My bluetooth earphones won't stay connected to my Apple Watch!

As you are reading this question, be sure to note the distinction between PAIR and CONNECT. They are not the same thing and in this question I use them according to their separate definitions/functions.
I have an Apple Watch and had no trouble pairing and connecting my first set of bluetooth headphones (Jabra Sport) to both my watch and my iPhone 6 (on iOS 8.3). Similarly, the iPhone and Apple Watch pair and connect just fine as well. I am returning the Jabra headphones because they fall out, so I did "Forget This Device" from both my phone and watch. I now want to pair my new Yurbuds earphones from Leap Wireless to both my phone and watch. I know that I cannot use the earphones with both devices simultaneously, but they should be able to remain paired and then I can choose at which time I want to connect to either device. After I got them both paired, I tried to play music from my Apple Watch (playlist stored on the watch) and it plays momentarily and then within seconds the volume scrolls all the way to zero by itself and then disconnects. I've tried starting this process with the bluetooth on my phone OFF and things run smoothly between earphones and watch, but as soon as I turn bluetooth on my phone back ON, the volume on the watch scrolls back down to zero and then disconnects again. I have tried this with my Apple Watch connected to the phone and not connected with the phone. It's almost as if the earphones see that the bluetooth on my phone is in the "on" position and they cancel out the connection to the watch. I've done this same process over and over again, even just turning the watch and headphones on and off again, re-pairing, "Forget This Device," basically trying to start from square one, but it's not stickign!
This didn't happen with the Jabra headphones. Both my phone and watch were paired to the headphones and I just connected to the one that I wanted to use at the time. So I know that what I'm asking is not impossible. It just isn't working and I can't figure out why!!

Hello:
Try resetting the PRAM and SMC.
Then delete a preference file (com.apple.bluetooth.plist) and restart.
Barry

Similar Messages

  • Bluetooth Headset won't stay connected under 10.6

    My PS3 headset use to stay connected under leopard but something in snow leopard doesnt like it. If I can get it connected it'll stay connected for a min. And i cant get the input meter to pickup any audio from the device. However on my iPhone and PS# it works flawlessly. I've tried re-parring it and making sure all my other bluetooth items are off but it still does the same. Any suggestions?

    Ugh, NO ONE?  This is absolutely stupid.

  • My bluetooth keyboard won't stay connected. I have to hold the power button to type

    wireless keyboard says connected then connection lost. All I did was replace the batteries when the old ones died. Now I have to hold the power button just to type. Seems like a hardware problem not preferences. Any clues?

    Hello:
    Try resetting the PRAM and SMC.
    Then delete a preference file (com.apple.bluetooth.plist) and restart.
    Barry

  • I just recently purchase an ipad with retina display it is also my first apply product and I am not liking it. First it won't stay connected to my wifi and it won't pair on my nokia N8 phone via bluetooth. Any suggestion? Thanks!

    I just recently purchase an ipad with retina display it is also my first apply product and I am not liking it. First it won't stay connected to my wifi and it won't pair on my nokia N8 phone via bluetooth. Any suggestion? Thanks!

    No one from Apple here - this is a user-to-user forum for the Apple Thunderbolt Display. If you don't like your iPad, sell it.
    If you want to ask questions about your iPad, go to the iPad community forum.
    Clinton

  • IPHONE 3G Won't stay connected to bluetooth hands free on car hifi

    Hello,
    I have just switched to the iphone 3G from my Nokia 8800 and the iphone 3G won't stay connected to my Pioneer head unit! It connects OK manually but the "AUTO" connection function on the Pioneer does not work with the Iphone, But it does work with the Nokia OK!!
    So everytime i come back to the car it doesn't work till i go through the whole connection 5 minute procedure again!
    Have factory reset the pioneer but no cigar.
    Any suggestions?
    Thanks, Chris

    I would try a reset or a restore first. Also, chances are that you paid for your phone using a credit card. Most credit cards give buyer an extra year of warranty protection. If you paid with a credit card and the purchase date is less than two years, call your credit card company and ask if they can pay for the repair.

