My bluetooth on r007 tx is not working

please help me out my bluetooth is no functioning it doest show bluetooth icon in control panel also

Welcome to the HP Forums!
It is a wonderful place to find answers and ideas!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are unable to use your Bluetooth but you have a Bluetooth icon.
What happens when you try to pair your Bluetooth, do you get an error, or does it not find the device?
As the HP r007tx came with Free Dos installed, what Operating System are you running?
Are all the drivers up to date?
Here is a link to the software and drivers for your notebook. You will need to select your Operating System and follow the prompts to display the list of drivers. Please manually verify that everything is up to date.
In the meantime if you are running Windows you can try these steps.
Step 1. Go to device manager
Step 2. Right click on "Bluetooth Peripheral Device" that you want
Step 3. Select "Update Driver Software..."
Step 4. Choose "Browse my computer for driver software"
Step 5. Choose "Let me pick from a list of device drivers on my computer"
Step 6. Select "Ports (COM & LPT)"
Step 7. Select "Microsoft" at "Manufacturer" list
Step 8. Finally select "Standard Serial over Bluetooth link"
If you are still unable to pair with a Bluetooth device try the following:
Step 1. Search for "Change device" in the Windows 8 Start menu.
Step 2. Click on where it says Change device installation settings.
Step 3. Select the No, let me choose what to do option.
Step 4. Check the automatically get the device app option
Step 5. Click Save changes to save the settings you just chose
As well you can try this
Step 1: Go to RUN (Windows Logo + R) and type “services.msc” and Enter ( Windows ,7 go to start/ run and then type "services.msc")
Step 2: Now find “Bluetooth Support Service” and double click on it
Step 3: Now click on Log On Tab and Type in "Local Service" without quotes
Step 4. Click on “This Account”
Step 5: Now remove any passwords leave the password field blank
Step 6: Underneath the upper left title should be a hyperlink "Start" Click it
You can also check the Power Management tab and unchecked the box that says "Allow the computer to turn off this device to save power."
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!.

Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!

iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
Computers are not airplay compatible unless you have downloaded an app to make them so.
User to user forum, so I don't care if you switch to android or any other threats you make.

Send to bluetooth right click option DOES NOT WORK

hi guys can you help me send to bluetooth right click option does not work!when i am going to send something it says windows cannot access the specified device,path or file you may not have the appropriate permissions to access the item please help me!i
have windows 8

this is how we send file using Bluetooth
http://superuser.com/questions/540498/open-bluetooth-file-transfer-wizard-in-windows-8
Did you pair this 2 device before?
May I know the destination device? its comes with WIFI?
tips: rather than Bluetooth, I suggest you using file sharing with WIFI, its more faster

My bluetooth on my computer will not work. I have checked 'ON' and DISCOVERABLE in system preferences. I have restarted the computer.

My bluetooth on my computer will not work. I have checked 'ON' and DISCOVERABLE in system preferences. I have restarted the computer.

Since you can get them working, at least temporarily, make those Favorites. If that doesn't help, then go into your home folder library and move the following to the Trash (but don't empty the Trash--if this doesn't help, you can always use File>Put Back to restore it to its original location.)
In ByHost
com.apple.Bluetooth.<long string of characters and numbers>.plist
If you do this, you will need to reconfigure your Bluetooth settings. Might take screen shots of them first (Cmd-Shift-4) Setting up Bluetooth again will create a brand new preference file.
EDIT: That's in your home folder library>Preferences.

Bluetooth on iPhone 6 does not work with car stereo

I have used iPhone 4, 4S, 5 and 5S on my car - my own and my families phones. They all work as intended with regard to music and most importantly telephony. My car (FORD S-MAX) has buttons etc. for phone navigation. My daughters and wifes 5S's still work.
When I paired my new iPhone 6, the pairing itself was successful, but it does not work at all.
1) Incoming calls show my own telephone number, regardless of who calls
2) I cannot use the car buttons for anything, neither pickup, hangup or anything else
3) Regardless of what I do, the Podcast starts playing, if I choose Bluetooth as sound input on car. If I click pause on Podcast, it resumes after a while, sometimes immediately.
4) If I use the phone to dial a number, the sound is not in the car, even if sound source is Bluetooth/Car. If I select something else and back to car, the sound is in the car.
Hopefully this is soon to be solved! Or is there already a solution out there?
Best regards
Matt, Denmark

My iPhone 6 pairs just fine with my 07 Z4 ,no idrive etc just the basic B/T install on a Business standard radio set up with e snap in connector for the iPhone
but not yet an iPhone 6 snap in
You may need to ensure you clear all ol pairings from Beemer they have a limited number of pairings that can be stored at one time
To dispel all the bad press my 6 also happily paired with my '13 X1 without any issues and with the correct snap in also plays audio
The issue is usually with iDrive which BMW do have some issues with

Ios7.0.1 bluetooth connectivty with car stereo not working properly?

