My bluetooth magic mouse and trackpad suddenly quit working. This has been going on for a month or more. Eventually continual
I have a Bluetooth Mac keyboard, trackpad and magic mouse. They fail regularly and only a series of resets eventually cures the problem. I have switched to a USB mouse, but that eventually fails too. 2011 mini, all current software. Mouse still moves cursor, but no left click. Trackpad loses click ability. Repeated shutdowns. Something is very wrong.
If even the USB mouse is failing, that's interesting. Make sure you remove the batts from any nearby BT mice, and reboot the system. USB mouse should work fine, if it's still not clicking, something needs to be probably changed in the system preferences.
Try these:
Reset your computer's PRAM
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Mac OS X: Starting up in Safe Mode
http://support.apple.com/kb/HT1455
Similar Messages
-
It will not connect but my other apple devices can connect and the wifi works very well. I have moved houses to my house wifi isnt the same as the old one. Also, i have to type in the password every time even if i click autosave. Sometimes it also says invalid password or connection timeout. This has been going on for two months and is getting really annoying. I've tried most of the solutions listed on other discussions, none of them work. Any other tips? Thank you. Ps i've had this macbook for 3+ years
Two questions:
1. Your profile says OS 9.2.x. Is that correct?
2. Impossible to provide "other" tips without knowing what you have aleady tried. What have you tried? -
Help my ipad will not stay connected to wifi for over a month! any suggestions?
try updating the firmware of your router to the latest
-
I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.
I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.
-
When I click on Firefox Icon to open browser a window opens that says..Firefox has had a problem and has crashed.It says a report will be sent to Mozilla and problem will be fixed when Firefox is closed,(It never opened),I click on close Firefox and it says a report is being sent.Then a few seconds later it says...Report successfully sent and closes.It also asked if I want Mozilla to contact me about this report,I checked yes and have recieved nothing.I WANT MY FIREFOX..This has been going on for since Nov.30th.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
* https://support.mozilla.com/en-US/kb/latest-firefox-issues
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
* https://support.mozilla.com/kb/Mozilla+Crash+Reporter
* https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report
<br>
Firefox 8
* getfirefox.com -
Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.
Contact facebook to address the facebook issues.
-
When I try to update my macbook air to the new OS X Maverick it say unknown error and to please try again later. This has been going on for a few days and was hoping someone can help. Thanks.
After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed. -
When I repair disk permissions using Disk Utility and it says it's completed the task, I click on it again and it repairs more. This has been going on for hours now. Could there be that many wrong permissions? Should it get to "all repaired" eventually?
It's normal behavior. You don't have to worry about. Most of what's listed is just a report of what the utility finds., not necessarily that there is omething wrong.
If you want to find out more, read the link below, or see the More Like This links on this page.
http://support.apple.com/kb/TS1448?viewlocale=en_US -
How I got the Bluetooth Magic mouse and Aluminum keyboard to work in XP
NOTE: The following steps fixed my issue. I thought I would share what worked for me but I really don't ever visit these discussion groups. I used a combination of Sysinternal tools to isolate what was causing my issue and rectified it.
I couldn't for the life of me get the bluetooth magic mouse and keyboard working in a bootcamp'd windows xp. Here are the steps that I performed to finally get it to work. The assumptions are that you are running a clean XP build with SP3 and all windows updates installed.
1. Using a USB mouse and keyboard. Insert the OS X install disc into the drive and run through the bootcamp drivers install. (These steps are outlined at Page 12 in the Apple Boot Camp Installation Guide: http://manuals.info.apple.com/en/bootcampinstall-setup.pdf). Let the installers run per apple instructions in the bootcamp installation guide. At the end it will want to reboot. Reboot the system.
2. After the system reboots login and run the Apple Software Update utility to update from bootcamp 3.1 to 3.2. It will run through a bunch of installers and ask to reboot at the end. Reboot.
3. After the system reboots login and go to start=>run and type "services.msc" to bring up the services control panel.
4. Double-click the "Bluetooth Support Service" to open the properties.
5. Go to the "log on" tab and look to see what is set. If it is set to "NT Authority\LocalService" then click above it to change to "Local System account." Then click "OK." It will tell you the changes won't take effect until the service is restarted. No worries.
