My blackberry z30 does not turn on with red light flashing

hi i have a blackberry z30 , after charging my blackberry z30 it does not turn on and show me a red light blinking 5 times...what i should do? please help. 

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):Connect your BB to the wall chargerLeave it alone for 2 hours, no matter what the LED or the display doesHold the up/down volume keys until the device is fully powered offWait 15 minutesPower up normallyWait another 2 hours, no matter what the LED or the display doesThis has been known to "kick start" some BBs. If it fails, then please try again but increase the step 4 wait time to 2 hours, and perhaps as long as 4-5 hours. If it fails to help, then your next step is in-person evaluation by a qualified technician. If you remain in warranty, seek support under those terms. If you have no warranty, then seek out a local (to you) shop with a qualified technician and have them provide you with a proper evaluation and estimate.
Good luck and let us know!

Similar Messages

  • ZR65MC camcorder does not turn on with battery in position unless the power adapter is plugged in

    Bought a ZR65MC camcorder in 2003.  Enjoyed it so much, but a couple of yrs. ago, the tape compartment stopped opening.  I just purchased another ZR65MC (used) on ebay in hopes that I could at least get the videos off & onto DVDs.  Also, we are planning trip to Yellowstone soon, so camera/camcorder will be nice.  Problem:  The used one does not turn on with a fully charged battery unless the power adapter is plugged in.  I assume battery is good because it turns on my older camera.  I do need backup batteries in both, but have not done this yet.  Please tell me I have not purchased a bad camera, maybe just doing something wrong?  Would have never purchased a used camera online, but did this time.  I have ordered a new battery BP-522 with wall charger.  It should arrive next week.  Any suggestions?

    Hi Sharon72064,
    If the new battery won't power the camcorder without the Compact Power Adapter, unfortunately, it's likely that an internal component has malfunctioned.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • NBFAN does not turn anymore - LEDs are still flashing

    Motherboard  : Neo2 Fis-2r
    Subject         :       NB FAN
    description    : I am refering to the fan that produce many colors
    Consequence: Annoying reboot time to time.
    My last major action was to move to WinXP SP2.
    keyword    : North Bridge FAN, NB FAN, LEDS WORKING,
    I have just noticed that this fan does not turn anymore. It is connected to motherboard and the flashing colors(LEDs) are still active ( blue, green, ... ) but I don't feel any wind near the NB FAN and moreover I see the FAN that does not move.
    Could someone tell me if there is any check box that can provok such behavior of the NB FAN ?
    If not, should I consider it is dead ? Could I return it to MSI if so ?
    I have seen it is not too risky to run the motherboard without it but since I have gotten annoying reboot, I need your comment to solve this enigma  .
    Thank you in advance
    Others posts:
    # NB FAN works while the LEDS do not (The opposite problem)
    north bridge fan leds don't work

    Motherboard : 865Neo2 Fis-2r
    Subject : NB FAN
    description : I am refering to the fan that produce many colors
    Remove this NB FAN is not really an option for me.
    I would like to be sure it is not the cause of my problems.
    Thus, I have checked my hardware with SpeedFan in case
    my reboot problems could be provoked by something else.
    First of all, I have tons of hardware in this PC ( 7HDs, 1DVD and 9 fans² ).
    ##SpeedFan report:
    temperature
    TEMP3: 55°C ( What is it ? )
    TEMP2: 37°C
    OS HD : between 47°C to 55°C
    Others 6HDs : Between 39 and 42°C
    FAN SPEED
    FAN01 : 2722 RPM ( I suppose it is the CPU fan )
    FAN02 : 0 RPM
    FAN03 : 0 RPM
    The TEMP3, which is highlighted in red, makes me wondering what it would mean and what it refers to.
    Could someone help me on this one   ?
    ²Fan : 7 fans with my Thermaltake tower + 1 NB FAN + 1 CPU FAN

  • Phone wont turn on and red light flashing 5 times with pause/s in between

    i was charging my phone, after 30 minutes i unpluged the plug from the mains and typed in my password. from there on the phone went completely blank and all i was seeing was a red light flashing. I charged the phone for 12 hours and now i cant see the red light anymore. The only time i see the red light flashing is when i use the usb or the phone charger. At the moment the phone is completely blank i cant switch it on. Also ive tried using the usb which didnt help my laptop doesnt recognise it neither does the desktop manager.
    Message Edited by SgtAssassin on 10-11-2009 05:22 AM

    Hi and Welcome to the Community!
    Without the use of the charging port, tests will be more difficult, and results less definitive. Nevertheless...this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note please that "known good" and "new" are not necessarily the same thing...while rare, a new battery certainly can be defective. The best (and, btw, least costly) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    If the result is that your BB is the issue, then you will need to seek out a local (to you) shop with a qualified BB hardware technician to give you a proper evaluation and estimate. If you remain in warranty, you could instead seek support under those terms (assuming your warranty is not void).
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Q10 has locked me out completely. Won't turn on but red light flashing to specific pattern

    Help! Turned my Q10 off yesterday to reset as emails not getting through. Now won't turn back on - just a little red light flashing at top right of device in a specific pattern. Nightmare-any ideas??

    Connect your Q10 to the known working OEM wall outlet charger.
    After being connected several minutes, LEAVE it connected and remove the battery a minute, and reinsert... does it reboot?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My BB won't turn on the red light flashes and the key's light up

    Hi
    I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer.  The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on.  I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy.  I have only had this phone since July last year.  I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
    Louise

    Hi,
    The way you presented it made me think it had just happened.
    So you have had the phone since July has it ever worked?
    Most likely you are missing some or all of your device OS and you'll need to reload the device.
    Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
    Thanks,
    Bifocals
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Blackberry Keeps Rebooting a little then stops red light flashs then reboots again.