I have updated my Iphone to Ios7.0.1 Before this update connection between my Iphone and car stereo was not an issue.
Now the only way to play music through this device is to use the iphone. Select track, volume, Etc the hands free buttons on the sterring wheel do not work. I think you will agree this is not acceptable, convenient , or safe to drive. However the phone call option is working perfectly as before. My vehicle is a 6 month old Jaguar XF I have contacted them and they have inspected my car and have assured me the problem is not with my car audio equipment.
I am a little reticent to do a factory reset on my iphone until all avenues of trouble shooting have been exhausted.
Can anyone help, advise, or even been experiencing the same problem/

I have a similar problem with my XF. I upgraded to 7.0.2 and deleted all my paired devices in the car and on my phone.
I reapired the phone and all seemed fine - I could happily make/receive calls. However the phone will NOT connect to the audio part of the XF and will not play any music or connect via Bluetooth to Audio. I can see the phone and try and connect but I get the message that the Audio connection has failed. The phone continues to work normally through the phone setup.
Previously you could effectively connect a device as a phone and a device as an audio device (or the same device to both phone and audio) but this is no longer possible with IOS7 it seems. My wife and my son also have iphones upgraded to IOS7 and they cannot connect to audio either.
I have tried rebooted, resetting, deleting all settings etc, etc but I am having no luck.
ANy further help greatfully received. My XF is a 63 plate and just over a month old.

Bluetooth, iSight and Keyboard Backlight not working. Please help!

My Bluetooth stopped working along with my iSight and Keyboard Backlight. I first noticed the weird sign over the bluetooth icon, and it read "Bluetooth not available". I payed no attention to it for a while until I tried to take a picture with Photo Booth and I read "No camera found", for some reason I tried to dim the backlight on the keyboard and a blocked sign appeared under the brightness level, not letting me do anything (Later I was able to use the backlight with the LabTick app). I have tried everything. SMC, PRAM, NVRAM, logging as diferent and new users, booting in safe mode... every solution I have found on the internet has been tested by me. Then I read this about the Hardware Test solution, and surprisingly after performing the Hardware Test no problems were found! So basically my MacBook Pro (mid 2010) is not having any trouble of any sorts with anything. Then why can't I use Bluetooth, iSight or Key backlighting (which only works through LabTick). Given the fact that the hardware test shows no problems I am not comfortable with the idea of taking it to repair. There MUST be something I can actually do to fix these issues.
Does anybody have any idea? I repeat, these are NOT WORKING, NOT FOUND AND NOT AVAILABLE.
- Keyboard Backlight (Only works through LabTick)
- iSight Camera (Not found by any software)
- Bluetooth (No info appears on the system profile, the icon on the menu bar is completely gone)
All three issues happened at the same time, the night before everything was working perfectly fine.
If anyone could help... please!!!
Summary:
MacBook Pro Mid 2010 (http://support.apple.com/kb/SP583) Unibody, can't take out the battery.
Solutions tried:
- Reset SMC: Turning on while holding Shift + Ctrl + Option + Power Button (This makes my MacBook forget about the battery and start up with really loud fan noise, battery icon appears with an X on it, keyboard backlight buttons work, they show brightness level on screen, but the actual light won't work, no bluetooth, no isight)
-Reset PRAM and NVRAM: Turning on while holding Option + CMD + R + P (I have waited for 2 chimes, 3 chimes and 4 chimes at different times, nothing happens. Light, bluetooth and isight are still gone)
-Holding Power Button for 10 seconds, 20 seconds, longer... nothing changes.
-Creating and logging in as new admin user, nothing changes.
-Deleting the bluetooth.plist file and powering off and on again, also rebooting
-Deleting the SystemConfiguration folder, powering off and on again, also rebooting
-Installing "blueutil", didn't help at all, turned it off via terminal with command blueutil off.
-Performing Apple Hardware Test - Shows no erros or problems on any area after one full hour of testing (Performed the extended testing)
-Leaving it powered off overnight
Please anyone help meee!! I can't afford going crazy!
Thank you so much in advance!
Alvarock.

