My BlackBerry z10 turnoff automatica​lly when battery reaches 75%..what we do??Pls help

My BlackBerry z10 turnoff automatically when battery reaches 75%..what we do??Pls help

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please try it again but increase the wait time in step 4 to 2 hours, and perhaps as long as 3-4 hours. Sometimes this can recalibrate the battery meter.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Mbl switchoff automatica​lly,when battery is bellow 30%

    My black berry z10 which I had bought in this june,is being switched off at any point when battery is bellow 30%....

    With wall outlet charger connected, let it charge at least 15 minutes and LEAVE the charger connected and remove the battery and replace it to reboot.
    The device has its own on-device battery meter and the battery knows it's own charge/discharge computation. Often the device and the battery will disagree, or be "off sync" in the power remaining in the battery, and the reboot as described will reset that on-device meter.
    Compliments of @JSanders 
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • My iphone 3g got stuck with the apple logo and loading bar since  last night when i try to reset the iphone pls help thanks!

    My iphone 3g got stuck with the apple logo and loading bar since  last night when i try to reset the iphone pls help thanks!

    Can you reset the phone by holding the on/off switch and home button down until your phone reboots and the Apple logo again displays?

  • BlackBerry z10 switching off automatically when the battery is less tha k 50% and opening when connecting to a charger

    BlackBerry z10 is switching off automatically when the battery is between 40 to 50%. And opens when I connect the charger.
    First it gives a logo of a red sign. And the light. Then after few red light it opens. Pleaseee help.

    I had the same problem, it happened as soon as I got my phone so Telus replaced it under the 30 replacement policy. If past 30 days they repair it.
    Have it repaired or replaced.

  • Blackberry z10 launches Music App when calls are ended

    Just bought a new Z10 and most times when I end a call the phone automatically launches the Music App and I then have to close it down. App launches as soon as I press "End Call". Anyone experienced anything similar? Very frustrating.

    Hi mhusni,
    Welcome to the BlackBerry Support Community.
    When using the country code included in the phone number field of contacts, you may not be able to see contact names on incoming calls even though the country code is correct.
    This KB article may provide more information. "Caller ID does not show associated contact when country code is included in phone number" http://blackberry.com/btsc/KB33685
    Let me know if you have any other questions.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Switching off automatically when battery reaches 63 percent

    Hi , Im using  blackberry Z10 of os version 10.2.2141 my phone automatically swiching off when battery level reaches to 63% it again restarting when i connect to charger...Any Help....

    You can't charge with the battery out of the device.
    What is happening is that your on-device battery meter is off sync with the a the actual battery charge. Connect to your OEM wall outlet battery charger and while still connected and powered on, remove the battery a minute to reboot. After reboot leave to fully charge to 100%.
    Thus will reset the false charge reading.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Can I keep the power cord plugged in when battery reaches 100%l?

    Hello,
    I'm assuming the battery stops recharging when it reaches 100%, right? In other words I can keep the power chord plugged in without any risk of "overcharging". Correct?
    Thanks.

    toni1964 wrote:
    Helpful, thanks. FYI, 2 Apple agents at Mac support have advised otherwise (said I have to remove the cord).
    How bizarre....I have a 2.5 year old MacBook that gets great battery life (~4hrs) and begs to differ. Anyway, Thanks for the Star!

  • Z10 Freezing, automatica​lly turning off, battery

    I've had my Z10 since Saturday June 1st. So far I'm really enjoying it, having fun playing with it and getting use to it. However, since getting it it has turned off on its own several times and froze a few times. Is this a bug that will be fixed or a temporary thing that will fix itself or should I bring it back?
    My other issue is the battery. Charging seems to vary. The other night I plugged it in to charge and after 8 hours it was still charging. Other times it takes a couple of hours. 

    That is odd eight hours to do charge, something could be wrong with the device inless there any other solutions out there!
    Want to contract me? You can follow me on Twitter @RobGambino
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • My Z10 device automatica​lly encrypted all my data and has refused decrypting

    Dear team,
    kinly help with a solution to this problem. My BB Z10 device has its encryption button 'ON' and has refused to be turned off. On several occassions, i have tried decrypting both the device and SD Card but it refuses. How do i trobleshoot or fix this permanently ? I think its a bug in the system.
    regards,
    Solved!
    Go to Solution.

    calli_234 wrote:
    Dear team,
    kinly help with a solution to this problem. My BB Z10 device has its encryption button 'ON' and has refused to be turned off. On several occassions, i have tried decrypting both the device and SD Card but it refuses. How do i trobleshoot or fix this permanently ? I think its a bug in the system.
    regards,
    Hi
    Could you explain what you mean by "...refused to be turned off..."? Is the ON / OFF button greyed out? Are you getting some message when you are denied decryption?

  • W530 - Display on/off automatica​lly when connect/di​sconnect power adapter

    Hi,
    Display turned off/on when connect or disconnect power to my laptop. is there any setting that i need to change? or what may be the issue. 
    Thank you .
    Suresh.
    w530 :  i7-3720QM, 250gb SSD, 500gb HDD, 24gb.
    Solved!
    Go to Solution.

    this is working for me!
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-​series/T410-T420-Screen-flickering-randomly-screen​...
    Answer
    Ensure that your BIOS, Power Manager, GPU driver have been updated to the latest version available. Check Link
    Right click on Desktop and select "Graphic Properties"
    Select Power
    Select Power Feature
    In Graphics Power Plan Settings, change drop down menu to "On Battery"
    Uncheck "Display Power Saving Technology"
    Press "OK"

  • Blackberry Z10 and Smart Card Reader Battery Life

    We have several users with new Z10s using Smart Card Reader 2.  After activation with BAS10, users state the Smart Card Sled battery life has dramatically decreased from the old setup with 9930s on BAS5.  One user states he can have it fully charged at work and it will be dead by the time he gets home.
    I searched around a bit, and haven't found anyone else reporting this issue.  Any ideas what might be causing this?

