T)

    Przemek P wrote:
    Hallo. I need to replace all schemas from one server to another. I want to know how much free space will be left on /data after this kind of refresh. Both servers are Oracle 9 so I will use exp/imp. Here is how I do it. Could you check if I think good? On target server there is 72 GB free space on /data.
    Filesystem Size Used Avail Capacity Mounted
    /dev/vgsmxdata/lvsmxcopy 194.74G 122.56G 72.18G 63% /data
    Overall size of schemas to be exported from SOURCE_DB is 150 GB. The same schemas on TARGET_DB takes 90GB. So difference is 60GB. Free space in datafiles in TARGET_DB is 30GB. Does it mean that in first place the free space in datafiles will be filled and after that datafiles would be extended? That would mean that a database would extend to 150GB and free space on /data would be 40 GB after refresh. Am I right?
    yes

  • BlackBerry z10 device memory problem

    I have a problem with my BlackBerry z10 device memory. Over time the so called "other data" keep growing, eating up the internal memory even though i didn't install new apps. So now i have less than 1 gb free storage and keep getting message that i should move some files to the external memory. The "other data" is now at 14.8 gb. BlackBerry 10 os don't let us see the content of this data but i know that all of the apps i installed take less than 4 gb. I wanna find the solution before i factory reset my z10. I don't like to have to install all those apps again. 

    MaxMem was a tool that could "free up space" in OS's 4.2 to 6.0.  It hasn't been updated since sometime in 2008.  There is no BB10 version.

  • My Blackberry Z10 restarting itself & also having Network Problems

    Hi Guys,
    I have been using Blackberry Z10 for +/- 16 months now and I was happy with it from the beginning but as time goes on, it's frustrating me a lot as a result I sometimes question myself if I ever made the best decision for choosing "Blackberry" than other Cellphone Manufactures like Samsung or iPhone.
    My Handset is running the latest OS Version: 10.2.1.3247 and I always update or upgrade it as soon as there's new release hoping that it will improve but that doesn't seem to help either. To add more salt on the wound, it keeps having Network problems during the night and weekends and I would much appreciate it if this problem could be resolved ASAP.
    Frustrated Customer,
    Z. Matu

    OK, I was having a very similar problem, and I had never done a security wipe since owning the phone. So, doing a security wipe cleared the issue up for me 99%. Once in a great while I will still get a restart. But it's very, very infrequent.
    I know it can be a pain doing a security wipe, because it basically resets your phone (without effecting the OS) as if new -- but that means removing all your contacts, messages etc. So, be sure to back it up if you try it.
    Also, be sure your battery isn't loose in the housing. I also has this issue (and it caused random restarts) so cut a tiny piece of a business card and shimmed the battery on the side opposite the contacts. Shimming the battery would be a simple fix, if it worked.  So, maybe you'd want to try that first. 

  • Blackberry Z10 OS Upgrade + BBM Status Problems

    Hi
    First of all I am having problems updating my Blackberry Z10 OS Software as I have version 10.0.9.348 and from what i have read in the forum that it is the Carriers who is responsible to release the upgrade but i have already spoken to them and they are NOT AWARE OF ANYTHING! what can i do ??? 
    Second problems is with the Blackberry Messenger as my contacst are changing their Status and personal messages but i am not getting the updates and it's not Changing ! 
    I have tried to format my device 3 times so far tried to do the upgrade from Blackberry link but I am facing the same issue that my device is up to date! ..
    Please let me know how can i resolve this issue! as i am getting really upset ! 

    salsayegh wrote:
    First of all I am having problems updating my Blackberry Z10 OS Software as I have version 10.0.9.348 and from what i have read in the forum that it is the Carriers who is responsible to release the upgrade but i have already spoken to them and they are NOT AWARE OF ANYTHING! what can i do ??? 
    Who is your carrier?
    There is nothing you can do except wait until your carrier has it released, or swap a SIM card temporarily to a SIM which has released the upgrade.
    You can't force the upgrade with the Link software.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problems with the location on facebook blackberry z10

    hi ,
    my blackberry z10 facebook application doesn't show my location when i update a status or a check-in
    i will be pleased if you could help me to solve this issue

    This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Maybe you are looking for