****UPDATE***
Hi guys i got across this forum after searching for bluetooth, front camera and the most ANNOYING no lost keyboard backligth.
After run all the test, procedures, tweeks and, and everything i remenbered that once i sent my MBP to repair at you bring i break, turns out that the little ribbon flex connector coming from the mother board ( from the rigth to left) was loose since the adhesive wich they used shrink do temp changes, anyhow y popped out the glas and found the flex cable totally sticked to the glass pulling out of the pcb board connector, reinstalled it smoothly and that FIXED the camera, bluetooth and keyboard backlight!..
thats it. hope i helped some frustraded owner.

Bluetooth + Nokia N73.. Not Working for me!!

I just installed Leopard on my Mac Pro. I am using a MSI Starkey3 bluetooth dongle. This USB dongle works fine in Tiger, but not in Leopard.
So far, I can pair my Motorola V3 and use it with the bluetooth connection (explorer content et iSync are working fine)... but I cannot do the same with my Nokia N73.
When I try to pair my Nokia N73 in Leopard, it does not continue after the "security" code... my Mac is still trying to connect to my Nokia N73... I have to stop bluetooth wizard.
I tried the same setup on a brand new iMac with Leopard installed... same problem... my Motorola V3 is working fine with bluetooth, but not my Nokia N73.
It seems to be a new bug with Leopard, unless someone has a solution to this problem...
Can anyone confirm the same problem on their Macs?

it's much better to search first, this message contains the same problemen and more info:
http://discussions.apple.com/thread.jspa?messageID=5647902&#5647902

Bluetooth headset's mic does not work

I have NB205-312BL netbook and bought Acoustic Research ARWH1 bluetooth headset.
I am able to pair it with the netbook easily. However, the mic does not work! Only audio playback works. I know it is not the fault of the headset because the mic works pretty well with a cell phone.
When I look at Device's properties, I see that the device is identified as a 'headset' but an audio-sink device.
The mic does not work even if I explicitly select "Bluetooth Wave" as the sound/voice input device.
The netbook runs Windows XP. It has the latest Toshiba Bluetooth software 6.40.xx installed on it.
Any help is greatly appreciated. Thanks.

First you need to get your keyboard fixed. The caps lock appears to be stuck.
What have you tried, and what symptoms do you observe? "Does not work" does not tell us much.

Bluetooth Mouse and Thinkpad T520 not working together at all

Hi All (first post),
System:
Lenovo T520
Windows 7
Microsoft Bluetooth mouse
Problem: Not working at all, or working only sporadically.
History: Laptop is a bit over year old (warranty ends in June 2015 IIRC). The sales clerk recommended a bluetooth mouse, so I bought a Microsoft Bluetooth 5000. After the initial pairing difficulties were resolved, they worked swimmingly for about a year. Then I started more and more frequently having to re-pair them (remove device, let Windows find it again, pair them,...). As the mouse had taken a bit of beating, I bought another one a week ago. Didn't really help. The first time I asked Win7 to find the device, it couldn't. The Bluetooth radio was on, and the mouse had a fresh set of batteries, and all the other braindead suggestions of Win7 were eliminated. The bluetooth radio was working, because it detected the neighbors daughter's smartphone through a concrete wall, but not the mouse. I kept pressing the button in the bottom of the mouse that presumably makes it broadcast "I'm here".
I moved to another room. This time detection and pairing up the device went fine. But after I had switched the laptop and the mouse off, and rebooted - nothing happened. I had to go through the remove/add device cycle again. Moving to a different room again. At first nothing. Then Windows finds the device, but gives the error code 0x800070015 (or something like that, not sure about the number of zeros), and fails to configure it.
Any idea what is going on? Why is this becoming progressively worse?
Elsewhere in this forum it was suggested that I should disallow windows to power off USB root hubs. I tried that but it had no effect.
Regards,
Jyrki

Sorry. The error code was 0x80004005. This is the code I get from Add Device ->, when I try to enter 0000 as the paring code (suggested by the mouse start guide. If I try to pari them without a code, Control Panel first indicates that the piece of Hardware was added ok, but it before I get any use out of the mouse, the freshly added pic of the mouse disappears. The red/green light on the mouse never stops blinking.

Bluetooth Mighty Mouse and Keyboard not working in Win XP!

Hi All,
I simply cannot get my Bluetooth Mighty Mouse and Keyboard to work in Win XP via Bootcamp! The bluetooth icon appears in the tray and even shows that they are connected but they do nothing at all. One thing to note is that they show up as connected but with no password. Could this be the problem? If I reconnected the two with new passcodes for XP, would they still work when I reboot in OSX?

upgrading to vista sorted things out!

Bluetooth dongle for apple trackpad not working..?