6. You will be back in the main services control panel. Make sure the "Bluetooth Support Service" is highlighted and look up to the left and select "restart the service."
7. Close all the open windows and then go to start=>run and type "control panel" and hit enter.
8. Double-click the "Bluetooth devices" control panel applet and follow the Apple instructions provided on Page 18 of the guide referred to earlier. Start with the mouse first. Stop when done with the mouse and don't continue on to the keyboard yet.
9. At this point my mouse was "installed" but did not show "connected" in the bluetooth devices applet. I then highlighted the mouse and clicked the "properties" button down to the right.
10. Once in the properties of the mouse I selected the "services" tab. My issue before making the switch to "Local System" account for the Bluetooth services was then when I tried to click the check box to enable "Drivers for keyboard, mice, etc (HID)" I would get an "access denied" error. Now that the switch has been made you should be able to click that check box without error. Click OK after enabling.
11. You will suddenly see systray (lower right of the screen where the clock is) saying that new hardware has been detected and enabled. Once this is all done you will see "connected" below the device in the Bluetooth applet. Give your mouse a go. It should be working now. Sweet!
12. Follow the steps in the Apple guide for your keyboard. This should work too now. Sweet!
Best of luck.It depends on how far it is and how thick your walls are. If there plasterboard partitions and only 10 feet apart then probably.
If you have a mobile phone with bluetooth, then try sending the computer a picture of file from similar distances to that you intend using the keyboard, if it works then a bluetooth keyboard and mouse should. -
In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?
Have you turned the iPad off then back on? That often helps with problems.
-
I have set up Iphone4s with my pc and ticked only required songs to sync. I clicked apply and it has been going for over 12 hours on my Iphone just displayimg loading. The capacity on my iphone shows a capacity of 6.3gb used out of 13.6 Am i doing something wrong ?
Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
What is using data, unsolicited, every 6 hours?
Why does it change?
Why does it only happen on the iPhone 5 series and not the 4?
Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ... -
Every time iTunes comes up on my computer it quits within a few seconds and the message reads," iTunes quit unexpectedly. They problem has been reported to apple. But it's been like this for weeks.
Is this AppleCare you are calling? If it is, you need to call back. They are there to help you with technical issues, specifically ones with your computer. Or, are you emailing iTunes customer service?
-
I had to stop downloading a movie that I rented , not quite finished. When I tried to start the download again the message says waiting........but this has gone on for days. I want to finish and watch my movie. How do I restart the download or get a refund and start over?
Hello Wearekozy,
The following article outlines how to report an issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Thanks,
Matt M. -
My IPad keeps quitting on me. THIs has been going on for three weeks it's two years old
My IPad keeps quitting
Hello mae rostock,
I would be concerned too if my iPad was unexpectedly powering off. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below (these steps refer to an iPhone, but the steps also are relevant for an iPad):
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Anyone find a fix for this? Most programs installed invoke this error.
The system extension “/System/Library/Extensions/ZD1211Mac.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.That driver appears to be for a Zydas wireless usb adapter. Zydas has been through a couple of different acquisitions and no updates appear to be available, so you'll probably need to delete that extension.
Regards.
Maybe you are looking for
-
Hello, I got mistake in ODS manage like this: The time stamp in the source system is 24.09.2007 The time stamp in the BW is 23.05.2009. I have problem to load data in ODS. What should I do ?? Replicate the data source ? But then it's possible to get
-
Pass parameter between programs
Hi, I need to pass one parameter between 3 programs : That is the actual flow of my parameter. SAPF110V -> RFFOBE_I -> which include ZRFFORI99B) get param <- RFFOBE_I <- set param with statments SET PARAMETER ID 'ZDBL' FIELD p_doublon. GET paramete
-
Would it be possible to have provided BIOS V4.7 to use with the forum's USB flash method? Thanks!
-
Hi, I could not understand about the data flowing from 1. Cash Journal to Manual Bank Statement 2. Check Deposit to Manual Bank Statement Becuase both are related to Bank Accounting. It is urgent, How can i get the data relating to this like Process
-
M Ipad mini is frozen and holding the home and lock button do not fix it. Also not able to connect with itunes to restore it as the message indicates the ipad is lock but it's really frozen. It will not respond to anything-help