My Blu Ray player will not play pictures from my USB a second time

I was able to play it no problem a first time, but when I went back a few minutes later to run through the pictures stored on the USB a second time, the screen goes blank, player says Stop, and I'm brought back to the home screen. 

Hi Rivyn,
Welcome to Sony Community!
It would be best if you provide us the model no. of your Blu-ray player, for us to give you an accurate solution.
Thanks!
Jerome

Similar Messages

  • PS3 (blu-ray player) will not play movie after menu selection on this particular project?

    When trying to play my finished Blu-ray disc on PS3 the menus display and work good. However, when I choose a selection to play the movie it returns back to the main menu. It doesn't matter if I choose the main play button or one of the chapters on the scene selection menu, it does not play the movie but rather returns to the main menu. Menus appear to be working fine!
    I've used Encore for years and I'm pretty familiar with the ins and outs of creating DVD's. I'm a little new at creating Blu-rays but have found the process very similar to creating DVDs with the addition of being able to add Popup menus. I pretty much followed the same process as a Blu-ray I created a couple months ago which worked fine. So I'm pretty much at a lose how to trouble shoot this issue. The only thing that has changed is that I've upgraded from Mavericks to Yosemite but I really don't know if that is a factor or not. Encore did not run into any issues while working on the project.
    Everything works when previewing my project in Encore. All the menus and buttons work and the movie plays fine. Also, no errors are reported after running the Check Project process on the Build tab.
    I usually create an ISO file to burn from later. Encore created the ISO file and reported success.
    I'm running Adobe CS6 on a Mac with Yosemite. FCPX was used to output the AC3 audio file and 264 video file. Menu transitions are ProRes422.
    So far while trouble shooting I've made 3 coasters.
    1st disc was created using Yosemite Disk Utility to burn the ISO file created by Encore (my usual way).
    2nd, and 3rd disc I let Encore burn directly from the project.
    3rd disk I removed the PopUp menu as I've only done one in the past and figured I would try that as a trouble shooting step.
    So, since everything appears fine Encore I'm really not sure how to trouble shoot this. I wish Apple would support Blu-ray better so I could just open the ISO file in DVD Player like I do when I create DVD ISOs. So much easier than having to trouble shoot by creating coasters.
    If anyone has come across this issue before and has any suggestions I would really appreciate it. I'd like to complete this project and move on.
    Thanks in advance!

    Well, at this point I'm thinking maybe something is wrong with the movie files output from FCPX even though they play fine in Encore. I noticed that there is a one frame difference between the video and audio file. The video file is 00:38:45:01 and the audio file is 00:38:45:02. I already output the file using Compressor. However, I'm still seeing the exact same time difference between the video and audio file when imported back into Encore. I'm going to rebuild the Encore project from scratch using the movie files output from Compressor and try again. If that doesn't work I'll use 7toX to convert FCPX XML and try importing the XML into Premier Pro and output the movie files that way for Encore. Or, output a master file from FCPX and let Encore do the transcoding.

  • HP HDX 16 Blu-Ray discs will not play!

    I have researched this Blu Ray issue for days without a real solution.  I am running Vista and notice many people feel upgrading to windows 7 was the issue, but I do not believe it is since I am still on Vista, with the same Blu-Ray disc issuey here.  Also I do not have Itunes another popular fix.  I did upgrade all the drivers I could and all the software I could from HP but did not resolve the issue.  I can play regular dvd discs but not the Blu-Ray ones with the exception of 1.  Surprisingly it is a newer one also.  Updating the Media Smart has also caused a problem with not being able to use the keyboard light at the top to open the dvd drive.  (one problem at a time though.) 
    The DVD Lightscribe drive shows as:  HL-DT-ST-BDDVDRW CT10L ATA Device
    After years of this issue being a problem does anyone have a real fix solution? Or  Does the Blu-Ray player need to be replaced and with what. 

