My Bluetooth USB wireless transmitter for my portable speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. Can anybody help?
My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?
Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out.
Similar Messages
-
I've connected my device through a wifi network and i accidentally signed out my apple ID for imessage then when I signed back in i cant seem to get connected though my wifi connection is working just fine. can anybody help me?
I am having the same problem with my ipod nano
I have been trying since Xmas -
How do I renew a provisioning profile that has expired on my phone? I use an app for the company I work for and I cannot open it because it says the provisioning profile has expired.
i'm not quiet sure atm but should normally work like this:
connect to itunes store -> log out with ur account (upper right corner where ur apple id is displayed) -> sign in with ur wifes apple id -> activate computer (store->activate this computer)
normally it should work this way but ur wife wont be able to use apps or music within itunes library purchased with the other apple id -
Hi,
I am unable to connect facebook using HTTP_CONNECTOR component i have added all the parameters required for its authentication i.e client_id , client_secret, grant_type correct but the graph is giving the following error:
====================================================================================================================
ERROR [WatchDog_0] - Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
peer not authenticated
ERROR [WatchDog_0] - Error details:
org.jetel.exception.JetelRuntimeException: Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
at org.jetel.graph.Node.createNodeException(Node.java:535)
at org.jetel.graph.Node.run(Node.java:514)
at java.lang.Thread.run(Thread.java:722)
Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397)
at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128)
at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:572)
at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:180)
at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:151)
at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:125)
at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:641)
at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:480)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:906)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:805)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:784)
at org.jetel.component.HttpConnector.buildAndSendRequest(HttpConnector.java:1836)
at org.jetel.component.HttpConnector.process(HttpConnector.java:1803)
at org.jetel.component.HttpConnector.executeForRecord(HttpConnector.java:1947)
at org.jetel.component.HttpConnector.execute(HttpConnector.java:1914)
at org.jetel.graph.Node.run(Node.java:485)
... 1 more
============================================================================================================
Can anybody help with this ??Hi Brett,
I have installed endeca in non-ssl mode. I am trying to validate the HTTP_Connector component as shown below and its showing the following error:
and if run the graph its showing error as mention above. I am new to endeca so can you please help me that what can i do for validating this component and connecting to facebook. -
I cannot scan, the error message says I am not connected to a computer and yet I am able to print from my computer.
Why would it then be saying that I am not connected to my computer??What operating system? What router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
I WANT TO KNOW IF THE SONY BLUETOOTH Wireless Transmitter for iPod® IS COMPATIBLE WITH THIS IPOD CLASSIC 160 GB (THE OLD ONE)
According to it's page on Sony's website, it should be compatible with all Classic models.
http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10151& catalogId=10551&langId=-1&productId=8198552921665274447#features
So I would say yes.
B-rock -
How to connect my iphone 4s to a USB sound card for 5.1 speakers?
How to connect my iphone 4s to a USB sound card for 5.1 speakers?
You can't:
1. iPhone sound output is stereo, not Dolby 5.1 compatible.
2. iPhones do not connect sound output by standard USB. The connecting device has to be iPhone compatible. -
I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?
I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
Cheers
Guy -
Hi I wonder if anyone as had a similar problem to mine in as much as that i can no longer conect my i phone to my car radio as it says in the settings that both my bluetooth and wi-fi are switched off and are greyed out,PLEASE CAN ANYBODY HELP.
Tap Settings App > General > Reset > Reset Network Settings. See if fixed. If not, Restore iPhone Firmware with iTunes 10.7 or 11 on computer. See if fixed. If not, and there is Warranty or AppleCare make Genius reservation and take iPhone to Apple for resolution.
-
I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.
The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
Temporarily disable wireless encryption.
If you are hidding the SSID, disable that feature.
Change the Mode Select setting to: 802.11g Only
Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11 -
i restarted my ipod touch and it ran out of power half way,now it will charge for one little bar and then start restarting again without charging until it runs out, it also wont show up on itunes, can you help me
the only other thing i can think of is the put the ipod into recovery mode
but as itunes cant find it, it may not work
hold the power button for 3sec's keep holding the power button now also hold in the home buttton the screen goes black
now let go of the power button keep the home held in the screen goes blue and shows the itunes with the cd and the up arrow with the usb cable, connect to itunes to start recovery mode.
or take it to an apple store fore them to help with recovery mode but this can take up to 3hrs
or try out www.ipodsurgery.co.uk -
I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?
Sometimes deleting the account and then re-creating it can solve this issue
Write down all the information in accounts before doing this
Highlight the account on the left and click the minus button
Then click the plus button to add the new account and follow the prompts -
I desperately need to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in library but this folder is empty in my library. Can anybody help me?
I looked for plugs in in my library but the folder internet plugs in is empty
-
I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. But in my purchased item library it indicates that you update iPhoto. I am not sure which account the aps store asking. Can someone resolve this problem.
Contact App Store support. They're the folks who can help with Account issues.
Regards
TD -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
How to Capture print jobs and Data with WIN32 API?
My organization has about 5 network printers and copiers to which a computer can print. What I'd like to do is build, if possible, a simple JAVA program to intercept what the users are printing (from any application) and capture certain information a
-
Could I Return the Macbook if...?
I've been reading the numerous posts regarding the mooing and whining of the macbook. It's extremely important to me to have a Macbook that runs silent. I've been hearing some report there is a whining and mooing, others report no sound at all. If I
-
How to change the title of an existing document?
I have looked in online manuals and there are no headings for this. I wish to change the title of an existing documents but can find no way to do so. Any one have help on this?
-
Question about pass file name and path to file write adapter
I need to pass file name and path to file adapter for write. I got partial answers from thread Re: Get File name using File Adapter , but seems InboundHeader_msg or outboundHeader_msg only takes file name, how do I pass file directory? since I still
-
Hi, I am running Data-Driven test on different machines with different input values in .CSV file in batch mode.we are facing following problem: Test not considering modified values in .CSV file until we recompile the test. Is there any way to avo