    Hi my two Z10 don't have this issue, what OS version are you running? The newer version should have fixed the battery issue.

  • Blackberry Q 10 automatica​lly turns on after i have shut it down

    Hello, when i shut down my Blackberry Q10, it automatically turns on again after a couple of seconds. I have checked for some new Firmware already, but my device is up to date with the firmware release 10.3.1.1779 Can somebody help me?

    Hi and Welcome to the Community!
    That is a very strange problem. Did anything change just before this behavior started? A new app? An update of some kind? Something else?
    Let us know.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My blackberry z10 shuts down at 20% battery

    i'm having this problem since 3 days ago. my mobile shutts down at 20% battery and i can't turn it on from the moment it shutts down..
    what should i do?
    these are the details of my phone:
    Model Number: STL100-1
    OS: Blackberry 10
    Software Release: 10.1.0.273
    OS Version: 10.1.0.1720
    Build ID: 508730
    thanks

    Good day
    Welcome too BB forums
    Try this method below Good Luck!
    The on-device battery meter is off sync with the a the actual battery charge. Connect to your OEM wall outlet battery charger and while still connected and powered on, remove the battery a minute to reboot. After reboot leave to fully charge to 100%.
    Thus will reset the false charge reading.
    Want to contract me? You can follow me on Twitter @RobGambino
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Macbook shuts down unexpectedly when battery reaches 20% and unplugged

    I noticed this behavior after installing the Bonjour Update 2010-001 (version 1.0) and the Remote desktop client update (version 3.3.2) last night. Upon reaching 20% of battery capacity, the macbook shuts down, and will not restart until it is plugged in. There is no warning, it just turns off.
    Does anyone know what's going on?
    Message was edited by: incomethax

    Wow! I recently had this same EXACT problem and called Apple Care about it last week and said that they cannot do anything about it since my battery cycle is too high ( only 315) ! MacBook is the same model as yours. I finally brought mine in today at a local genius bar (Otay Ranch) and they replaced the battery even though My Mac's just a little over a month its 1 year warranty. I will now calibrate this battery and see if the same problem persists. When I called about this problem, the Apple Care rep says that he has never seen this problem before but now I just saw this and glad that I wasn't the only one, maybe its a faulty design on the first generation Unibody with removable batteries (Late 2008)

  • Macbook pro shuts down when battery reaches 90%

    Ever since I installed iOS, both my Macbook Pros have started showing the same strange behavior. On battery power, they suddenly shut down even when there is still supposedly plenty of power left. Last night one of them (the newer one) shut down at 90%. the other shut down at 75%. Any ideas?

    I really hope that sig doesn't work for Apple Support... or at least he doesn't anymore.
    Allan, sometimes people make mistakes speaking technical words, specially if those are Apple achronims. What differentiates a good answer from a waste of time is when one makes an effort to understand what the other is trying to say and gives a potential solution.
    However drmezan, has wasted his time with you two explaining his problem until he got the question corretly formulated, and when at last he manages the way you like it... none of you reply... is this a joke?
    Are you kidding people here or what?
    drmezan:
    I'm suffering the same situation here, however if I plug it to the power supply it doesn't shuts down.
    Would it be related to the temperature ? It's true that my Mac Book Pro gets really hot quite quick, but it only turns off suddently when running on battery.
    Any help would be appreciated.
    Thanks. 

Maybe you are looking for

  • SapScript Position

    Hi, I want to change the position of a BOX in sapscript. So I used the following commang /:   POSITION WINDOW /:   POSITION XORIGIN '-0.5' CM /:   BOX WIDTH '8.5' CM HEIGHT 5 CM FRAME 10 TW It works fine. I can really see that the BOX moved 0.5 cm on

  • Windows Kernel Debbuging: Debug over virtual serial port with WDK 8.1

    I'm currently having some issues doing kernel debugging of a Windows 7 x64 target from my Windows 8.1 x64 host machine. I'm running Visual Studio 2013 with WDK 8.1 on my host and have provisioned my target machine running in VMWare. Here are my confi

  • Using $CUSTOM_TOP in PL/SQL

    I am using a PL/SQL package to write a file to $CUSTOM_TOP/out. This package need to be run in different instances, the $CUSTOM_TOP value differs. My question is - How do we use the value of $CUSTOM_TOP inside a PL/SQL package? TIA

  • SAX parser not finding my DTD. Help please

    I have written a small XML file and its DTD that are stored in the same folder which is C:/Work/pdftools. Here is a part of the code that is generating errors: inputSource.setSystemId( "c:/Work/pdftools/userSettings.xml" ); parserAdapter.parse( input

  • Regarding scheduling interface

    Hi    Xi guru's         please give information how to schedule our interfaces   In our project i have to run our run our interface weekly once i.e Xi need to pick the file at friday morning 5:00 clock. For frequent picking of file we go for poll int