    Try this document and also run this tool. 
    Fix problems with CD or DVD drives that can’t read or write media
    Your CD drive or DVD drive is missing or is not recognized by Windows or other programs
    THX

  • Flash player will not play flvs from folder with name containing non-Roman Chars

    We're trying to play flash as part of a program that can be installed to locations including non-Roman chars (European, Arabic, Chinese, etc.).  When the installation path includes any non Roman chars, video will not play.  The non-roman chars are garbled when Flash tries to load the flvs. Correct non-Roman chars are: ńśćłł.  When loading video it gets translated to: ńśćłł
    We've found this happens whether we are trying to access the video from the xulrunner app or by taking the activities out and running them within an html frame.
    Audio on the other hand is no problem
    The path information for the xulrunner app from Process monitor is:
    Video not found from the video player.
    10:41:25.3337898    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\video\VI-d9e37af511faa\Engplus1.flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, AllocationSize: n/a
    10:41:25.3339452    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\video\VI-d9e37af511faa\Engplus1.flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a
    Audio found.
    10:41:59.7659648    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\audio\AU-fa6ed5d31f577\LG0CD1Track06.mp3    SUCCESS    Offset: 0, Length: 4,096, Priority: Normal
    10:41:59.7660482    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\audio\AU-fa6ed5d31f577\LG0CD1Track06.mp3    SUCCESS    Offset: 4,096, Length: 4,096
    Video not found from a flash interactive
    10:43:50.0804572    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\video\video. flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, AllocationSize: n/a
    10:43:50.0806413    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\video\video. flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a
    Audio found from a flash interactive
    10:43:50.1928413    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\audio\journa list.mp3    SUCCESS    Offset: 0, Length: 4,096, Priority: Normal
    10:43:50.1929148    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\audio\journa list.mp3    SUCCESS    Offset: 0, Length: 25,206, I/O Flags: Non-cached, Paging I/O, Synchronous Paging I/O, Priority: Normal

    Not exactly sure what you are doing, but it is obvious that some part of the program you are running does not support multibyte characters like Unicode.
    If you are developing that application, make sure it is Unicode enabled.  If it is Flash (or Flash Player) that doesn't understand it, then you may not be able to do anything about it.
    What I would try if I were to encounter the situation, I would try to use the DOS (8.3) path names, like C:\Documents and Settings would normally be C:\DOCUME~1 or C:\Documents and Settings\All Users would be C:\DOCUME~1\ALLUSE~1 etc.
    Use the DIR /X command to find out what the DOS folder names are.

  • I have a 27"iMac running Snow Leopard 10.6.8. and Windows 7 on      parallels 6. My dvd player will not play DVDs. Has anybody else had this problem.

    My DVD player will not play any DVDs. Anybody else have this problem.

    This has been sorted.Got a new iMac 27" with Lion already installed and DVD player works. Thank you to all who replied.     Meloc

  • I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

    I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

    This could be several things, but let's get the obvious ones out of the way, first:
    1. Judging from your text, there's no problem with anything stuck in the mechanism; it's more an issue of no being to put in a disk. In other words, you're sure that there isn't a disk stuck in your MBP. (That happens a lot for all computers.)
    2. Go to Applications/Utilities/Disk Utility, and repair the disk. This should take under 10 minutes.
    3. Perform the procedure outlined here:
    http://forums.macrumors.com/showthread.php?
    4. After you're done, leave a message here as to the status of the repair.

  • MP3 Player will not play through Mic Jack - NB 550D

    Hi
    MP3 Player will not play through Mic Jack. Is this because I have not setup Realtek Audio Manager correctly?.
    Also is there any way to play the MP3 through a USB Port
    Thx

    Hi
    What notebook do you have?
    The mic jack records the audio signal. But I assume you want to use the mic jack an line-in. Right?
    Usually you have to set the default device in recording tab.
    In control panel -> sound -> recording tab.
    If you will not see any further devices but only mic jack then you should click right and should enable the options; show hidden devices and show disabled devices.
    Possibly then you could enable line in.
    Otherwise such option is not available and not possible

  • CD/ Blu-ray Drive Will Not Open/ Function Correctly

    My CD/ Blu-ray drive will not open. I can force it open with a paper clip and put in a disk that way but it does not activate and read the disk. The drive also does not appear as a file selection under my hard disk drives section of my computer.
    With this I am assuming my optical drive is broken so I tried looking for a replacement. I searched for the name of the optical drive in the HP PartSurfer and it says it is called SPS-DRV DVD SATA BD Combo 12.7. Just to be sure, is that the correct part I am looking for? If so, and say I were to go ahead and order this part, how do I go about removing the optical drive in my labtop and replacing it with the new drive?
    This question was solved.
    View Solution.

