My bluetooth card is not showing

my bluetooth card is not showing and can not connect key pad and track pad

Finder > Finder Menu > Finder Preferences (these are not in System Preferences)
The General pane has checkboxes for various devices to show on the Desktop. A memory card is considered an external drive. If you want to see it on the Desktop when it mounts, check the external drives checkbox.

Similar Messages

  • My memory card is not showing up on the home screen when i plug it in but it shows the computer found it

    my memory card is not showing up on the home screen when i plug it in but it shows the computer found it in system preferences. when i plugged these into a imac back in school it showed up how come its not showing up on my less then 24hr old mac. sorry beginner mac user

    Finder > Finder Menu > Finder Preferences (these are not in System Preferences)
    The General pane has checkboxes for various devices to show on the Desktop. A memory card is considered an external drive. If you want to see it on the Desktop when it mounts, check the external drives checkbox.

  • Memory card files not showing up

    hi,
    i have a 6230 and i use pc suite, but in mobile phone browser my memory card does not show up. all the other files are there, and the memory card works fine in the phone.
    any ideas?

    Hi,
    If the above doesn't work, please find out what software version your phone has by typing *#0000# into the keypad. If it is an oldish one you might consider a SW upgrade.
    SR

  • Bluetooth menu icon not showing up

    I have always had the bluetooth status shown in menu bar turned on since I purchased my computer. Howeverm recently, the bluetooth icon does not show up after a restart, so i go to sys prefs>bluetooth, and it is ticked on. I have to uncheck and recheck the box and it will come back up. It will be fine until i restart again, and then the icon will be gone, and Ill have to redo the process. Anyone know how to fix this? thanks

    Try doing this, go to…
    /System/Library/CoreServices/Menu Extras
    … and then open the file "Bluetooth.menu".

  • What causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

    what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

    If the iPhone was unlocked unofficially, it has been locked to original carrier again.

  • Am I able to keep a balance on my account for buying songs? I just bought 15 songs and I thought it would come off my credit card on file. But my card did not show a purchase. Could I still have some money left from agift card? How do I view my balance?

    Am I able to keep a balance on my account for buying songs? I just bought 15 songs and I thought it would come off my credit card on file. But my card did not show a purchase. Could I still have some money left from a gift card or a deposit
    ? How do I view my balance?

    Your balance should show to the left of account id at the top of the iTunes store page on your computer's iTunes. You can also check it by clicking on that id, or doing Store > View My Account, which should show your account balance and let you view your payment info

  • Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

    This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
    This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
    GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
    This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
    If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
    Method 1:
    First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
    Hardware devices are not working or are not detected in Windows.
    http://support.microsoft.com/mats/hardware_device_problems/en-us
    Method 2:
    Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
    Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
    Press the Windows key + X
    Select Command Prompt (Admin)
    Type set devmgr_show_nonpresent_devices=1 and hit enter
    Type Start DEVMGMT.MSC and hit enter.
    Once in Device Manager hit the View menu and select show hidden devices.
    From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
    After you install the drivers, reboot and see if you get any different results.
    If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
    If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
    Method 3:
    If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

    This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
    This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
    GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
    This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
    If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
    Method 1:
    First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
    Hardware devices are not working or are not detected in Windows.
    http://support.microsoft.com/mats/hardware_device_problems/en-us
    Method 2:
    Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
    Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
    Press the Windows key + X
    Select Command Prompt (Admin)
    Type set devmgr_show_nonpresent_devices=1 and hit enter
    Type Start DEVMGMT.MSC and hit enter.
    Once in Device Manager hit the View menu and select show hidden devices.
    From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
    After you install the drivers, reboot and see if you get any different results.
    If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
    If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
    Method 3:
    If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

  • HT204053 2nd SD Card does not show up on desktop with out Restarting computer.