    Hi.
    My blackberry Curve ran out of charge whilst I was a college I went home and charged it. it was fine, Went to the gym and it ran out of battery again. (That day it ran out of charge really quickly) Anyways I get home to charge it and it wouldnt charge, so I took the battery out and now everytime i put the battery in it it Reboots itself the bar moves up like 1cm then the screen goes black and the red light comes on, the red light goes off then its reboots itself back to 1cm and repeats this, Ive tryed to use a different battery but the same happens and I cant connect it to my computer as it just turns off and Ive not even had the phone for a year.

    Please help!!!!! my sons blackberry keeps rebooting itself then as it is nearly done it starts again, please can someone help maybe it needs a software upgrade how can one do this when the ph not even coming on

  • Blackberry torch does not get charged with a car adapter?

    Blackberry torch 9800 gets charged from laptop and wall mount.
    When I tried using thru car adapter it would not work.
    I have checked the adapter, it charges the other non blackberry mobile.
    My Question, do we need to have a special car adapter for blackberry touch OR
    do we need to make some changes in the setup

    That would be unlikely for a couple of reasons:
    1. The handset is only 4 days old.
    2. It charges flawlessly using the same cables on every other source - AC wall charger, laptop, PC, BB charging cradle, aan also an AC wall charger plugged into a cigarette lighter inverter! It always works in these scenarios.
    The only time it fails (and quite consistently) to charge is when the charging source is a car cigarette lighter USB adapter. And it fails whether you use it in a car or with an AC wall cigarette lighter converter.
    Please take a look at my other post from last night - I described all the things I tried.
    If u still feel it is my handset, I would appreciate a referral to at&t. Minimally, I would like to try a new handset before replacing this one. It takes a long time to get it configured the way I want it.
    Thanks,
    Ashoke.

  • 5800 does not turn on with SD card

    Hi,
    I have recently used Nokia PC Suite to delete some SMS from my Nokia 5800.
    After that, the phone has stopped turning on when the SD card is in.
    If I remove the SD card, the phone will switch on normally.
    How can I fix this?
    Thanks,
    Marco
    Message Edited by marcoterz on 06-Jan-2010 12:13 PM

    Take the card out of the 5800. Put it in a PC and run a Check Disk on it. Fix all the errors. Re-insert it into your 5800.
    If that doesn't work. Copy the contents of the card on your PC in a directory. Format the card. Copy stuff back on it. Re-insert it into your 5800.
    Gilles. 

  • I dropped my blackberry now all I get is a red light flashing

    I dropped my phone in the garage.. heck it wasn't even that hard. it hit my shoe first. now it only flashes the red LED any thoughts????

    With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Imac  27" does not turn off

    Hi,
    I have a brand new iMac 27" all in one, which works perfectly except for the fact that 3 times out of 4 it does not turn off with the normal command and I am obliged to turn it off with the back switch, after it remain for various minutes  with the blue window on and the wheel running.
    Initially I tried to disconnect an external HDD which was connected by USB and seemed to have solved the problem for a few days, but now the problem shows up again.
    At the moment I have connected only a Bamboo device on the USB port.
    I have tried to Verify the HDD and repair the disk, but no improvement.
    Any suggestion on how to proceed?  Thank you
    SS

    If all the prior steps have not resolved the issue then at this point I would suggest:
    Remove any additional memory you may have added to the system
    Reinstall of the OS: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8177.html
    If the issue persists after you follow the above steps, you may wish to make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.
    If this issue was occurring right out of the box on the brand new system without you adding any additional software / migrating data from an older Mac, be sure to let them know that as well.  Its unusual to have a blank, brand new system have this kind of behavior so that will save them some diagnostic steps.
    Best of luck to you.

  • TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

    My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

    I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
    Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

  • My problem is that the iPod does not turn on. Everytime I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a warning sign.

    IS MY IPOD DEAD?!?!?!?!?
    I think I have the previous iPod Classic with a black glossy front and I am pretty sure it is glass at the front. My problem is that the
    iPod does not turn on. Every time I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a
    warning sign along with the Apple support website. At the same time I can hear the internal mechanics which is also very loud. I have attempted
    to charge it as well as connecting it to itunes but no success. Could you please help?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • When I turn my iPod the screen does not turn with it  :(

    When I turn my iPod the screen does not turn with it  >:(

    Try here:
    iOS: Not responding or does not turn on

  • Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793677]''
    Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793677]''
    Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

Maybe you are looking for

  • Wipe Clean

    How do I wipe my 3g clean as i have now sold it many thanks

  • Object use count is negative when two users access ViewObject at same time

    I need help! In my application, if two users execute the same view object at the same time, the users will see a combination of the two record sets: One user will receive their requested result set plus part of the other user's set and the other will

  • 11g how to get participant information

    how can I get the participant from a human task in 11g? Can I map something from the execData on output? I want to maintain a variable 'lastParticipant' throughout the process. Alternatively I could use it in a managed bean if I knew how to extract i

  • Is it possible to enter a translation in SE63 for a non-installed SAP lang?

    We are attempting to create translations in Swedish but receive an "Incorrect code page" message when attempting to enter text into SE63 (Long-text). We don't have Swedish installed as a language within our old CRM 4.0 system and expect this is the r

  • Right clicking in Windows XP with Boot Camp Not Working

    When I right click with two fingers in Win XP with Boot Camp it doesn't work. I have to plug in a mouse which gets annoying. Any ideas? I'm running Boot camp 2.1 with XP SP3. I have a new Aluminum MacBook 2.4 GHz with 4GB RAM.