  • Preferred wifi network won't stay connected

    Hi,
    I have a 2010 macbook and since updating to Yosemite 10.10.2 the connection to my wifi won't stay connected - tends to last only 3/4 minutes before I have to manually reselect the network. It immediately reconnects without me having to retype the wifi password and the network is the only one in my preferred networks. There were no problems previously and the signal is consistent when other people connect laptops and iPads and I have my iPhone connected to it.
    I have had a look at the standard apple troubleshooting guide for network issues but it's pretty useless as it seems to assume that the problem is with the router or with the network provider.
    Any advice would be greatly appreciated,
    cheers
    Ollie

    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite (2)
    Wi-Fi Problems in OS X Yosemite (3)
    Wireless Diagnostics
    Also try turning off Bluetooth.

  • IPhone won't stay connected to Wifi. Switches back to 3G

    When trying to download apps over 20mb. My iPhone won't stay connected to my wifi it will switch when I connect to the apps store. I had a iPhone 3G now I have a iPhone 4 and both phones did this. Someone please help.

    Hi Asdghyvbji!
    I have an article for you that should be able to help you troubleshoot this issue:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    You may also need to see this article about wireless interference for further troubleshooting on this issue:
    Wi-Fi and Bluetooth: Potential sources of wireless interference
    http://support.apple.com/kb/ht1365
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • TS1398 My iPhone won't stay connected to my wireless. I have to keep repowering my phone and then it lasts for a few minutes until I have to reboot again. Any ideas? Anyone experienced the same?

    My iPhone won't stay connected to my wireless. I have to keep repowering my phone and then it lasts for a few minutes until I have to reboot again. Any ideas? Anyone experienced the same?

    HI:
    It does not sound like a battery problem.
    Try a couple of things:
    1.          Reset the SMC
    http://support.apple.com/kb/HT3964
    2.          Reset (if you can) the PRAM
    http://support.apple.com/kb/PH4405
    If that does not help, delete the mouse in system preferences, turn it off, restart, and turn the mouse back on.
    Barry
    P.S.  I only needed it once, but I have an old USB mouse in case my Bluetooth one decides to quit. 

  • IPhone 5 won't stay connected to wifi for a long period of time?

    iPhone 5 won't stay connected to wifi for a long period of time?

    Hi Asdghyvbji!
    I have an article for you that should be able to help you troubleshoot this issue:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    You may also need to see this article about wireless interference for further troubleshooting on this issue:
    Wi-Fi and Bluetooth: Potential sources of wireless interference
    http://support.apple.com/kb/ht1365
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • I updated my iPhone 5 software and now it won't stay connected to wi-fi

    I updated my iPhone 5 software and now it won't stay connected to wi-fi

    Icloud uses you Apple ID. It one of the Key feature on the new ATV. Restart the ATV, if that doesn't work unplug it and restart it. It should resolve the issue

  • Apple Time Capsule Won't Stay Connected

    After Verizon upgraded my router to the 9100EM my Apple Time Capsule Connects to the router but won't stay connected all the time. I have to go into router management console a couple of times a day and reboot it the restore connection. Time Capsule is connected to router by lan cable into port 1 of router. Time capsule set in bridge mode I believe. Just from time to time when I run Air Port Utility Time Capsule has green light but internet goes orange once i reboot I'm good for several hours then loses connection and have to reboot again. Tried looking for other settings to adjust but haven't found anything to help. If any body has any suggestions please help, it just gets old having to reset all the time

    If you are using a Mac, which OS is installed?  
    Use Software Update to make sure you have all the latest updates.
    Repair permissions.
    Change your router (Airport) channel.  Most times this all you have to do!

  • My iMac won't stay connected to the internet, even though all other computers in my house stay connected

    My iMac won't stay connected to the internet, even though all other computers in my house stay connected, and its connection is set up the same way my fiance's macbook is (his macbook is about three years older than my iMac). Every time my computer goes into sleep mode and I come back (even if it's mere seconds after giving the black screen) I have no internet connection. I discovered a workaround for it some time ago, but now that is working less and less, and now my computer randomly disconnects WHILE I'm actively using the internet. Just a few minutes ago, the connection refused to come back until I restarted my computer, even though once again all other computers in the house were connected. The workaround I discovered before and which doesn't work as reliably now, is to click opne Airport at the top right of the screen, click "Open Network Preferences," then click "Assist me," then click "Diagnostics," and wait for everything to turn green again, signalling a connection.