    I have iMac. I use 2 sets (A1-A2 and B1-B2) of dual SD cards for 2 videography cameras. A1 and A2 are identical. B1 and B2 are identical. Initally all SD cards showed up on desktop. They erased in Disk Utility when I'd downloaded the data. Then suddenly w/ no changes to computer or software, only 1 card would show up when I inserted it into the SD slot. If I insert 2nd card, nothing showed up on desktop, in finder or in disk utility. BUT, if I did a Restart, with the 2nd card in the slot, when the computer came back on, behold, there it was. I downloaded the contents, erased it in disk utility. I need to erase 4 32 Gb SD cards and erase them. I'm currently rebooting 3 times to accomplish this. It's a HUGE HUGE time sink to do this every time I want to download from cards. What's going on with the rebook solution? and how can I get back to better functioning? Solutions please. Thank you.

    Are you using the USB cable that came with the shuffle?  The 2nd gen shuffle uses the USB cable with a mini-dock at the shuffle end.  The USB cable for the 3rd and 4th (current) gen shuffle does not work, because the connector is different.
    If you are using the correct USB cable...  The shuffle will not continously appear on the Mac's desktop unless it is set to Enable disk use.  So "does not appear on desktop" may be OK.
    It should appear in iTunes.  The latest version of iTunes may hide the sidebar.  To show the sidebar, from the iTunes menu bar, under View, select Show Sidebar.  With the sidebar visible, the shuffle does not appear under DEVICES in the sidebar when connected?

  • Card Reader not showing up in Computer (PC - Vista) but does in LR 3

    I've been using Lightroom 3 for about a week and noticed last night that my card reader is no longer showing up in Computer (listing of internal & external drives) but I can find it in the Computer Management screen. I can access it through the Computer Management screen and it can be accessed through Lighroom. Has some default setting been changed and my card reader hijacked by Lightroom. Any help or ideas would by appreciated. It works fine one another computer (desktop with Lightroom 3 installed) but not on my laptop.
    I'm running it on a PC with Vista OS

    Try using System Restore to restore a previous restore point from before this became an issue.
    - Peter

  • Smart Card Reader not showing correct certificates?

    Running 10.5.6 with an SCR331, G4 desktop. I have been using entourage, smart card reader, and CAC successfully for quite some time.
    My CAC was recently updated with new certificates. When I insert my card reader with CAC into my machine, the keychain (and Entourage) show the old certificates which aren't even on my CAC anymore. Obviously I can't get Entourage (or other websites) to work without being able to access the new certs.
    I verified the CAC & reader were good by looking at it using a windows XP machine. The three new certificates were there.
    I also used another Mac (lap top) to verify the certs. I inserted my reader into the lap top, and the keychain on that machine displayed the correct certificates.
    I have tried several methods of rebuilding/replacing my keychain without success. Is there another token that needs to be cleared? Any help in letting access the new certificates would be very much appreciated.
    Thanks,
    Bob

    If you did what a lot of people did you put your certs locally and you do not need to do this. Delete them from your keychain and just in cert your CAC. Then create a "IDPref" for the DoD site you are trying to access and you should be good to go. If you need help, I have written a good "How-to" on my webblog. Just do a search for "safari and CAC".
    Jonathan
    <Edited by Host>

  • HT204088 a pre-order I made on my credit card is not showing on my account,or history of purchases. I recently changed my security details,could this be the reason? How can I talk to someone to check the issue out? thanks

    How can I speak to someone re a 'pre-order (CD)? I have checked the purchase history for my account,and it does not seem to be showing as ordered???
    Appreciate some help.Thanks

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    You can try contacting iTunes Support via this page (but if the purchases weren't done on your or your wife's account then they may not be able to help, you may have to go through your card's issuer) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • External SD Card Gallery Not Showing

    Hi,
    In Adobe Collage and the other Adobe apps on my Galaxy Note 10.1 I am unable to load my images that I have on my external sd card. Loading images from the inbuilt memory is fine however. I have too many images to start storing them all on the inbuilt memory so is there a way to get the external memory working. Most people I know with Android devices do it this way so I can't be the first to have this issue. The Android gallery app works fine as do all the other apps that use images on the tablet.
    EDIT: PS Touch does let you view the complete content of the sd card. Collage still doesn't, havent figured out a way yet.
    Any ideas?
    Cheers - Trev
    Message was edited by: trevburley