    Hi,
    Yes..that is the right part for your notebook.
    HP Pavilion dv6-3259wm Entertainment Notebook PC - (XZ087UA): 603678-001
    You can follow the instructions from the links below:
    Removing and Replacing the CD/DVD Drive
    Or, 
    HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • I upgraded to iOS 6.1.2 and now my iPad is sluggish and will not play music from iTunes

    Need assistance with recent upgrade.  I installed 6.1.2 and now my iPad is sluggish and will not play music from iTunes.

    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down until you see the Apple Logo.

  • My Macbook Air will not play music from the speakers

    My Macbook Air will not play music from the speakers and the institutions says that it can only play sound out of earphones.

    Is your account authorised on your Mac's iTunes ? If not then you can authorise it via the Store > Authorise This Computer menu option.
    If you are being repeatedly asked to authorise the account : iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - Apple Support

  • My iPad (4th gen) will not play sound from videos played via Facebook. Anybody have suggestions?

    My iPad (4th gen) will not play sound from videos played via Facebook. Anybody have suggestions?
    I've restarted my iPad, there are no available updates that I am aware of.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

    I have Imatch and songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

    By "hard reset" you mean hold down the Home and power buttons until the iOS device restarts, correct?

  • I canot change an .img (video) file to a .mov file. It ends in .img no other endings. It plays on my computer but not on my blue Ray player TV. It came from Finalcut Pro as a home movie. Any help?

    want to change .img to .mox or .avi but won't convert. It is a movie from Finalcut pro 10.1.3 as a home video. I am on IMAC 10.1.1 yosemity. I have tried 3 different video convcerters. It plays on my computer but not recognized by blue ray player on TV. - Roger

    Julie O wrote:
    I just purchased the MPEG2 component but it can't be installed on Yosemite using the installer. Do you have to manually drop it into a certain area folder?
    Have you followed the instructions on the Square5 website>MPEG Streamclip for Mac>Lion/Mountain Lion and MPEG2 Playback Component?
    Russ

  • Windows Media Player will not play embedded in Firefox

    I'm puzzled over the sudden inability to play embedded Windows Media Player files in Firefox. Everything was working fine, then suddenly yesterday with no changes made by me and no updates or other changes to the system I am aware of, suddenly it will not play.
    I can right click a link and save it, and it will play in the regular Media Player. However, when the content is embedded in a website, it loads the page and just sits there. Won't play.
    I'm using:
    Windows Vista Home Premium
    Windows Media Player v. 11.0.6002.18311
    Firefox 3.5.5
    I went to this page:
    http://forums.mozillazine.org/viewtopic.php?t=206213
    And when I type in about:plugins, I cannot see the DRM files. Am I supposed to? I tried using the Windows Media Player Plugin for Firefox (wmpfirefoxplugin) to repair it, but that hasn't helped.
    Any advice? Please keep in mind that I am practically retarded when it comes to tech stuff, and working several jobs and in school full time, so I really don't have the ability to spend hours and hours researching this. I need a concise, quick fix. Thanks!

    Why are you using such an old Firefox/3.5.3 version from 2009 (Gecko/20090824) as shown in the user agent and haven't updated Firefox for such a long time?
    See:
    *https://support.mozilla.org/kb/Finding+your+Firefox+version
    The Firefox 3.5.3 version that you currently run is no longer supported with security updates.
    You should at least use the latest Firefox 3.6.x version if you do not want to switch to Firefox 4+ versions.
    *https://support.mozilla.org/kb/Updating+Firefox
    Your plugins list in the system details list shows the WMP plugin (np-mswmp), so that plugin should be working.
    Do WMP test pages work?
    *http://kb.mozillazine.org/Testing_plugins
    See also:
    *https://support.mozilla.org/kb/Managing+file+types

  • TS1696 i burn cd on computer and auto cd player will not play it ????  ninadu

    i burn a cd on my microsoft 7 computer and then try to play in my auto cd player   IT WILL NOT PLAY??????   NINADU

    You did not say what programs you are using or how. Go to the web sites
    of the '''true owners''' of the video programs and get the full installer.
    Do the same for Firefox at '''''Mozilla.com'''''.

Maybe you are looking for