Hi, I recently got this for my macpro desktop 10.6.8 without built in bluetooth :
http://www.ebay.co.uk/itm/400052901851?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1 497.l2649
Can't seem to get it working with my Apple trackpad, not sure if it's the trackpad or the bluetooth in general.
Anyone got any tips on setting it up please? Tried all the usual setup mentions. I get this message in the network menu:
Many Thanks
Jon

Ah ok, yeah removed the network settings.
Still not working. I've got fresh batteries in it. Pairing light is flashing on trackpad.
but im getting these screens:
Thanks
Jon

VN7-791G all bluetooth devices like Logitech mouse not working after Windows 10 upgrade

After upgrading to Windows 10 on my 2 month old Acer VN7-791G, my Logitech bluetooth mouse could not pair, my bluetooth speakers could not pair and neither could by Nexus 7. All these devices were working fine on Win 8.1 earlier. Under Device Manager, only the generic Windows Bluetooth, Microsoft Bluetooth Enumerator and LE Enumerator drivers were showing (dated 21/6/2006). Under Network adapters, the driver showing was the Qualcomm Atheros QCA64x4 ver 10.0.0.62 dated 18/5/2015. I checked that this model is indeed compatible under ACER's website for Windows 10. I have also been checking the ACER drivers for Win 10 for this model but there are no new updated ones for Bluetooth. I downloaded the Win 8.1 ones and installed them but they still would not work (the Microsoft ones are still showing under Device Manager). I had to actually downgrade back to 8.1 a few days ago due to this issue but thought I would try to update to Windows 10 again hoping it would work but still no luck. I had googled but can't seem to find a solution and suspect that I need an updated bluetooth driver for Windows 10 from Acer or Broadcom. The Atheros website do not have any Windows 10 bluetooth drivers as well. I may have to downgrade again and try again in a few months time unless someone could please point me in the right direction. Thank you.

Yay! Success at last! Well, I had to resort to drastic measures which I was dreading and delaying. Basically, I rolled back to Windows 8.1 Then Reset PC to Factory Setting. This wiped out all data and applications/programs After getting back to default Windows 8.1, I tried pairing my bluetooth mouse and it worked I then immediately installed Windows 10 (from ISO file downloaded earlier) off a USB stick I chose the option for a clean install (this doesn't load any of the ACER bloatware) Once logging into Windows 10,I went into Device Manager and uninstalled all Bluetooth drivers Then I ran the setup for the Windows 8.1 Atheros bluetooth drivers as suggested - "LITE-ON Bluetooth_M 3rd WiFi 2x2 AC+ BT M.2 QCA NFA344_3.0.0.373_W81x64" I tried pairing my mouse and Nexus 7 and it works!!! For reference, here is my setup under Windows 10 after successfully pairing bluetooth devices. btw, interesting to see that the event log still reports some error about further installation just like earlier - probably indicates that the Win 8.1 Acer drivers are not 100% compatible yet.

HT201178 how can i turn on bluetooth if my keyboard is not working

My keyboard and my mouse are not working for my Mac. Both the lights blink, indicating that they are ready to be paired but how do I turn on the blue tooth option on my computer if I can not navigate with my unresponsive keyboard?

Do you have USB KB/Mouse to use?

Bluetooth on Macbook Pro Retina not working

I am having trouble with the bluetooth on my MacBook Retina Display (software is up to date). My MacBook will not connect to my iPhone 5, nor will it connect to the bluetooth headphones I just purchased (Sony MDR-XB950BT). When I try to pair the devices to my MacBook, nothing comes up in the field of recognized devices, except for other laptops around me. Sometimes, my iPhone will show up quickly but then it will say the pair was unsuccessful. My headphones have never appeared on the devices list. However, I can connect my headphones to my iPhone perfectly fine.

I have a macbook Pro 2009. Have a bluetooth speaker device that will pair to my iphone and my husbands iphone but not the computers. He has an ibook which is I think 2006 or so. The instructions say to turn off any other bluetooths, so I did on my ipad and on my phone but on my computer it will NOT shut off. I am using Yosemite. I have no other devices paired to my computer.
The bluetooth may not have been able to be turned off in previous systems, I don't know I haven't looked in a long time. I'm not even sure it is working even though it says it is on. Someone on another post in mavericks said to archive and install system. I don't know what it meant by archive and I don't want to reinstall the system. Every thing works accept for this far as I know and I don't want to reinstall again. Leave well enough alone is what usually works.

My bluetooth on r007 tx is not working

Similar Messages

Maybe you are looking for