    Thanks David, I've found a different app that does collage now, was hoping there was a workaround since Photoshop Touch does support it (along with a few other Adobe apps) - I have no space on my internal memory thanks to Google Play Movies lack of supporting external memory as well, so I'm kinda stuck with an app I can't use.
    Cheers - Trev

  • Gift card credit not showing up

    I'm 100% positive that I had at least $20 of gift card credit on my itunes account, prior to adding and additional gift card of $25.  As I'm looking at my account, it doesn't seem I have any credit.  My recent purchase, in fact, came off my credit card rather than the balance of the gift cards.  HELP!

    Try signing out then back in to refresh your account info. If the store credits will still not update, best to contact support and have your account checked
    https://expresslane.apple.com/GetproductgroupList.action

  • SD CARD SLOT NOT SHOWING ON "safe to remove hardware" list ***NEWBIE**

    i have purchased my very first imac and i have installed windows 7 through bootcamp. the first problem i have encountered is that when i insert a sd card or a back up drive via the usb port i do not get the "safe to remove hardware" icon i normally get on my pc. i am able to eject the sd card via the computer option when i right click the sd card i get the eject option but i do not get the option when i right click the portable hard drive. i have tried the "rundll" option wia "cmd" the "safe to remove hardware" box appears but the sd card and the portable hard drive do not appear. its as if the computer is not aware of anything in the slots.
    when attaching multiple files in yahoo mail with a pc you just press the shift key does anyone know the equivilant for mac keyboard ?
    thanks in adavance for your help

    Hi,
    odd...
    If you open the Windows Explorer where are the SD-card and the USB-HD shown ?
    Are they shown in the 'removable' section ?
    Is thse USB-HD a 'Windows'-only HD or have you partitioned it to a Windows and a Mac OSX partition ?
    Have you tried a different USB-port on your iMac for connecting the HD ?
    What file system (FAT32 or NTFS) and what partition scheme (MBR or GPT) is used on the HD ?
    And on the SD-card as well ?
    As for the shift-key I don't that irregularity when using BootCamp Windows, but maybe that's because I still use WIndows XP with it.
    Might be a very far reached guess, but who knows...: try the key-combo 'fn+shift-key' to enable/disable the scroll-lock... (very far.... I know).
    Stefan

  • My sim card is not showing in my Iphone why

    My iphone is not using my sim

    I too am having similar issues and am very frustrated with this...it interferes with serious work I do with homeless teenagers to have a call dropped with a message that sim is undectectable and not be able to connect back with them. I'm going to address this to the media and see if they can shed some light if Apple chooses not to fix this problem.

Maybe you are looking for

  • Why does the FP 10 work with firefox but not with IE8

    I down loaded the folowing for xp FP uninstall, FP plugin and FP debug from the link in one of your replys. now I can watch youtube  with firefox but not with IE8. you asked me before if i was using 16 bit. whats that mean and how do I find out? plea

  • MacBook and iMac via AirPort Extreme?

    Hello. If I get a new MacBook, can I connect directly with my APE-ed iMac and a USB hard drive ected to it? Or do I need to go via an AirPort Extreme Base Station? Would an AirPort Express work as the base station? Thanks.

  • Impact Of Primary Key

    create table SEN_TEMP   E_NO   NUMBER not null,   E_NAME VARCHAR2(50),   E_TEAM VARCHAR2(50) insert into sen_temp (E_NO, E_NAME, E_TEAM) values (1, 'A1', 'T1') insert into sen_temp (E_NO, E_NAME, E_TEAM) values (2, 'A2', 'T2') insert into sen_temp (E

  • Increasing the speed of searching a string in a file

    I have to search a String in a big ASCII-file and have to delete it. Now I wrote a program which opens the source file and a target file. I am reading each line from the source file, check it and write it into the target file. It is working fine but

  • Oracle for personal use

    Hi I like to have a copy of oralce for personal use to run on Win XP with 128 RAM Could anyone help me where I can obtain a copy? Thanks in advance