    Let's check the quality of your connection since signal strength alone does not insure a good connection. The "bars" that you see at the top of the iMac screen are there pretty much for show.
    Hold down the option key on the iMac while you click on the Apple icon at the upper left corner of your screen and select System Profiler
    Look down the list of items at the left of the window until you find the setting for Network, then click on AirPort.
    In the window to the right, look for any listings of your wireless network name. You may possibly see two listings for the wireless network name.
    We need for you to list the information that you see for Signal / Noise.  These will be negative numbers. Post back with your findings and we will continue.
    In the meantime, please move any cordless phones that you have or any other electronic devices that are near the iMac as far away as possible from the iMac.
    If the iMac is located in a corner or an enclosed area, give it as much room as possible since the wireless antenna is on the back of the iMac and it needs to be able to "see" the room.
    Anything that you can do to minimize the number of obstructions like walls or furniture etc between the iMac and the wireless router will help the cause as well.

  • Won't stay connected to network

    Not sure if this is a Safari problem or internal with my Mac somehow. I have a G5 and I connect to a router for wireless internet. I also connect to my printer through the same router.
    I've noticed sometimes when I exit safari and then come back to the computer later and click the Safari Icon it sometimes doesn't connect to the internet without me having to go through a "Network Diagnostic" test. Then usually what happens is about half way through the diagnostics my internet home page will load, or I'll get to the end of the diagnostic and it says "your connection is working" and then the home page will appear.
    The problem I have now is that my computer won't stay connected to my printer. If I try to print a document or photo it does not send it to the printer, however if I turn Safari on so I know I'm connected to the network then all of a sudden the printer will work.
    I guess somehow my computer is automatically disconnecting from my network and I'm not sure why or how to fix it. I've gone into the network preferences an it always shows "airport" is on and I always show all "solid" in the little icon at the top that looks like a "fan".
    Any thoughts here on why my comp doesn't seem to stay connected to the network?
    Thank you.

    HI,
    Try updating your system software to 10.5.8 with the combo update available here.
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    After the installation, repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • Won't stay connected since upgrade

    Hey gang,
    Got a brand new iTouch last weekend and upgraded the SW to v3.1.2(7D11). Ever since then, it won't stay connected to my wireless at home once it's turned off. Turn it back on and enter in the passphrase and all is good. At work it seems to be fine. Not sure what to look for.
    Thanks in advance
    Toy4rick

    Well, it looks like it's being caused by SSID not being broadcast. As long as I have it broadcasting, all is well, as soon as I disable this, it won't connect after a restart.
    This is my second iTouch, the first one had a bunch of dust appear under the glass and the Apple store replaced it no qualms, couldn't be happier My first iTouch didn't act this way and was running the previous version of software. It wasn't until i got a new unit and updated to this version that the issue started.
    I have 2 other iTouch's in the home with the older software and they don't have any issues with SSID not being broadcasted.
    Any additional thoughts?
    Toy4Rick

  • AirPort WiFi on 2010 MBA won't stay connected to 5Ghz band since latest 10.6.7 update.

    I updated my 2010 MBA 11" to the latest/greatest of everything in prep for Lion. So, I now have 10.6.7 of course. But ever since the updates, I noticed that my wifi on the MBA won't stay connected to the 5 Ghz band of my router. It'll connect fine to the 2.4 Ghz channel, so its not a big deal, but this is my first weird issue with the Mac (I converted in January), so of course it bugs me.
    Anybody else having the same issue? Since Lion is around the corner, I can get by using the 2.4 band and hope its not an issue in Lion. But part of me wants to try to use my TIme Machine backup right before I updated to see if it is truly related to the updates.
    Thanks!
    John

    Forgot to mention, I have a Netgear WNDR3400 N600 Dual Band Wireless Router. But like I mentioned, it has worked perfectly for 5 months previously.

Maybe you are looking for